MILITARY EMI FILTERS - Mouser Electronics€¦ · EMI FILTERS. Astrodyne TDI’s off-the-shelf...

MILITARYEMI FILTERS

Astrodyne TDI’s off-the-shelf military EMI filters provide military-grade specifications and performance for

MIL-STD-461, TEMPEST and RTCA/DO-160 applications. Customized and fully custom versions are offered

for more demanding applications.

Filter Series Description Current Ratings

LCR F9100 Extended Temperature Rugged COTS Single Stage Single Phase Filters 5 A to 35 A

LCR F9200 Extended Temperature Rugged COTS Dual Stage Single Phase Filters 5 A to 35 A

LCR F1928X MIL/COTS AC and DC EMI Power Line Filters 5 A to 30 A

RPM6000 MIL/COTS DC EMI Power Line Filters 5 A to 60 A




RPM7000 MIL/COTS AC, Single Phase EMI Power Line Filters 5 A to 50 A

RPM7020 MIL/COTS Compact AC, Single Phase EMI Power Line Filters 5 A to 20 A

RPM7050 MIL/COTS AC, Single Phase 1U Height EMI Power Line Filters 5 A to 30 A

RPM7200 MIL/COTS AC, Single Phase EMI Power Line Filters 5 A to 50 A

RPM8000 MIL/COTS 3-Phase WYE EMI Power Line Filters 5 A to 150 A

RPM8500 MIL/COTS 3-Phase Delta EMI Power Line Filters 5 A to 150 A

RPM9000 MIL/COTS AC, Single Phase IEC Inlet EMI Power Line Filters 5 A to 20 A

RPMC5014-63 MIL/COTS 3-Phase Delta EMI Power Line Filter 63 A

RPT5000 TEMPEST/COTS DC EMI Power Line Filters 5 A to 35 A

RPT5500 TEMPEST/COTS DC EMI Power Line Filters 5 A to 30 A

RPT5510 TEMPEST/COTS AC EMI Power Line Filters 5 A to 25 A

RPTC2001-225 TEMPEST/COTS AC 3-Phase WYE EMI Power Line Filter 225 A

RPTC2002-10 TEMPEST/COTS AC Single Phase EMI Power Line Filter 10 A






FA/FB Brick Type High Performance Dual Stage PCB Power Line Filters 5 A to 20 A

General specifications: Up to 300 VAC single phase, 400 VDC, 480 VAC 3-phase Delta and WYE, rated up to 85° C. Consult individual datasheet for details.

www.AstrodyneTDI.com

Our shielded room filters are designed to meet or exceed the requirements of MIL-STD-220 with 100 dB attenuation

from 14 KHz to10 GHz. Filters with insertion loss perfor-mance extended up to 40 GHz are available upon request.

Our HEMP filters meet point of entry requirements of MIL-STD-188-125-1 for short and intermediate pulses. These filters are fitted with high-transient suppressors in front of

the inductive input circuit, resulting in low residual currents during an EMP pulse and protecting the connected equipment.

Filter Series Description Current Ratings

LCR F Facility/Shielded Room Power Line Filters 20 A to 1600 A

LCR FH HEMP/EMI Power Line Filters 20 A to 1600 A

LCR F15000 Data, Communications, Alarm and Control Line EMI Filters 0.5 A to 5 A

LCR 058-EH EMI/HEMP Telephone, Data, Alarm and Control Line Filters 0.5 A to 5 A

MILITARY EMI/HEMPSHIELDED FACILITY

FILTERS

For over two decades, Astrodyne TDI has designed, developed and manufactured a complete range of

custom AC and DC EMI and RFI filters for the military to help our customers meet MIL-STD-461, RTCA/DO-160 and other EMC requirements. Filters are offered for all

current and voltage ratings for DC, 50/60 Hz and 400 Hz applications. We can supply custom EMI filters to support

aerospace, TEMPEST and military requirements with various levels of transient voltage protection (EMP, HEMP and

HERF). With fully equipped EMI test chambers, we also offer full EMI testing, filter design and retest for our

customer’s products and equipment to ensure they are brought into compliance quickly and cost-effectively.

CUSTOMMILITARY

FILTERS

Our custom capabilities include:• EMI and RFI Filter Design and Development• EMI Testing to MIL-STD-461, MIL-STD-220, TEMPEST, CE

and Other Standards• Product Evaluation and Pre-Compliance Testing• Problem Analysis and Assessment• EMC Consulting Services

General specifications: Up to 277/480 VAC, 1600 A, rated @ 50° C. Consult individual datasheet for details.

www.AstrodyneTDI.com

MILITARY EMI FILTERS - Mouser Electronics€¦ · EMI FILTERS. Astrodyne TDI’s off-the-shelf...

Documents

Transcript of MILITARY EMI FILTERS - Mouser Electronics€¦ · EMI FILTERS. Astrodyne TDI’s off-the-shelf...