TECHNICAL DATA SHEET

Miller PipePro Auto XCS

Product: XCS

Pg. 1/5

Miller PipePro® Auto XCS

TECHNICAL DATA SHEET

Miller PipePro Auto XCS

Product: XCS

Pg. 2/5

Digital Automatic Welding System specific for weld the root pass without backing support in the pipeline.

Note: the system needs to be feed with an electric generator having minimum output power of 6kW.

System Composed by:

CONTROL BOX

The Box contain the two Power Source Miller PipePro 400XC-CE,

Electric panel (RAD), Dual welding gas mixer for Argon –CO2, one

Display for visualize the welding parameters.

Technical data:

Length (mm): 1000

Width (mm): 1000

Height: (mm): 1200

Weight (Kg): 340 with Power Source

Feeding voltage: 48V Three phase (220V Mono phase for AC )

TECHNICAL DATA SHEET

Miller PipePro Auto XCS

Product: XCS

Pg. 3/5

WELDING BUG:

N°2 Welding bug (NO Right and LEFT bug) equipped with standard

welding torches and Standard welding wire spool (15 Kg.).

Technical data:

Length (mm): 360

Width (mm): 360

Height (mm): 330

Weight (Kg): 25 with 2,5 Kg spool – 22 with 15 Kg spool

MILLER PIPEPRO 400 XC-CE

N°2 Miller PipePro400XC-CE with Adv-Pulse program (Advanced Pulse).

The Adv-Pulse process can guarantee constant root penetration, low

spatter level and High Speed without Copper Back support.

Technical data:

Length (mm): 381

Width (mm): 705

Height (mm): 464

Weight (Kg): 57

Welding processes: Adv-Pulse, Mig, RMD, Pulsed Mig, Flux Cored, Tig,

Multi-process Welding

SPOOL HOLDER WITH MONITOR

N°2 Spool Holder complete with monitor for visualize and change the

welding parameters during the weld.

Technical data:

Length (mm): 450

Width (mm): 320

Height (mm): 555

Weight (Kg): 5 (Without spool)

TECHNICAL DATA SHEET

Miller PipePro Auto XCS

Product: XCS

Pg. 4/5

COMUNICATION AND SUPERVISOR MODULE

The module SCS is used by Miller PipePro® Auto XCS system to supervise and

to communicate.

It is located into the welding cabin and it is fixed on an isolating plate. It supplies

fast connections between all consumptions that have to enter in the welding

cabin.

Technical data:

Length (mm): 450

Width (mm): 320

Height (mm): 555

Weight (Kg): 5 (Without spool)

SET of CONTROL and POWER CABLES

Set of Control and Power Cables are composed with:

N°4 Power cables (+ and -) 95mmq – L=25mt

N°4 Power cables (+ and -) 95mmq – L=7.5mt

N°1 Control Cable L=25mt

N°2 Control Cables L=7.5mt

N°2 Cables for Monitor

N°1 Cables for Emergency

N°2 Pipe for Mix Gas

N°2 Pipe for Pneumatic

PRESSURE REDUCER FOR ARGON AND CO2

Pressure reducer group composed by: manifold to connects at the same

time 4 gas bottles, one way valves, high pressure tap, pre heater (for CO2

only) pressure reducer.

Technical data:

Inlet pressure: 300 bar Max.

Outlet pressure: 15 Bar Max.

TECHNICAL DATA SHEET

Miller PipePro Auto XCS

Product: XCS

Pg. 5/5

TRANSFORMER 380/48 V

Transformer 380V – 48V Three-phase, with voltmeter on output and

plugs for auxiliary devices 220V.

Technical Data:

Length (mm): 380

Width (mm): 610

Height (mm): 650

Weight (Kg): 75

Voltage: Input 380V 3-Phase – Output 48V 3-Phase

Power: 6KVA

Plugs for auxiliary devices: 220V

All sockets are provided of adequate circuit breaker according to the

specific loads.