MICRON MILLING CHUCK FEATURES 20 MILLING - ERI · PDF filemicron milling chuck features 20...

MICRON MILLING CHUCK FEATURES 20

MICRON MOLD CHUCK FEATURES 21

CV40 & CV50 MICRON MILLING CHUCKS 22

BT30 & BT40 MICRON MILLING CHUCKS 22

HSK63A & HSK 100A MICRON MILLING CHUCKS 23

MILLING CHUCK ADJUSTMENT SCREWS 23

MILLING CHUCK COLLETS 24-26

MICRON MILLING CHUCK WRENCHES 27

CV40 & CV50 MICRON MOLD CHUCKS 28-29

BT40 MICRON MOLD CHUCKS 30

HSK63A & HSK100A MICRON MOLD CHUCKS 31-32

MICRON MOLD CHUCK WRENCHES 32

19

Endmills courtesy of Robb Jack Corp.www.robbjack.com

Linking Productivity and Precision

20 www.eri-america.com 877.374.8005 847.550.9710

MICRON MILLING CHUCKS Showa’S miCroN ChuCk -

the beSt meChaNiCaL ChuCk oN the market.This world class mechanical chuck has a higher level of accuracy than available hydraulically operated chucks, coupled with the inherent rigidity and great clamping power of a mechanical chuck. All of which help to improve Tool Life, Surface Finish, Dimensional Accuracy and Productivity of your machines!

Clamping Power & Minimum lnserting Depth of Cutting Tool Shank

HPC075 1180 160 1.8

HPC100 1760 180 2.0

HPC125 2450 190 2.2

78–147

ChuckSize

Clamping Power (N-m)

Tightening Force (N)

Loosening Force (N)

Minimum Shank Insertion Depth

(in)

Chuck WrenchLength (mm)

225–275

Thrust-Ring Tightening Nut

Thrust-Ring

Clamping section of body

Sliding Thrust-Ring

UNCLAMPED POSITION

CLAMPED POSITION

Face ＆ Taper contactMain body of chuck

Ball Screw mechanism

Thrust-Ringretention bearing

Mechanical Structure

FeatureS• High Clamping Power is evenly created over the shank of the tool by our innovative tapered Thrust Ring Design. • High Rigidity is created by our unique Face & Taper contact Thrust-Ring design inherently gives the chuck high rigidity since the Thrust Ring and main body of the chuck become one piece when tightened.• The Reliable Clamping system (which cannot be overtightened) is enhanced by the use of a ball screw mechanism.• Extended Toolholder Life and High Concentric Repeatability due to ball screw mechanism instead of needle roller/cage design which may cause inconsistent clamping leading to reduced gripping torque and poor concentricity.• Simple Presetting since there is no pullback of the cutting tool when the chuck is tightened.• Sub Zero Treatment is utilized on all Micron Chucks to prevent deformation of the toolholder to maintain accuracy and durability.• Micron Milling chucks are suitable for spindle speeds up to 15,000RPM. High speed and High Precision (AA Grade) versions are available upon request.

CHUCK NOSE 3D POINT

D

GRADE Nose (μm) 3D Point (μm)

TOOLHOLDER ACCURACY

Cutting tools with Cylindrical shanks (no flats) with a shank tolerance of h6 or better are recommended for optimum performance.

21

MICRON MOLD CHUCKS

HPC03M / HPC0125M HPC04M / HPC0187M HPC06M / HPC0250M HPC08M / HPC0312M HPC10M / HPC0375M HPC12M / HPC0500M

510

20～3024～3636～4842～60

200～250 200～250 200

0.79”

1.38”

1.57”

Clamping Power ＆ Minimum lnserting Length of Cutter Shank.

Chuck size Clamping Power (N·m)

Tightening Force(N)

Loosening Force(N)

Chuck wrench length(mm)

Minimum lnsertion Depth of CuttingTool Shank (in.)

