Minitek 2008 Now it all fits together!. 3 4 5.
-
Upload
marquise-jane -
Category
Documents
-
view
219 -
download
0
Transcript of Minitek 2008 Now it all fits together!. 3 4 5.
Minitek 2008Now it all fits together!
3
4
5
6
Why Minitek?
2mm systems offer up to 38% space saving compared to 2.54mm (.100”)Minitek is the most complete system on the market, covering all types of connectionFully intermateable system: even the active latch mates with the standard headersWidely available from stock at FCI’s extensive distribution network
7
The new eject latch header has the lowest profile of its type
8
Overview of eject latch header
Based on existing shrouded header.Compatible with existing IDC cable receptacle
Different latches to accommodate strain relief if required.
9
The new active latch housing is an integral part of the series
Click!
10
Active latch housing performance
Retention per Terminal : 7.85N
Retention due to main latch :15 N MIN for 2x3 & 2x4
25 N MIN for 2x5 to 2x25
Same after 50 cycles mate / unmate
Electrical performance Contact resistance : 20m MAX
Insulation resistance : 1000 M MIN
Dielectric withstand : 650 V AC
11
Minitek Pin-in-Paste (PiP) Headers
Pin-in-Paste means using a through hole product in an SMT assembly process
Cost saving while maintaining mechanical strength of the interconnection
But it’s not as simple as it looks! FCI PiP connectors are carefully designed to avoid the pitfalls
Standoffs, pin lengths, body design all optimised
Stencil design provided, saving extensive testing and designApplication note TA-895 available on FCI web site
12
Unshrouded and Shrouded
Straight and Right Angle
Through hole and SMT
Normal profile and Stacking
Unshrouded
Shrouded
Stacking
Of course, there are all types of standard headers …
13
PCB mounted
TMT, Top Entry, 4.5mm
SMT, Top Entry, 4.5mm
SMT, Top Entry, 2.3mm
SMT, Bottom Entry, 2.3mm
Crimp-to-wire
With / without center key
Insulation-Displacement (IDC)
With / without strain relief
… and receptacles.
14
Short lead times. See new catalog due Spring
2008
Select your standard part from this catalog or the
Basics+ microsite IT’S ALL ABOUT SERVICEwww.fci.com/basics
Or get the special you need via the Basics+
Design Service
Order your fast shipment samples
online
Get the technical help you
need from
23
And Minitek is part of the Basics+ service program
15
Useful links
FCI home pagewww.fci.com
Basics+ micrositewww.fci.com/basics
Eject latch header brochurehttp://portal.fciconnect.com/res/en/pdffiles/Minitek_Eject_Latch_Header_brochure.pdf
Active latch housing brochurehttp://portal.fciconnect.com/res/en/pdffiles/Active_Latch12-12-07.pdf
Check distribution stockhttp://www.stkcheck.com/evs/fcielectronics/fcisearch.asp
16
Much more information at www.fci.com/basics