Micro Tools - KYOCERA SGS Precision Tools · reduction in macro particle deposition on the tool...
Transcript of Micro Tools - KYOCERA SGS Precision Tools · reduction in macro particle deposition on the tool...
Micro Tools
Solid Carbide Tools
www.ksptmicrotools.com
New Expanded Offering
ISO 9001 Certi�ed
Solid Carbide Tools
KYOCERA SGS Precision Tools (KSPT) is an ISO-certi�ed manufacturer of industry leading round solid carbide
cutting tools. State of the art manufacturing and warehouse facilities have the capacity and processes to meet the
quality and delivery demands of customers in all markets around the world. Complete inspections performed
within its metallurgical lab and manufacturing quality departments ensure the use of high quality carbide and
reliable manufacturing consistency regardless of when a cutting tool is produced.
KSPT is proud to have pioneered some of the world’s most advanced cutting technologies due to rigorous testing of
tools, coatings, and materials within its Global Innovation Center. It is this commitment to innovation that has
launched patented products and technologies like the Z-Carb with its variable geometry and cutting edge prepara-
tion, Series 43 APR® and APF® ultra high performance aluminum cutting tools, and the JetStream coolant technology.
SGS has become an important part of the KYOCERA Precision Tools family, and while the name has changed, one
thing has not. Its dedicated people and their relentless commitment to the customer. KSPT Technical Sales Engi-
neers, Application Specialists, and Distribution Partners blanket the globe, delivering reliable service and support
to all market segments. It is these people and products that drive innovative application strategies and cutting tool
technologies into the end user, continually exceeding expectations and providing the most Value at the Spindle.®
FRACTIONALSERIES DESCRIPTION PAGEM2 2 Flute Square 1.5xD. . . . . . . . . . . . . . . . . . . . .6 2 Flute Square 3xD . . . . . . . . . . . . . . . . . . . . . .8 2 Flute Square 3xD, 8xD Overall Reach . . . .10 2 Flute Square 3xD, 12xD Overall Reach . . .11M2B 2 Flute Ball 1.5xD. . . . . . . . . . . . . . . . . . . . . . .12 2 Flute Ball 3xD . . . . . . . . . . . . . . . . . . . . . . . .14 2 Flute Ball 3xD, 8xD Overall Reach . . . . . . .16 2 Flute Ball 3xD, 12xD Overall Reach . . . . . .17M3 3 Flute Square 1.5xD, 3xD Overall Reach. . .18 3 Flute Square 1.5xD, 5xD Overall Reach. . .19 3 Flute Square 1.5xD, 8xD Overall Reach. . .20 3 Flute Square 1.5xD, 12xD Overall Reach. .21 3 Flute Square 1.5xD, 15xD Overall Reach. .22 3 Flute Square 1.5xD, 20xD Overall Reach. .23 3 Flute Square 1.5xD, 25xD Overall Reach. .24M3B 3 Flute Ball 1.5xD, 3xD Overall Reach. . . . . .25 3 Flute Ball 1.5xD, 5xD Overall Reach. . . . . .26 3 Flute Ball 1.5xD, 8xD Overall Reach. . . . . .27 3 Flute Ball 1.5xD, 12xD Overall Reach. . . . .28 3 Flute Ball 1.5xD, 15xD Overall Reach. . . . .29 3 Flute Ball 1.5xD, 20xD Overall Reach. . . . .30 3 Flute Ball 1.5xD, 25xD Overall Reach. . . . .31M4 4 Flute Square 1.5xD. . . . . . . . . . . . . . . . . . . .32 4 Flute Square 3xD . . . . . . . . . . . . . . . . . . . . .34 4 Flute Square 3xD, 8xD Overall Reach . . . .36 4 Flute Square 3xD, 12xD Overall Reach . . .37M4L 4 Flute Square 5xD . . . . . . . . . . . . . . . . . . . . .38M4E 4 Flute Square 8xD . . . . . . . . . . . . . . . . . . . . .39M4X 4 Flute Square 12xD . . . . . . . . . . . . . . . . . . . .40M4B 4 Flute Ball 1.5xD. . . . . . . . . . . . . . . . . . . . . . .41 4 Flute Ball 3xD . . . . . . . . . . . . . . . . . . . . . . . .43 4 Flute Ball 3xD, 8xD Overall Reach . . . . . . .45 4 Flute Ball 3xD, 12xD Overall Reach . . . . . .46M4LB 4 Flute Ball 5xD . . . . . . . . . . . . . . . . . . . . . . . .47M4EB 4 Flute Ball 8xD . . . . . . . . . . . . . . . . . . . . . . . .48M4XB 4 Flute Ball 12xD . . . . . . . . . . . . . . . . . . . . . . .49
METRICSERIES DESCRIPTION PAGEM2M 2 Flute Square 1.5xD. . . . . . . . . . . . . . . . . . . .50 2 Flute Square 3xD . . . . . . . . . . . . . . . . . . . . .51M2MB 2 Flute Ball 1.5xD. . . . . . . . . . . . . . . . . . . . . . .52 2 Flute Ball 3xD . . . . . . . . . . . . . . . . . . . . . . . .53M4MB 4 Flute Ball 1.5xD. . . . . . . . . . . . . . . . . . . . . . .54 4 Flute Ball 3xD . . . . . . . . . . . . . . . . . . . . . . . .55
Speed & Feed Recommendations . . . . . . . . . . . . . . .56
New Expanded Tools
4 www.ksptmicrotools.com
SEM photography shows the KSPT propri-etary coating method provides a signi�cant reduction in macro particle deposition on the tool surface, which contributes to increased performance due to smoother chip �ow. Another bene�t of the KSPT micro-tool coating is a signi�cant reduction in edge rounding due to excessive thick- ness, typical of most normal coatings.
One common misconception is that coated micro tools are often unnecessary because most machines cannot reach suf�cient spindle speed to warrant the additional expense of a coated tool. Our testing shows AlTiN coating increases tool life by 250 percent, even when the cutting speed is well below that recommended for uncoated carbide. In other words, coating cost is justi�able, even at low spindle speeds.
KYOCERA SGS PRECISION TOOLS AlTiN COATING PERFORMANCE(LAB RESULTS)
120
Usa
ge (I
nche
s) 100
80
60
40
20
0UNCOATED COATED
TOOL LIFE COMPARISON4140 alloy steel / 30 HRc / dry
15000 rpm / 6 ipm / slotting to failure1/32 4-�ute carbide end mill
With excellent thermal and chemical resistance, Ti-NAMITE-A (AlTiN) allows for dry cutting and improve-ments in performance of carbide. The coating has a high hardness giving ultimate protection against abra-sive wear and erosion. Ideal for cast iron, high temperature alloys, steels, and stainless steel applications.
Hardness (HV): 3700 Oxidation Temperature: 1100°C / 2010°F Coef�cient of Friction: 0.30 Thickness: 1 – 4 Microns (based on tool diameter)
NORMAL AlTiN MICRO-TOOL COATING@ 1.06KX MAGNIFICATION
KSPT PROPRIETARY AlTiN MICRO-TOOL COATING@ 1.06KX MAGNIFICATION
5www.ksptmicrotools.com
TO ORDER: Please specify quantity and EDP number.
RETURN POLICY: An RMA number must accompany all product returns. Contact your Customer
Service Representative for an RMA number.
REGULATION SAFETY GLASSES SHOULD ALWAYS BE WORN WHEN USING HIGH-SPEED CUTTING EQUIPMENT
WARNING: This product can expose you to chemicals including Cobalt, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov
MATERIALS
Steels Stainless Steels Cast Iron High Temp Alloys
Titanium Non-Ferrous Plastics/Composites Hardened Steels
TOOL LENGTH FLUTES
2 3 4
Stub Regular Long Long Reach Extra Long 2 Flutes 3 Flutes 4 Flutes
END CONFIGURATIONS SHANK TYPE HELIX ANGLE RAKE ANGLEPOS
Ball Square Common Right Spiral Positive
All tools are in Right Cut Direction unless noted
Micro Tool Legend
USE THE TOOLWIZARD® TO:
• Calculate application parameters
• Search the KSPT catalog
• Select products based on
machining needs
TO SIGN UP FOR THE TOOLWIZARD®:
1. Visit www.kyocera-sgstool.com
2. Sign up for an account
3. Start calculating
4. Start saving
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
6 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M2 1.5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.008 1-1/2 022010.006 1/8 0.009 1-1/2 022020.007 1/8 0.011 1-1/2 022030.008 1/8 0.012 1-1/2 022040.009 1/8 0.014 1-1/2 022050.010 1/8 0.015 1-1/2 022060.011 1/8 0.017 1-1/2 022070.012 1/8 0.018 1-1/2 022080.013 1/8 0.020 1-1/2 022090.014 1/8 0.021 1-1/2 022100.015 1/8 0.023 1-1/2 022110.016 1/8 0.024 1-1/2 022120.017 1/8 0.026 1-1/2 022130.018 1/8 0.027 1-1/2 022140.019 1/8 0.029 1-1/2 022150.020 1/8 0.030 1-1/2 022160.021 1/8 0.032 1-1/2 022170.022 1/8 0.033 1-1/2 022180.023 1/8 0.035 1-1/2 022190.024 1/8 0.036 1-1/2 022200.025 1/8 0.038 1-1/2 022210.026 1/8 0.039 1-1/2 022220.027 1/8 0.041 1-1/2 022230.028 1/8 0.042 1-1/2 022240.029 1/8 0.044 1-1/2 022250.030 1/8 0.045 1-1/2 022260.031 1/8 0.047 1-1/2 022270.032 1/8 0.048 1-1/2 022280.033 1/8 0.050 1-1/2 022290.034 1/8 0.051 1-1/2 022300.035 1/8 0.053 1-1/2 022310.036 1/8 0.054 1-1/2 022320.037 1/8 0.056 1-1/2 022330.038 1/8 0.057 1-1/2 022340.039 1/8 0.059 1-1/2 022350.040 1/8 0.060 1-1/2 02236
continued on next page
FRACTIONAL
M2 1.5xD
POS
2
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
7www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M2 1.5xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.062 1-1/2 023680.042 1/8 0.063 1-1/2 023690.043 1/8 0.065 1-1/2 023700.044 1/8 0.066 1-1/2 023710.045 1/8 0.068 1-1/2 023720.046 1/8 0.069 1-1/2 023730.047 1/8 0.071 1-1/2 023740.048 1/8 0.072 1-1/2 023750.049 1/8 0.074 1-1/2 023760.050 1/8 0.075 1-1/2 023770.051 1/8 0.077 1-1/2 023780.052 1/8 0.078 1-1/2 023790.053 1/8 0.080 1-1/2 023800.054 1/8 0.081 1-1/2 023810.055 1/8 0.083 1-1/2 023820.056 1/8 0.084 1-1/2 023830.057 1/8 0.086 1-1/2 023840.058 1/8 0.087 1-1/2 023850.059 1/8 0.089 1-1/2 023860.060 1/8 0.090 1-1/2 023870.062 1/8 0.093 1-1/2 023880.065 1/8 0.098 1-1/2 023890.070 1/8 0.105 1-1/2 023900.078 1/8 0.117 1-1/2 023910.080 1/8 0.120 1-1/2 023920.085 1/8 0.128 1-1/2 023930.090 1/8 0.135 1-1/2 023940.093 1/8 0.140 1-1/2 023950.095 1/8 0.143 1-1/2 023960.100 1/8 0.150 1-1/2 023970.105 1/8 0.158 1-1/2 023980.110 1/8 0.165 1-1/2 023990.115 1/8 0.173 1-1/2 024000.120 1/8 0.180 1-1/2 02401
M2 1.5xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
8 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
2
M2 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.015 1-1/2 022750.006 1/8 0.018 1-1/2 022760.007 1/8 0.021 1-1/2 022770.008 1/8 0.024 1-1/2 022780.009 1/8 0.027 1-1/2 022790.010 1/8 0.030 1-1/2 022800.011 1/8 0.033 1-1/2 022810.012 1/8 0.036 1-1/2 022820.013 1/8 0.039 1-1/2 022830.014 1/8 0.042 1-1/2 022840.015 1/8 0.045 1-1/2 022850.016 1/8 0.048 1-1/2 022860.017 1/8 0.051 1-1/2 022870.018 1/8 0.054 1-1/2 022880.019 1/8 0.057 1-1/2 022890.020 1/8 0.060 1-1/2 022900.021 1/8 0.063 1-1/2 022910.022 1/8 0.066 1-1/2 022920.023 1/8 0.069 1-1/2 022930.024 1/8 0.072 1-1/2 022940.025 1/8 0.075 1-1/2 022950.026 1/8 0.078 1-1/2 022960.027 1/8 0.081 1-1/2 022970.028 1/8 0.084 1-1/2 022980.029 1/8 0.087 1-1/2 022990.030 1/8 0.090 1-1/2 023000.031 1/8 0.093 1-1/2 023010.032 1/8 0.096 1-1/2 023020.033 1/8 0.099 1-1/2 023030.034 1/8 0.102 1-1/2 023040.035 1/8 0.105 1-1/2 023050.036 1/8 0.108 1-1/2 023060.037 1/8 0.111 1-1/2 023070.038 1/8 0.114 1-1/2 023080.039 1/8 0.117 1-1/2 023090.040 1/8 0.120 1-1/2 02310
continued on next page
FRACTIONAL
M2 3xD
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
9www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M2 3xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.123 1-1/2 024360.042 1/8 0.126 1-1/2 024370.043 1/8 0.129 1-1/2 024380.044 1/8 0.132 1-1/2 024390.045 1/8 0.135 1-1/2 024400.046 1/8 0.138 1-1/2 024410.047 1/8 0.141 1-1/2 024420.048 1/8 0.144 1-1/2 024430.049 1/8 0.147 1-1/2 024440.050 1/8 0.150 1-1/2 024450.051 1/8 0.153 1-1/2 024460.052 1/8 0.156 1-1/2 024470.053 1/8 0.159 1-1/2 024480.054 1/8 0.162 1-1/2 024490.055 1/8 0.165 1-1/2 024500.056 1/8 0.168 1-1/2 024510.057 1/8 0.171 1-1/2 024520.058 1/8 0.174 1-1/2 024530.059 1/8 0.177 1-1/2 024540.060 1/8 0.180 1-1/2 024550.062 1/8 0.186 1-1/2 024560.065 1/8 0.195 1-1/2 024570.070 1/8 0.210 1-1/2 024580.078 1/8 0.234 1-1/2 024590.080 1/8 0.240 1-1/2 024600.085 1/8 0.255 1-1/2 024610.090 1/8 0.270 1-1/2 024620.093 1/8 0.279 1-1/2 024630.095 1/8 0.285 1-1/2 024640.100 1/8 0.300 1-1/2 024650.105 1/8 0.315 1-1/2 024660.110 1/8 0.330 1-1/2 024670.115 1/8 0.345 1-1/2 024680.120 1/8 0.360 1-1/2 02469
M2 3xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
10 www.ksptmicrotools.com
POS
2
M2 3xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.080 1-1/2 034000.015 1/8 0.045 0.120 1-1/2 034010.020 1/8 0.060 0.160 1-1/2 034020.025 1/8 0.075 0.200 1-1/2 034030.030 1/8 0.090 0.240 1-1/2 034040.031 1/8 0.093 0.248 1-1/2 034050.035 1/8 0.105 0.280 1-1/2 034060.040 1/8 0.120 0.320 1-1/2 034070.045 1/8 0.135 0.360 2 034080.047 1/8 0.141 0.376 2 034090.050 1/8 0.150 0.400 2 034100.055 1/8 0.165 0.440 2 034110.060 1/8 0.180 0.480 2 034120.062 1/8 0.186 0.496 2 034130.065 1/8 0.195 0.520 2 034140.070 1/8 0.210 0.560 2 034150.075 1/8 0.225 0.600 2 034160.078 1/8 0.234 0.624 2 034170.080 1/8 0.240 0.640 2 034180.085 1/8 0.255 0.680 2 034190.090 1/8 0.270 0.720 2 034200.093 1/8 0.279 0.744 2 034210.095 1/8 0.285 0.760 2 034220.100 1/8 0.300 0.800 2 034230.110 1/8 0.330 0.880 2 034240.115 1/8 0.345 0.920 2 034250.120 1/8 0.360 0.960 2 03426
FRACTIONAL
M2 3xD, 8xD Overall Reach
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
2D
1D
L3L2
L1
30°
15°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
11www.ksptmicrotools.com
POS
2
M2 3xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.120 1-1/2 034270.015 1/8 0.045 0.180 1-1/2 034280.020 1/8 0.060 0.240 1-1/2 034290.025 1/8 0.075 0.300 1-1/2 034300.030 1/8 0.090 0.360 2 034310.031 1/8 0.093 0.372 2 034320.035 1/8 0.105 0.420 2 034330.040 1/8 0.120 0.480 2 034340.045 1/8 0.135 0.540 2 034350.047 1/8 0.141 0.564 2 034360.050 1/8 0.150 0.600 2 034370.055 1/8 0.165 0.600 2 034380.060 1/8 0.180 0.720 2 034390.062 1/8 0.186 0.744 2 034400.065 1/8 0.195 0.780 2 034410.070 1/8 0.210 0.840 2 034420.075 1/8 0.225 0.900 2 034430.078 1/8 0.234 0.936 2-1/2 034440.080 1/8 0.240 0.960 2-1/2 034450.085 1/8 0.255 1.020 2-1/2 034460.090 1/8 0.270 1.080 2-1/2 034470.093 1/8 0.279 1.116 2-1/2 034480.095 1/8 0.285 1.140 2-1/2 034490.100 1/8 0.300 1.200 2-1/2 034500.110 1/8 0.330 1.320 2-1/2 034510.115 1/8 0.345 1.380 2-1/2 034520.120 1/8 0.360 1.440 2-1/2 03453
