Mink MI 1502 BV/BP - M.C.SchroederMink MI 1502 BV/BP Dry Rotary Claw Pressure or Vacuum Pumps...
Transcript of Mink MI 1502 BV/BP - M.C.SchroederMink MI 1502 BV/BP Dry Rotary Claw Pressure or Vacuum Pumps...
Mink
MI 1502 BV/BP
Dry Rotary Claw Pressure or Vacuum Pumps
Description
The Busch Mink MI 1502 is a single-stage, dry rotary claw-type, positive displacement pump designed for either pressure or vacuum applications.
Vacuum or pressure is produced by two non-contacting rotors in an oil-free pumping chamber. The dry, non-contacting design makes the Mink ideal for pneumatic conveying, printing, soil remediation, and any application where dust particles may be present. Wearing parts are separated from the pumping chamber which leads to a longer pump life with low maintenance.
Features
• Non-contacting design
• Dry (oil-free) pumping chamber
• Air-cooled
• Low maintenance – no wear in pumping chamber
• Simple, modular construction
• Suitable for variable speed applications
• Integral relief valve
MinkMink
MI 1502 BV/BPMI 1502 BV/BP
MI 1502 BV
Standard Equipment
• TEFC motor
• Vibration isolators
• Base frame
• Electric cooling fan
• Oil sight glass
• Grease zerk fittings
• Pressure relief valve (pressure models)
• Inlet filter (pressure models)
• Inlet silencer (pressure models)
• Anti-suck-back valve on inlet (vacuum models)
• Inlet screen (vacuum models)
• Vacuum relief valve (vacuum models)
• Discharge silencer (vacuum models)
Operating Principle
Dry Rotary Claw Pressure or Vacuum Pumps
Inlet
DischargeClaw
Operating Principle
Inside the pump housing, two claw shaped rotors take in air as they rotate in opposite directions. The air is compressed by the rotors, then discharged through a silencer to atmosphere. The non-return valve incorporated into the inlet flange prevents air from back flowing into the pumping chamber when the pump is turned off.
Mink MI dry rotary claw direct drive pumps are driven by a C-face motor, and the two rotors are synchronized by gears. A wide range of accessories allows optimum adaptation to many applications.
Applications
• Wood industry
• Pneumatic conveying
• Transport and lifting systems
• Medical technology
• Central vacuum systems
• Packaging
• Plastics
• Food processing
• Printing
• Ceramics and brick
• Environmental technology
• Vacuum sewage
• Textiles
• Paper industry
• Beverage industry
Accessories
• Variable frequency drives
• Pressure transmitters
• Inlet filters
Technical Data
Pumping Speed vs. Discharge Pressure
Vacuum (”Hg)
Pum
ping
Spe
ed (
AC
FM)
Inlet Pressure (Torr)
02.46.310.214.218.122.026.029.92350
300
250
200
150
100
50
00 100 200 300 400 500
MI 1502 BV
600 700 760
MI 1502 BP350
300
250
200
150
100
50
00 5 10 15 20 25
Discharge Pressure (PSIG)
Pum
ping
Spe
ed (
SCFM
)
Pumping Speed vs. Inlet Pressure
Technical Data
Nominal pumping speed
Nominal pumping speed
Free air displacement
End vacuum
End vacuum
Maximum pressure
Motor rating
Motor speed
Approximate weight
Sound rating*
ACFM
SCFM
CFM
"Hg
Torr
PSIG
HP
RPM
Lbs.
dB(A)
1502 BV
325
–
376
23.4
165
–
15
3600
950
88
1502 BP
–
325
376
–
–
29.4
40
3600
1350
92
*DIN EN ISO 2151Performance data based on ambient conditions of 14.7 PSIA and 70o F, and have a tolerance of +/- 10%.
02-10/10Models and specifications are subject to change without notice
Dimensions
Dry Rotary Claw Pressure or Vacuum Pumps
All dimensions in inches unless otherwise noted.
Mink MI 1502 BV
Mink MI 1502 BP
Busch LLC 516 Viking Drive Virginia Beach, VA 23452Phone (757) 463-7800 Fax (757) 463-7407
Busch - all over the world in industry
Amsterdam Auckland Bangkok Barcelona Basel Birmingham Brno Brussels Budapest Buenos Aires Copenhagen Dublin Gothenborg Helsinki Istanbul Johannesburg Kuala Lumpur
Maulburg Melbourne Milan Monterrey Montreal Moscow New York Oslo Paris Pune Santiago de Chile São Paulo Seoul Shanghai Singapore Taipei Tel Aviv Tokyo Vienna Warsaw
www.buschusa.com1-800-USA-PUMP
ISO 9001 Registered Company
51 1/4“
41 “
37 “
3 3/8“
6 7/8“
Inlet3” NPT
28 1/4“
9 1/4“
Discharge3” NPT
M1214
1/8“
7 1/8“
2 “
31 1/8“
28 1/2“
435/16“
37“143/16“
1515/16“
6 7/8“
Discharge3” NPT
359/16“
145/8“
11“ 143/4“
143/16“
3“
197/8“
9 1/4“
M12
Inlet
6311/16“
3” NPT