3μｍ

CHUCK NOSE

5μｍ

3D POINT

3xD

D

HIGH ACCURACY…GUARANTEED LESSTHAN 5μm RUN-OUT AT 3xD

Chuck Nose 3D Point

the SLim aNd exteNded m SerieS miCroN ChuCkFor CuttiNg deeP die moLdS

The Micron M Series Milling Chucks allows for narrow-nosed, deep, hard to reach machining with high concentricity and low interference, without the need to invest in complicated, expensive mounting devices.

FeatureS• Narrow Nose design suitable for deep, hard to reach areas.• �ntegral design eliminates runout created by assembling of multiple pieces (collet-type shrink fit).• High accuracy (less than 0.0001” at nose)• Can be utilized with Carbide, Cobalt or High Speed Steel cutting tools.• Easy mechanical clamping yielding rigidity equal to a shrink fit toolholder.• Micron Mold Chucks are suitable for spindle speeds up to 15,000RPM. High speed versions are available upon request.

Cutting tools with Cylindrical shanks (no flats) with a shank tolerance of h6 or better are recommended for optimum performance.



CV40 & CV50 MICRON MILLING CHUCKS PARt NumbeR tAPeR ØD l ØD1 ØD2 l1 l2 collet SeRIeS

CV40-HPC075-105A CV40 3/4” 4.13” 1.50” 2.21” 3.34” 1.03” SC075 CV40-HPC075-135A CV40 3/4” 5.31” 1.50” 2.21” 3.34” 1.03” SC075 CV40-HPC100-105A CV40 1” 4.13” 1.73” 2.44” 3.93” 1.09” SC100 CV40-HPC100-135A CV40 1” 5.31” 1.73” 2.44” 3.93” 1.09” SC100 CV40-HPC125-105A CV40 1-1/4” 4.13” 2.05” 2.76” 3.93” 1.09” SC125 CV40-HPC125-135A CV40 1-1/4” 5.31” 2.05” 2.76” 3.93” 1.09” SC125 CV50-HPC075-105A CV50 3/4” 4.13” 1.50” 2.21” 3.34” 1.03” SC075 CV50-HPC075-135A CV50 3/4” 5.31” 1.50” 2.21” 3.34” 1.03” SC075 CV50-HPC100-105A CV50 1” 4.13” 1.73” 2.44” 3.93” 1.09” SC100 CV50-HPC100-135A CV50 1” 5.31” 1.73” 2.44” 3.93” 1.09” SC100 CV50-HPC125-105A CV50 1-1/4” 4.13” 2.05” 2.76” 3.93” 1.09” SC125 CV50-HPC125-135A CV50 1-1/4” 5.31” 2.05” 2.76” 3.93” 1.09” SC125notes: • cLaMPing ranges - HPc075 - 1/8 - 3/4” (6 - 16mm); HPc100 - 1/4 - 1” (6 - 20mm) ; HPc125 - 1/4 - 1-1/4” (6 - 25mm). • BaLanceaBLe and ForM B cooLant MiLLing cHucks are avaiLaBLe uPon reQuest. • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 27. • sc coLLets are Listed on Page 24 - 26.

BT30 & BT40 MICRON MILLING CHUCKS PARt NumbeR tAPeR ØD l ØD1 ØD2 l1 l2 collet SeRIeS