FRACTIONAL
M2 3xD, 12xD Overall Reach
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
2D
1D
L3L2
L1
30°
15°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
12 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
2
M2B 1.5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.008 1-1/2 030290.006 1/8 0.009 1-1/2 030300.007 1/8 0.011 1-1/2 030310.008 1/8 0.012 1-1/2 030320.009 1/8 0.014 1-1/2 030330.010 1/8 0.015 1-1/2 030340.011 1/8 0.017 1-1/2 030350.012 1/8 0.018 1-1/2 030360.013 1/8 0.020 1-1/2 030370.014 1/8 0.021 1-1/2 030380.015 1/8 0.023 1-1/2 030390.016 1/8 0.024 1-1/2 030400.017 1/8 0.026 1-1/2 030410.018 1/8 0.027 1-1/2 030420.019 1/8 0.029 1-1/2 030430.020 1/8 0.030 1-1/2 030440.021 1/8 0.032 1-1/2 030450.022 1/8 0.033 1-1/2 030460.023 1/8 0.035 1-1/2 030470.024 1/8 0.036 1-1/2 030480.025 1/8 0.038 1-1/2 030490.026 1/8 0.039 1-1/2 030500.027 1/8 0.041 1-1/2 030510.028 1/8 0.042 1-1/2 030520.029 1/8 0.044 1-1/2 030530.030 1/8 0.045 1-1/2 030540.031 1/8 0.047 1-1/2 030550.032 1/8 0.048 1-1/2 030560.033 1/8 0.050 1-1/2 030570.034 1/8 0.051 1-1/2 030580.035 1/8 0.053 1-1/2 030590.036 1/8 0.054 1-1/2 030600.037 1/8 0.056 1-1/2 030610.038 1/8 0.057 1-1/2 030620.039 1/8 0.059 1-1/2 030630.040 1/8 0.060 1-1/2 03064
continued on next page
FRACTIONAL
M2B 1.5xD
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
13www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M2B 1.5xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.062 1-1/2 025040.042 1/8 0.063 1-1/2 025050.043 1/8 0.065 1-1/2 025060.044 1/8 0.066 1-1/2 025070.045 1/8 0.068 1-1/2 025080.046 1/8 0.069 1-1/2 025090.047 1/8 0.071 1-1/2 025100.048 1/8 0.072 1-1/2 025110.049 1/8 0.074 1-1/2 025120.050 1/8 0.075 1-1/2 025130.051 1/8 0.077 1-1/2 025140.052 1/8 0.078 1-1/2 025150.053 1/8 0.080 1-1/2 025160.054 1/8 0.081 1-1/2 025170.055 1/8 0.083 1-1/2 025180.056 1/8 0.084 1-1/2 025190.057 1/8 0.086 1-1/2 025200.058 1/8 0.087 1-1/2 025210.059 1/8 0.089 1-1/2 025220.060 1/8 0.090 1-1/2 025230.062 1/8 0.093 1-1/2 025240.065 1/8 0.098 1-1/2 025250.070 1/8 0.105 1-1/2 025260.078 1/8 0.117 1-1/2 025270.080 1/8 0.120 1-1/2 025280.085 1/8 0.128 1-1/2 025290.090 1/8 0.135 1-1/2 025300.093 1/8 0.140 1-1/2 025310.095 1/8 0.143 1-1/2 025320.100 1/8 0.150 1-1/2 025330.105 1/8 0.158 1-1/2 025340.110 1/8 0.165 1-1/2 025350.115 1/8 0.173 1-1/2 025360.120 1/8 0.180 1-1/2 02537
M2B 1.5xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
14 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M2B 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.015 1-1/2 031030.006 1/8 0.018 1-1/2 031040.007 1/8 0.021 1-1/2 031050.008 1/8 0.024 1-1/2 031060.009 1/8 0.027 1-1/2 031070.010 1/8 0.030 1-1/2 031080.011 1/8 0.033 1-1/2 031090.012 1/8 0.036 1-1/2 03110 0.013 1/8 0.039 1-1/2 031110.014 1/8 0.042 1-1/2 031120.015 1/8 0.045 1-1/2 031130.016 1/8 0.048 1-1/2 031140.017 1/8 0.051 1-1/2 031150.018 1/8 0.054 1-1/2 031160.019 1/8 0.057 1-1/2 031170.020 1/8 0.060 1-1/2 031180.021 1/8 0.063 1-1/2 031190.022 1/8 0.066 1-1/2 031200.023 1/8 0.069 1-1/2 031210.024 1/8 0.072 1-1/2 031220.025 1/8 0.075 1-1/2 031230.026 1/8 0.078 1-1/2 031240.027 1/8 0.081 1-1/2 031250.028 1/8 0.084 1-1/2 031260.029 1/8 0.087 1-1/2 031270.030 1/8 0.090 1-1/2 031280.031 1/8 0.093 1-1/2 031290.032 1/8 0.096 1-1/2 031300.033 1/8 0.099 1-1/2 031310.034 1/8 0.102 1-1/2 031320.035 1/8 0.105 1-1/2 031330.036 1/8 0.108 1-1/2 031340.037 1/8 0.111 1-1/2 031350.038 1/8 0.114 1-1/2 031360.039 1/8 0.117 1-1/2 031370.040 1/8 0.120 1-1/2 03138
continued on next page
FRACTIONAL
M2B 3xD
POS
2
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
15www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M2B 3xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.123 1-1/2 025720.042 1/8 0.126 1-1/2 025730.043 1/8 0.129 1-1/2 025740.044 1/8 0.132 1-1/2 025750.045 1/8 0.135 1-1/2 025760.046 1/8 0.138 1-1/2 025770.047 1/8 0.141 1-1/2 025780.048 1/8 0.144 1-1/2 025790.049 1/8 0.147 1-1/2 025800.050 1/8 0.150 1-1/2 025810.051 1/8 0.153 1-1/2 025820.052 1/8 0.156 1-1/2 025830.053 1/8 0.159 1-1/2 025840.054 1/8 0.162 1-1/2 025850.055 1/8 0.165 1-1/2 025860.056 1/8 0.168 1-1/2 025870.057 1/8 0.171 1-1/2 025880.058 1/8 0.174 1-1/2 025890.059 1/8 0.177 1-1/2 025900.060 1/8 0.180 1-1/2 025910.062 1/8 0.186 1-1/2 025920.065 1/8 0.195 1-1/2 025930.070 1/8 0.210 1-1/2 025940.078 1/8 0.234 1-1/2 025950.080 1/8 0.240 1-1/2 025960.085 1/8 0.255 1-1/2 025970.090 1/8 0.270 1-1/2 025980.093 1/8 0.279 1-1/2 025990.095 1/8 0.285 1-1/2 026000.100 1/8 0.300 1-1/2 026010.105 1/8 0.315 1-1/2 026020.110 1/8 0.330 1-1/2 026030.115 1/8 0.345 1-1/2 026040.120 1/8 0.360 1-1/2 02605
M2B 3xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
16 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
2
M2B 3xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.080 1-1/2 036970.015 1/8 0.045 0.120 1-1/2 036980.020 1/8 0.060 0.160 1-1/2 036990.025 1/8 0.075 0.200 1-1/2 037000.030 1/8 0.090 0.240 1-1/2 037010.031 1/8 0.093 0.248 1-1/2 037020.035 1/8 0.105 0.280 1-1/2 037030.040 1/8 0.120 0.320 1-1/2 037040.045 1/8 0.135 0.360 2 037050.047 1/8 0.141 0.376 2 037060.050 1/8 0.150 0.400 2 037070.055 1/8 0.165 0.440 2 037080.060 1/8 0.180 0.480 2 037090.062 1/8 0.186 0.496 2 037100.065 1/8 0.195 0.520 2 037110.070 1/8 0.210 0.560 2 037120.075 1/8 0.225 0.600 2 037130.078 1/8 0.234 0.624 2 037140.080 1/8 0.240 0.640 2 037150.085 1/8 0.255 0.680 2 037160.090 1/8 0.270 0.720 2 037170.093 1/8 0.279 0.744 2 037180.095 1/8 0.285 0.760 2 037190.100 1/8 0.300 0.800 2 037200.110 1/8 0.330 0.880 2 037210.115 1/8 0.345 0.920 2 037220.120 1/8 0.360 0.960 2 03723
FRACTIONAL
M2B 3xD, 8xD Overall Reach
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3L2
L1
30°
15°
17www.ksptmicrotools.comEND MILLS END MILLS
POS
2
FRACTIONAL
M2B 3xD, 12xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M2B 3xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.120 1-1/2 037240.015 1/8 0.045 0.180 1-1/2 037250.020 1/8 0.060 0.240 1-1/2 037260.025 1/8 0.075 0.300 1-1/2 037270.030 1/8 0.090 0.360 2 037280.031 1/8 0.093 0.372 2 037290.035 1/8 0.105 0.420 2 037300.040 1/8 0.120 0.480 2 037310.045 1/8 0.135 0.540 2 037320.047 1/8 0.141 0.564 2 037330.050 1/8 0.150 0.600 2 037340.055 1/8 0.165 0.660 2 037350.060 1/8 0.180 0.720 2 037360.062 1/8 0.186 0.744 2 037370.065 1/8 0.195 0.780 2 037380.070 1/8 0.210 0.840 2 037390.075 1/8 0.225 0.900 2 037400.078 1/8 0.234 0.936 2-1/2 037410.080 1/8 0.240 0.960 2-1/2 037420.085 1/8 0.255 1.020 2-1/2 037430.090 1/8 0.270 1.080 2-1/2 037440.093 1/8 0.279 1.116 2-1/2 037450.095 1/8 0.285 1.140 2-1/2 037460.100 1/8 0.300 1.200 2-1/2 037470.110 1/8 0.330 1.320 2-1/2 037480.115 1/8 0.345 1.380 2-1/2 037490.120 1/8 0.360 1.440 2-1/2 03750
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3L2
L1
30°
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
18 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3 1.5xD, 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.030 2-1/2 035080.015 1/8 0.023 0.045 2-1/2 035090.020 1/8 0.030 0.060 2-1/2 035100.025 1/8 0.038 0.075 2-1/2 035110.030 1/8 0.045 0.090 2-1/2 035120.031 1/8 0.047 0.093 2-1/2 035130.035 1/8 0.053 0.105 2-1/2 035140.040 1/8 0.060 0.120 2-1/2 035150.045 1/8 0.068 0.135 2-1/2 035160.047 1/8 0.071 0.141 2-1/2 035170.050 1/8 0.075 0.150 2-1/2 035180.055 1/8 0.083 0.165 2-1/2 035190.060 1/8 0.090 0.180 2-1/2 035200.062 1/8 0.093 0.186 2-1/2 035210.065 1/8 0.098 0.195 2-1/2 035220.070 1/8 0.105 0.210 2-1/2 035230.075 1/8 0.113 0.225 2-1/2 035240.078 1/8 0.117 0.234 2-1/2 035250.080 1/8 0.120 0.240 2-1/2 035260.085 1/8 0.128 0.255 2-1/2 035270.090 1/8 0.135 0.270 2-1/2 035280.093 1/8 0.140 0.279 2-1/2 035290.095 1/8 0.143 0.285 2-1/2 035300.100 1/8 0.150 0.300 2-1/2 035310.110 1/8 0.165 0.330 2-1/2 035320.115 1/8 0.173 0.345 2-1/2 035330.120 1/8 0.180 0.360 2-1/2 03534
FRACTIONAL
M3 1.5xD, 3xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
19www.ksptmicrotools.comEND MILLS END MILLS
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
POS
3
M3 1.5xD, 5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.050 2-1/2 035350.015 1/8 0.023 0.075 2-1/2 035360.020 1/8 0.030 0.100 2-1/2 035370.025 1/8 0.038 0.125 2-1/2 035380.030 1/8 0.045 0.150 2-1/2 035390.031 1/8 0.047 0.155 2-1/2 035400.035 1/8 0.053 0.175 2-1/2 035410.040 1/8 0.060 0.200 2-1/2 035420.045 1/8 0.068 0.225 2-1/2 035430.047 1/8 0.071 0.235 2-1/2 035440.050 1/8 0.075 0.250 2-1/2 035450.055 1/8 0.083 0.275 2-1/2 035460.060 1/8 0.090 0.300 2-1/2 035470.062 1/8 0.093 0.310 2-1/2 035480.065 1/8 0.098 0.325 2-1/2 035490.070 1/8 0.105 0.350 2-1/2 035500.075 1/8 0.113 0.375 2-1/2 035510.078 1/8 0.117 0.390 2-1/2 035520.080 1/8 0.120 0.400 2-1/2 035530.085 1/8 0.128 0.425 2-1/2 035540.090 1/8 0.135 0.450 2-1/2 035550.093 1/8 0.140 0.465 2-1/2 035560.095 1/8 0.143 0.475 2-1/2 035570.100 1/8 0.150 0.500 2-1/2 035580.110 1/8 0.165 0.550 2-1/2 035590.115 1/8 0.173 0.575 2-1/2 035600.120 1/8 0.180 0.600 2-1/2 03561
FRACTIONAL
M3 1.5xD, 5xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
20 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3 1.5xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.080 2-1/2 035620.015 1/8 0.023 0.120 2-1/2 035630.020 1/8 0.030 0.160 2-1/2 035640.025 1/8 0.038 0.200 2-1/2 035650.030 1/8 0.045 0.240 2-1/2 035660.031 1/8 0.047 0.248 2-1/2 035670.035 1/8 0.053 0.280 2-1/2 035680.040 1/8 0.060 0.320 2-1/2 035690.045 1/8 0.068 0.360 2-1/2 035700.047 1/8 0.071 0.376 2-1/2 035710.050 1/8 0.075 0.400 2-1/2 035720.055 1/8 0.083 0.440 2-1/2 035730.060 1/8 0.090 0.480 2-1/2 035740.062 1/8 0.093 0.496 2-1/2 035750.065 1/8 0.098 0.520 2-1/2 035760.070 1/8 0.105 0.560 2-1/2 035770.075 1/8 0.113 0.600 2-1/2 035780.078 1/8 0.117 0.624 2-1/2 035790.080 1/8 0.120 0.640 2-1/2 035800.085 1/8 0.128 0.680 2-1/2 035810.090 1/8 0.135 0.720 2-1/2 035820.093 1/8 0.140 0.744 2-1/2 035830.095 1/8 0.143 0.760 2-1/2 035840.100 1/8 0.150 0.800 2-1/2 035850.110 1/8 0.165 0.880 2-1/2 035860.115 1/8 0.173 0.920 2-1/2 035870.120 1/8 0.180 0.960 2-1/2 03588
FRACTIONAL
M3 1.5xD, 8xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
21www.ksptmicrotools.comEND MILLS END MILLS
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
POS
3
M3 1.5xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.120 2-1/2 035890.015 1/8 0.023 0.180 2-1/2 035900.020 1/8 0.030 0.240 2-1/2 035910.025 1/8 0.038 0.300 2-1/2 035920.030 1/8 0.045 0.360 2-1/2 035930.031 1/8 0.047 0.372 2-1/2 035940.035 1/8 0.053 0.420 2-1/2 035950.040 1/8 0.060 0.480 2-1/2 035960.045 1/8 0.068 0.540 2-1/2 035970.047 1/8 0.071 0.564 2-1/2 035980.050 1/8 0.075 0.600 2-1/2 035990.055 1/8 0.083 0.660 2-1/2 036000.060 1/8 0.090 0.720 2-1/2 036010.062 1/8 0.093 0.744 2-1/2 036020.065 1/8 0.098 0.780 2-1/2 036030.070 1/8 0.105 0.840 2-1/2 036040.075 1/8 0.113 0.900 2-1/2 036050.078 1/8 0.117 0.936 2-1/2 036060.080 1/8 0.120 0.960 2-1/2 036070.085 1/8 0.128 1.020 2-1/2 036080.090 1/8 0.135 1.080 2-1/2 036090.093 1/8 0.140 1.116 2-1/2 036100.095 1/8 0.143 1.140 2-1/2 036110.100 1/8 0.150 1.200 2-1/2 036120.110 1/8 0.165 1.320 2-1/2 036130.115 1/8 0.173 1.380 2-1/2 036140.120 1/8 0.180 1.440 2-1/2 03615
FRACTIONAL
M3 1.5xD, 12xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
22 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3 1.5xD, 15xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.150 2-1/2 036160.015 1/8 0.023 0.225 2-1/2 036170.020 1/8 0.030 0.300 2-1/2 036180.025 1/8 0.038 0.375 2-1/2 036190.030 1/8 0.045 0.450 2-1/2 036200.031 1/8 0.047 0.465 2-1/2 036210.035 1/8 0.053 0.525 2-1/2 036220.040 1/8 0.060 0.600 2-1/2 036230.045 1/8 0.068 0.675 2-1/2 036240.047 1/8 0.071 0.705 2-1/2 036250.050 1/8 0.075 0.750 2-1/2 036260.055 1/8 0.083 0.825 2-1/2 036270.060 1/8 0.090 0.900 2-1/2 036280.062 1/8 0.093 0.930 2-1/2 036290.065 1/8 0.098 0.975 2-1/2 036300.070 1/8 0.105 1.050 2-1/2 036310.075 1/8 0.113 1.125 2-1/2 036320.078 1/8 0.117 1.170 2-1/2 036330.080 1/8 0.120 1.200 2-1/2 036340.085 1/8 0.128 1.275 2-1/2 036350.090 1/8 0.135 1.350 2-1/2 036360.093 1/8 0.140 1.395 3 036370.095 1/8 0.143 1.425 3 036380.100 1/8 0.150 1.500 3 036390.110 1/8 0.165 1.650 3 036400.115 1/8 0.173 1.725 3 036410.120 1/8 0.180 1.800 3 03642
FRACTIONAL
M3 1.5xD, 15xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
23www.ksptmicrotools.comEND MILLS END MILLS
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
POS
3
M3 1.5xD, 20xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.200 2-1/2 036430.015 1/8 0.023 0.300 2-1/2 036440.020 1/8 0.030 0.400 2-1/2 036450.025 1/8 0.038 0.500 2-1/2 036460.030 1/8 0.045 0.600 2-1/2 036470.031 1/8 0.047 0.620 2-1/2 036480.035 1/8 0.053 0.700 2-1/2 036490.040 1/8 0.060 0.800 2-1/2 036500.045 1/8 0.068 0.900 2-1/2 036510.047 1/8 0.071 0.940 2-1/2 036520.050 1/8 0.075 1.000 2-1/2 036530.055 1/8 0.083 1.100 2-1/2 036540.060 1/8 0.090 1.200 2-1/2 036550.062 1/8 0.093 1.240 2-1/2 036560.065 1/8 0.098 1.300 3 036570.070 1/8 0.105 1.400 3 036580.075 1/8 0.113 1.500 3 036590.078 1/8 0.117 1.560 3 036600.080 1/8 0.120 1.600 3 036610.085 1/8 0.128 1.700 3 036620.090 1/8 0.135 1.800 3 036630.093 1/8 0.140 1.860 3 036640.095 1/8 0.143 1.900 3 036650.100 1/8 0.150 2.000 4 036660.110 1/8 0.165 2.200 4 036670.115 1/8 0.173 2.300 4 036680.120 1/8 0.180 2.400 4 03669
FRACTIONAL
M3 1.5xD, 20xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
