Micropiling Rig
1
Klemm MR701 Mini Piling Rig The Klemm from Piling Equipment Specialists is a specialist mini-piling rig that has been developed especially for today’s limited access, low headroom piling market. Although compact in size it boasts a large range of features and is actually more powerful than many traditional piling rigs twice its size. Klemm MR701 comprises of a 3.5 tonne piling rig, mounted on steel crawler tracks. The Klemm incorporates a fly-by wire control system which allows the operator to manoeuvre the rig into extremely restricted access locations. Other features of the Klemm MR701 include out riggers and side tilt mast, which enables the operator to easily set up the machine on the piling platform. The Klemm MR701 has a adjustable mast angle from -5 degrees to +90 degrees which gives the added advantage of enabling the machine to carry out any drilling to the horizontal. The added feature of a 300mm diameter spotting ram moves the piling mast into tight corners. Together with the powerful HDK800 ZS-3 Motors, the Klemm MR701 is a precision controlled piling rig. The Klemm also has an extendable second mast, where up to 2.0 metres of augers/drill rods can be used together with the powerful hydraulic clamps. A 344mm diameter temporary liners are inserted with ease. Changing over the bolt on to the drive sub, enables the machine to use a Rotary Percussive Hammer up to 300mm in diameter. The Klemm MR701 is also capable of Hollow Stem, Pressure Grout Injection Piles, upto and including 300mm diameter through the gear box. The Klemm MR701 comes complete with a towable super silenced 110kW power pack, that can be detached and used up to 40.0 metres away from the piling platform. This is particularly useful when working within restricted sites. SPECIFICATIONS HEIGHT WHEN DRILLING 2700mm - 3750mm MINIMUM WIDTH 700mm MAXIMUM WIDTH 900mm WEIGHT 3.5 tonne RECOMMENDED DRILL TUBE LENGTH 1500mm ROTARY HEAD – 3 SPEED 1-97rpm MAXIMUM TORQUE – 3 SPEED 1320Nm TEAR OUT FORCE ON MAIN RAM 5 tonne MAST ANGLE 12 degrees TRACK WIDTH ADJUSTMENT 700mm - 900mm HYDRAULICS – ON BOARD 170 bar HYDRAULIC HOSES 6 x 40metres POWER PACK DEUTZ F6L912(742Kn) HEIGHT 2400mm LENGTH 4300mm WIDTH 2200mm
description
rig
Transcript of Micropiling Rig
Klemm MR701 Mini Piling Rig
The Klemm from Piling Equipment Specialists is a
specialist mini-piling rig that has been developed
especially for today’s limited access, low headroom
piling market. Although compact in size it boasts a large
range of features and is actually more powerful than
many traditional piling rigs twice its size.
Klemm MR701 comprises of a 3.5 tonne piling rig,
mounted on steel crawler tracks. The Klemm
incorporates a fly-by wire control system which allows
the operator to manoeuvre the rig into extremely restricted access locations. Other features of the
Klemm MR701 include out riggers and side tilt mast, which enables the operator to easily set up
the machine on the piling platform. The Klemm MR701 has a adjustable mast angle from -5
degrees to +90 degrees which gives the added advantage of enabling the machine to carry out
any drilling to the horizontal. The added feature of a 300mm diameter spotting ram moves the
piling mast into tight corners. Together with the powerful HDK800 ZS-3 Motors, the Klemm
MR701 is a precision controlled piling rig. The Klemm also has an extendable second mast,
where up to 2.0 metres of augers/drill rods can be used together with the powerful hydraulic
clamps. A 344mm diameter temporary liners are inserted with ease. Changing over the bolt on to
the drive sub, enables the machine to use a Rotary Percussive Hammer up to 300mm in diameter.
The Klemm MR701 is also capable of Hollow Stem, Pressure Grout Injection Piles, upto and
including 300mm diameter through the gear box.
The Klemm MR701 comes complete with a towable super silenced 110kW power pack, that can
be detached and used up to 40.0 metres away from the piling platform. This is particularly useful
when working within restricted sites.
SPECIFICATIONS
HEIGHT WHEN DRILLING 2700mm - 3750mm
MINIMUM WIDTH 700mm
MAXIMUM WIDTH 900mm
WEIGHT 3.5 tonne
RECOMMENDED DRILL TUBE LENGTH 1500mm
ROTARY HEAD – 3 SPEED 1-97rpm
MAXIMUM TORQUE – 3 SPEED 1320Nm
TEAR OUT FORCE ON MAIN RAM 5 tonne
MAST ANGLE 12 degrees
TRACK WIDTH ADJUSTMENT 700mm - 900mm
HYDRAULICS – ON BOARD 170 bar
HYDRAULIC HOSES 6 x 40metres
POWER PACK DEUTZ F6L912(742Kn)
HEIGHT 2400mm
LENGTH 4300mm
WIDTH 2200mm