BT30-HPC075-100A BT30 3/4” 3.93” 1.50” 2.21” 3.34” 1.03” SC075 BT40-HPC075-090A BT40 3/4” 3.54” 1.50” 2.21” 3.34” 1.03” SC075 BT40-HPC075-120A BT40 3/4” 4.72” 1.50” 2.21” 3.34” 1.03” SC075 BT40-HPC100-105A BT40 1” 4.13” 1.73” 2.44” 3.93” 1.09” SC100 BT40-HPC100-135A BT40 1” 5.31” 1.73” 2.44” 3.93” 1.09” SC100 BT40-HPC125-105A BT40 1-1/4” 4.13” 2.05” 2.76” 3.93” 1.09” SC125 BT40-HPC125-135A BT40 1-1/4” 5.31” 2.05” 2.76” 3.93” 1.09” SC125notes: • cLaMPing ranges - HPc075 - 1/8 - 3/4” (6 - 16mm); HPc100 - 1/4 - 1” (6 - 20mm) ; HPc125 - 1/4 - 1-1/4” (6 - 25mm). • BaLanceaBLe and ForM B cooLant MiLLing cHucks are avaiLaBLe uPon reQuest. • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 27. • sc coLLets are Listed on Page 24 - 26. • Metric siZes are avaiLaBLe uPon reQuest.

23

PARt NumbeR tAPeR ØD l ØD1 ØD2 l1 l2 collet SeRIeS

HSK63A-HPC075-110A HSK63A 3/4” 4.33” 1.50” 2.21” 2.76” 1.03” SC075 HSK63A-HPC100-110A HSK63A 1” 4.33” 1.73” 2.44” 2.76” 1.09” SC100 HSK63A-HPC125-120A HSK63A 1-1/4” 4.72” 2.05” 2.76” 3.14” 1.09” SC125 HSK100A-HPC075-110A HSK100A 3/4” 4.33” 1.50” 2.21” 2.76” 1.03” SC075 HSK100A-HPC100-115A HSK100A 1” 4.52” 1.73” 2.44” 3.14” 1.09” SC100 HSK100A-HPC125-120A HSK100A 1-1/4” 4.72” 2.05” 2.76” 3.14” 1.09” SC125

notes: • cLaMPing ranges - HPc075 - 1/8 - 3/4” (6 - 16mm); HPc100 - 1/4 - 1” (6 - 20mm) ; HPc125 - 1/4 - 1-1/4” (6 - 25mm). • BaLanceaBLe and ForM B cooLant MiLLing cHucks are avaiLaBLe uPon reQuest. • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 27. • HoLders do not incLude cooLant tuBes - cooLant tuBes are Listed on Page 142. • sc coLLets are Listed on Page 24 - 26. • Metric siZes are avaiLaBLe uPon reQuest.

PARt NumbeR D l1 l2 b W m mIllINg chucK

HAS1620-05 .59” .20” .55” 5mm .20” M10x1.0 SC075 HAS1620-15 .59” .59” .55” 5mm .20” M10x1.0 SC075 HAS1620-25 .59” .98” .55” 5mm .20” M10x1.0 SC075 HAS2532-10 .91” .39” .67” 5mm .20” M18x1.0 SC100/SC125 HAS2532-20 .91” .78” .67” 5mm .20” M18x1.0 SC100/SC125 HAS2532-35 .91” 1.38” .67” 5mm .20” M18x1.0 SC100/SC125

notes: • adJustMent screWs are oPtionaL and not incLuded WitH Micron MiLLing cHucks. • adJustMent screWs are cooLant tHrougH.

MICRON MILLING CHUCK ADJUSTMENT SCREWS

HSK63A & HSK100A MICRON MILLING CHUCKS



PARt NumbeR D collet o.D.

SC075-0125 1/8” .75” SC075-0187 3/16” .75” SC075-0250 1/4” .75” SC075-0312 5/16” .75” SC075-0375 3/8” .75” SC075-0437 7/16” .75” SC075-0500 1/2” .75” SC075-0562 9/16” .75” SC075-0625 5/8” .75”

SC075 COLLETS - METRICSC075 COLLETS - INCH PARt NumbeR D collet o.D.

SC075-6 6mm .75” SC075-8 8mm .75” SC075-10 10mm .75” SC075-12 12mm .75” SC075-16 16mm .75”


SCOH075-0250 1/4” .75” SCOH075-0312 5/16” .75” SCOH075-0375 3/8” .75” SCOH075-0437 7/16” .75” SCOH075-0500 1/2” .75” SCOH075-0562 9/16” .75” SCOH075-0625 5/8” .75”

SC075 SEALED COLLETS - METRICSC075 SEALED COLLETS - INCH PARt NumbeR D collet o.D.

