![NX post processor [NX CAM]](https://static.fdocuments.in/doc/165x107/588910c81a28ab4a5c8b59e9/nx-post-processor-nx-cam.jpg)
Milliken NX UltraClear - Amazon S3€¦ · NX™ UltraClear has been designed specifically to...
2
With the introduction of NX ™ UltraClear series, transparency in sheet extrusion and thermoforming is no longer limited to PET and PS. NX ™ UltraClear has been designed specifically to provide a step change in optical properties of polypropylene (PP) sheet and thermoformed parts. PP clarified with NX ™ UltraClear enables the substitution of more expensive, less functional and less sustainable materials. NX ™ UltraClear with Millad ® NX ™ 8000 Milliken ® NX ™ UltraClear Polypropylene has the lowest density, allowing the lowest weight 18% weight reduction *15% cost reduction 1 kg PET = 57 trays 1 kg PP = 70 trays NX ™ UltraClear Polypropylene is cost efficient PET NX ™ UltraClear PP PS NX ™ UltraClear PP NX ™ UltraClear PP Benefits • Clarity • Lowest density • Lowest weight • Lower carbon footprint • Heat resistance • Easy seal, easy peel • Impact resistance • Cost efficient * Costs reduction calculated for this case study and based on price comparison NX ™ UltraClear PP sheet versus Oriented PS sheet.
Transcript of Milliken NX UltraClear - Amazon S3€¦ · NX™ UltraClear has been designed specifically to...
With the introduction of NX™ UltraClear series, transparency in sheet extrusion and thermoforming is no longer limited to PET and PS. NX™ UltraClear has been designed specifically to provide a step change in optical properties of polypropylene (PP) sheet and thermoformed parts. PP clarified with NX™ UltraClear enables the substitution of more expensive, less functional and less sustainable materials.
NX™ UltraClearwith Millad® NX™ 8000
Milliken®
NX™ UltraClear Polypropylene has the lowest density, allowing the lowest weight
18%weightreduction
*15%costreduction
1 kg PET = 57 trays 1 kg PP = 70 trays
NX™ UltraClear Polypropylene is
cost efficient
PET NX™ UltraClear PP
PS NX™ UltraClear PP
NX™ UltraClear PP Benefits• Clarity• Lowest density• Lowest weight• Lower carbon footprint• Heat resistance• Easy seal, easy peel• Impact resistance• Cost efficient
* Costs reduction calculated for this case study and based on price comparison NX™ UltraClear PP sheet versus Oriented PS sheet.
NX™ UltraClear needs to be directly fed into the extruder together with the PP resin. The suggested loading range is between 0.5% and 4.5% and can be tuned depending on the targeted transparency. Please contact Milliken for recommendations for optimal results.
Processing guidelines
Applications in sheet extrusion and thermoformingCups | Trays | Clamshells | Containers | Pots | Foldable packaging | Lids
NX™ UltraClearwith Millad® NX™ 8000
millikenchemical.com
NORTH AMERICASpartanburg, SC, USATel: 800-910-5592Fax: [email protected]
EUROPEGent, BelgiumTel: 32-9-265-1100Fax: [email protected]
LATIN AMERICASao Paulo, BrazilTel: 55-11-3043-7942Fax: [email protected]
LATIN AMERICAMexico City, MexicoTel: 52-55-3088 3600Fax: 52-55-9000 [email protected]
ASIASingaporeTel: 65-6377-0770Fax: [email protected]
ASIAShanghaiTel: 86-21 6145-5555Fax: 86-21 [email protected]
ASIAPune, IndiaTel. 91.20.6730.7501Fax. [email protected]
© Copyright 2016 Milliken & Company. All rights reserved.Millad® is a registered trademark of Milliken & Company.Milliken™ and NX™ are trademarks of Milliken & Company. See www.milliken.com/terms for exclusive sales terms.
Please contact your Milliken representative for any additional information.
PLEASE NOTE: As each customer’s use of our product may be different, information we provide, including without limitation, recommendations, test results, samples, care/labeling/processing instructions or marketing advice, is provided in good faith but without warranty and without accepting any responsibility/liability. Each customer must test and be responsible for its own specific use, further processing, labeling, marketing, etc. All sales are exclusively subject to our standard terms of sale posted at www.milliken.com/terms (all additional/different terms are rejected) unless explicitly agreed otherwise in a signed writing.