24 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3 1.5xD, 25xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.250 2-1/2 036700.015 1/8 0.023 0.375 2-1/2 036710.020 1/8 0.030 0.500 2-1/2 036720.025 1/8 0.038 0.625 2-1/2 036730.030 1/8 0.045 0.750 2-1/2 036740.031 1/8 0.047 0.775 2-1/2 036750.035 1/8 0.053 0.875 2-1/2 036760.040 1/8 0.060 1.000 2-1/2 036770.045 1/8 0.068 1.125 2-1/2 036780.047 1/8 0.071 1.175 2-1/2 036790.050 1/8 0.075 1.250 2-1/2 036800.055 1/8 0.083 1.375 3 036810.060 1/8 0.090 1.500 3 036820.062 1/8 0.093 1.550 3 036830.065 1/8 0.098 1.625 3 036840.070 1/8 0.105 1.750 3 036850.075 1/8 0.113 1.875 3 036860.078 1/8 0.117 1.950 4 036870.080 1/8 0.120 2.000 4 036880.085 1/8 0.128 2.125 4 036890.090 1/8 0.135 2.250 4 036900.093 1/8 0.140 2.325 4 036910.095 1/8 0.143 2.375 4 036920.100 1/8 0.150 2.500 4 036930.110 1/8 0.165 2.750 4 036940.115 1/8 0.173 2.875 4 036950.120 1/8 0.180 3.000 4 03696
FRACTIONAL
M3 1.5xD, 25xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°
15°
25www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M3B 1.5xD, 3xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M3B 1.5xD, 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.030 2-1/2 038050.015 1/8 0.023 0.045 2-1/2 038060.020 1/8 0.030 0.060 2-1/2 038070.025 1/8 0.038 0.075 2-1/2 038080.030 1/8 0.045 0.090 2-1/2 038090.031 1/8 0.047 0.093 2-1/2 038100.035 1/8 0.053 0.105 2-1/2 038110.040 1/8 0.060 0.120 2-1/2 038120.045 1/8 0.068 0.135 2-1/2 038130.047 1/8 0.071 0.141 2-1/2 038140.050 1/8 0.075 0.150 2-1/2 038150.055 1/8 0.083 0.165 2-1/2 038160.060 1/8 0.090 0.180 2-1/2 038170.062 1/8 0.093 0.186 2-1/2 038180.065 1/8 0.098 0.195 2-1/2 038190.070 1/8 0.105 0.210 2-1/2 038200.075 1/8 0.113 0.225 2-1/2 038210.078 1/8 0.117 0.234 2-1/2 038220.080 1/8 0.120 0.240 2-1/2 038230.085 1/8 0.128 0.255 2-1/2 038240.090 1/8 0.135 0.270 2-1/2 038250.093 1/8 0.140 0.279 2-1/2 038260.095 1/8 0.143 0.285 2-1/2 038270.100 1/8 0.150 0.300 2-1/2 038280.110 1/8 0.165 0.330 2-1/2 038290.115 1/8 0.173 0.345 2-1/2 038300.120 1/8 0.180 0.360 2-1/2 03831
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
POS
3
2D
1D
L3
L1
L2
30°15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
26 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3B 1.5xD, 5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.050 2-1/2 038320.015 1/8 0.023 0.075 2-1/2 038330.020 1/8 0.030 0.100 2-1/2 038340.025 1/8 0.038 0.125 2-1/2 038350.030 1/8 0.045 0.150 2-1/2 038360.031 1/8 0.047 0.155 2-1/2 038370.035 1/8 0.053 0.175 2-1/2 038380.040 1/8 0.060 0.200 2-1/2 038390.045 1/8 0.068 0.225 2-1/2 038400.047 1/8 0.071 0.235 2-1/2 038410.050 1/8 0.075 0.250 2-1/2 038420.055 1/8 0.083 0.275 2-1/2 038430.060 1/8 0.090 0.300 2-1/2 038440.062 1/8 0.093 0.310 2-1/2 038450.065 1/8 0.098 0.325 2-1/2 038460.070 1/8 0.105 0.350 2-1/2 038470.075 1/8 0.113 0.375 2-1/2 038480.078 1/8 0.117 0.390 2-1/2 038490.080 1/8 0.120 0.400 2-1/2 038500.085 1/8 0.128 0.425 2-1/2 038510.090 1/8 0.135 0.450 2-1/2 038520.093 1/8 0.140 0.465 2-1/2 038530.095 1/8 0.143 0.475 2-1/2 038540.100 1/8 0.150 0.500 2-1/2 038550.110 1/8 0.165 0.550 2-1/2 038560.115 1/8 0.173 0.575 2-1/2 038570.120 1/8 0.180 0.600 2-1/2 03858
FRACTIONAL
M3B 1.5xD, 5xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
27www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M3B 1.5xD, 8xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M3B 1.5xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.080 2-1/2 038590.015 1/8 0.023 0.120 2-1/2 038600.020 1/8 0.030 0.160 2-1/2 038610.025 1/8 0.038 0.200 2-1/2 038620.030 1/8 0.045 0.240 2-1/2 038630.031 1/8 0.047 0.248 2-1/2 038640.035 1/8 0.053 0.280 2-1/2 038650.040 1/8 0.060 0.320 2-1/2 038660.045 1/8 0.068 0.360 2-1/2 038670.047 1/8 0.071 0.376 2-1/2 038680.050 1/8 0.075 0.400 2-1/2 038690.055 1/8 0.083 0.440 2-1/2 038700.060 1/8 0.090 0.480 2-1/2 038710.062 1/8 0.093 0.496 2-1/2 038720.065 1/8 0.098 0.520 2-1/2 038730.070 1/8 0.105 0.560 2-1/2 038740.075 1/8 0.113 0.600 2-1/2 038750.078 1/8 0.117 0.624 2-1/2 038760.080 1/8 0.120 0.640 2-1/2 038770.085 1/8 0.128 0.680 2-1/2 038780.090 1/8 0.135 0.720 2-1/2 038790.093 1/8 0.140 0.744 2-1/2 038800.095 1/8 0.143 0.760 2-1/2 038810.100 1/8 0.150 0.800 2-1/2 038820.110 1/8 0.165 0.880 2-1/2 038830.115 1/8 0.173 0.920 2-1/2 038840.120 1/8 0.180 0.960 2-1/2 03885
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
POS
3
2D
1D
L3
L1
L2
30°15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
28 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3B 1.5xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.120 2-1/2 038860.015 1/8 0.023 0.180 2-1/2 038870.020 1/8 0.030 0.240 2-1/2 038880.025 1/8 0.038 0.300 2-1/2 038890.030 1/8 0.045 0.360 2-1/2 038900.031 1/8 0.047 0.372 2-1/2 038910.035 1/8 0.053 0.420 2-1/2 038920.040 1/8 0.060 0.480 2-1/2 038930.045 1/8 0.068 0.540 2-1/2 038940.047 1/8 0.071 0.564 2-1/2 038950.050 1/8 0.075 0.600 2-1/2 038960.055 1/8 0.083 0.660 2-1/2 038970.060 1/8 0.090 0.720 2-1/2 038980.062 1/8 0.093 0.744 2-1/2 038990.065 1/8 0.098 0.780 2-1/2 039000.070 1/8 0.105 0.840 2-1/2 039010.075 1/8 0.113 0.900 2-1/2 039020.078 1/8 0.117 0.936 2-1/2 039030.080 1/8 0.120 0.960 2-1/2 039040.085 1/8 0.128 1.020 2-1/2 039050.090 1/8 0.135 1.080 2-1/2 039060.093 1/8 0.140 1.116 2-1/2 039070.095 1/8 0.143 1.140 2-1/2 039080.100 1/8 0.150 1.200 2-1/2 039090.110 1/8 0.165 1.320 2-1/2 039100.115 1/8 0.173 1.380 2-1/2 039110.120 1/8 0.180 1.440 2-1/2 03912
FRACTIONAL
M3B 1.5xD, 12xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
29www.ksptmicrotools.comEND MILLS END MILLS
POS
3
FRACTIONAL
M3B 1.5xD, 15xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M3B 1.5xD, 15xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.150 2-1/2 039130.015 1/8 0.023 0.225 2-1/2 039140.020 1/8 0.030 0.300 2-1/2 039150.025 1/8 0.038 0.375 2-1/2 039160.030 1/8 0.045 0.450 2-1/2 039170.031 1/8 0.047 0.465 2-1/2 039180.035 1/8 0.053 0.525 2-1/2 039190.040 1/8 0.060 0.600 2-1/2 039200.045 1/8 0.068 0.675 2-1/2 039210.047 1/8 0.071 0.705 2-1/2 039220.050 1/8 0.075 0.750 2-1/2 039230.055 1/8 0.083 0.825 2-1/2 039240.060 1/8 0.090 0.900 2-1/2 039250.062 1/8 0.093 0.930 2-1/2 039260.065 1/8 0.098 0.975 2-1/2 039270.070 1/8 0.105 1.050 2-1/2 039280.075 1/8 0.113 1.125 2-1/2 039290.078 1/8 0.117 1.170 2-1/2 039300.080 1/8 0.120 1.200 2-1/2 039310.085 1/8 0.128 1.275 2-1/2 039320.090 1/8 0.135 1.350 2-1/2 039330.093 1/8 0.140 1.395 3 039340.095 1/8 0.143 1.425 3 039350.100 1/8 0.150 1.500 3 039360.110 1/8 0.165 1.650 3 039370.115 1/8 0.173 1.725 3 039380.120 1/8 0.180 1.800 3 03939
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
30 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
3
M3B 1.5xD, 20xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.200 2-1/2 039400.015 1/8 0.023 0.300 2-1/2 039410.020 1/8 0.030 0.400 2-1/2 039420.025 1/8 0.038 0.500 2-1/2 039430.030 1/8 0.045 0.600 2-1/2 039440.031 1/8 0.047 0.620 2-1/2 039450.035 1/8 0.053 0.700 2-1/2 039460.040 1/8 0.060 0.800 2-1/2 039470.045 1/8 0.068 0.900 2-1/2 039480.047 1/8 0.071 0.940 2-1/2 039490.050 1/8 0.075 1.000 2-1/2 039500.055 1/8 0.083 1.100 2-1/2 039510.060 1/8 0.090 1.200 2-1/2 039520.062 1/8 0.093 1.240 2-1/2 039530.065 1/8 0.098 1.300 3 039540.070 1/8 0.105 1.400 3 039550.075 1/8 0.113 1.500 3 039560.078 1/8 0.117 1.560 3 039570.080 1/8 0.120 1.600 3 039580.085 1/8 0.128 1.700 3 039590.090 1/8 0.135 1.800 3 039600.093 1/8 0.140 1.860 3 039610.095 1/8 0.143 1.900 3 039620.100 1/8 0.150 2.000 4 039630.110 1/8 0.165 2.200 4 039640.115 1/8 0.173 2.300 4 039650.120 1/8 0.180 2.400 4 03966
FRACTIONAL
M3B 1.5xD, 20xD Overall Reach
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
31www.ksptmicrotools.comEND MILLS END MILLS
POS
3
FRACTIONAL
M3B 1.5xD, 25xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M3B 1.5xD, 25xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 0.250 2-1/2 039670.015 1/8 0.023 0.375 2-1/2 039680.020 1/8 0.030 0.500 2-1/2 039690.025 1/8 0.038 0.625 2-1/2 039700.030 1/8 0.045 0.750 2-1/2 039710.031 1/8 0.047 0.775 2-1/2 039720.035 1/8 0.053 0.875 2-1/2 039730.040 1/8 0.060 1.000 2-1/2 039740.045 1/8 0.068 1.125 2-1/2 039750.047 1/8 0.071 1.175 2-1/2 039760.050 1/8 0.075 1.250 2-1/2 039770.055 1/8 0.083 1.375 3 039780.060 1/8 0.090 1.500 3 039790.062 1/8 0.093 1.550 3 039800.065 1/8 0.098 1.625 3 039810.070 1/8 0.105 1.750 3 039820.075 1/8 0.113 1.875 3 039830.078 1/8 0.117 1.950 4 039840.080 1/8 0.120 2.000 4 039850.085 1/8 0.128 2.125 4 039860.090 1/8 0.135 2.250 4 039870.093 1/8 0.140 2.325 4 039880.095 1/8 0.143 2.375 4 039890.100 1/8 0.150 2.500 4 039900.110 1/8 0.165 2.750 4 039910.115 1/8 0.173 2.875 4 039920.120 1/8 0.180 3.000 4 03993
• Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
32 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M4 1.5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.008 1-1/2 022380.006 1/8 0.009 1-1/2 022390.007 1/8 0.011 1-1/2 022400.008 1/8 0.012 1-1/2 022410.009 1/8 0.014 1-1/2 022420.010 1/8 0.015 1-1/2 022430.011 1/8 0.017 1-1/2 022440.012 1/8 0.018 1-1/2 022450.013 1/8 0.020 1-1/2 022460.014 1/8 0.021 1-1/2 022470.015 1/8 0.023 1-1/2 022480.016 1/8 0.024 1-1/2 022490.017 1/8 0.026 1-1/2 022500.018 1/8 0.027 1-1/2 022510.019 1/8 0.029 1-1/2 022520.020 1/8 0.030 1-1/2 022530.021 1/8 0.032 1-1/2 022540.022 1/8 0.033 1-1/2 022550.023 1/8 0.035 1-1/2 022560.024 1/8 0.036 1-1/2 022570.025 1/8 0.038 1-1/2 022580.026 1/8 0.039 1-1/2 022590.027 1/8 0.041 1-1/2 022600.028 1/8 0.042 1-1/2 022610.029 1/8 0.044 1-1/2 022620.030 1/8 0.045 1-1/2 022630.031 1/8 0.047 1-1/2 022640.032 1/8 0.048 1-1/2 022650.033 1/8 0.050 1-1/2 022660.034 1/8 0.051 1-1/2 022670.035 1/8 0.053 1-1/2 022680.036 1/8 0.054 1-1/2 022690.037 1/8 0.056 1-1/2 022700.038 1/8 0.057 1-1/2 022710.039 1/8 0.059 1-1/2 022720.040 1/8 0.060 1-1/2 02273
continued on next page
FRACTIONAL
M4 1.5xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
33www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M4 1.5xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.062 1-1/2 024020.042 1/8 0.063 1-1/2 024030.043 1/8 0.065 1-1/2 024040.044 1/8 0.066 1-1/2 024050.045 1/8 0.068 1-1/2 024060.046 1/8 0.069 1-1/2 024070.047 1/8 0.071 1-1/2 024080.048 1/8 0.072 1-1/2 024090.049 1/8 0.074 1-1/2 024100.050 1/8 0.075 1-1/2 024110.051 1/8 0.077 1-1/2 024120.052 1/8 0.078 1-1/2 024130.053 1/8 0.080 1-1/2 024140.054 1/8 0.081 1-1/2 024150.055 1/8 0.083 1-1/2 024160.056 1/8 0.084 1-1/2 024170.057 1/8 0.086 1-1/2 024180.058 1/8 0.087 1-1/2 024190.059 1/8 0.089 1-1/2 024200.060 1/8 0.090 1-1/2 024210.062 1/8 0.093 1-1/2 024220.065 1/8 0.098 1-1/2 024230.070 1/8 0.105 1-1/2 024240.078 1/8 0.117 1-1/2 024250.080 1/8 0.120 1-1/2 024260.085 1/8 0.128 1-1/2 024270.090 1/8 0.135 1-1/2 024280.093 1/8 0.140 1-1/2 024290.095 1/8 0.143 1-1/2 024300.100 1/8 0.150 1-1/2 024310.105 1/8 0.158 1-1/2 024320.110 1/8 0.165 1-1/2 024330.115 1/8 0.173 1-1/2 024340.120 1/8 0.180 1-1/2 02435
M4 1.5xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
34 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.005–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M4 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.005 1/8 0.015 1-1/2 023120.006 1/8 0.018 1-1/2 023130.007 1/8 0.021 1-1/2 023140.008 1/8 0.024 1-1/2 023150.009 1/8 0.027 1-1/2 023160.010 1/8 0.030 1-1/2 023170.011 1/8 0.033 1-1/2 023180.012 1/8 0.036 1-1/2 023190.013 1/8 0.039 1-1/2 023200.014 1/8 0.042 1-1/2 023210.015 1/8 0.045 1-1/2 023220.016 1/8 0.048 1-1/2 023230.017 1/8 0.051 1-1/2 023240.018 1/8 0.054 1-1/2 023250.019 1/8 0.057 1-1/2 023260.020 1/8 0.060 1-1/2 023270.021 1/8 0.063 1-1/2 023280.022 1/8 0.066 1-1/2 023290.023 1/8 0.069 1-1/2 023300.024 1/8 0.072 1-1/2 023310.025 1/8 0.075 1-1/2 023320.026 1/8 0.078 1-1/2 023330.027 1/8 0.081 1-1/2 023340.028 1/8 0.084 1-1/2 023350.029 1/8 0.087 1-1/2 023360.030 1/8 0.090 1-1/2 023370.031 1/8 0.093 1-1/2 023380.032 1/8 0.096 1-1/2 023390.033 1/8 0.099 1-1/2 023400.034 1/8 0.102 1-1/2 023410.035 1/8 0.105 1-1/2 023420.036 1/8 0.108 1-1/2 023430.037 1/8 0.111 1-1/2 023440.038 1/8 0.114 1-1/2 023450.039 1/8 0.117 1-1/2 023460.040 1/8 0.120 1-1/2 02347
continued on next page
FRACTIONAL
M4 3xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
35www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL
M4 3xD
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.041 1/8 0.123 1-1/2 024700.042 1/8 0.126 1-1/2 024710.043 1/8 0.129 1-1/2 024720.044 1/8 0.132 1-1/2 024730.045 1/8 0.135 1-1/2 024740.046 1/8 0.138 1-1/2 024750.047 1/8 0.141 1-1/2 024760.048 1/8 0.144 1-1/2 024770.049 1/8 0.147 1-1/2 024780.050 1/8 0.150 1-1/2 024790.051 1/8 0.153 1-1/2 024800.052 1/8 0.156 1-1/2 024810.053 1/8 0.159 1-1/2 024820.054 1/8 0.162 1-1/2 024830.055 1/8 0.165 1-1/2 024840.056 1/8 0.168 1-1/2 024850.057 1/8 0.171 1-1/2 024860.058 1/8 0.174 1-1/2 024870.059 1/8 0.177 1-1/2 024880.060 1/8 0.180 1-1/2 024890.062 1/8 0.186 1-1/2 024900.065 1/8 0.195 1-1/2 024910.070 1/8 0.210 1-1/2 024920.078 1/8 0.234 1-1/2 024930.080 1/8 0.240 1-1/2 024940.085 1/8 0.255 1-1/2 024950.090 1/8 0.270 1-1/2 024960.093 1/8 0.279 1-1/2 024970.095 1/8 0.285 1-1/2 024980.100 1/8 0.300 1-1/2 024990.105 1/8 0.315 1-1/2 025000.110 1/8 0.330 1-1/2 025010.115 1/8 0.345 1-1/2 025020.120 1/8 0.360 1-1/2 02503
M4 3xDFRACTIONAL SERIES
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
36 www.ksptmicrotools.comEND MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
POS
4
