MiniLIF™ Contacts Flyer
1
www.sineco.com The unique design of our 0.7mm screw-machined contacts provide for a secure, reliable connection in any environment. All male and female contacts are machined from a highly-conductive solid Copper-alloy before being plated with Nickel and then Gold. The stainless hood that is assembled to the female contacts is designed to eliminate misalignment during mating and to ensure that, when mated, a constant, even force is maintained on the male contact. These features provide for long operational use by combining an extremely high level of mechanical reliability, low insertion force and low electrical resistance. 1.800.394.7732 [email protected] USA © 2012 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. mini-LIF High Cycle Contacts High reliability. Low insertion force. Small form factor. 0.7mm Pin 0.7mm Socket Part Number SC000216 SC000217 Contact Current Rating 2.5A (3A Max.) 2.5A (3A Max.) Temperature Range -40°C to +105°C -40°C to +105°C Pin Size Range 0.7mm only 0.7mm only Contact Resistance (after 10K cycles) 20mΩ 20mΩ Insertion Force (per contact) 20g (Min.) - 80g (Max.) 20g (Min.) - 80g (Max.) Extraction Force (per contact) 20g (Min.) - 50g (Max.) 20g (Min.) - 50g (Max.) Salt Spray Resistance 48 hours 48 hours Note: Crimp and solder versions are available. Please consult your Sales Representative. P/N: SC000217 P/N: SC000216 Flyer Number: MLCF2012
-
Upload
amphenol-sine-systems -
Category
Documents
-
view
215 -
download
0
description
The unique design of our 0.7mm screw-machined contacts provide for a secure, reliable connection in any environment. All male and female contacts are machined from a highly-conductive solid Copper-alloy before being plated with Nickel and then Gold. The stainless hood that is assembled to the female contacts is designed to eliminate misalignment during mating and to ensure that, when mated, a constant, even force is maintained on the male contact. These features provide for long operational use by combining an extremely high level of mechanical reliability, low insertion force and low electrical resistance.
Transcript of MiniLIF™ Contacts Flyer
www.sineco.com
The unique design of our 0.7mm screw-machined contacts provide for a secure, reliable connection in any environment. All male and female contacts are machined from a highly-conductive solid Copper-alloy before being plated with Nickel and then Gold. The stainless hood that is assembled to the female contacts is designed to eliminate misalignment during mating and to ensure that, when mated, a constant, even force is maintained on the male contact. These features provide for long operational use by combining an extremely high level of mechanical reliability, low insertion force and low electrical resistance.
1.800.394.7732 [email protected] USA© 2012 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice.
mini-LIFHigh Cycle Contacts
High reliability. Low insertion force. Small form factor.
0.7mm Pin 0.7mm SocketPart Number SC000216 SC000217
Contact Current Rating 2.5A (3A Max.) 2.5A (3A Max.)Temperature Range -40°C to +105°C -40°C to +105°C
Pin Size Range 0.7mm only 0.7mm onlyContact Resistance
(after 10K cycles) 20mΩ 20mΩ
Insertion Force(per contact) 20g (Min.) - 80g (Max.) 20g (Min.) - 80g (Max.)
Extraction Force(per contact) 20g (Min.) - 50g (Max.) 20g (Min.) - 50g (Max.)
Salt Spray Resistance 48 hours 48 hoursNote: Crimp and solder versions are available. Please consult your Sales Representative.
P/N: SC000217P/N: SC000215 P/N: SC000216
Flyer Number: MLCF2012
