Mini-ComTM Shielded Jack Modules - TG Style Termination...TERMINATION STEPS 6 EGJT 5 Do not...
Transcript of Mini-ComTM Shielded Jack Modules - TG Style Termination...TERMINATION STEPS 6 EGJT 5 Do not...
-
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS © Panduit Corp. 2017 PN366P
Page 1 of 3
Strain relief clip
Jack
Wire capBlue - Cat. 6AWhite - Cat. 6Red - Cat. 5e
2.00"(50.8mm)
DrainWire
CWST
S/FTP
Individual foil pair screen
Conductors
Braid
U/FTP
Individual foil pair screen
Conductors
Drain wire
F/UTP
Overall foil screen
Conductors
Drain wire
SF/UTP
Overall foil screen
Conductors
Braid
2.00"(50.8mm)
0.50"(12.7mm)
CWST
0.50"(12.7mm)
CWST2.00"
(50.8mm)
2.00"(50.8mm)
0.50"(12.7mm)
Drain Wire
CWST
Mini-ComTM Shielded Jack Modules - TG Style Termination
Part Numbers: CJS6X88TG**Y, CJSK6X88TG**, CJSQ6X88TGBL, CJSH6X88TG**Y, CJS688TG**Y, CJSK688TG**, CJSQ688TGBL, CJSH688TG**Y, CJS5E88TG**Y, CJSK5E88TG**, CJSH5E88TG**Y
** = color.
CABLE PREPARATION STEPS
-
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS © Panduit Corp. 2017 PN366P
Page 2 of 3
TERMINATION STEPS
6EGJT
5
Do not pre-arrange conductors.
(OR)
4
F
R
32
0.5"(12.7mm)
1
Trim pair separator and/or ripcord, if present.
7 T568B Wiring
(OR)
1.
1. 2.
R
F
R
F
T568A Wiring7
(OR)
1.
1.
R
F
R
F
2.
2.
-
INSTALLATION INSTRUCTIONS © Panduit Corp. 2017 PN366P
For Instructions in Local Languagesand Technical Support:
www.panduit.com/resources/install_maintain.asp www.panduit.com
E-mail:[email protected]
Phone: 866-405-6654
Page 3 of 3
REMOVAL STEPS
1 2 3
Notes:1. For specified performance, follow TIA/EIA 568-C installation guidelines.2. Shielded jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter.3. Shielded jack modules may be re-terminated a minimum of 20 times.4. For technical and performance information, contact Panduit Technical Support.5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels.
As with all Communication Components, the following statements apply:1. Never install communications wiring during a lightning storm.2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.4. Use caution when installing or modifying communication wiring.
11EGJT
12 13
Grounding Kit,
(See note 5)CJSGK-X
8 Trim conductorsflush
9
Trim drain wire,if present
10