M4 3xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.080 1-1/2 034540.015 1/8 0.045 0.120 1-1/2 034550.020 1/8 0.060 0.160 1-1/2 034560.025 1/8 0.075 0.200 1-1/2 034570.030 1/8 0.090 0.240 1-1/2 034580.031 1/8 0.093 0.248 1-1/2 034590.035 1/8 0.105 0.280 1-1/2 034600.040 1/8 0.120 0.320 1-1/2 034610.045 1/8 0.135 0.360 2 034620.047 1/8 0.141 0.376 2 034630.050 1/8 0.150 0.400 2 034640.055 1/8 0.165 0.440 2 034650.060 1/8 0.180 0.480 2 034660.062 1/8 0.186 0.496 2 034670.065 1/8 0.195 0.520 2 034680.070 1/8 0.210 0.560 2 034690.075 1/8 0.225 0.600 2 034700.078 1/8 0.234 0.624 2 034710.080 1/8 0.240 0.640 2 034720.085 1/8 0.255 0.680 2 034730.090 1/8 0.270 0.720 2 034740.093 1/8 0.279 0.744 2 034750.095 1/8 0.285 0.760 2 034760.100 1/8 0.300 0.800 2 034770.110 1/8 0.330 0.880 2 034780.115 1/8 0.345 0.920 2 034790.120 1/8 0.360 0.960 2 03480
FRACTIONAL
M4 3xD, 8xD Overall Reach
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
37www.ksptmicrotools.comEND MILLS END MILLS
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
POS
4
M4 3xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.120 1-1/2 034810.015 1/8 0.045 0.180 1-1/2 034820.020 1/8 0.060 0.240 1-1/2 034830.025 1/8 0.075 0.300 1-1/2 034840.030 1/8 0.090 0.360 2 034850.031 1/8 0.093 0.372 2 034860.035 1/8 0.105 0.420 2 034870.040 1/8 0.120 0.480 2 034880.045 1/8 0.135 0.540 2 034890.047 1/8 0.141 0.564 2 034900.050 1/8 0.150 0.600 2 034910.055 1/8 0.165 0.660 2 034920.060 1/8 0.180 0.720 2 034930.062 1/8 0.186 0.744 2 034940.065 1/8 0.195 0.780 2 034950.070 1/8 0.210 0.840 2 034960.075 1/8 0.225 0.900 2 034970.078 1/8 0.234 0.936 2-1/2 034980.080 1/8 0.240 0.960 2-1/2 034990.085 1/8 0.255 1.020 2-1/2 035000.090 1/8 0.270 1.080 2-1/2 035010.093 1/8 0.279 1.116 2-1/2 035020.095 1/8 0.285 1.140 2-1/2 035030.100 1/8 0.300 1.200 2-1/2 035040.110 1/8 0.330 1.320 2-1/2 035050.115 1/8 0.345 1.380 2-1/2 035060.120 1/8 0.360 1.440 2-1/2 03507
FRACTIONAL
M4 3xD, 12xD Overall Reach
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
1D
L3
L1
L2
30°15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
38 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M4L 5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.050 2-1/2 026400.015 1/8 0.075 2-1/2 026410.020 1/8 0.100 2-1/2 026420.025 1/8 0.125 2-1/2 026430.030 1/8 0.150 2-1/2 026440.031 1/8 0.155 2-1/2 026450.035 1/8 0.175 2-1/2 026460.040 1/8 0.200 2-1/2 026470.045 1/8 0.225 2-1/2 026480.047 1/8 0.235 2-1/2 026490.050 1/8 0.250 2-1/2 026500.055 1/8 0.275 2-1/2 026510.060 1/8 0.300 2-1/2 026520.062 1/8 0.310 2-1/2 026530.065 1/8 0.325 2-1/2 026540.070 1/8 0.350 2-1/2 026550.075 1/8 0.375 2-1/2 026560.078 1/8 0.390 2-1/2 026570.080 1/8 0.400 2-1/2 026580.085 1/8 0.425 2-1/2 026590.090 1/8 0.450 2-1/2 026600.093 1/8 0.465 2-1/2 026610.095 1/8 0.475 2-1/2 026620.100 1/8 0.500 2-1/2 026630.110 1/8 0.550 2-1/2 026640.115 1/8 0.575 2-1/2 026650.120 1/8 0.600 2-1/2 02666
FRACTIONAL
M4L 5xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
39www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
FRACTIONAL
M4E 8xD
POS
4
M4E 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.080 2-1/2 026670.015 1/8 0.120 2-1/2 026680.020 1/8 0.160 2-1/2 026690.025 1/8 0.200 2-1/2 026700.030 1/8 0.240 2-1/2 026710.031 1/8 0.248 2-1/2 026720.035 1/8 0.280 2-1/2 026730.040 1/8 0.320 2-1/2 026740.045 1/8 0.360 2-1/2 026750.047 1/8 0.376 2-1/2 026760.050 1/8 0.400 2-1/2 026770.055 1/8 0.440 2-1/2 026780.060 1/8 0.480 2-1/2 026790.062 1/8 0.496 2-1/2 026800.065 1/8 0.520 2-1/2 026810.070 1/8 0.560 2-1/2 026820.075 1/8 0.600 2-1/2 026830.078 1/8 0.624 2-1/2 026840.080 1/8 0.640 2-1/2 026850.085 1/8 0.680 2-1/2 026860.090 1/8 0.720 2-1/2 026870.093 1/8 0.744 2-1/2 026880.095 1/8 0.760 2-1/2 026890.100 1/8 0.800 2-1/2 026900.110 1/8 0.880 2-1/2 026910.115 1/8 0.920 2-1/2 026920.120 1/8 0.960 2-1/2 02693
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (inch)
.015–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
40 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
M4X 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.015 1/8 0.180 2-1/2 026940.020 1/8 0.240 2-1/2 026950.025 1/8 0.300 2-1/2 026960.030 1/8 0.360 2-1/2 026970.031 1/8 0.372 2-1/2 026980.035 1/8 0.420 2-1/2 026990.040 1/8 0.480 2-1/2 027000.045 1/8 0.540 2-1/2 027010.047 1/8 0.564 2-1/2 027020.050 1/8 0.600 2-1/2 027030.055 1/8 0.660 2-1/2 027040.060 1/8 0.720 2-1/2 027050.062 1/8 0.744 2-1/2 027060.065 1/8 0.780 2-1/2 027070.070 1/8 0.840 2-1/2 027080.075 1/8 0.900 2-1/2 027090.078 1/8 0.936 2-1/2 027100.080 1/8 0.960 2-1/2 027110.085 1/8 1.020 2-1/2 027120.090 1/8 1.080 2-1/2 027130.093 1/8 1.116 2-1/2 027140.095 1/8 1.140 2-1/2 027150.100 1/8 1.200 2-1/2 027160.110 1/8 1.320 2-1/2 027170.115 1/8 1.380 2-1/2 027180.120 1/8 1.440 2-1/2 02719
FRACTIONAL
M4X 12xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
41www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
FRACTIONAL
M4B 1.5xD
POS
4
M4B 1.5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.015 1-1/2 030710.011 1/8 0.017 1-1/2 030720.012 1/8 0.018 1-1/2 030730.013 1/8 0.020 1-1/2 030740.014 1/8 0.021 1-1/2 030750.015 1/8 0.023 1-1/2 030760.016 1/8 0.024 1-1/2 030770.017 1/8 0.026 1-1/2 030780.018 1/8 0.027 1-1/2 030790.019 1/8 0.029 1-1/2 030800.020 1/8 0.030 1-1/2 030810.021 1/8 0.032 1-1/2 030820.022 1/8 0.033 1-1/2 030830.023 1/8 0.035 1-1/2 030840.024 1/8 0.036 1-1/2 030850.025 1/8 0.038 1-1/2 030860.026 1/8 0.039 1-1/2 030870.027 1/8 0.041 1-1/2 030880.028 1/8 0.042 1-1/2 030890.029 1/8 0.044 1-1/2 030900.030 1/8 0.045 1-1/2 030910.031 1/8 0.047 1-1/2 030920.032 1/8 0.048 1-1/2 030930.033 1/8 0.050 1-1/2 030940.034 1/8 0.051 1-1/2 030950.035 1/8 0.053 1-1/2 030960.036 1/8 0.054 1-1/2 030970.037 1/8 0.056 1-1/2 030980.038 1/8 0.057 1-1/2 030990.039 1/8 0.059 1-1/2 031000.040 1/8 0.060 1-1/2 031010.041 1/8 0.062 1-1/2 025380.042 1/8 0.063 1-1/2 02539
continued on next page
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
42 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M4B 1.5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.043 1/8 0.065 1-1/2 025400.044 1/8 0.066 1-1/2 025410.045 1/8 0.068 1-1/2 025420.046 1/8 0.069 1-1/2 025430.047 1/8 0.071 1-1/2 025440.048 1/8 0.072 1-1/2 025450.049 1/8 0.074 1-1/2 025460.050 1/8 0.075 1-1/2 025470.051 1/8 0.077 1-1/2 025480.052 1/8 0.078 1-1/2 025490.053 1/8 0.080 1-1/2 025500.054 1/8 0.081 1-1/2 025510.055 1/8 0.083 1-1/2 025520.056 1/8 0.084 1-1/2 025530.057 1/8 0.086 1-1/2 025540.058 1/8 0.087 1-1/2 025550.059 1/8 0.089 1-1/2 025560.060 1/8 0.090 1-1/2 025570.062 1/8 0.093 1-1/2 025580.065 1/8 0.098 1-1/2 025590.070 1/8 0.105 1-1/2 025600.078 1/8 0.117 1-1/2 025610.080 1/8 0.120 1-1/2 025620.085 1/8 0.128 1-1/2 025630.090 1/8 0.135 1-1/2 025640.093 1/8 0.140 1-1/2 025650.095 1/8 0.143 1-1/2 025660.100 1/8 0.150 1-1/2 025670.105 1/8 0.158 1-1/2 025680.110 1/8 0.165 1-1/2 025690.115 1/8 0.173 1-1/2 025700.120 1/8 0.180 1-1/2 02571
FRACTIONAL
M4B 1.5xD
POS
4
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
43www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
FRACTIONAL
M4B 3xD
POS
4
M4B 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 1-1/2 031450.011 1/8 0.033 1-1/2 031460.012 1/8 0.036 1-1/2 031470.013 1/8 0.039 1-1/2 031480.014 1/8 0.042 1-1/2 031490.015 1/8 0.045 1-1/2 031500.016 1/8 0.048 1-1/2 031510.017 1/8 0.051 1-1/2 031520.018 1/8 0.054 1-1/2 031530.019 1/8 0.057 1-1/2 031540.020 1/8 0.060 1-1/2 031550.021 1/8 0.063 1-1/2 031560.022 1/8 0.066 1-1/2 031570.023 1/8 0.069 1-1/2 031580.024 1/8 0.072 1-1/2 031590.025 1/8 0.075 1-1/2 031600.026 1/8 0.078 1-1/2 031610.027 1/8 0.081 1-1/2 031620.028 1/8 0.084 1-1/2 031630.029 1/8 0.087 1-1/2 031640.030 1/8 0.090 1-1/2 031650.031 1/8 0.093 1-1/2 031660.032 1/8 0.096 1-1/2 031670.033 1/8 0.099 1-1/2 031680.034 1/8 0.102 1-1/2 031690.035 1/8 0.105 1-1/2 031700.036 1/8 0.108 1-1/2 031710.037 1/8 0.111 1-1/2 031720.038 1/8 0.114 1-1/2 031730.039 1/8 0.117 1-1/2 031740.040 1/8 0.120 1-1/2 031750.041 1/8 0.123 1-1/2 026060.042 1/8 0.126 1-1/2 026070.043 1/8 0.129 1-1/2 02608
continued on next page
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
44 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
M4B 3xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.044 1/8 0.132 1-1/2 026090.045 1/8 0.135 1-1/2 026100.046 1/8 0.138 1-1/2 026110.047 1/8 0.141 1-1/2 026120.048 1/8 0.144 1-1/2 026130.049 1/8 0.147 1-1/2 026140.050 1/8 0.150 1-1/2 026150.051 1/8 0.153 1-1/2 026160.052 1/8 0.156 1-1/2 026170.053 1/8 0.159 1-1/2 026180.054 1/8 0.162 1-1/2 026190.055 1/8 0.165 1-1/2 026200.056 1/8 0.168 1-1/2 026210.057 1/8 0.171 1-1/2 026220.058 1/8 0.174 1-1/2 026230.059 1/8 0.177 1-1/2 026240.060 1/8 0.180 1-1/2 026250.062 1/8 0.186 1-1/2 026260.065 1/8 0.195 1-1/2 026270.070 1/8 0.210 1-1/2 026280.078 1/8 0.234 1-1/2 026290.080 1/8 0.240 1-1/2 026300.085 1/8 0.255 1-1/2 026310.090 1/8 0.270 1-1/2 026320.093 1/8 0.279 1-1/2 026330.095 1/8 0.285 1-1/2 026340.100 1/8 0.300 1-1/2 026350.105 1/8 0.315 1-1/2 026360.110 1/8 0.330 1-1/2 026370.115 1/8 0.345 1-1/2 026380.120 1/8 0.360 1-1/2 02639
FRACTIONAL
M4B 3xD
POS
4
continued
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
45www.ksptmicrotools.comEND MILLS END MILLS
POS
4
FRACTIONAL
M4B 3xD, 8xD Overall Reach
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
M4B 3xD, 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.080 1-1/2 037510.015 1/8 0.045 0.120 1-1/2 037520.020 1/8 0.060 0.160 1-1/2 037530.025 1/8 0.075 0.200 1-1/2 037540.030 1/8 0.090 0.240 1-1/2 037550.031 1/8 0.093 0.248 1-1/2 037560.035 1/8 0.105 0.280 1-1/2 037570.040 1/8 0.120 0.320 1-1/2 037580.045 1/8 0.135 0.360 2 037590.047 1/8 0.141 0.376 2 037600.050 1/8 0.150 0.400 2 037610.055 1/8 0.165 0.440 2 037620.060 1/8 0.180 0.480 2 037630.062 1/8 0.186 0.496 2 037640.065 1/8 0.195 0.520 2 037650.070 1/8 0.210 0.560 2 037660.075 1/8 0.225 0.600 2 037670.078 1/8 0.234 0.624 2 037680.080 1/8 0.240 0.640 2 037690.085 1/8 0.255 0.680 2 037700.090 1/8 0.270 0.720 2 037710.093 1/8 0.279 0.744 2 037720.095 1/8 0.285 0.760 2 037730.100 1/8 0.300 0.800 2 037740.110 1/8 0.330 0.880 2 037750.115 1/8 0.345 0.920 2 037760.120 1/8 0.360 0.960 2 03777
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
New Expanded Tools
2D
30°1D
L3
L1
L2
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.0000/-0.0001D2 = h6
46 www.ksptmicrotools.comEND MILLS END MILLS
POS
4
M4B 3xD, 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
REACH L3
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.030 0.120 1-1/2 037780.015 1/8 0.045 0.180 1-1/2 037790.020 1/8 0.060 0.240 1-1/2 037800.025 1/8 0.075 0.300 1-1/2 037810.030 1/8 0.090 0.360 2 037820.031 1/8 0.093 0.372 2 037830.035 1/8 0.105 0.420 2 037840.040 1/8 0.120 0.480 2 037850.045 1/8 0.135 0.540 2 037860.047 1/8 0.141 0.564 2 037870.050 1/8 0.150 0.600 2 037880.055 1/8 0.165 0.660 2 037890.060 1/8 0.180 0.720 2 037900.062 1/8 0.186 0.744 2 037910.065 1/8 0.195 0.780 2 037920.070 1/8 0.210 0.840 2 037930.075 1/8 0.225 0.900 2 037940.078 1/8 0.234 0.936 2-1/2 037950.080 1/8 0.240 0.960 2-1/2 037960.085 1/8 0.255 1.020 2-1/2 037970.090 1/8 0.270 1.080 2-1/2 037980.093 1/8 0.279 1.116 2-1/2 037990.095 1/8 0.285 1.140 2-1/2 038000.100 1/8 0.300 1.200 2-1/2 038010.110 1/8 0.330 1.320 2-1/2 038020.115 1/8 0.345 1.380 2-1/2 038030.120 1/8 0.360 1.440 2-1/2 03804
FRACTIONAL
M4B 3xD, 12xD Overall Reach
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
New Expanded Tools
2D
30°1D
L3
L1
L2
15°
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
47www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
FRACTIONAL
M4LB 5xD
POS
4
M4LB 5xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.050 2-1/2 027200.015 1/8 0.075 2-1/2 027210.020 1/8 0.100 2-1/2 027220.025 1/8 0.125 2-1/2 027230.030 1/8 0.150 2-1/2 027240.031 1/8 0.155 2-1/2 027250.035 1/8 0.175 2-1/2 027260.040 1/8 0.200 2-1/2 027270.045 1/8 0.225 2-1/2 027280.047 1/8 0.235 2-1/2 027290.050 1/8 0.250 2-1/2 027300.055 1/8 0.275 2-1/2 027310.060 1/8 0.300 2-1/2 027320.062 1/8 0.310 2-1/2 027330.065 1/8 0.325 2-1/2 027340.070 1/8 0.350 2-1/2 027350.075 1/8 0.375 2-1/2 027360.078 1/8 0.390 2-1/2 027370.080 1/8 0.400 2-1/2 027380.085 1/8 0.425 2-1/2 027390.090 1/8 0.450 2-1/2 027400.093 1/8 0.465 2-1/2 027410.095 1/8 0.475 2-1/2 027420.100 1/8 0.500 2-1/2 027430.110 1/8 0.550 2-1/2 027440.115 1/8 0.575 2-1/2 027450.120 1/8 0.600 2-1/2 02746
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (inch)
.010–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
48 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
M4EB 8xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.010 1/8 0.080 2-1/2 027470.015 1/8 0.120 2-1/2 027480.020 1/8 0.160 2-1/2 027490.025 1/8 0.200 2-1/2 027500.030 1/8 0.240 2-1/2 027510.031 1/8 0.248 2-1/2 027520.035 1/8 0.280 2-1/2 027530.040 1/8 0.320 2-1/2 027540.045 1/8 0.360 2-1/2 027550.047 1/8 0.376 2-1/2 027560.050 1/8 0.400 2-1/2 027570.055 1/8 0.440 2-1/2 027580.060 1/8 0.480 2-1/2 027590.062 1/8 0.496 2-1/2 027600.065 1/8 0.520 2-1/2 027610.070 1/8 0.560 2-1/2 027620.075 1/8 0.600 2-1/2 027630.078 1/8 0.624 2-1/2 027640.080 1/8 0.640 2-1/2 027650.085 1/8 0.680 2-1/2 027660.090 1/8 0.720 2-1/2 027670.093 1/8 0.744 2-1/2 027680.095 1/8 0.760 2-1/2 027690.100 1/8 0.800 2-1/2 027700.110 1/8 0.880 2-1/2 027710.115 1/8 0.920 2-1/2 027720.120 1/8 0.960 2-1/2 02773
FRACTIONAL
M4EB 8xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
49www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
TOLERANCES (inch)
.015–.120 DIAMETER
D1 = +0.000/–0.001D2 = h6
FRACTIONAL
M4XB 12xD
POS
4
M4XB 12xDFRACTIONAL SERIES
inch EDP NO.