SCOH075-6 6mm .75” SCOH075-8 8mm .75” SCOH075-10 10mm .75” SCOH075-12 12mm .75” SCOH075-16 16mm .75”

notes: • seaLed coLLets are designed For use WitH cyLindricaL sHank tooLs WitHout FLats. • coLLets are designed For cooLant Pressure uP to 1000 Psi.

25


SC100-0250 1/4” 1.00” SC100-0312 5/16” 1.00” SC100-0375 3/8” 1.00” SC100-0437 7/16” 1.00” SC100-0500 1/2” 1.00” SC100-0562 9/16” 1.00” SC100-0625 5/8” 1.00” SC100-0750 3/4” 1.00”


SC100-6 6mm 1.00” SC100-8 8mm 1.00” SC100-10 10mm 1.00” SC100-12 12mm 1.00” SC100-16 16mm 1.00” SC100-20 20mm 1.00”


SCOH100-0250 1/4” 1.00” SCOH100-0312 5/16” 1.00” SCOH100-0375 3/8” 1.00” SCOH100-0437 7/16” 1.00” SCOH100-0500 1/2” 1.00” SCOH100-0562 9/16” 1.00” SCOH100-0625 5/8” 1.00” SCOH100-0750 3/4” 1.00”


SCOH100-6 6mm 1.00” SCOH100-8 8mm 1.00” SCOH100-10 10mm 1.00” SCOH100-12 12mm 1.00” SCOH100-16 16mm 1.00” SCOH100-20 20mm 1.00”

notes: • seaLed coLLets are designed For use WitH cyLindricaL sHank tooLs WitHout FLats. • coLLets are designed For cooLant Pressure uP to 1000 Psi.




SC125-0250 1/4” 1.25” SC125-0312 5/16” 1.25” SC125-0375 3/8” 1.25” SC125-0437 7/16” 1.25” SC125-0500 1/2” 1.25” SC125-0562 9/16” 1.25” SC125-0625 5/8” 1.25” SC125-0750 3/4” 1.25” SC125-0875 7/8” 1.25” SC125-1000 1” 1.25”


SC125-6 6mm 1.25” SC125-8 8mm 1.25” SC125-10 10mm 1.25” SC125-12 12mm 1.25” SC125-16 16mm 1.25” SC125-20 20mm 1.25” SC125-25 25mm 1.25”


SCOH125-0250 1/4” 1.25” SCOH125-0312 5/16” 1.25” SCOH125-0375 3/8” 1.25” SCOH125-0437 7/16” 1.25” SCOH125-0500 1/2” 1.25” SCOH125-0562 9/16” 1.25” SCOH125-0625 5/8” 1.25” SCOH125-0750 3/4” 1.25” SCOH125-0875 7/8” 1.25” SCOH125-1000 1” 1.25”


SCOH125-6 6mm 1.25” SCOH125-8 8mm 1.25” SCOH125-10 10mm 1.25” SCOH125-12 12mm 1.25” SCOH125-16 16mm 1.25” SCOH125-20 20mm 1.25” SCOH125-25 25mm 1.25”

27

PARt NumbeR mIllINg chucK SeRIeS

MICRON MILLING CHUCK WRENCHES

Milling Chuck Wrenches are not included with any of the Milling Chucks. Please remember to purchase the correct wrench when ordering your Micron Milling Chuck.

Thrust-Ring Tightening Nut

Thrust-Ring

Clamping section of body

Sliding Thrust-Ring

UNCLAMPED POSITION

CLAMPED POSITION

Face ＆ Taper contactMain body of chuck

Ball Screw mechanism

Thrust-Ringretention bearing

Mechanical Structure

CHUCK NOSE 3D POINT

D

GRADE Nose (μm) 3D Point (μm)

TOOLHOLDER ACCURACY

Our unique mechanical structure provides longer life, better repeatability, and higher accuracy than needle bearing milling chucks.

