Minima

Panel Formwork System

Modular Wall Formwork system, suitable for concrete pressures up to 60kN / m2

Minima

Applications

• Walls• Columns• Buttresses• Culverts• Abutments and piers• Service Cores• Basements

• Hand Set System: Cranage requirements are minimised, saving costs

• Productivity: Up to 25m2 of clamped panels can be lifted by crane, making it more productive

• Time Savings: Fewer ties are required on Minima than many other systems, reducing time and costs

• Robust: Minima can withstand concrete pressures up to 60kN/m2, making it more safe

• Clamp design: Minima clamps make it easy for panel to panel connection, increasing speed of erection

• Easy stripping: Inner corners have a 2-degree stripping clearance, making stripping easier

• Panel Range: Has a range of 18 panel sizes which minimises the need for traditional make-up pieces, saving project time

• Versatility: A variety of internal and external corner panels, some of which are hinged, helps to get the exact angle required

Features & Benefits

Panels

• Minima’s lighter weight panels weigh only 30kg/m2 allowing most panels to be set by hand

• Minima’s panels are available in 16 standard sizes, including the largest panel 2.7 x 2.4m, as well as 3 multi-purpose panels all in three heights of 2.7m, 1.5m and 1.2m

• Minima has an extensive range of accessories, which makes working with panels much easier

2700 x 900

Description Code Weight (kg) Area (m 2) Minima Panel 2.7 x 2.4m MMX22724 283.7 6.48 Minima Panel 2.7 x 0.9m MMX22790 69.1 2.43 Minima Panel 2.7 x 0.75m MMX22775 60.0 2.03 Minima Panel 2.7 x 0.6m MMX22760 53.2 1.62 Minima Panel 2.7 x 0.45m MMX22745 45.4 1.22 Minima Panel 27 x 0.3m MMX22730 38.9 0.81

Panel 2.7m

Description Code Weight (kg) Area (m2) Minima Panel 1.5 x 0.9m MMX21590 41.4 1.35 Minima Panel 1.5 x 0.75m MMX21575 35.9 1.13 Minima Panel 1.5 x 0.6m MMX21560 31.1 0.90 Minima Panel 1.5 x 0.45m MMX21545 26.5 0.68 Minima Panel 1.5 x 0.3m MMX21530 22.6 0.45

Panel 1.5m

1500 x 900

Panels

1200 x 900

Panel 1.2m

Item Code Weight (kg) Area (m2) Minima Panel 1.2 x 0.9m MMX21290 38.5 1.08Minima Panel 1.2 x 0.75m MMX21275 33.5 0.90Minima Panel 1.2 x 0.6m MMX21260 29.2 0.72Minima Panel 1.2 x 0.45m MMX21245 24.0 0.54Minima Panel 1.2 x 0.3m MMX21230 18.7 0.36

Item Code Weight (kg) Minima MP Panel 2.7 x 0.7m MMX42770 60.1

Minima MP Panel 1.5 x 0.7m MMX41570 39.2 Minima MP Panel 1.2 x 0.7m MMX41270 35.5

These panels have a continuous horizontal 5cm tie hole, used in wall offsets, corners with oblique angles and pilaster strips. Particularly suitable as formwork for concrete columns up to an edge-to-edge width of 55cm.

Multi Purpose Panel

1200 x 700

Multi-purpose panels being used for producing columns

Clamps

Minima ClampEnsures joints of Minima panels are tightly closed and flush.

The Corner Clampclamps corners of two standard panels.

Adjustable ClampAllows for length adjustment up to 150mm between panels with a flush aligned joint.

Other AccessoriesInternal Corner

Minima internal corner has a leg length of 300mm and allows 2o of stripping clearance.

Hinged Corner

There are 2 types of Hinged Corners - 150 and 300. Both can form oblique-angled corners.

Edge Tie BearingThe Edge Tie Bearing is positioned at the top of Minima panels, making it easy to fit and remove and it can be positioned independently of the panel tie holes.

Minima Tension Bolt

Connects panels to the hinged corner, and is used for connecting walers for stop-ends

Walkway Bracket

Quickly connects to the back of a panel, enabling easy access.

Summary

• Lightweight:30kg/m2.

• Panels:16 sizes @ 3 heights.

• Clamps:Minima Clamp.Adjustable Clamp.Corner Clamp.

• Alignment Props:up to 3.9m.

• Corners:Fixed and Hinged.

The End