CUTTING DIAMETER
D1
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0.015 1/8 0.180 2-1/2 027740.020 1/8 0.240 2-1/2 027750.025 1/8 0.300 2-1/2 027760.030 1/8 0.360 2-1/2 027770.031 1/8 0.372 2-1/2 027780.035 1/8 0.420 2-1/2 027790.040 1/8 0.480 2-1/2 027800.045 1/8 0.540 2-1/2 027810.047 1/8 0.564 2-1/2 027820.050 1/8 0.600 2-1/2 027830.055 1/8 0.660 2-1/2 027840.060 1/8 0.720 2-1/2 027850.062 1/8 0.744 2-1/2 027860.065 1/8 0.780 2-1/2 027870.070 1/8 0.840 2-1/2 027880.075 1/8 0.900 2-1/2 027890.078 1/8 0.936 2-1/2 027900.080 1/8 0.960 2-1/2 027910.085 1/8 1.020 2-1/2 027920.090 1/8 1.080 2-1/2 027930.093 1/8 1.116 2-1/2 027940.095 1/8 1.140 2-1/2 027950.100 1/8 1.200 2-1/2 027960.110 1/8 1.320 2-1/2 027970.115 1/8 1.380 2-1/2 027980.120 1/8 1.440 2-1/2 02799
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
0,2–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
50 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
M2M 1.5xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0,2 0.0079 3,0 0,3 38,0 028010,3 0.0118 3,0 0,4 38,0 028020,4 0.0157 3,0 0,6 38,0 028030,5 0.0197 3,0 0,7 38,0 028040,6 0.0236 3,0 0,9 38,0 028050,7 0.0276 3,0 1,0 38,0 028060,8 0.0315 3,0 1,2 38,0 028070,9 0.0354 3,0 1,3 38,0 028081,0 0.0394 3,0 1,5 38,0 028091,0 0.0394 4,0 1,5 50,0 028191,1 0.0433 3,0 1,6 38,0 028601,1 0.0433 4,0 1,6 50,0 028921,2 0.0472 3,0 1,8 38,0 028611,2 0.0472 4,0 1,8 50,0 028931,3 0.0512 3,0 1,9 38,0 028621,3 0.0512 4,0 1,9 50,0 028941,4 0.0551 3,0 2,1 38,0 028631,4 0.0551 4,0 2,1 50,0 028951,5 0.0591 3,0 2,2 38,0 028641,5 0.0591 4,0 2,2 50,0 028961,6 0.0630 3,0 2,4 38,0 028651,6 0.0630 4,0 2,4 50,0 028971,7 0.0669 3,0 2,5 38,0 028661,7 0.0669 4,0 2,5 50,0 028981,8 0.0709 3,0 2,7 38,0 028671,8 0.0709 4,0 2,7 50,0 028991,9 0.0748 3,0 2,8 38,0 028681,9 0.0748 4,0 2,8 50,0 029002,0 0.0787 3,0 3,0 38,0 028692,0 0.0787 4,0 3,0 50,0 029012,5 0.0984 3,0 3,7 38,0 028702,5 0.0984 4,0 3,7 50,0 029023,0 0.1181 3,0 4,5 38,0 028713,0 0.1181 4,0 4,5 50,0 02903
METRIC
M2M 1.5xD
POS
2
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
0,2–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
51www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
METRIC
M2M 3xD
POS
2
M2M 3xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0,2 0.0079 3,0 0,6 38,0 028110,2 0.0079 4,0 0,6 50,0 023490,3 0.0118 3,0 0,9 38,0 023500,3 0.0118 4,0 0,9 50,0 023600,4 0.0157 3,0 1,2 38,0 023510,4 0.0157 4,0 1,2 50,0 023610,5 0.0197 3,0 1,5 38,0 023520,5 0.0197 4,0 1,5 50,0 023620,6 0.0236 3,0 1,8 38,0 023530,6 0.0236 4,0 1,8 50,0 023630,7 0.0276 3,0 2,1 38,0 023540,7 0.0276 4,0 2,1 50,0 023640,8 0.0315 3,0 2,4 38,0 023550,8 0.0315 4,0 2,4 50,0 023650,9 0.0354 3,0 2,7 38,0 023560,9 0.0354 4,0 2,7 50,0 023661,0 0.0394 3,0 3,0 38,0 023571,0 0.0394 4,0 3,0 50,0 023671,1 0.0433 3,0 3,3 38,0 028721,1 0.0433 4,0 3,3 50,0 029041,2 0.0472 3,0 3,6 38,0 028731,2 0.0472 4,0 3,6 50,0 029051,3 0.0512 3,0 3,9 38,0 028741,3 0.0512 4,0 3,9 50,0 029061,4 0.0551 3,0 4,2 38,0 028751,4 0.0551 4,0 4,2 50,0 029071,5 0.0591 3,0 4,5 38,0 028761,5 0.0591 4,0 4,5 50,0 029081,6 0.0630 3,0 4,8 38,0 028771,6 0.0630 4,0 4,8 50,0 029091,7 0.0669 3,0 5,1 38,0 028781,7 0.0669 4,0 5,1 50,0 029101,8 0.0709 3,0 5,4 38,0 028791,8 0.0709 4,0 5,4 50,0 029111,9 0.0748 3,0 5,7 38,0 028801,9 0.0748 4,0 5,7 50,0 029122,0 0.0787 3,0 6,0 38,0 028812,0 0.0787 4,0 6,0 50,0 029132,1 0.0827 3,0 6,3 38,0 028822,2 0.0866 3,0 6,6 38,0 028832,3 0.0906 3,0 6,9 38,0 028842,4 0.0945 3,0 7,2 38,0 028852,5 0.0984 3,0 7,5 38,0 028862,5 0.0984 4,0 7,5 50,0 029142,6 0.1024 3,0 7,8 38,0 028872,7 0.1063 3,0 8,1 38,0 028882,8 0.1102 3,0 8,4 38,0 028892,9 0.1142 3,0 8,7 38,0 028903,0 0.1181 3,0 9,0 38,0 028913,0 0.1181 4,0 9,0 50,0 02915
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
0,5–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
52 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
M2MB 1.5xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0,5 0.0197 3,0 0,7 38,0 031800,6 0.0236 3,0 0,9 38,0 031810,7 0.0276 3,0 1,0 38,0 031820,8 0.0315 3,0 1,2 38,0 031830,9 0.0354 3,0 1,3 38,0 031841,0 0.0394 3,0 1,5 38,0 031851,0 0.0394 4,0 1,5 50,0 028491,1 0.0433 3,0 1,6 38,0 029161,1 0.0433 4,0 1,6 50,0 029801,2 0.0472 3,0 1,8 38,0 029171,2 0.0472 4,0 1,8 50,0 029811,3 0.0512 3,0 1,9 38,0 029181,3 0.0512 4,0 1,9 50,0 029821,4 0.0551 3,0 2,1 38,0 029191,4 0.0551 4,0 2,1 50,0 029831,5 0.0591 3,0 2,2 38,0 029201,5 0.0591 4,0 2,2 50,0 029841,6 0.0630 3,0 2,4 38,0 029211,6 0.0630 4,0 2,4 50,0 029851,7 0.0669 3,0 2,5 38,0 029221,7 0.0669 4,0 2,5 50,0 029861,8 0.0709 3,0 2,7 38,0 029231,8 0.0709 4,0 2,7 50,0 029871,9 0.0748 3,0 2,8 38,0 029241,9 0.0748 4,0 2,8 50,0 029882,0 0.0787 3,0 3,0 38,0 029252,0 0.0787 4,0 3,0 50,0 029892,5 0.0984 3,0 3,7 38,0 029262,5 0.0984 4,0 3,7 50,0 029903,0 0.1181 3,0 4,5 38,0 029273,0 0.1181 4,0 4,5 50,0 02991
METRIC
M2MB 1.5xD
POS
2
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
0,5–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
53www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
METRIC
M2MB 3xD
POS
2
M2MB 3xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
0,5 0.0197 4,0 1,5 50,0 032000,6 0.0236 4,0 1,8 50,0 032010,7 0.0276 4,0 2,1 50,0 032020,8 0.0315 4,0 2,4 50,0 032030,9 0.0354 4,0 2,7 50,0 032041,0 0.0394 3,0 3,0 38,0 028291,0 0.0394 4,0 3,0 50,0 032051,1 0.0433 3,0 3,3 38,0 029401,1 0.0433 4,0 3,3 50,0 030041,2 0.0472 3,0 3,6 38,0 029411,2 0.0472 4,0 3,6 50,0 030051,3 0.0512 3,0 3,9 38,0 029421,3 0.0512 4,0 3,9 50,0 030061,4 0.0551 3,0 4,2 38,0 029431,4 0.0551 4,0 4,2 50,0 030071,5 0.0591 3,0 4,5 38,0 029441,5 0.0591 4,0 4,5 50,0 030081,6 0.0630 3,0 4,8 38,0 029451,6 0.0630 4,0 4,8 50,0 030091,7 0.0669 3,0 5,1 38,0 029461,7 0.0669 4,0 5,1 50,0 030101,8 0.0709 3,0 5,4 38,0 029471,8 0.0709 4,0 5,4 50,0 030111,9 0.0748 3,0 5,7 38,0 029481,9 0.0748 4,0 5,7 50,0 030122,0 0.0787 3,0 6,0 38,0 029492,0 0.0787 4,0 6,0 50,0 030132,1 0.0827 3,0 6,3 38,0 029502,2 0.0866 3,0 6,6 38,0 029512,3 0.0906 3,0 6,9 38,0 029522,4 0.0945 3,0 7,2 38,0 029532,5 0.0984 3,0 7,5 38,0 029542,5 0.0984 4,0 7,5 50,0 030142,6 0.1024 3,0 7,8 38,0 029552,7 0.1063 3,0 8,1 38,0 029562,8 0.1102 3,0 8,4 38,0 029572,9 0.1142 3,0 8,7 38,0 029583,0 0.1181 3,0 9,0 38,0 029593,0 0.1181 4,0 9,0 50,0 03015
• Two flute design is ideal for softer alloyed, non-ferrous material applications that require slotting or involve heavy chip loads.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
1,0–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
54 www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
M4MB 1.5xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
1,0 0.0394 3,0 1,5 38,0 031951,0 0.0394 4,0 1,5 50,0 028591,1 0.0433 3,0 1,6 38,0 029281,1 0.0433 4,0 1,6 50,0 029921,2 0.0472 3,0 1,8 38,0 029291,2 0.0472 4,0 1,8 50,0 029931,3 0.0512 3,0 1,9 38,0 029301,3 0.0512 4,0 1,9 50,0 029941,4 0.0551 3,0 2,1 38,0 029311,4 0.0551 4,0 2,1 50,0 029951,5 0.0591 3,0 2,2 38,0 029321,5 0.0591 4,0 2,2 50,0 029961,6 0.0630 3,0 2,4 38,0 029331,6 0.0630 4,0 2,4 50,0 029971,7 0.0669 3,0 2,5 38,0 029341,7 0.0669 4,0 2,5 50,0 029981,8 0.0709 3,0 2,7 38,0 029351,8 0.0709 4,0 2,7 50,0 029991,9 0.0748 3,0 2,8 38,0 029361,9 0.0748 4,0 2,8 50,0 030002,0 0.0787 3,0 3,0 38,0 029372,0 0.0787 4,0 3,0 50,0 030012,5 0.0984 3,0 3,7 38,0 029382,5 0.0984 4,0 3,7 50,0 030023,0 0.1181 3,0 4,5 38,0 029393,0 0.1181 4,0 4,5 50,0 03003
METRIC
M4MB 1.5xD
POS
4
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
STEELS
STAINLESS STEELS
CAST IRON
HIGH TEMP ALLOYS
TITANIUM
HARDENED STEELS
NON-FERROUS
PLASTICS/COMPOSITES
TOLERANCES (mm)
1,0–3,0 DIAMETER
D1 = +0.0000/–0.0254D2 = h6
55www.ksptmicrotools.com
2D
30°
L1L2
1D
12°
END MILLS END MILLS
METRIC
M4MB 3xD
POS
4
M4MB 3xDMETRIC SERIES
mm EDP NO.
CUTTING DIAMETER
D1
DECIMAL EQUIVALENT
SHANK DIAMETER
D2
LENGTH OF CUT
L2
OVERALL LENGTH
L1
TI-NAMITE-A (AlTiN)
1,0 0.0394 3,0 3,0 38,0 028391,0 0.0394 4,0 3,0 50,0 032151,1 0.0433 3,0 3,3 38,0 029601,1 0.0433 4,0 3,3 50,0 030161,2 0.0472 3,0 3,6 38,0 029611,2 0.0472 4,0 3,6 50,0 030171,3 0.0512 3,0 3,9 38,0 029621,3 0.0512 4,0 3,9 50,0 030181,4 0.0551 3,0 4,2 38,0 029631,4 0.0551 4,0 4,2 50,0 030191,5 0.0591 3,0 4,5 38,0 029641,5 0.0591 4,0 4,5 50,0 030201,6 0.0630 3,0 4,8 38,0 029651,6 0.0630 4,0 4,8 50,0 030211,7 0.0669 3,0 5,1 38,0 029661,7 0.0669 4,0 5,1 50,0 030221,8 0.0709 3,0 5,4 38,0 029671,8 0.0709 4,0 5,4 50,0 030231,9 0.0748 3,0 5,7 38,0 029681,9 0.0748 4,0 5,7 50,0 030242,0 0.0787 3,0 6,0 38,0 029692,0 0.0787 4,0 6,0 50,0 030252,1 0.0827 3,0 6,3 38,0 029702,2 0.0866 3,0 6,6 38,0 029712,3 0.0906 3,0 6,9 38,0 029722,4 0.0945 3,0 7,2 38,0 029732,5 0.0984 3,0 7,5 38,0 029742,5 0.0984 4,0 7,5 50,0 030262,6 0.1024 3,0 7,8 38,0 029752,7 0.1063 3,0 8,1 38,0 029762,8 0.1102 3,0 8,4 38,0 029772,9 0.1142 3,0 8,7 38,0 029783,0 0.1181 3,0 9,0 38,0 029793,0 0.1181 4,0 9,0 50,0 03027
• Four flute design allows for higher feed rates and decreased deflection, improving productivity and surface finish.
• Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds.
• High performance carbide substrate designed specifically for Micro Tool applications.
• Broad portfolio, offering consistent lengths of cut, to ensure application demands are met.
• Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality.
• All tools in stock to meet customer order requirements.
• All micro tools are manufactured in accordance with the KSPT ISO certified quality procedures.