Two levels of accuracy are available depending upon your machining requirements.

FS52-55 HPC075 FS58-62 HPC100 FS68-75 HPC125



PARt NumbeR tAPeR ØD l ØD1 ØD2 l1 l2 l3

CV40-HPC0125M-150 CV40 1/8” 5.91” .36” .63” 3.30” 2.63” .70” CV40-HPC0125M-200 CV40 1/8” 7.87” .36” .79” 5.28” 4.01” .70” CV40-HPC0187M-150 CV40 3/16” 5.91” .42” .67” 3.30” 2.63” .78” CV40-HPC0187M-200 CV40 3/16” 7.87” .42” .83” 5.28” 4.01” .78” CV40-HPC0250M-150 CV40 1/4” 5.91” .48” .75” 3.30” 2.63” 1.41” CV40-HPC0250M-200 CV40 1/4” 7.87” .48” .91” 5.28” 4.01” 1.41” CV40-HPC0312M-150 CV40 5/16” 5.91” .55” .83” 3.30” 2.63” 1.57” CV40-HPC0312M-200 CV40 5/16” 7.87” .55” .98” 5.28” 4.01” 1.57” CV40-HPC0375M-150 CV40 3/8” 5.91” .61” .91” 3.30” 2.63” 1.57” CV40-HPC0375M-200 CV40 3/8” 7.87” .61” .91” 5.28” 4.01” 1.57” CV40-HPC0437M-150 CV40 7/16” 5.91” .67” .95” 3.30” 2.63” 1.77” CV40-HPC0437M-200 CV40 7/16” 7.87” .67” .95” 5.28” 4.01” 1.77” CV40-HPC0500M-150 CV40 1/2” 5.91” .67” .95” 3.30” 2.63” 1.77” CV40-HPC0500M-200 CV40 1/2” 7.87” .67” .95” 5.28” 4.01” 1.77” CV50-HPC0125M-150 CV50 1/8” 5.91” .36” .63” 3.30” 2.63” .70” CV50-HPC0125M-200 CV50 1/8” 7.87” .36” .79” 5.28” 4.01” .70” CV50-HPC0187M-150 CV50 3/16” 5.91” .42” .67” 3.30” 2.63” .78” CV50-HPC0187M-200 CV50 3/16” 7.87” .42” .83” 5.28” 4.01” .78” CV50-HPC0250M-150 CV50 1/4” 5.91” .48” .75” 3.30” 2.63” 1.41” CV50-HPC0250M-200 CV50 1/4” 7.87” .48” .91” 5.28” 4.01” 1.41” CV50-HPC0312M-150 CV50 5/16” 5.91” .55” .83” 3.30” 2.63” 1.57” CV50-HPC0312M-200 CV50 5/16” 7.87” .55” .98” 5.28” 4.01” 1.57” CV50-HPC0375M-150 CV50 3/8” 5.91” .61” .91” 3.30” 2.63” 1.57” CV50-HPC0375M-200 CV50 3/8” 7.87” .61” .91” 5.28” 4.01” 1.57” CV50-HPC0437M-150 CV50 7/16” 5.91” .67” .95” 3.30” 2.63” 1.77” CV50-HPC0437M-200 CV50 7/16” 7.87” .67” .95” 5.28” 4.01” 1.77” CV50-HPC0500M-150 CV50 1/2” 5.91” .67” .95” 3.30” 2.63” 1.77” CV50-HPC0500M-200 CV50 1/2” 7.87” .67” .95” 5.28” 4.01” 1.77”notes: • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 32. • cutting tooLs WitH cyLindricaL sHanks (no FLats) WitH a sHank toLerance oF H6 or Better are recoMMended For oPtiMuM PerForMance. • see Page 21 For MiniMuM insertion dePtHs.

