MINEMESH · •ally designed for ground support in metalliferous Specific mines •ange of sizes to...
Transcript of MINEMESH · •ally designed for ground support in metalliferous Specific mines •ange of sizes to...
MINEMESH®
Ground Support Solutions for Metalliferous Mining Applications
Mining with OneSteel Reinforcing
Benefits of using OneSteel Reinforcing MINEMESH®
• Over 25 years experience in developing and manufacturing MINEMESH®
• Exclusively manufactured by OneSteel using quality Australian steel
• Three MINEMESH® manufacturing facilities across Australia
• Split Set Mining Systems are a preferred distributor of MINEMESH®
• Integrated ground support solutions package
• Proven solution for scat control leading to increased safety for personnel
• Products can be designed for mine specific solutions
• Quality tested and traceable from machine to mine
• National technical support, design services and backup
• Extensive network of branches servicing the mining industry.
REINV
ENTING
MINEMESH
www.reinforcing.co
m
www.rei
nforcing. tv
• Specifically designed for ground support in metalliferous
mines
• Range of sizes to suit roadway width and bolting patterns
• Restricts roof strata failure between bolts
• Improved scat control from roof through roadway system
• Increased safety for both personnel and equipment
• Easy to handle and install.
• Manufactured from quality Australian steel
• Suits full range of bolting and installation systems
• Range of sizes to suit roadway width and bolting patterns
• Can be supplied in 4, 5 or 5.6 mm wire diameters
• Available in both black and galvanized forms
• Packaged to suit mine site handling requirements
• Packs are securely bundled to ensure safe transportation and storage.
MINEMESH® features• Standard sheet size is normally 3 x 2.4 m
• Available in other sizes as required
e.g. 4 x 2.4 m, 4.5 x 1.7 m, 6 x 2.4 m
• Manufactured from 4, 5 or 5.6 mm wire
• Available in both galvanized and black wire
• Used for strata control across backs and shoulders
of development.
Mesh Modules
Performance & Productivity Benefits
TYPICAL SPECIFICATION - MESH MODULE
WIRE MODULE
Diameter (mm)
Force Capacity
(kN)
Wire Spacing
(mm)
Width (m)
Length (m)
Longitudinal Wires
55.6
1014
100100
3 - 63 - 6
Cross Wires5
5.61014
100100
1.2 - 2.41.2 - 2.4
MINEMESH® Products for Metalliferous Mining Applications
www.reinforcing.com
• Increases safety by providing additional surface support
when used in conjunction with rock bolts and MINEMESH®
• Straps are pulled into the rock surface by bolts and
conform to major irregularities in the rock surface
• Assists in restraining loose rock that may be ejected from
between bolts in areas experiencing poor ground conditions
(e.g. fault zones, squeezing ground, seismicity)
• Light weight and easy to handle and install
• Designed to conform to a range of bolting patterns
• Can be used in conjunction with shotcrete.
Performance & Productivity Benefits
Mesh Straps
MINEMESH® Products for Metalliferous Mining Applications
• Normally 250 mm wide but can be manufactured wider
• Length: 3 to 6 m
• Double Wire configuration or as single wire option
• Supplied in both black and galvanized forms
• Available as flat sheets or bent sides to increase rigidity
• Provides additional support in conjunction with roof
modules or rib mesh where poor ground conditions are
being experienced.
TYPICAL SPECIFICATION - MESH STRAPS
WIRE STRAP
Diameter (mm)
Force Capacity
(kN)
Wire Spacing
(mm)
Width (mm)
Length (m)
Longitudinal Wires
5.68
1430
Various100
3 - 6 3 - 6
Cross Wires58
1030
Various100
250250
3 - 6 3 - 6
Split Set® Mining Systems
Split Set Friction Rock Stabilisers provide reliable
support in a wide range of ground conditions.
Comprising just two parts: a bearer plate and a slotted
tube, which is driven into a slightly smaller hole,
Split Sets exert radial pressure over their full length to
better cope with ground movement.
• Manufactured in Australia by Phoenix Metalform:
ISO9002 certified
• 100,000s supplied to metalliferous and mining
industries each year
• Easy to handle and install, no special tools required
• National design, technical support and distribution
network.
www.reinforcing.com
Queensland
Trevor Land Phone : 07 4774 6464 Mobile : 0419 312 945 [email protected]
New South Wales
Roger Moore Phone : 02 4571 3176 Mobile : 0418 612 490 [email protected]
South Australia
Trevor Griffiths Phone : 08 8563 0971 Mobile : 0419 556 950 [email protected]
Western Australia
Shanon Mills - Perth Phone : 08 9351 3100 Mobile : 0418 942 985 [email protected]
Tony Catlow - Kalgoorlie Phone : 08 9021 3944 Mobile : 0418 942 121 [email protected]
Mining with OneSteel Reinforcing REINV
ENTING
MINEMESH
www.reinforcing.co
m
www.rei
nforcing. tv
This information is provided as a service to those interested in steel reinforcement. Since the information is provided for general guidance only, and in no way replaces the services of professional consultants on a particular projects or subjects, no legal liability can be accepted by OneSteel for its use. MINEMESH® is a registered trade mark used exclusively by OneSteel Reinforcing Pty Ltd. ABN 22 004 148 289
Product Code Black (B)
Galvanized (G)
Aperture Spacing (mm)
Wire Diameter (mm)
Length (m)
Width (m)
Mesh Modules
B2343024MINE 50 x 75 4 3 2.4
B4454512MINE 100 x 100 5 4.5 1.2
G2243024MINE 50 x 50 4 3 2.4
G4453524MINE 100 x 100 5 3.5 2.4
G445A6017MINE 100 x 100 5.6 6 1.7
Guide to Product Codes
Split Set® Mining SystemsMINEMESH® Distributor Network
OneSteel Reinforcing MINEMESH® Distributor Network
National
Graeme McGregor Manager Technical Development Phone : 02 9794 1007 Mobile : 0409 132 754 Email : [email protected]
Queensland
Bob Baird Manager MackayPhone : 07 4955 1922Mobile : 0417 549 993Email : [email protected]
Wayne Gallagher Manager TownsvillePhone : 07 4775 5100Mobile : 0407 317 196Email : [email protected]
Warren Garnon Account Manager MiningPhone : 07 4927 9155Mobile : 0419 643 084Email : [email protected]
Victoria/South Australia Tasmania
Darren Piddington State Manager SAPhone : 08 8346 8666Mobile : 0419 643 431Email : [email protected] South Wales
Jeff Farrugia Manager WollongongPhone : 02 4272 9889Mobile : 0419 396 227Email : [email protected]
Ray Campbell Manager NewcastlePhone : 02 4948 3700Mobile : 0419 274 203Email : [email protected]
John McDonell Manager Orange Phone : 02 6362 2299 Mobile : 0418 113 790 Email : [email protected]
Bernadette Duncan NSW Mining Co-ordinatorPhone : 02 4272 9889Email : [email protected]
Western Australia
Matt Richter Account Manager – MiningPhone : 08 6332 3135Mobile : 0447 441 307Email : [email protected]