56 www.ksptmicrotools.comEND MILLS END MILLS
INCH Baseline Speed and FeedSquare & Ball EndWith and Without Reach Hardness
Vc (sfm)
Diameter (D1)(inch)
0.0050 0.0156 0.0312 0.0625 0.0938 0.1200
P
CARBON STEELS1018, 1040, 1080, 1090, 10L50, 1140, 1212, 12L15, 1525, 1536
≤ 275 Bhnor
≤ 28 HRc
Profile 365 RPM 278860 89378 44689 22309 14865 11619
(292-438)Fz 0.000022 0.00007 0.00013 0.00027 0.00041 0.00052
Feed (ipm) 12.05 12.05 12.05 12.05 12.05 12.05
Slot 290 RPM 221560 71013 35506 17725 11810 9232
(232-348)Fz 0.000022 0.00007 0.00013 0.00027 0.00041 0.00052
Feed (ipm) 9.57 9.57 9.57 9.57 9.57 9.57
ALLOY STEELS4140, 4150, 4320, 5120,5150, 8630, 86L20, 50100
≤ 375 Bhnor
≤ 40 HRc
Profile 210 RPM 160440 51423 25712 12835 8552 6685
(168-252)Fz 0.000019 0.00006 0.00012 0.00024 0.00036 0.00046
Feed (ipm) 6.16 6.16 6.16 6.16 6.16 6.16
Slot 165 RPM 126060 40404 20202 10085 6720 5253
(132-198)Fz 0.000019 0.00006 0.00012 0.00024 0.00036 0.00046
Feed (ipm) 4.84 4.84 4.84 4.84 4.84 4.84
HTOOL STEELSA2, D2, H13, L2, M2,P20, S7, T15, W2
≤ 375 Bhnor
≤ 40 HRc
Profile 175 RPM 133700 42853 21426 10696 7127 5571
(140-210)Fz 0.000016 0.00005 0.00010 0.00020 0.00030 0.00038
Feed (ipm) 4.28 4.28 4.28 4.28 4.28 4.28
Slot 140 RPM 106960 34282 17141 8557 5701 4457
(112-168)Fz 0.000016 0.00005 0.00010 0.00020 0.00030 0.00038
Feed (ipm) 3.42 3.42 3.42 3.42 3.42 3.42
K
CAST IRONS(LOW & MEDIUM ALLOY)Gray, Malleable, Ductile
≤ 220 Bhnor
≤ 19 HRc
Profile 305 RPM 233020 74686 37343 18642 12421 9709
(244-366)Fz 0.000022 0.00007 0.00014 0.00027 0.00041 0.00052
Feed (ipm) 10.08 10.08 10.08 10.08 10.08 10.08
Slot 245 RPM 187180 59994 29997 14974 9978 7799
(196-294)Fz 0.000022 0.00007 0.00014 0.00027 0.00041 0.00052
Feed (ipm) 8.10 8.10 8.10 8.10 8.10 8.10
M
STAINLESS STEELS(FREE MACHINING)303, 416, 420F, 430F, 440F
≤ 275 Bhnor
≤ 28 HRc
Profile 340 RPM 259760 83256 41628 20781 13846 10823
(272-408)Fz 0.000022 0.00007 0.00013 0.00027 0.00041 0.00052
Feed (ipm) 11.22 11.22 11.22 11.22 11.22 11.22
Slot 270 RPM 206280 66115 33058 16502 10996 8595
(216-324)Fz 0.000022 0.00007 0.00013 0.00027 0.00041 0.00052
Feed (ipm) 8.91 8.91 8.91 8.91 8.91 8.91
STAINLESS STEELS(DIFFICULT)304, 304L, 316, 316L
≤ 275 Bhnor
≤ 28 HRc
Profile 235 RPM 179540 57545 28772 14363 9570 7481
(188-282)Fz 0.000019 0.00006 0.00012 0.00024 0.00036 0.00046
Feed (ipm) 6.90 6.90 6.90 6.90 6.90 6.90
Slot 185 RPM 141340 45301 22651 11307 7534 5889
(148-222)Fz 0.000019 0.00006 0.00012 0.00024 0.00036 0.00046
Feed (ipm) 5.43 5.43 5.43 5.43 5.43 5.43
STAINLESS STEELS(PH)13-8 PH, 15-5PH,17-4 PH, CUSTOM 450
≤ 325 Bhnor
≤ 35 HRc
Profile 215 RPM 164260 52647 26324 13141 8756 6844
(172-258)Fz 0.000014 0.00004 0.00008 0.00017 0.00025 0.00033
Feed (ipm) 4.46 4.46 4.46 4.46 4.46 4.46
Slot 170 RPM 129880 41628 20814 10390 6923 5412
(136-204)Fz 0.000014 0.00004 0.00008 0.00017 0.00025 0.00033
Feed (ipm) 3.53 3.53 3.53 3.53 3.53 3.53
continued on next page
FRACTIONAL
Baseline
57www.ksptmicrotools.comEND MILLS END MILLS
INCH Baseline Speed and FeedSquare & Ball EndWith and Without Reach Hardness
Vc (sfm)
Diameter (D1)(inch)
0.0050 0.0156 0.0312 0.0625 0.0938 0.1200
S
SUPER ALLOYS(NICKEL, COBALT, IRON BASE)Inconel 601, 617, 625,Incoloy, Monel 400
≤ 300 Bhnor
≤ 32 HRc
Profile 60 RPM 45840 14692 7346 3667 2443 1910
(48-72)Fz 0.000012 0.00004 0.00008 0.00015 0.00023 0.00029
Feed (ipm) 1.11 1.11 1.11 1.11 1.11 1.11
Slot 45 RPM 34380 11019 5510 2750 1833 1433
(36-54)Fz 0.000012 0.00004 0.00008 0.00015 0.00023 0.00029
Feed (ipm) 0.83 0.83 0.83 0.83 0.83 0.83
SUPER ALLOYS(NICKEL, COBALT, IRON BASE)Inconel 718, X-750, Incoloy, Waspaloy, Hastelloy, Rene
≤ 400 Bhnor
≤ 43 HRc
Profile 45 RPM 34380 11019 5510 2750 1833 1433
(36-54)Fz 0.000008 0.00003 0.00005 0.00010 0.00015 0.00019
Feed (ipm) 0.55 0.55 0.55 0.55 0.55 0.55
Slot 35 RPM 26740 8571 4285 2139 1425 1114
(28-42)Fz 0.000008 0.00003 0.00005 0.00010 0.00015 0.00019
Feed (ipm) 0.43 0.43 0.43 0.43 0.43 0.43
TITANIUM ALLOYSPure Titanium, Ti6Al4V,Ti6Al2Sn4Zr2Mo,Ti4Al4Mo2Sn0.5Si
≤ 350 Bhnor
≤ 38 HRc
Profile 160 RPM 122240 39179 19590 9779 6516 5093
(128-192)Fz 0.000014 0.00004 0.00008 0.00017 0.00025 0.00033
Feed (ipm) 3.32 3.32 3.32 3.32 3.32 3.32
Slot 130 RPM 99320 31833 15917 7946 5294 4138
(104-156)Fz 0.000014 0.00004 0.00008 0.00017 0.00025 0.00033
Feed (ipm) 2.70 2.70 2.70 2.70 2.70 2.70
TITANIUM ALLOYS(DIFFICULT)Ti10Al2Fe3Al, Ti5Al5V5Mo3Cr, Ti7Al4Mo, Ti3Al8V6Cr4Zr4Mo, Ti6Al6V6Sn, Ti15V3 Cr3Sn3Al
≤ 440 Bhnor
≤ 47 HRc
Profile 60 RPM 45840 14692 7346 3667 2443 1910
(48-72)Fz 0.000010 0.00003 0.00006 0.00012 0.00018 0.00023
Feed (ipm) 0.88 0.88 0.88 0.88 0.88 0.88
Slot 45 RPM 34380 11019 5510 2750 1833 1433
(36-54)Fz 0.000010 0.00003 0.00006 0.00012 0.00018 0.00023
Feed (ipm) 0.66 0.66 0.66 0.66 0.66 0.66
N
ALUMINUM ALLOYS2017, 2024, 356, 6061, 7075
≤ 150 Bhnor
≤ 7 HRc
Profile 1000 RPM 764000 244872 122436 61120 40725 31833
(800-1200)Fz 0.000064 0.00020 0.00040 0.00080 0.00120 0.00153
Feed (ipm) 97.50 97.50 97.50 97.50 97.50 97.50
Slot 800 RPM 611200 195897 97949 48896 32580 25467
(640-960)Fz 0.000064 0.00020 0.00040 0.00080 0.00120 0.00153
Feed (ipm) 78.00 78.00 78.00 78.00 78.00 78.00
COPPER ALLOYSAlum Bronze, C110, Muntz Brass
≤ 140 Bhnor
≤ 3 HRc
Profile 515 RPM 393460 126109 63054 31477 20973 16394
(412-618)Fz 0.000048 0.00015 0.00030 0.00060 0.00090 0.00115
Feed (ipm) 37.68 37.68 37.68 37.68 37.68 37.68
Slot 410 RPM 313240 100397 50199 25059 16697 13052
(328-492)Fz 0.000048 0.00015 0.00030 0.00060 0.00090 0.00115
Feed (ipm) 30.00 30.00 30.00 30.00 30.00 30.00
PLASTICSPolycarbonate, PVC, Polypropylene
Profile 1000 RPM 764000 244872 122436 61120 40725 31833
(800-1200)Fz 0.000064 0.00020 0.00040 0.00080 0.00120 0.00153
Feed (ipm) 97.50 97.50 97.50 97.50 97.50 97.50
Slot 800 RPM 611200 195897 97949 48896 32580 25467
(640-960)Fz 0.000064 0.00020 0.00040 0.00080 0.00120 0.00153
Feed (ipm) 78.00 78.00 78.00 78.00 78.00 78.00
Note: • Bhn (Brinell) HRc (Rockwell C)• when recommended speed exceeds your capability, use maximum available and recalculate ipm• rpm = Vc x 3.82 / D1• ipm = Fz x No. of flutes x rpm• reduce speed and feed for materials harder than listed• reduce feed and Ae when finish milling (.02 x D1 maximum)• refer to the KYOCERA SGS Tool Wizard® or ksptmicrotools.com for detailed technical charts by series
FRACTIONAL
Baseline
58 www.ksptmicrotools.comEND MILLS END MILLS
METRIC
BaselineMETRIC Baseline Speed and FeedSquare & Ball EndWith and Without Reach Hardness
Vc (m/min)
Diameter (D1)(mm)
0.1 0.5 1 1.5 2 2.5 3
P
CARBON STEELS1018, 1040, 1080, 1090, 10L50, 1140, 1212, 12L15, 1525, 1536
≤ 275 Bhnor
≤ 28 HRc
Profile 111 RPM 353837 70767 35384 23589 17692 14153 11795
(89-134)Fz 0.00043 0.00216 0.00432 0.00648 0.00865 0.01081 0.01297
Feed (mm/min) 306 306 306 306 306 306 306
Slot 88 RPM 281131 56226 28113 18742 14057 11245 9371
(71-106)Fz 0.00043 0.00216 0.00432 0.00648 0.00865 0.01081 0.01297
Feed (mm/min) 243 243 243 243 243 243 243
ALLOY STEELS4140, 4150, 4320, 5120,5150, 8630, 86L20, 50100
≤ 375 Bhnor
≤ 40 HRc
Profile 64 RPM 203577 40715 20358 13572 10179 8143 6786
(51-77)Fz 0.00038 0.00192 0.00384 0.00576 0.00769 0.00961 0.01153
Feed (mm/min) 156 156 156 156 156 156 156
Slot 50 RPM 159954 31991 15995 10664 7998 6398 5332
(40-60)Fz 0.00038 0.00192 0.00384 0.00576 0.00769 0.00961 0.01153
Feed (mm/min) 123 123 123 123 123 123 123
HTOOL STEELSA2, D2, H13, L2, M2,P20, S7, T15, W2
≤ 375 Bhnor
≤ 40 HRc
Profile 53 RPM 169648 33930 16965 11310 8482 6786 5655
(43-64)Fz 0.00032 0.00160 0.00320 0.00480 0.00640 0.00800 0.00962
Feed (mm/min) 109 109 109 109 109 109 109
Slot 43 RPM 135718 27144 13572 9048 6786 5429 4524
(34-51)Fz 0.00032 0.00160 0.00320 0.00480 0.00640 0.00800 0.00962
Feed (mm/min) 87 87 87 87 87 87 87
K
CAST IRONS(LOW & MEDIUM ALLOY)Gray, Malleable, Ductile
≤ 220 Bhnor
≤ 19 HRc
Profile 93 RPM 295672 59134 29567 19711 14784 11827 9856
(74-112)Fz 0.00043 0.00217 0.00433 0.00650 0.00866 0.01083 0.01301
Feed (mm/min) 256 256 256 256 256 256 256
Slot 75 RPM 237507 47501 23751 15834 11875 9500 7917
(60-90)Fz 0.00043 0.00217 0.00433 0.00650 0.00866 0.01083 0.01301
Feed (mm/min) 206 206 206 206 206 206 206
M
STAINLESS STEELS(FREE MACHINING)303, 416, 420F, 430F, 440F
≤ 275 Bhnor
≤ 28 HRc
Profile 104 RPM 329602 65920 32960 21973 16480 13184 10987
(83-124)Fz 0.00043 0.00216 0.00432 0.00648 0.00865 0.01081 0.01295
Feed (mm/min) 285 285 285 285 285 285 285
Slot 82 RPM 261742 52348 26174 17449 13087 10470 8725
(66-99)Fz 0.00043 0.00216 0.00432 0.00648 0.00865 0.01081 0.01295
Feed (mm/min) 226 226 226 226 226 226 226
STAINLESS STEELS(DIFFICULT)304, 304L, 316, 316L
≤ 275 Bhnor
≤ 28 HRc
Profile 72 RPM 227813 45563 22781 15188 11391 9113 7594
(57-86)Fz 0.00038 0.00192 0.00385 0.00577 0.00769 0.00961 0.01154
Feed (mm/min) 175 175 175 175 175 175 175
Slot 56 RPM 179342 35868 17934 11956 8967 7174 5978
(45-68)Fz 0.00038 0.00192 0.00385 0.00577 0.00769 0.00961 0.01154
Feed (mm/min) 138 138 138 138 138 138 138
STAINLESS STEELS(PH)13-8 PH, 15-5PH,17-4 PH, CUSTOM 450
≤ 325 Bhnor
≤ 35 HRc
Profile 66 RPM 208425 41685 20842 13895 10421 8337 6947
(52-79)Fz 0.00027 0.00136 0.00272 0.00408 0.00544 0.00680 0.00819
Feed (mm/min) 113 113 113 113 113 113 113
Slot 52 RPM 164801 32960 16480 10987 8240 6592 5493
(41-62)Fz 0.00027 0.00136 0.00272 0.00408 0.00544 0.00680 0.00819
Feed (mm/min) 90 90 90 90 90 90 90
continued on next page
59www.ksptmicrotools.comEND MILLS END MILLS
METRIC
BaselineMETRIC Baseline Speed and FeedSquare & Ball EndWith and Without Reach Hardness
Vc (m/min)
Diameter (D1)(mm)
0.1 0.5 1 1.5 2 2.5 3
S
SUPER ALLOYS(NICKEL, COBALT, IRON BASE)Inconel 601, 617, 625,Incoloy, Monel 400
≤ 300 Bhnor
≤ 32 HRc
Profile 18 RPM 58165 11633 5816 3878 2908 2327 1939
(15-22)Fz 0.00024 0.00121 0.00242 0.00362 0.00483 0.00604 0.00722
Feed (mm/min) 28 28 28 28 28 28 28
Slot 14 RPM 43624 8725 4362 2908 2181 1745 1454
(11-16)Fz 0.00024 0.00121 0.00242 0.00362 0.00483 0.00604 0.00722
Feed (mm/min) 21 21 21 21 21 21 21
SUPER ALLOYS(NICKEL, COBALT, IRON BASE)Inconel 718, X-750, Incoloy, Waspaloy, Hastelloy, Rene
≤ 400 Bhnor
≤ 43 HRc
Profile 14 RPM 43624 8725 4362 2908 2181 1745 1454
(11-16)Fz 0.00016 0.00080 0.00161 0.00241 0.00322 0.00402 0.00486
Feed (mm/min) 14 14 14 14 14 14 14
Slot 11 RPM 33930 6786 3393 2262 1696 1357 1131
(9-13)Fz 0.00016 0.00080 0.00161 0.00241 0.00322 0.00402 0.00486
Feed (mm/min) 11 11 11 11 11 11 11
TITANIUM ALLOYSPure Titanium, Ti6Al4V,Ti6Al2Sn4Zr2Mo,Ti4Al4Mo2Sn0.5Si
≤ 350 Bhnor
≤ 38 HRc
Profile 49 RPM 155107 31021 15511 10340 7755 6204 5170
(39-59)Fz 0.00027 0.00136 0.00272 0.00408 0.00544 0.00680 0.00821
Feed (mm/min) 84 84 84 84 84 84 84
Slot 40 RPM 126024 25205 12602 8402 6301 5041 4201
(32-48)Fz 0.00027 0.00136 0.00272 0.00408 0.00544 0.00680 0.00821
Feed (mm/min) 69 69 69 69 69 69 69
TITANIUM ALLOYS(DIFFICULT)Ti10Al2Fe3Al, Ti5Al5V5Mo3Cr, Ti7Al4Mo, Ti3Al8V6Cr4Zr4Mo, Ti6Al6V6Sn, Ti15V3 Cr3Sn3Al
≤ 440 Bhnor
≤ 47 HRc
Profile 18 RPM 58165 11633 5816 3878 2908 2327 1939
(15-22)Fz 0.00019 0.00096 0.00192 0.00288 0.00384 0.00480 0.00585
Feed (mm/min) 22 22 22 22 22 22 22
Slot 14 RPM 43624 8725 4362 2908 2181 1745 1454
(11-16)Fz 0.00019 0.00096 0.00192 0.00288 0.00384 0.00480 0.00585
Feed (mm/min) 17 17 17 17 17 17 17
N
ALUMINUM ALLOYS2017, 2024, 356, 6061, 7075
≤ 150 Bhnor
≤ 7 HRc
Profile 305 RPM 969416 193883 96942 64628 48471 38777 32314
(244-366)Fz 0.00128 0.00639 0.01277 0.01916 0.02555 0.03193 0.03832
Feed (mm/min) 2477 2477 2477 2477 2477 2477 2477
Slot 244 RPM 775533 155107 77553 51702 38777 31021 25851
(195-293)Fz 0.00128 0.00639 0.01277 0.01916 0.02555 0.03193 0.03832
Feed (mm/min) 1981 1981 1981 1981 1981 1981 1981
COPPER ALLOYSAlum Bronze, C110, Muntz Brass
≤ 140 Bhnor
≤ 3 HRc
Profile 157 RPM 499249 99850 49925 33283 24962 19970 16642
(126-188)Fz 0.00096 0.00479 0.00959 0.01438 0.01917 0.02396 0.02876
Feed (mm/min) 957 957 957 957 957 957 957
Slot 125 RPM 397461 79492 39746 26497 19873 15898 13249
(100-150)Fz 0.00096 0.00479 0.00959 0.01438 0.01917 0.02396 0.02876
Feed (mm/min) 762 762 762 762 762 762 762
PLASTICSPolycarbonate, PVC, Polypropylene
Profile 305 RPM 969416 193883 96942 64628 48471 38777 32314
(244-366)Fz 0.00128 0.00639 0.01277 0.01916 0.02555 0.03193 0.03832
Feed (mm/min) 2477 2477 2477 2477 2477 2477 2477
Slot 244 RPM 775533 155107 77553 51702 38777 31021 25851
(195-293)Fz 0.00128 0.00639 0.01277 0.01916 0.02555 0.03193 0.03832
Feed (mm/min) 1981 1981 1981 1981 1981 1981 1981
Note: • Bhn (Brinell) HRc (Rockwell C)• when recommended speed exceeds your capability, use maximum available and recalculate mm/min• rpm = (Vc x 1000) / (D1 x 3.14)• mm/min = Fz x No. of flutes x rpm• reduce speed and feed for materials harder than listed• reduce feed and Ae when finish milling (.02 x D1 maximum)• refer to the KYOCERA SGS Tool Wizard® or ksptmicrotools.com for detailed technical charts by series
60 www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL & METRIC
Speeds and Feeds
INCH2-Flute Square & BallWithout Reach
Flute Length 1.5 x D1 3 x D1
Feed Multiplier 1 0.9
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.30 ≤.50 ≤1 ≤.10 ≤.25 ≤2H
K
M
Slot 1 ≤.20 ≤.50 1 ≤.15 ≤.35S
N
METRIC2-Flute Square & BallWithout Reach
Flute Length 1.5 x D1 3 x D1
Feed Multiplier 1 0.9
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.30 ≤.50 ≤1 ≤.10 ≤.25 ≤2H
K
M
Slot 1 ≤.20 ≤.50 1 ≤.15 ≤.35S
N
METRIC4-Flute Square & BallWithout Reach
Flute Length 1.5 x D1 3 x D1
Feed Multiplier 1.57 1.41
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.30 ≤.50 ≤1 ≤.10 ≤.25 ≤2H
K
M
Slot 1 ≤.20 ≤.50 1 ≤.15 ≤.35S
N
INCH4-Flute Square & BallWithout Reach
Flute Length 1.5 x D1 3 x D1 5 x D1 8 x D1 12 x D1
Feed Multiplier 1.57 1.41 0.59 0.59 0.36
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.30 ≤.50 ≤1 ≤.10 ≤.25 ≤2 ≤.10 ≤.25 ≤3 ≤.05 ≤.10 ≤4 ≤.03 ≤.06 ≤6H
K
M
Slot 1 ≤.20 ≤.50 1 ≤.15 ≤.35 1 ≤.10 ≤.20S
N
Instructions: • rpm = use speed from INCH or METRIC Baseline chart• ipm = INCH Baseline Feed (ipm) x Feed Multiplier [from selected chart below]• mm/min = METRIC Baseline Feed (mm/min) x Feed Multiplier [from selected chart below]• Find Width of Cut (Ae) and Depth of Cut (Ap) recommendations on chart below • refer to the KYOCERA SGS Tool Wizard® or ksptmicrotools.com for detailed technical charts by series
Ap
Ae Ae
61www.ksptmicrotools.comEND MILLS END MILLS
FRACTIONAL & METRIC
Speeds and Feeds
INCH2-Flute Square & BallWith Reach
Flute Length 8 x D1 12 x D1
Feed Multiplier 0.6 0.5
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.25 ≤.50 ≤.30 ≤.22 ≤.45 ≤.25H
K
M
Slot 1 ≤.07 ≤.17 1 ≤.06 ≤.15S
N
INCH4-Flute Square & BallWith Reach
Flute Length 8 x D1 12 x D1
Feed Multiplier 0.95 0.75
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.25 ≤.50 ≤.30 ≤.22 ≤.45 ≤.25H
K
M
Slot 1 ≤.07 ≤.17 1 ≤.06 ≤.15S
N
INCH3-Flute Square & BallWith Reach
Flute Length 3 x D1 5 x D1 8 x D1 12 x D1 15 x D1 20 x D1 25 x D1
Feed Multiplier 1.57 1.41 0.59 0.59 0.36 0.45 0.35
Width/Depth Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1 Ae x D1 Ap x D1
Diameter ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312 ≤0.0312 >0.0312
P
ALL
Profile ≤.30 ≤.60 ≤.5 ≤.30 ≤.60 ≤.35 ≤.25 ≤.50 ≤.30 ≤.22 ≤.45 ≤.25 ≤.15 ≤.30 ≤.25 ≤.12 ≤.25 ≤.20 ≤.12 ≤.25 ≤.20H
K
M
Slot 1 ≤.15 ≤.30 1 ≤.08 ≤.20 1 ≤.07 ≤.17 1 ≤.06 ≤.15 1 ≤.06 ≤.15 1 ≤.04 ≤.10 1 ≤.04 ≤.10S
N
Note: • Bhn (Brinell) HRc (Rockwell C)• when recommended speed exceeds your capability, use maximum available and recalculate feed• reduce speed and feed for materials harder than listed• reduce feed and Ae when finish milling (.02 x D1 maximum)• refer to the KYOCERA SGS Tool Wizard® or ksptmicrotools.com for detailed technical charts by series
Instructions: • rpm = use speed from INCH or METRIC Baseline chart• ipm = INCH Baseline Feed (ipm) x Feed Multiplier [from selected chart below]• mm/min = METRIC Baseline Feed (mm/min) x Feed Multiplier [from selected chart below]• Find Width of Cut (Ae) and Depth of Cut (Ap) recommendations on chart below • refer to the KYOCERA SGS Tool Wizard® or ksptmicrotools.com for detailed technical charts by series
Ap
Ae Ae
62 www.ksptmicrotools.com
02201....................602202....................602203....................602204....................602205....................602206....................602207....................602208....................602209....................602210....................602211....................602212....................602213....................602214....................602215....................602216....................602217....................602218....................602219....................602220....................602221....................602222....................602223....................602224....................602225....................602226....................602227....................602228....................602229....................602230....................602231....................602232....................602233....................602234....................602235....................602236....................602238..................3202239..................3202240..................3202241..................3202242..................3202243..................3202244..................3202245..................3202246..................3202247..................3202248..................3202249..................3202250..................3202251..................3202252..................3202253..................3202254..................3202255..................3202256..................32
02257..................3202258..................3202259..................3202260..................3202261..................3202262..................3202263..................3202264..................3202265..................3202266..................3202267..................3202268..................3202269..................3202270..................3202271..................3202272..................3202273..................3202275....................802276....................802277....................802278....................802279....................802280....................802281....................802282....................802283....................802284....................802285....................802286....................802287....................802288....................802289....................802290....................802291....................802292....................802293....................802294....................802295....................802296....................802297....................802298....................802299....................802300....................802301....................802302....................802303....................802304....................802305....................802306....................802307....................802308....................802309....................802310....................802312..................3402313..................34
02314..................3402315..................3402316..................3402317..................3402318..................3402319..................3402320..................3402321..................3402322..................3402323..................3402324..................3402325..................3402326..................3402327..................3402328..................3402329..................3402330..................3402331..................3402332..................3402333..................3402334..................3402335..................3402336..................3402337..................3402338..................3402339..................3402340..................3402341..................3402342..................3402343..................3402344..................3402345..................3402346..................3402347..................3402349..................5102350..................5102351..................5102352..................5102353..................5102354..................5102355..................5102356..................5102357..................5102360..................5102361..................5102362..................5102363..................5102364..................5102365..................5102366..................5102367..................5102368....................702369....................702370....................702371....................7
02372....................702373....................702374....................702375....................702376....................702377....................702378....................702379....................702380....................702381....................702382....................702383....................702384....................702385....................702386....................702387....................702388....................702389....................702390....................702391....................702392....................702393....................702394....................702395....................702396....................702397....................702398....................702399....................702400....................702401....................702402..................3302403..................3302404..................3302405..................3302406..................3302407..................3302408..................3302409..................3302410..................3302411..................3302412..................3302413..................3302414..................3302415..................3302416..................3302417..................3302418..................3302419..................3302420..................3302421..................3302422..................3302423..................3302424..................3302425..................3302426..................33