CV40 & CV50 MICRON MOLD CHUCKS - INCH

29


CV40-HPC03M-150 CV40 3 150 9 16 84 67 18 CV40-HPC03M-200 CV40 3 200 9 20 134 102 18 CV40-HPC04M-150 CV40 4 150 10 17 84 67 20 CV40-HPC04M-200 CV40 4 200 10 21 134 102 20 CV40-HPC06M-150 CV40 6 150 12 19 84 67 36 CV40-HPC06M-200 CV40 6 200 12 23 134 102 36 CV40-HPC08M-150 CV40 8 150 14 21 84 67 50 CV40-HPC08M-200 CV40 8 200 14 25 134 102 50 CV40-HPC10M-150 CV40 10 150 16 23 84 67 50 CV40-HPC10M-200 CV40 10 200 16 27 134 102 50 CV40-HPC12M-150 CV40 12 150 18 25 84 67 55 CV40-HPC12M-200 CV40 12 200 18 29 134 102 55 CV50-HPC03M-150 CV50 3 150 9 16 84 67 18 CV50-HPC03M-200 CV50 3 200 9 20 134 102 18 CV50-HPC04M-150 CV50 4 150 10 17 84 67 20 CV50-HPC04M-200 CV50 4 200 10 21 134 102 20 CV50-HPC06M-150 CV50 6 150 12 19 84 67 36 CV50-HPC06M-200 CV50 6 200 12 23 134 102 36 CV50-HPC08M-150 CV50 8 150 14 21 84 67 50 CV50-HPC08M-200 CV50 8 200 14 25 134 102 50 CV50-HPC10M-150 CV50 10 150 16 23 84 67 50 CV50-HPC10M-200 CV50 10 200 16 27 134 102 50 CV50-HPC12M-150 CV50 12 150 18 25 84 67 55 CV50-HPC12M-200 CV50 12 200 18 29 134 102 55

CV40 & CV50 MICRON MOLD CHUCKS - METRIC

notes: • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 32. • cutting tooLs WitH cyLindricaL sHanks (no FLats) WitH a sHank toLerance oF H6 or Better are recoMMended For oPtiMuM PerForMance. • see Page 21 For MiniMuM insertion dePtHs.




BT40-HPC0125M-135 BT40 1/8” 5.31” .36” .63” 3.30” 2.63” .70” BT40-HPC0125M-185 BT40 1/8” 7.28” .36” .79” 5.28” 4.01” .70” BT40-HPC0187M-135 BT40 3/16” 5.31” .42” .67” 3.30” 2.63” .78” BT40-HPC0187M-185 BT40 3/16” 7.28” .42” .83” 5.28” 4.01” .78” BT40-HPC0250M-135 BT40 1/4” 5.31” .48” .75” 3.30” 2.63” 1.41” BT40-HPC0250M-185 BT40 1/4” 7.28” .48” .91” 5.28” 4.01” 1.41” BT40-HPC0312M-135 BT40 5/16” 5.31” .55” .83” 3.30” 2.63” 1.57” BT40-HPC0312M-185 BT40 5/16” 7.28” .55” .98” 5.28” 4.01” 1.57” BT40-HPC0375M-135 BT40 3/8” 5.31” .61” .91” 3.30” 2.63” 1.57” BT40-HPC0375M-185 BT40 3/8” 7.28” .61” .91” 5.28” 4.01” 1.57” BT40-HPC0437M-135 BT40 7/16” 5.31” .67” .95” 3.30” 2.63” 1.77” BT40-HPC0437M-185 BT40 7/16” 7.28” .67” .95” 5.28” 4.01” 1.77” BT40-HPC0500M-135 BT40 1/2” 5.31” .67” .95” 3.30” 2.63” 1.77” BT40-HPC0500M-185 BT40 1/2” 7.28” .67” .95” 5.28” 4.01” 1.77”

BT40 MICRON MOLD CHUCKS - INCH


BT40-HPC03M-135 BT40 3 135 9 16 84 67 18 BT40-HPC03M-185 BT40 3 185 9 20 134 102 18 BT40-HPC04M-135 BT40 4 135 10 17 84 67 20 BT40-HPC04M-185 BT40 4 185 10 21 134 102 20 BT40-HPC06M-135 BT40 6 135 12 19 84 67 36 BT40-HPC06M-185 BT40 6 185 12 23 134 102 36 BT40-HPC08M-135 BT40 8 135 14 21 84 67 50 BT40-HPC08M-185 BT40 8 185 14 25 134 102 50 BT40-HPC10M-135 BT40 10 135 16 23 84 67 50 BT40-HPC10M-185 BT40 10 185 16 27 134 102 50 BT40-HPC12M-135 BT40 12 135 18 25 84 67 55 BT40-HPC12M-185 BT40 12 185 18 29 134 102 55

BT40 MICRON MOLD CHUCKS - METRIC

notes: • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 32.

31


HSK63A-HPC0125M-150 HSK63A 1/8” 5.91” .36” .63” 3.30” 2.63” .70” HSK63A-HPC0125M-200 HSK63A 1/8” 7.87” .36” .79” 5.28” 4.01” .70” HSK63A-HPC0187M-150 HSK63A 3/16” 5.91” .42” .67” 3.30” 2.63” .78” HSK63A-HPC0187M-200 HSK63A 3/16” 7.87” .42” .83” 5.28” 4.01” .78” HSK63A-HPC0250M-150 HSK63A 1/4” 5.91” .48” .75” 3.30” 2.63” 1.41” HSK63A-HPC0250M-200 HSK63A 1/4” 7.87” .48” .91” 5.28” 4.01” 1.41” HSK63A-HPC0312M-150 HSK63A 5/16” 5.91” .55” .83” 3.30” 2.63” 1.57” HSK63A-HPC0312M-200 HSK63A 5/16” 7.87” .55” .98” 5.28” 4.01” 1.57” HSK63A-HPC0375M-150 HSK63A 3/8” 5.91” .61” .91” 3.30” 2.63” 1.57” HSK63A-HPC0375M-200 HSK63A 3/8” 7.87” .61” .91” 5.28” 4.01” 1.57” HSK63A-HPC0437M-150 HSK63A 7/16” 5.91” .67” .95” 3.30” 2.63” 1.77” HSK63A-HPC0437M-200 HSK63A 7/16” 7.87” .67” .95” 5.28” 4.01” 1.77” HSK63A-HPC0500M-150 HSK63A 1/2” 5.91” .67” .95” 3.30” 2.63” 1.77” HSK63A-HPC0500M-200 HSK63A 1/2” 7.87” .67” .95” 5.28” 4.01” 1.77” HSK100A-HPC0125M-155 HSK100A 1/8” 6.10” .36” .63” 3.30” 2.63” .70” HSK100A-HPC0125M-205 HSK100A 1/8” 8.07” .36” .79” 5.28” 4.01” .70” HSK100A-HPC0187M-155 HSK100A 3/16” 6.10” .42” .67” 3.30” 2.63” .78” HSK100A-HPC0187M-205 HSK100A 3/16” 8.07” .42” .83” 5.28” 4.01” .78” HSK100A-HPC0250M-155 HSK100A 1/4” 6.10” .48” .75” 3.30” 2.63” 1.41” HSK100A-HPC0250M-205 HSK100A 1/4” 8.07” .48” .91” 5.28” 4.01” 1.41” HSK100A-HPC0312M-155 HSK100A 5/16” 6.10” .55” .83” 3.30” 2.63” 1.57” HSK100A-HPC0312M-205 HSK100A 5/16” 8.07” .55” .98” 5.28” 4.01” 1.57” HSK100A-HPC0375M-155 HSK100A 3/8” 6.10” .61” .91” 3.30” 2.63” 1.57” HSK100A-HPC0375M-205 HSK100A 3/8” 8.07” .61” .91” 5.28” 4.01” 1.57” HSK100A-HPC0437M-155 HSK100A 7/16” 6.10” .67” .95” 3.30” 2.63” 1.77” HSK100A-HPC0437M-205 HSK100A 7/16” 8.07” .67” .95” 5.28” 4.01” 1.77” HSK100A-HPC0500M-155 HSK100A 1/2” 6.10” .67” .95” 3.30” 2.63” 1.77” HSK100A-HPC0500M-205 HSK100A 1/2” 8.07” .67” .95” 5.28” 4.01” 1.77”

HSK63A & HSK100A MICRON MOLD CHUCKS - INCH

notes: • sPanner WrencHes are not incLuded. tHey Must Be PurcHased seParateLy. PLease see Page 32. • cutting tooLs WitH cyLindricaL sHanks (no FLats) WitH a sHank toLerance oF H6 or Better are recoMMended For oPtiMuM PerForMance. • see Page 21 For MiniMuM insertion dePtHs.




HSK63A-HPC03M-150 HSK63A 3 150 9 16 84 67 18 HSK63A-HPC03M-200 HSK63A 3 200 9 20 134 102 18 HSK63A-HPC04M-150 HSK63A 4 150 10 17 84 67 20 HSK63A-HPC04M-200 HSK63A 4 200 10 21 134 102 20 HSK63A-HPC06M-150 HSK63A 6 150 12 19 84 67 36 HSK63A-HPC06M-200 HSK63A 6 200 12 23 134 102 36 HSK63A-HPC08M-150 HSK63A 8 150 14 21 84 67 50 HSK63A-HPC08M-200 HSK63A 8 200 14 25 134 102 50 HSK63A-HPC10M-150 HSK63A 10 150 16 23 84 67 50 HSK63A-HPC10M-200 HSK63A 10 200 16 27 134 102 50 HSK63A-HPC12M-150 HSK63A 12 150 18 25 84 67 55 HSK63A-HPC12M-200 HSK63A 12 200 18 29 134 102 55 HSK100A-HPC03M-155 HSK100A 3 155 9 16 84 67 18 HSK100A-HPC03M-205 HSK100A 3 205 9 20 134 102 18 HSK100A-HPC04M-155 HSK100A 4 155 10 17 84 67 20 HSK100A-HPC04M-205 HSK100A 4 205 10 21 134 102 20 HSK100A-HPC06M-155 HSK100A 6 155 12 19 84 67 36 HSK100A-HPC06M-205 HSK100A 6 205 12 23 134 102 36 HSK100A-HPC08M-155 HSK100A 8 155 14 21 84 67 50 HSK100A-HPC08M-205 HSK100A 8 205 14 25 134 102 50 HSK100A-HPC10M-155 HSK100A 10 155 16 23 84 67 50 HSK100A-HPC10M-205 HSK100A 10 205 16 27 134 102 50 HSK100A-HPC12M-155 HSK100A 12 155 18 25 84 67 55 HSK100A-HPC12M-205 HSK100A 12 205 18 29 134 102 55notes: • sPanner WrencHes are not incLuded and Must Be PurcHased seParateLy. PLease see BeLoW.

HSK63A & HSK100A MICRON MOLD CHUCKS - METRIC

PARt NumbeR mIllINg chucK SeRIeS

FP45-48 HPC M

MICRON MOLD CHUCK WRENCH

Milling Chuck Wrenches are not included with any of the Milling Chucks. Please remember to purchase the correct wrench when ordering your Micron Milling Chuck.

MICRON MILLING CHUCK FEATURES 20 MILLING - ERI · PDF filemicron milling chuck features 20...

Documents

Transcript of MICRON MILLING CHUCK FEATURES 20 MILLING - ERI · PDF filemicron milling chuck features 20...