02427..................3302428..................3302429..................3302430..................3302431..................3302432..................3302433..................3302434..................3302435..................3302436....................902437....................902438....................902439....................902440....................902441....................902442....................902443....................902444....................902445....................902446....................902447....................902448....................902449....................902450....................902451....................902452....................902453....................902454....................902455....................902456....................902457....................902458....................902459....................902460....................902461....................902462....................902463....................902464....................902465....................902466....................902467....................902468....................902469....................902470..................3502471..................3502472..................3502473..................3502474..................3502475..................3502476..................3502477..................3502478..................3502479..................3502480..................3502481..................35
02482..................3502483..................3502484..................3502485..................3502486..................3502487..................3502488..................3502489..................3502490..................3502491..................3502492..................3502493..................3502494..................3502495..................3502496..................3502497..................3502498..................3502499..................3502500..................3502501..................3502502..................3502503..................3502504..................1302505..................1302506..................1302507..................1302508..................1302509..................1302510..................1302511..................1302512..................1302513..................1302514..................1302515..................1302516..................1302517..................1302518..................1302519..................1302520..................1302521..................1302522..................1302523..................1302524..................1302525..................1302526..................1302527..................1302528..................1302529..................1302530..................1302531..................1302532..................1302533..................1302534..................1302535..................1302536..................13
02537..................1302538..................4102539..................4102540..................4202541..................4202542..................4202543..................4202544..................4202545..................4202546..................4202547..................4202548..................4202549..................4202550..................4202551..................4202552..................4202553..................4202554..................4202555..................4202556..................4202557..................4202558..................4202559..................4202560..................4202561..................4202562..................4202563..................4202564..................4202565..................4202566..................4202567..................4202568..................4202569..................4202570..................4202571..................4202572..................1502573..................1502574..................1502575..................1502576..................1502577..................1502578..................1502579..................1502580..................1502581..................1502582..................1502583..................1502584..................1502585..................1502586..................1502587..................1502588..................1502589..................1502590..................1502591..................15
EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE
EDP Number Index
63www.ksptmicrotools.com
02592..................1502593..................1502594..................1502595..................1502596..................1502597..................1502598..................1502599..................1502600..................1502601..................1502602..................1502603..................1502604..................1502605..................1502606..................4302607..................4302608..................4302609..................4402610..................4402611..................4402612..................4402613..................4402614..................4402615..................4402616..................4402617..................4402618..................4402619..................4402620..................4402621..................4402622..................4402623..................4402624..................4402625..................4402626..................4402627..................4402628..................4402629..................4402630..................4402631..................4402632..................4402633..................4402634..................4402635..................4402636..................4402637..................4402638..................4402639..................4402640..................3802641..................3802642..................3802643..................3802644..................3802645..................3802646..................38
02647..................3802648..................3802649..................3802650..................3802651..................3802652..................3802653..................3802654..................3802655..................3802656..................3802657..................3802658..................3802659..................3802660..................3802661..................3802662..................3802663..................3802664..................3802665..................3802666..................3802667..................3902668..................3902669..................3902670..................3902671..................3902672..................3902673..................3902674..................3902675..................3902676..................3902677..................3902678..................3902679..................3902680..................3902681..................3902682..................3902683..................3902684..................3902685..................3902686..................3902687..................3902688..................3902689..................3902690..................3902691..................3902692..................3902693..................3902694..................4002695..................4002696..................4002697..................4002698..................4002699..................4002700..................4002701..................40
02702..................4002703..................4002704..................4002705..................4002706..................4002707..................4002708..................4002709..................4002710..................4002711..................4002712..................4002713..................4002714..................4002715..................4002716..................4002717..................4002718..................4002719..................4002720..................4702721..................4702722..................4702723..................4702724..................4702725..................4702726..................4702727..................4702728..................4702729..................4702730..................4702731..................4702732..................4702733..................4702734..................4702735..................4702736..................4702737..................4702738..................4702739..................4702740..................4702741..................4702742..................4702743..................4702744..................4702745..................4702746..................4702747..................4802748..................4802749..................4802750..................4802751..................4802752..................4802753..................4802754..................4802755..................4802756..................48
02757..................4802758..................4802759..................4802760..................4802761..................4802762..................4802763..................4802764..................4802765..................4802766..................4802767..................4802768..................4802769..................4802770..................4802771..................4802772..................4802773..................4802774..................4902775..................4902776..................4902777..................4902778..................4902779..................4902780..................4902781..................4902782..................4902783..................4902784..................4902785..................4902786..................4902787..................4902788..................4902789..................4902790..................4902791..................4902792..................4902793..................4902794..................4902795..................4902796..................4902797..................4902798..................4902799..................4902801..................5002802..................5002803..................5002804..................5002805..................5002806..................5002807..................5002808..................5002809..................5002811..................5102819..................5002829..................53
02839..................5502849..................5202859..................5402860..................5002861..................5002862..................5002863..................5002864..................5002865..................5002866..................5002867..................5002868..................5002869..................5002870..................5002871..................5002872..................5102873..................5102874..................5102875..................5102876..................5102877..................5102878..................5102879..................5102880..................5102881..................5102882..................5102883..................5102884..................5102885..................5102886..................5102887..................5102888..................5102889..................5102890..................5102891..................5102892..................5002893..................5002894..................5002895..................5002896..................5002897..................5002898..................5002899..................5002900..................5002901..................5002902..................5002903..................5002904..................5102905..................5102906..................5102907..................5102908..................5102909..................5102910..................5102911..................51
02912..................5102913..................5102914..................5102915..................5102916..................5202917..................5202918..................5202919..................5202920..................5202921..................5202922..................5202923..................5202924..................5202925..................5202926..................5202927..................5202928..................5402929..................5402930..................5402931..................5402932..................5402933..................5402934..................5402935..................5402936..................5402937..................5402938..................5402939..................5402940..................5302941..................5302942..................5302943..................5302944..................5302945..................5302946..................5302947..................5302948..................5302949..................5302950..................5302951..................5302952..................5302953..................5302954..................5302955..................5302956..................5302957..................5302958..................5302959..................5302960..................5502961..................5502962..................5502963..................5502964..................5502965..................5502966..................55
02967..................5502968..................5502969..................5502970..................5502971..................5502972..................5502973..................5502974..................5502975..................5502976..................5502977..................5502978..................5502979..................5502980..................5202981..................5202982..................5202983..................5202984..................5202985..................5202986..................5202987..................5202988..................5202989..................5202990..................5202991..................5202992..................5402993..................5402994..................5402995..................5402996..................5402997..................5402998..................5402999..................5403000..................5403001..................5403002..................5403003..................5403004..................5303005..................5303006..................5303007..................5303008..................5303009..................5303010..................5303011..................5303012..................5303013..................5303014..................5303015..................5303016..................5503017..................5503018..................5503019..................5503020..................5503021..................55
EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE
EDP Number Index
64 www.ksptmicrotools.com
03022..................5503023..................5503024..................5503025..................5503026..................5503027..................5503029..................1203030..................1203031..................1203032..................1203033..................1203034..................1203035..................1203036..................1203037..................1203038..................1203039..................1203040..................1203041..................1203042..................1203043..................1203044..................1203045..................1203046..................1203047..................1203048..................1203049..................1203050..................1203051..................1203052..................1203053..................1203054..................1203055..................1203056..................1203057..................1203058..................1203059..................1203060..................1203061..................1203062..................1203063..................1203064..................1203071..................4103072..................4103073..................4103074..................4103075..................4103076..................4103077..................4103078..................4103079..................4103080..................4103081..................4103082..................41
03083..................4103084..................4103085..................4103086..................4103087..................4103088..................4103089..................4103090..................4103091..................4103092..................4103093..................4103094..................4103095..................4103096..................4103097..................4103098..................4103099..................4103100..................4103101..................4103103..................1403104..................1403105..................1403106..................1403107..................1403108..................1403109..................1403110 .................1403111..................1403112..................1403113..................1403114..................1403115..................1403116..................1403117..................1403118..................1403119..................1403120..................1403121..................1403122..................1403123..................1403124..................1403125..................1403126..................1403127..................1403128..................1403129..................1403130..................1403131..................1403132..................1403133..................1403134..................1403135..................1403136..................1403137..................14
03138..................1403145..................4303146..................4303147..................4303148..................4303149..................4303150..................4303151..................4303152..................4303153..................4303154..................4303155..................4303156..................4303157..................4303158..................4303159..................4303160..................4303161..................4303162..................4303163..................4303164..................4303165..................4303166..................4303167..................4303168..................4303169..................4303170..................4303171..................4303172..................4303173..................4303174..................4303175..................4303180..................5203181..................5203182..................5203183..................5203184..................5203185..................5203195..................5403200..................5303201..................5303202..................5303203..................5303204..................5303205..................5303215..................5503400..................1003401..................1003402..................1003403..................1003404..................1003405..................1003406..................1003407..................10
03408..................1003409..................1003410..................1003411..................1003412..................1003413..................1003414..................1003415..................1003416..................1003417..................1003418..................1003419..................1003420..................1003421..................1003422..................1003423..................1003424..................1003425..................1003426..................1003427..................1103428..................1103429..................1103430..................1103431..................1103432..................1103433..................1103434..................1103435..................1103436..................1103437..................1103438..................1103439..................1103440..................1103441..................1103442..................1103443..................1103444..................1103445..................1103446..................1103447..................1103448..................1103449..................1103450..................1103451..................1103452..................1103453..................1103454..................3603455..................3603456..................3603457..................3603458..................3603459..................3603460..................3603461..................36
03462..................3603463..................3603464..................3603465..................3603466..................3603467..................3603468..................3603469..................3603470..................3603471..................3603472..................3603473..................3603474..................3603475..................3603476..................3603477..................3603478..................3603479..................3603480..................3603481..................3703482..................3703483..................3703484..................3703485..................3703486..................3703487..................3703488..................3703489..................3703490..................3703491..................3703492..................3703493..................3703494..................3703495..................3703496..................3703497..................3703498..................3703499..................3703500..................3703501..................3703502..................3703503..................3703504..................3703505..................3703506..................3703507..................3703508..................1803509..................1803510..................1803511..................1803512..................1803513..................1803514..................1803515..................18
03516..................1803517..................1803518..................1803519..................1803520..................1803521..................1803522..................1803523..................1803524..................1803525..................1803526..................1803527..................1803528..................1803529..................1803530..................1803531..................1803532..................1803533..................1803534..................1803535..................1903536..................1903537..................1903538..................1903539..................1903540..................1903541..................1903542..................1903543..................1903544..................1903545..................1903546..................1903547..................1903548..................1903549..................1903550..................1903551..................1903552..................1903553..................1903554..................1903555..................1903556..................1903557..................1903558..................1903559..................1903560..................1903561..................1903562..................2003563..................2003564..................2003565..................2003566..................2003567..................2003568..................2003569..................20
03570..................2003571..................2003572..................2003573..................2003574..................2003575..................2003576..................2003577..................2003578..................2003579..................2003580..................2003581..................2003582..................2003583..................2003584..................2003585..................2003586..................2003587..................2003588..................2003589..................2103590..................2103591..................2103592..................2103593..................2103594..................2103595..................2103596..................2103597..................2103598..................2103599..................2103600..................2103601..................2103602..................2103603..................2103604..................2103605..................2103606..................2103607..................2103608..................2103609..................2103610..................2103611..................2103612..................2103613..................2103614..................2103615..................2103616..................2203617..................2203618..................2203619..................2203620..................2203621..................2203622..................2203623..................22
EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE
EDP Number Index
65www.ksptmicrotools.com
EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE EDP NO. PAGE
EDP Number Index
03624..................2203625..................2203626..................2203627..................2203628..................2203629..................2203630..................2203631..................2203632..................2203633..................2203634..................2203635..................2203636..................2203637..................2203638..................2203639..................2203640..................2203641..................2203642..................2203643..................2303644..................2303645..................2303646..................2303647..................2303648..................2303649..................2303650..................2303651..................2303652..................2303653..................2303654..................2303655..................2303656..................2303657..................2303658..................2303659..................2303660..................2303661..................2303662..................2303663..................2303664..................2303665..................2303666..................2303667..................2303668..................2303669..................2303670..................2403671..................2403672..................2403673..................2403674..................2403675..................2403676..................24
03677..................2403678..................2403679..................2403680..................2403681..................2403682..................2403683..................2403684..................2403685..................2403686..................2403687..................2403688..................2403689..................2403690..................2403691..................2403692..................2403693..................2403694..................2403695..................2403696..................2403697..................1603698..................1603699..................1603700..................1603701..................1603702..................1603703..................1603704..................1603705..................1603706..................1603707..................1603708..................1603709..................1603710..................1603711..................1603712..................1603713..................1603714..................1603715..................1603716..................1603717..................1603718..................1603719..................1603720..................1603721..................1603722..................1603723..................1603724..................1703725..................1703726..................1703727..................1703728..................1703729..................17
03730..................1703731..................1703732..................1703733..................1703734..................1703735..................1703736..................1703737..................1703738..................1703739..................1703740..................1703741..................1703742..................1703743..................1703744..................1703745..................1703746..................1703747..................1703748..................1703749..................1703750..................1703751..................4503752..................4503753..................4503754..................4503755..................4503756..................4503757..................4503758..................4503759..................4503760..................4503761..................4503762..................4503763..................4503764..................4503765..................4503766..................4503767..................4503768..................4503769..................4503770..................4503771..................4503772..................4503773..................4503774..................4503775..................4503776..................4503777..................4503778..................4603779..................4603780..................4603781..................4603782..................46
03783..................4603784..................4603785..................4603786..................4603787..................4603788..................4603789..................4603790..................4603791..................4603792..................4603793..................4603794..................4603795..................4603796..................4603797..................4603798..................4603799..................4603800..................4603801..................4603802..................4603803..................4603804..................4603805..................2503806..................2503807..................2503808..................2503809..................2503810..................2503811..................2503812..................2503813..................2503814..................2503815..................2503816..................2503817..................2503818..................2503819..................2503820..................2503821..................2503822..................2503823..................2503824..................2503825..................2503826..................2503827..................2503828..................2503829..................2503830..................2503831..................2503832..................2603833..................2603834..................2603835..................26
03836..................2603837..................2603838..................2603839..................2603840..................2603841..................2603842..................2603843..................2603844..................2603845..................2603846..................2603847..................2603848..................2603849..................2603850..................2603851..................2603852..................2603853..................2603854..................2603855..................2603856..................2603857..................2603858..................2603859..................2703860..................2703861..................2703862..................2703863..................2703864..................2703865..................2703866..................2703867..................2703868..................2703869..................2703870..................2703871..................2703872..................2703873..................2703874..................2703875..................2703876..................2703877..................2703878..................2703879..................2703880..................2703881..................2703882..................2703883..................2703884..................2703885..................2703886..................2803887..................2803888..................28
03889..................2803890..................2803891..................2803892..................2803893..................2803894..................2803895..................2803896..................2803897..................2803898..................2803899..................2803900..................2803901..................2803902..................2803903..................2803904..................2803905..................2803906..................2803907..................2803908..................2803909..................2803910..................2803911..................2803912..................2803913..................2903914..................2903915..................2903916..................2903917..................2903918..................2903919..................2903920..................2903921..................2903922..................2903923..................2903924..................2903925..................2903926..................2903927..................2903928..................2903929..................2903930..................2903931..................2903932..................2903933..................2903934..................2903935..................2903936..................2903937..................2903938..................2903939..................2903940..................3003941..................30
03942..................3003943..................3003944..................3003945..................3003946..................3003947..................3003948..................3003949..................3003950..................3003951..................3003952..................3003953..................3003954..................3003955..................3003956..................3003957..................3003958..................3003959..................3003960..................3003961..................3003962..................3003963..................3003964..................3003965..................3003966..................3003967..................3103968..................3103969..................3103970..................3103971..................3103972..................3103973..................3103974..................3103975..................3103976..................3103977..................3103978..................3103979..................3103980..................3103981..................3103982..................3103983..................3103984..................3103985..................3103986..................3103987..................3103988..................3103989..................3103990..................3103991..................3103992..................3103993..................31
66 www.ksptmicrotools.com
Fraction • Number • Letter • Metric Sizes
Decimal Equivalents
INCH METRIC DECIMALEQUIVALENT
– 0,10 0.0039
– 0,20 0.0079
– 0,25 0.0098
– 0,30 0.0118
#80 0,34 0.0135
– 0,35 0.0138
#79 0,37 0.0145
1/64 0,40 0.0156
#78 0,41 0.0160
– 0,45 0.0177
#77 0,46 0.0180
– 0,50 0.0197
#76 0,51 0.0200
#75 0,53 0.0210
– 0,55 0.0217
#74 0,57 0.0225
– 0,60 0.0236
#73 0,61 0.0240
#72 0,64 0.0250
– 0,65 0.0256
#71 0,66 0.0260
– 0,70 0.0276
#70 0,71 0.0280
#69 0,74 0.0292
– 0,75 0.0295
#68 0,79 0.0310
1/32 0,79 0.0313
– 0,80 0.0315
#67 0,81 0.0320
#66 0,84 0.0330
– 0,85 0.0335
#65 0,89 0.0350
– 0,90 0.0354
#64 0,91 0.0360
#63 0,94 0.0370
– 0,95 0.0374
#62 0,97 0.0380
#61 0,99 0.0390
– 1,00 0.0394
#60 1,02 0.0400
#59 1,04 0.0410
– 1,05 0.0413
#58 1,07 0.0420
#57 1,09 0.0430
– 1,10 0.0433
– 1,15 0.0453
#56 1,18 0.0465
3/64 1,19 0.0469
– 1,20 0.0472
– 1,25 0.0492
– 1,30 0.0512
#55 1,32 0.0520
– 1,35 0.0531
#54 1,40 0.0550
#53 1,51 0.0595
– 1,55 0.0610
1/16 1,59 0.0625
INCH METRIC DECIMALEQUIVALENT
– 1,60 0.0630
#52 1,61 0.0635
– 1,65 0.0650
#51 1,70 0.0669
– 1,75 0.0689
#50 1,78 0.0700
– 1,80 0.0709
#49 1,85 0.0728
– 1,90 0.0748
#48 1,93 0.0760
– 1,95 0.0768
5/64 1,98 0.0781
#47 1,99 0.0785
– 2,00 0.0787
– 2,05 0.0807
#46 2,06 0.0810
#45 2,08 0.0820
– 2,10 0.0827
– 2,15 0.0846
#44 2,18 0.0860
– 2,20 0.0866
– 2,25 0.0886
#43 2,26 0.0890
– 2,30 0.0906
– 2,35 0.0925
#42 2,37 0.0935
3/32 2,38 0.0938
– 2,40 0.0945
#41 2,44 0.0960
– 2,45 0.0965
#40 2,50 0.0984
#39 2,53 0.0995
#38 2,58 0.1015
– 2,60 0.1024
#37 2,64 0.1040
– 2,70 0.1063
#36 2,71 0.1065
– 2,75 0.1083
7/64 2,78 0.1094
#35 2,79 0.1100
– 2,80 0.1102
#34 2,82 0.1110
#33 2,87 0.1130
– 2,90 0.1142
#32 2,95 0.1160
– 3,00 0.1181
#31 3,05 0.1200
– 3,10 0.1220
1/8 3,18 0.1250
– 3,20 0.1260
– 3,25 0.1280
#30 3,26 0.1285
– 3,30 0.1299
– 3,40 0.1339
#29 3,45 0.1360
– 3,50 0.1378
#28 3,57 0.1405
INCH METRIC DECIMALEQUIVALENT
9/64 3,57 0.1406
– 3,60 0.1417
#27 3,66 0.1440
– 3,70 0.1457
#26 3,73 0.1470
– 3,75 0.1476
#25 3,80 0.1495
– 3,80 0.1496
#24 3,86 0.1520
– 3,90 0.1535
#23 3,91 0.1540
5/32 3,97 0.1562
#22 3,99 0.1570
– 4,00 0.1575
#21 4,04 0.1590
#20 4,09 0.1610
– 4,10 0.1614
– 4,20 0.1654
#19 4,22 0.1660
– 4,25 0.1673
– 4,30 0.1693
#18 4,31 0.1695
11/64 4,37 0.1719
#17 4,39 0.1730
– 4,40 0.1732
#16 4,50 0.1770
– 4,50 0.1772
#15 4,57 0.1800
– 4,60 0.1811
#14 4,62 0.1820
#13 4,70 0.1850
– 4,75 0.1870
3/16 4,76 0.1875
#12 4,80 0.1890
#11 4,85 0.1910
– 4,90 0.1929
#10 4,91 0.1935
#9 4,98 0.1960
– 5,00 0.1969
#8 5,05 0.1990
– 5,10 0.2008
#7 5,11 0.2010
13/64 5,16 0.2031
#6 5,18 0.2040
– 5,20 0.2047
#5 5,22 0.2055
– 5,25 0.2067
– 5,3 0.2087
#4 5,31 0.2090
– 5,40 0.2126
#3 5,41 0.2130
– 5,50 0.2165
7/32 5,56 0.2188
– 5,60 0.2205
#2 5,61 0.2210
– 5,70 0.2244
– 5,75 0.2264
INCH METRIC DECIMALEQUIVALENT
#1 5,79 0.2280
– 5,80 0.2283
– 5,90 0.2323
A 5,94 0.2340
15/64 5,95 0.2344
– 6,00 0.2362
B 6,05 0.2380
– 6,10 0.2402
C 6,15 0.2420
– 6,20 0.2441
D 6,25 0.2461
– 6,30 0.2480
E 6,35 0.2500
1/4 6,35 0.2500
– 6,40 0.2520
– 6,50 0.2559
F 6,53 0.2570
– 6,60 0.2598
G 6,63 0.2610
– 6,70 0.2638
17/64 6,75 0.2656
H 6,76 0.2660
– 6,80 0.2677
– 6,90 0.2717
I 6,91 0.2720
– 7,00 0.2756
J 7,04 0.2770
– 7,10 0.2795
K 7,14 0.2810
9/32 7,14 0.2812
– 7,20 0.2835
– 7,25 0.2854
– 7,30 0.2874
L 7,37 0.2900
– 7,40 0.2913
M 7,49 0.2950
– 7,50 0.2953
19/64 7,54 0.2969
– 7,60 0.2992
N 7,67 0.3020
– 7,70 0.3031
– 7,75 0.3051
– 7,80 0.3071
– 7,90 0.3110
5/16 7,94 0.3125
– 8,00 0.3150
O 8,03 0.3160
– 8,10 0.3189
– 8,20 0.3228
P 8,20 0.3230
– 8,25 0.3248
– 8,30 0.3268
21/64 8,33 0.3281
– 8,40 0.3307
Q 8,43 0.3320
– 8,50 0.3346
– 8,60 0.3386
INCH METRIC DECIMALEQUIVALENT
R 8,61 0.3390
– 8,70 0.3425
11/32 8,73 0.3438
– 8,75 0.3445
– 8,80 0.3465
S 8,84 0.3480
– 8,90 0.3504
– 9,00 0.3543
T 9,09 0.3580
– 9,10 0.3583
23/64 9,13 0.3594
– 9,20 0.3622
– 9,25 0.3642
– 9,30 0.3661
U 9,35 0.3680
– 9,40 0.3701
– 9,50 0.3740
3/8 9,53 0.3750
V 9,56 0.3770
– 9,60 0.3780
– 9,70 0.3819
– 9,75 0.3839
W 9,80 0.3858
– 9,90 0.3898
25/64 9,92 0.3906
– 10,00 0.3937
X 10,08 0.3970
– 10,10 0.3976
– 10,20 0.4016
Y 10,26 0.4040
– 10,30 0.4055
13/32 10,32 0.4062
– 10,40 0.4094
Z 10,49 0.4130
– 10,50 0.4134
– 10,60 0.4173
– 10,70 0.4213
27/64 10,72 0.4219
– 10,80 0.4252
– 10,90 0.4291
– 11,00 0.4331
– 11,10 0.4370
7/16 11,11 0.4375
– 11,20 0.4409
– 11,30 0.4449
– 11,40 0.4488
– 11,50 0.4528
29/64 11,51 0.4531
– 11,60 0.4567
– 11,70 0.4606
– 11,80 0.4646
– 11,90 0.4685
15/32 11,91 0.4688
– 12,00 0.4724
31/64 12,30 0.4844
– 12,50 0.4921
1/2 12,70 0.5000
INCH METRIC DECIMALEQUIVALENT
– 13,00 0.5118
33/64 13,10 0.5156
17/32 13,49 0.5312
– 13,50 0.5315
35/64 13,89 0.5469
– 14,00 0.5512
9/16 14,29 0.5625
– 14,50 0.5709
37/64 14,68 0.5781
– 15,00 0.5906
19/32 15,08 0.5938
39/64 15,48 0.6094
– 15,50 0.6102
5/8 15,88 0.6250
– 16,00 0.6299
41/64 16,27 0.6406
– 16,50 0.6496
21/32 16,67 0.6562
– 17,00 0.6693
43/64 17,07 0.6719
11/16 17,46 0.6875
– 17,50 0.6890
45/64 17,86 0.7031
– 18,00 0.7087
23/32 18,26 0.7188
– 18,50 0.7283
47/64 18,65 0.7344
– 19,00 0.7480
3/4 19,05 0.7500
49/64 19,45 0.7656
– 19,50 0.7677
25/32 19,84 0.7812
– 20,00 0.7874
51/64 20,24 0.7969
– 20,50 0.8071
13/16 20,64 0.8125
– 21,00 0.8268
53/64 21,03 0.8281
27/32 21,43 0.8438
– 21,50 0.8465
55/64 21,84 0.8594
– 22,00 0.8661
7/8 22,23 0.8750
– 22,50 0.8858
57/64 22,62 0.8906
– 23,00 0.9055
29/32 23,02 0.9062
59/64 23,42 0.9219
– 23,50 0.9252
15/16 23,81 0.9375
– 24,00 0.9449
61/64 24,21 0.9531
– 24,50 0.9646
31/32 24,61 0.9688
– 25,00 0.9843
63/64 25,00 0.9844
1 25,40 1.0000
67www.ksptmicrotools.com
Hardness Conversion ChartROCKWELL HARDNESS
(HRb)
ROCKWELL HARDNESS
(HRc)
BRINELL HARDNESS
(HB)
VICKERS HARDNESS
(HV)
TENSILE STRENGTH
(N/mm2)
PSI (1000lb/in2)
67 – 121 122 401 5870 – 126 127 432 6373 – 132 132 448 6575 – 136 137 455 6677 – 140 143 463 6780 – 147 150 479 6982 – 153 156 494 7284 – 159 163 525 7686 – 165 171 540 7889 – 177 178 556 8191 – 186 188 602 8893 – 197 196 632 9296 – 216 212 664 9797 – 223 218 695 10198 21 230 234 756 110– 22 236 241 772 112– 23 242 247 787 114– 24 248 255 818 118– 25 254 261 849 123– 27 266 269 865 125– 28 272 275 895 130– 29 278 284 911 132– 30 284 292 942 136– 31 293 300 973 141– 32 302 308 988 143– 33 310 318 1019 147– 34 319 327 1050 152– 35 328 337 1096 159– 37 345 349 1127 163– 38 353 359 1158 168– 39 362 370 1189 172– 40 370 381 1235 179– 41 381 395 1266 183– 42 391 408 1312 190– 44 411 422 1359 197– 45 422 437 1420 206– 46 433 452 1467 212– 48 455 470 1513 219– 50 479 497 1559 226– 51 485 517 1621 235– 52 497 532 1668 241– 54 – 573 1729 250– 56 – 609 1807 262– 57 – 630 1884 273– 59 – 670 1961 284– 60 – 698 2039 295– 61 – 725 – –– 62 – 740 – –– 63 – 780 – –– 64 – 812 – –– 65 – 847 – –– 66 – 885 – –– 67 – 926 – –– 68 – 971 – –
Conversions from each scale are approximate
SOLUTIONS AROUND THE GLOBEKYOCERA SGS Precision Tools is an ISO-certified leader of round solid carbide cutting tool technology for the aerospace, metalworking, and automotive industries with manufacturing sites in the United States and United Kingdom. Our global network of Sales Representatives, Industrial Distributors, and Agents blanket the world selling into more than 60 countries.
LEADERS IN SOLID CARBIDETOOL TECHNOLOGYBrand names such as Z-Carb, S-Carb®, V-Carb, Hi-PerCarb, Multi-Carb have become synonymous with high performance tooling in the machining and metalworking industry.
We’re proud to have pioneered some of the world’s most advanced cutting technology right here on our Northeast Ohio manufacturing campus. KSPT high performance end mills, drills and routers are increasing productivity and reducing cost around the world.
EXCEEDING CUSTOMER EXPECTATIONSAs the world’s manufacturing needs change, so does KSPT. It’s all about the science, starting with our lab inspected substrate materials to our tool designs and coatings. Our exceptional team of researchers, engineers, and machinists are dedicated to developing the absolute best and delivering the ultimate Value at the spindle®.
• Incredible batch-to-batch consistency• Metallurgical lab dedicated to testing
and rigorous quality control• ISO-certified quality procedures• Patented geometries that extend tool
life, reduce chatter, cut cycle times, and improve part quality—even at extreme parameters
• Specialists in extreme and demanding product applications
• Comprehensive tooling services• Experienced Field Sales Engineers
who work to optimize a tool for your particular application
• Dedicated multi-lingual customer service representatives
UNITED KINGDOMKYOCERA SGS Precision Tools Europe Ltd.10 Ashville WayWokingham, BerkshireRG41 2PL Englandphone: (44) 1189-795-200fax: (44) 1189-795-295e-mail: [email protected]: www.kyocera-sgstool.eu
JAPANKYOCERA Corporation International Sales Dept.6 Takeda Tobadono-cho, Fushimi-ku, Kyoto 612-8501, Japanphone: +81-75-604-3473 fax: +81-75-604-3472web: global.kyocera.com/prdct/tool/index.html
RUSSIAHALTECphone: (7) 495-252-05-00e-mail: [email protected]: www.haltec.ru
SPAINKYOCERA SGS Precision Tools IBERICAe-mail: [email protected]
THAILANDKYOCERA Asia Pacific (Thailand) Co., Ltd.1 Capital Work Place Building 7th Floor, Soi Chamchan, Sukhumvit 55 Road, Klongton Nua, Wattana, Bangkok 10110, Thailandphone: +66-2-030-6688 fax: +66-2-030-6600
SINGAPOREKYOCERA Asia Pacific Pte. Ltd.298 Tiong Bahru Road, #13-03/05 Central Plaza, Singapore 168730phone: +65-6373-6700 fax: +65-6271-0600web: asia.kyocera.com/products/cuttingtools/ index.html
CHINAKYOCERA (China) Sales & Trading CorporationRoom 140, Building A3, Daning Central Square, No. 700 Wanrong Road, Zhabei District, Shanghai, 200072, P.R. Chinaphone: +86-21-3660-7711 fax: +86-21-568-6200web: www.kyocera.com.cn/prdct/cuttingtool
EDP 00016 Rev 1218KYOCERA SGS Precision Tools
www.kyocera-sgstool.com
UNITED STATES OF AMERICAKYOCERA SGS Precision ToolsP.O. Box 18755 South Main StreetMunroe Falls, Ohio 44262 U.S.A.customer service -US and Canada: (330) 686-5700fax - US & Canada: (800) 447-4017international fax: (330) 686-2146orders: [email protected] web: www.kyocera-sgstool.com
EASTERN EUROPESINTCOMSintcom Tools95 Arsenalski Blvd.1421 Sofia, Bulgaria phone: (359) 283-64421fax: (359) 286-52493e-mail: [email protected]
FRANCEDOGA-KSPTE FRANCE8, Avenue Gutenburg78310 Maurepas, Francephone: +33 (0) 1 30 66 41 64fax: +33 (0) 1 30 66 41 49e-mail: [email protected]: www.doga.fr
INDIAKYOCERA Asia Pacific India Pvt. LtdPlot No.51, Phase-l, Udyog Vihar Gurgaon 122016, Haryana, Indiaphone: +91-124-4025022 fax: +91-124-4025001
KOREAKYOCERA Precision Tools Korea Co., Ltd.2LT 69BL, Namdong Industrial Estate, 638-1, Kozan-Dong, Namdong Incheon, Koreaphone: +82-32-821-8365 fax: +82-32-821-8369web: www.kptk.co.kr/
POLANDKYOCERA SGS Precision Toolsphone: +48 530 432 002e-mail: [email protected]
COMMERCIAL OFFICES
KSPT PRODUCTS ARE DISTRIBUTED BY: