MHPL Product Cataloguemhpl.co.in/catalogue/mhpl-full-catalogue.pdf01 Mahavir Hydraulics Private...

Product Catalogue

Mahavir Hydraulics Private Limited (MHPL) is a family owned business started by the ZAVERI family, based in financial

capital of India, Mumbai. Since inception, the company is acting as a channel partner to M/s. Gandhi Special Tubes Ltd, a

company manufacturing PRECISION COLD DRAWN SEAMLESS TUBES having its plant setup in technical collaboration

with Benteler AG, Germany.

With the increase in the demography of its customers, MHPL started increasing its product base with the aim to provide an

all-inclusive solution to its customers and introduced STAINLESS STEEL TUBES, DOWTY GEAR PUMPS, POLYHYDRON

HYDRAULIC VALVES, PIPE CLAMPS and other HYDRAULIC ACCESSORIES to its product catalogue.

By earning a long and enviable record in serving its customers with quality products, MHPL started manufacturing of

HYDRAULIC TUBE FITTINGS and HYDRAULIC HOSE FITTINGS to cater to the ever-growing demand of various industries.

MHPL manufactures various tube fittings and hose fittings including parts of special requirements in its CNC enabled plant

that ensures efficiency, consistency and finishing of the highest quality. The fittings are manufactured in CS and SS

material. MHPL also undertakes a ‘VALUE ADDED’ service in which MHPL manufactures custom made fittings as per the

special requirements and drawings of the customers from various industries. MHPL has also set up a hose assembling unit

by installing a Uniflex crimping (press) machine, the first in India with crimping capacity of up to 10 inches.

MHPL also has an in-house pressure testing facility that can test up to 700 BAR in static and 500 BAR in impulse pressure.

In 2011, Semperit, Austria, with a history dating back to 1824, introduced its products in India and MHPL was one of the first

channel partners to one of the world’s leading rubber hose manufacturer. The partnership has since then only grown with

MHPL remaining as one of the leading suppliers of SEMPERIT RUBBER HOSES in the country.

ABOUTUS

OUR VISION

To become an internationally

renowned brand in hydraulics

synonymous to our products

OUR MISSION

To engage with the companies to

develop a long term strategic alliance

in India and Overseas

OUR GOAL

To provide best quality products and

services and build an environment of

understanding and trust

TABLE OF CONTENT

Hydraulic Tube Fittings

Hydraulic Hose Fittings

Pipe Clamps

MS Seamless Tubes

SS Seamless Tubes

Hydraulic Hose

Dowty Gear Pumps

Polyhydron Hydraulic Valves

Hydraulic Accessories & Other

Products

01

23

27

35

38

42

45

46

47

01 Mahavir Hydraulics Private Limited

HYDRAULIC TUBE FITTINGS

Tube Connection Parts

Series PN [bar] Part No. Nut Part No.FreeuleTube

O.D.M

S 2

[mm]

h 1

[mm]

L 1

[mm]

L2

[mm]

L3

[mm]

�Ød3

[mm]

�Ød1

[mm]

Ød4

[mm]

*L

[mm]

L

250N6L F6L 6 M 12 X 1.5 14 14.5 10 10 7 4 6 8.1 18

N8L F8L 8 M 14 X 1.5 17 14.5 9.5 10 7 6 8 10.1 18

N10L F10L 10 M 16 X 1.5 19 15.5 10 11 7 8 10 12.3 19

N12L F12L 12 M18 X 1.5 22 15.5 9.5 11 7 10 12 14.3 19

N15L F15L 15 M22 X 1.5 27 17 10 12 7 12 15 17.3 21

160N18L F18L 18 M 26X 1.5 32 18 10 12 7.5 15 18 20.3 22

N22L F22L 22 M 30 X 2.0 36 20 10.5 14 7.5 19 22 24.3 24

100

N28L F28L 28 M 36 X 2.0 41 21 11 14 7.5 24 28 30.3 25

N35L F35L 35 M 45 X 2.0 50 24 13 16 10.5 30 35 38 28

N42L F42L 42 M 52 X2.0 60 24 13 16 11 36 42 45.5 28

S

630

N6S F6S 6 M 14 X 1.5 17 16.5 10 12 7 4 6 8.1 20

N8S F8S 8 M 16 X 1.5 19 16.5 9.5 12 7 5 8 10.1 20

N10S F10S 10 M 18 X1.5 22 17.5 10 12 7.5 7 10 12.3 20

N12S F12S 12 M 20 X 1.5 24 17.5 9.5 12 7.5 8 12 14.3 21

400

N14S F14S 14 M 22 X 1.5 27 20.5 10 14 8 10 14 16.3 21

N16S F16S 16 M 24 X 1.5 30 20.5 10 14 8.5 12 16 18.3 25

N20S F20S 20 M 30 X 2.0 36 24.5 12 16 10.5 16 20 22.9 28

250

N25S F25S 25 M 36 X 2.0 46 27 12 18 12 20 25 27.9 31

N30S F30S 30 M 42 X 2.0 50 29 13 20 13.5 25 30 33 35

N38S F38S 38 M 52 X 2.0 60 32.5 13 22 16 32 38 41 38

Metric Tube End as per ISO 8434

Dimensions given are approx figures with tightened Nut.

1

02Mahavir Hydraulics Private Limited

Straight Coupling

Series PN [bar] ØD1 [mm] ØD3 [mm] L1 [mm] L2 [mm] L3 [mm] S1 [mm] S2 [mm] Ordering Code *

L

250

6 4.0 24 10 40 12 14 MH-G 06 L

8 6.0 25 11 41 14 17 MH-G 08 L

10 8.0 27 13 43 17 19 MH-G 10 L

12 10.0 28 14 44 19 22 MH-G 12 L

15 12.0 30 16 46 24 27 MH-G 15 L

16018 15.0 31 16 49 27 32 MH-G 18 L

22 19.0 35 20 53 32 36 MH-G 22 L

100

28 24.0 36 21 54 41 41 MH-G 28 L

35 30.0 41 20 63 46 50 MH-G 35 L

42 36.0 43 21 67 55 60 MH-G 42 L

S

630

6 4.0 30 16 46 14 17 MH-G 06 S

8 5.0 32 18 48 17 19 MH-G 08 S

10 7.0 32 17 50 19 22 MH-G 10 S

12 8.0 34 19 52 22 24 MH-G 12 S

400

14 10.0 38 22 58 24 27 MH-G 14 S

16 12.0 38 21 58 27 30 MH-G 16 S

20 16.0 44 23 66 32 36 MH-G 20 S

25 20.0 50 26 74 41 46 MH-G 25 S

25030 25.0 54 27 80 46 50 MH-G 30 S

38 32.0 61 29 91 55 60 MH-G 38 S

Equal Elbow


L

250

6 4.0 19 12.0 27 12 14 MH-W 06 L

8 6.0 21 14.0 29 12 17 MH-W 08 L

10 8.0 22 15.0 30 14 19 MH-W 10 L

12 10.0 24 17.0 32 17 22 MH-W 12 L

15 12.0 28 21.0 36 19 27 MH-W 15 L

16018 15.0 31 23.5 40 24 32 MH-W 18 L

22 19.0 35 27.5 44 27 36 MH-W 22 L

100

28 24.0 38 30.5 47 36 41 MH-W 28 L

35 30.0 45 34.5 56 41 50 MH-W 35 L

42 36.0 51 40.0 63 50 60 MH-W 42 L

S

630

6 4.0 23 16.0 31 12 17 MH-W 06 S

8 5.0 24 17.0 32 14 19 MH-W 08 S

10 7.0 25 17.5 34 17 22 MH-W 10 S

12 8.0 29 21.5 38 17 24 MH-W 12 S

400

14 10.0 30 22.0 40 19 27 MH-W 14 S

16 12.0 33 24.5 43 24 30 MH-W 16 S

20 16.0 37 26.5 48 27 36 MH-W 20 S

25 20.0 42 30.0 54 36 46 MH-W 25 S

25030 25.0 49 35.5 62 41 50 MH-W 30 S

38 32.0 57 41.0 72 50 60 MH-W 38 S


Equal Tee


L

250

6 4.0 19 12.0 27 12 14 MH- T 06 L

8 6.0 21 14.0 29 12 17 MH- T 08 L

10 8.0 22 15.0 30 14 19 MH- T 10 L

12 10.0 24 17.0 32 17 22 MH- T 12 L

15 12.0 28 21.0 36 19 27 MH- T 15 L

16018 15.0 31 23.5 40 24 32 MH- T 18 L

22 19.0 35 27.5 44 27 36 MH- T 22 L

100

28 24.0 38 30.5 47 36 41 MH- T 28 L

35 30.0 45 34.5 56 41 50 MH- T 35 L

42 36.0 51 40.0 63 50 60 MH- T 42 L

S

630

6 4.0 23 16.0 31 12 17 MH- T 06 S

8 5.0 24 17.0 32 14 19 MH- T 08 S

10 7.0 25 17.5 34 17 22 MH- T 10 S

12 8.0 29 21.5 38 17 24 MH- T 12 S

400

14 10.0 30 22.0 40 19 27 MH- T 14 S

16 12.0 33 24.5 43 24 30 MH- T 16 S

20 16.0 37 26.5 48 27 36 MH- T 20 S

25 20.0 42 30.0 54 36 46 MH- T 25 S

25030 25.0 49 35.5 62 41 50 MH- T 30 S

38 32.0 57 41.0 72 50 60 MH- T 38 S


Equal Cross


L

250

6 4.0 19 12.0 27 12 14 MH-K 06 L

8 6.0 21 14.0 29 12 17 MH-K 08 L

10 8.0 22 15.0 30 14 19 MH-K 10 L

12 10.0 24 17.0 32 17 22 MH-K 12 L

15 12.0 28 21.0 36 19 27 MH-K 15 L

16018 15.0 31 23.5 40 24 32 MH-K 18 L

22 19.0 35 27.5 44 27 36 MH-K 22 L

100

28 24.0 38 30.5 47 36 41 MH-K 28 L

35 30.0 45 34.5 56 41 50 MH-K 35 L

42 36.0 51 40.0 63 50 60 MH-K 42 L

S

630

6 4.0 23 16.0 31 12 17 MH-K 06 S

8 5.0 24 17.0 32 14 19 MH-K 08 S

10 7.0 25 17.5 34 17 22 MH-K 10 S

12 8.0 29 21.5 38 17 24 MH-K 12 S

400

14 10.0 30 22.0 40 19 27 MH-K 14 S

16 12.0 33 24.5 43 24 30 MH-K 16 S

20 16.0 37 26.5 48 27 36 MH-K 20 S

25 20.0 42 30.0 54 36 46 MH-K 25 S

25030 25.0 49 35.5 62 41 50 MH-K 30 S

38 32.0 57 41.0 72 50 60 MH-K 38 S



Series PN [bar]ØD1

[mm]

ØD3

[mm] L1 [mm] L2 [mm] L3 [mm] L4 [mm] L5 [mm] L6 [mm]

S1

[mm]

S2

[mm]

S3

[mm]Ordering Code *

L

250

6 4 14 7.0 34 27.0 22 42 17 17 14 MH- SV 06 L

8 6 15 8.0 34 27.0 23 42 19 19 17 MH- SV 08 L

10 8 17 10.0 35 28.0 25 43 22 22 19 MH- SV 10 L

12 10 17 10.0 36 29.0 25 44 24 24 22 MH- SV 12 L

15 12 19 12.0 38 31.0 27 46 27 30 27 MH- SV 15 L

16018 15 21 13.5 40 32.5 30 49 32 36 32 MH- SV 18 L

22 19 24 16.5 42 34.5 33 51 36 41 36 MH- SV 22 L

100

28 24 26 18.5 43 35.5 35 52 41 46 41 MH- SV 28 L

35 30 29 18.5 47 36.5 40 58 50 55 50 MH- SV 35 L

42 36 30 19.0 47 36.0 42 59 60 65 60 MH- SV 42 L

S

630

6 4 19 12.0 36 29.0 27 44 19 19 17 MH- SV 06 S

8 5 20 13.0 36 29.0 28 44 22 22 19 MH- SV 08 S

10 7 22 14.5 37 29.5 31 46 24 24 22 MH- SV 10 S

12 8 22 14.5 38 30.5 31 47 27 27 24 MH- SV 12 S

400

14 10 25 17.0 40 32.0 35 50 30 30 27 MH- SV 14 S

16 12 25 16.5 40 31.5 35 50 32 32 30 MH- SV 16 S

20 16 28 17.5 44 33.5 39 55 41 41 36 MH- SV 20 S

25 20 32 20.0 47 35.0 44 59 46 46 46 MH- SV 25 S

25030 25 35 21.5 51 37.5 48 64 50 50 50 MH- SV 30 S

38 32 38 22.0 53 37.0 53 68 65 65 60 MH- SV 38 S

Bulk Head Union


Bulk Head Elbow Union

Series PN [bar]ØD1

[mm]

ØD3

[mm]

ØD4

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

L6

[mm]

L7

[mm]

S1

[mm]

S2

[mm]

S3

[mm] Ordering Code *

L

250

6 4 17 19 12.0 14 27.0 48 27 42 12 17 14 MH-WSV 06 L

8 6 19 21 14.0 17 27.0 51 29 42 12 19 17 MH-WSV 08 L

10 8 22 22 15.0 18 28.0 53 30 43 14 22 19 MH-WSV 10 L

12 10 24 24 17.0 20 29.0 56 32 44 17 24 22 MH-WSV 12 L

15 12 27 28 21.0 23 31.0 61 36 46 19 30 27 MH-WSV 15 L

16018 15 32 31 23.5 24 32.5 64 40 49 24 36 32 MH-WSV 18 L

22 19 36 35 27.5 30 34.5 72 44 51 27 41 36 MH-WSV 22 L

100

28 24 42 38 30.5 34 35.5 77 47 52 36 46 41 MH-WSV 28 L

35 30 50 45 34.5 39 36.5 86 56 58 41 55 50 MH-WSV 35 L

42 36 60 51 40.0 43 36.0 90 63 59 50 65 60 MH-WSV 42 L

S

630

6 4 19 23 16.0 17 29.0 53 31 44 12 19 17 MH-WSV 06 S

8 5 22 24 17.0 18 29.0 54 32 44 14 22 19 MH-WSV 08 S

10 7 24 25 17.5 20 29.5 57 34 46 17 24 22 MH-WSV 10 S

12 8 27 29 21.5 21 30.5 59 38 47 17 27 24 MH-WSV 12 S

400

14 10 27 30 22.0 23 32.0 63 40 50 19 30 27 MH-WSV 14 S

16 12 30 33 24.5 24 31.5 64 43 50 24 32 30 MH-WSV 16 S

20 16 36 37 26.5 30 33.5 74 48 55 27 41 36 MH-WSV 20 S

25 20 42 42 30.0 34 35.0 81 54 59 36 46 46 MH-WSV 25 S

25030 25 50 49 35.5 39 37.5 90 62 64 41 50 50 MH-WSV 30 S

38 32 60 57 41.0 43 37.0 96 72 68 50 65 60 MH-WSV 38 S


Stand Pipe Connector

Series PN [bar]ØD1

[mm]

T

ØD3

[mm]

ØD4

[mm]

L1

[mm]

L2

[mm]

S1

[mm]

S2

[mm]Ordering Code *

L

250

6 G1/8A 3.5 14 24.5 8 14 14 MH-EVGE 06 LR

8 G1/4A 4.5 19 29.5 12 19 17 MH-EVGE 08 LR

10 G1/4A 7.0 19 27.5 12 19 19 MH-EVGE 10 LR

12 G3/8A 7.5 22 34.0 12 22 22 MH-EVGE 12 LR

12 G1/4A 7.0 19 28.5 12 19 22 MH-EVGE 12 LR 1/4

12 G1/2A 7.5 27 34.5 14 27 22 MH-EVGE 12 LR 1/2

15 G1/2A 11.0 27 32.0 14 27 27 MH-EVGE 15 LR

16018 G1/2A 14.0 27 31.5 14 27 32 MH-EVGE 18 LR

22 G3/4A 18.0 32 32.5 16 32 36 MH-EVGE 22 LR

100

28 G1A 23.0 40 35.0 18 41 41 MH-EVGE 28 LR

35 G 1 1/4A 29.5 50 42.5 20 50 50 MH-EVGE 35 LR

42 G1 1/2A 35.5 55 46.5 22 55 60 MH-EVGE 42 LR

S

630

6 G1/4A 3.5 19 27.0 12 19 17 MH-EVGE 06 SR

8 G1/4A 4.5 19 29.5 12 19 19 MH-EVGE 08 SR

10 G3/8A 6.5 22 32.0 12 22 22 MH-EVGE 10 SR

12 G3/8A 7.5 22 34.0 12 22 24 MH-EVGE 12 SR

12 G1/2A 7.5 27 34.5 14 27 24 MH-EVGE 12 SR 1/2

400

14 G1/2A 9.5 27 36.5 14 27 27 MH-EVGE 14 SR

16 G1/2A 11.5 27 37.0 14 27 30 MH-EVGE 16 SR

16 G3/4A 11.5 32 39.0 16 32 30 MH-EVGE 16 SR 3/4

20 G3/4A 15.5 32 43.0 16 32 36 MH-EVGE 20 SR

25 G1A 18.0 40 48.0 18 41 46 MH-EVGE 25 SR

25030 G 1 1/4A 23.0 50 51.0 20 50 50 MH-EVGE 30 SR

38 G1 1/2A 29.0 55 60.0 22 55 60 MH-EVGE 38 SR

Note: For Elaestomatic Seal, Add “ED” at the End of Code.

Series PN [bar] ØD1 [mm] ØD3 [mm] L1 [mm] L2 [mm] L3 [mm] L4 [mm] S1 [mm] S2 [mm] Ordering Code *

L

250

6 4 19 12.0 26.0 27 12 14 MH-EVW 06 L

8 6 21 14.0 27.5 29 12 17 MH-EVW 08 L

10 8 22 15.0 29.0 30 14 19 MH-EVW 10 L

12 10 24 17.0 29.5 32 17 22 MH-EVW 12 L

15 12 28 21.0 32.5 36 19 27 MH-EVW 15 L

16018 15 31 23.5 35.5 40 24 32 MH-EVW 18 L

22 19 35 27.5 38.5 44 27 36 MH-EVW 22 L

100

28 24 38 30.5 43.5 47 36 41 MH-EVW 28 L

35 30 45 34.5 51.0 56 41 50 MH-EVW 35 L

42 36 51 40.0 56.0 63 50 60 MH-EVW 42 L

S

630

6 4 23 16.0 27.0 31 12 17 MH-EVW 06 S

8 5 24 17.0 28.0 32 14 19 MH-EVW 08 S

10 7 25 17.5 31.0 34 17 22 MH-EVW 10 S

12 8 29 21.5 33.0 38 17 24 MH-EVW 12 S

400

14 10 30 22.0 35.0 40 19 27 MH-EVW 14 S

16 12 33 24.5 37.5 43 24 30 MH-EVW 16 S

20 16 37 26.5 44.5 48 27 36 MH-EVW 20 S

25 20 42 30.0 50.0 54 36 46 MH-EVW 25 S

25030 25 49 35.5 55.0 62 41 50 MH-EVW 30 S

38 32 57 41.0 63.0 72 50 60 MH-EVW 38 S

Swivel Elbow


Swivel Branch Tee


L

250

6 4 19 12.0 26.0 27 12 14 MH-EVT 06 L

8 6 21 14.0 27.5 29 12 17 MH-EVT 08 L

10 8 22 15.0 29.0 30 14 19 MH-EVT 10 L

12 10 24 17.0 29.5 32 17 22 MH-EVT 12 L

15 12 28 21.0 32.5 36 19 27 MH-EVT 15 L

16018 15 31 23.5 35.5 40 24 32 MH-EVT 18 L

22 19 35 27.5 38.5 44 27 36 MH-EVT 22 L

100

28 24 38 30.5 43.5 47 36 41 MH-EVT 28 L

35 30 45 34.5 51.0 56 41 50 MH-EVT 35 L

42 36 51 40.0 56.0 63 50 60 MH-EVT 42 L

S

630

6 4 23 16.0 27.0 31 12 17 MH-EVT 06 S

8 5 24 17.0 28.0 32 14 19 MH-EVT 08 S

10 7 25 17.5 31.0 34 17 22 MH-EVT 10 S

12 8 29 21.5 33.0 38 17 24 MH-EVT 12 S

400

14 10 30 22.0 35.0 40 19 27 MH-EVT 14 S

16 12 33 24.5 37.5 43 24 30 MH-EVT 16 S

20 16 37 26.5 44.5 48 27 36 MH-EVT 20 S

25 20 42 30.0 50.0 54 36 46 MH-EVT 25 S

25030 25 49 35.5 55.0 62 41 50 MH-EVT 30 S

38 32 57 41.0 63.0 72 50 60 MH-EVT 38 S



L

250

6 4 19 12.0 26.0 27 12 14 MH-EVL 06 L

8 6 21 14.0 27.5 29 12 17 MH-EVL 08 L

10 8 22 15.0 29.0 30 14 19 MH-EVL 10 L

12 10 24 17.0 29.5 32 17 22 MH-EVL 12 L

15 12 28 21.0 32.5 36 19 27 MH-EVL 15 L

16018 15 31 23.5 35.5 40 24 32 MH-EVL 18 L

22 19 35 27.5 38.5 44 27 36 MH-EVL 22 L

100

28 24 38 30.5 43.5 47 36 41 MH-EVL 28 L

35 30 45 34.5 51.0 56 41 50 MH-EVL 35 L

42 36 51 40.0 56.0 63 50 60 MH-EVL 42 L

S

630

6 4 23 16.0 27.0 31 12 17 MH-EVL 06 S

8 5 24 17.0 28.0 32 14 19 MH-EVL 08 S

10 7 25 17.5 31.0 34 17 22 MH-EVL 10 S

12 8 29 21.5 33.0 38 17 24 MH-EVL 12 S

400

14 10 30 22.0 35.0 40 19 27 MH-EVL 14 S

16 12 33 24.5 37.5 43 24 30 MH-EVL 16 S

20 16 37 26.5 44.5 48 27 36 MH-EVL 20 S

25 20 42 30.0 50.0 54 36 46 MH-EVL 25 S

25030 25 49 35.5 55.0 62 41 50 MH-EVL 30 S

38 32 57 41.0 63.0 72 50 60 MH-EVL 38 S

Swivel Run Tee



Swivel Elbow with Connector

Series PN [bar]ØD1

[mm]T

ØD3

[mm]

ØD4

[mm]

ØD5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

S1

[mm]

S2

[mm]

S3

[mm]Ordering Code *

L

250

6 G1/8A 4 4 14 19 12.0 34.5 8 27 12 14 14 MH-EVWR 06 LR

8 G1/4A 6 6 18 21 14.0 37.5 12 29 12 17 19 MH-EVWR 08 LR

10 G1/4A 8 6 18 22 15.0 40.0 12 30 14 19 19 MH-EVWR 10 LR

12 G3/8A 10 9 22 24 17.0 42.0 12 32 17 22 22 MH-EVWR 12 LR

15 G1/2A 12 11 26 28 21.0 46.5 14 36 19 27 27 MH-EVWR 15 LR

16018 G1/2A 15 14 26 31 23.5 50.0 14 40 24 32 27 MH-EVWR 18 LR

22 G3/4A 19 18 32 35 27.5 55.0 16 44 27 36 32 MH-EVWR 22 LR

100

28 G1A 24 23 39 38 30.5 61.0 18 47 36 41 41 MH-EVWR 28 LR

35 G1 1/4A 30 30 49 45 34.5 68.5 20 56 41 50 50 MH-EVWR 35 LR

42 G1 1/2A 36 36 55 51 40.0 75.0 22 63 50 60 55 MH-EVWR 42 LR

S

630

6 G1/4A 4 4 18 23 16.0 40.0 12 31 12 17 19 MH-EVWR 06 SR

8 G1/4A 5 5 18 24 17.0 43.0 12 32 14 19 19 MH-EVWR 08 SR

10 G3/8A 7 7 22 25 17.5 46.0 12 34 17 22 22 MH-EVWR 10 SR

12 G3/8A 8 8 22 29 21.5 50.0 12 38 17 24 22 MH-EVWR 12 SR

400

14 G1/2A 10 10 26 30 22.0 54.0 14 40 19 27 27 MH-EVWR 14 SR

16 G1/2A 12 12 26 33 24.5 56.0 14 43 24 30 27 MH-EVWR 16 SR

20 G3/4A 16 16 32 37 26.5 65.0 16 48 27 36 32 MH-EVWR 20 SR

25 G1A 20 20 39 42 30.0 73.0 18 54 36 46 41 MH-EVWR 25 SR

25030 G1 1/4A 25 25 49 49 35.5 78.5 20 62 41 50 50 MH-EVWR 30 SR

38 G1 1/2A 32 32 55 57 41.0 89.0 22 72 50 60 55 MH-EVWR 38 SR


Swivel Branch Tee with Connector

Series PN [bar]ØD1

[mm]T

ØD3

[mm]

ØD4

[mm]

ØD5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

S1

[mm]

S2

[mm]

S3


L

250

6 G1/8A 4 4 14 19 12.0 34.5 8 27 12 14 14 MH-EVTR 06 LR

8 G1/4A 6 6 18 21 14.0 37.5 12 29 12 17 19 MH-EVTR 08 LR

10 G1/4A 8 6 18 22 15.0 40.0 12 30 14 19 19 MH-EVTR 10 LR

12 G3/8A 10 9 22 24 17.0 42.0 12 32 17 22 22 MH-EVTR 12 LR

15 G1/2A 12 11 26 28 21.0 46.5 14 36 19 27 27 MH-EVTR 15 LR

16018 G1/2A 15 14 26 31 23.5 50.0 14 40 24 32 27 MH-EVTR 18 LR

22 G3/4A 19 18 32 35 27.5 55.0 16 44 27 36 32 MH-EVTR 22 LR

100

28 G1A 24 23 39 38 30.5 61.0 18 47 36 41 41 MH-EVTR 28 LR

35 G1 1/4A 30 30 49 45 34.5 68.5 20 56 41 50 50 MH-EVTR 35 LR

42 G1 1/2A 36 36 55 51 40.0 75.0 22 63 50 60 55 MH-EVTR 42 LR

S

630

6 G1/4A 4 4 18 23 16.0 40.0 12 31 12 17 19 MH-EVTR 06 SR

8 G1/4A 5 5 18 24 17.0 43.0 12 32 14 19 19 MH-EVTR 08 SR

10 G3/8A 7 7 22 25 17.5 46.0 12 34 17 22 22 MH-EVTR 10 SR

12 G3/8A 8 8 22 29 21.5 50.0 12 38 17 24 22 MH-EVTR 12 SR

400

14 G1/2A 10 10 26 30 22.0 54.0 14 40 19 27 27 MH-EVTR 14 SR

16 G1/2A 12 12 26 33 24.5 56.0 14 43 24 30 27 MH-EVTR 16 SR

20 G3/4A 16 16 32 37 26.5 65.0 16 48 27 36 32 MH-EVTR 20 SR

25 G1A 20 20 39 42 30.0 73.0 18 54 36 46 41 MH-EVTR 25 SR

25030 G1 1/4A 25 25 49 49 35.5 78.5 20 62 41 50 50 MH-EVTR 30 SR

38 G1 1/2A 32 32 55 57 41.0 89.0 22 72 50 60 55 MH-EVTR 38 SR


Swivel Run Tee with Connector

Series PN [bar]ØD1

[mm]T

ØD3

[mm]

ØD4

[mm]

ØD5

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

L5

[mm]

S1

[mm]

S2

[mm]

S3

[mm]Ordering Code *

L

250

6 G1/8A 4 4 14 19 12.0 34.5 8 27 12 14 14 MH-EVLR 06 LR

8 G1/4A 6 6 18 21 14.0 37.5 12 29 12 17 19 MH-EVLR 08 LR

10 G1/4A 8 6 18 22 15.0 40.0 12 30 14 19 19 MH-EVLR 10 LR

12 G3/8A 10 9 22 24 17.0 42.0 12 32 17 22 22 MH-EVLR 12 LR

15 G1/2A 12 11 26 28 21.0 46.5 14 36 19 27 27 MH-EVLR 15 LR

16018 G1/2A 15 14 26 31 23.5 50.0 14 40 24 32 27 MH-EVLR 18 LR

22 G3/4A 19 18 32 35 27.5 55.0 16 44 27 36 32 MH-EVLR 22 LR

100

28 G1A 24 23 39 38 30.5 61.0 18 47 36 41 41 MH-EVLR 28 LR

35 G1 1/4A 30 30 49 45 34.5 68.5 20 56 41 50 50 MH-EVLR 35 LR

42 G1 1/2A 36 36 55 51 40.0 75.0 22 63 50 60 55 MH-EVLR 42 LR

S

630

6 G1/4A 4 4 18 23 16.0 40.0 12 31 12 17 19 MH-EVLR 06 SR

8 G1/4A 5 5 18 24 17.0 43.0 12 32 14 19 19 MH-EVLR 08 SR

10 G3/8A 7 7 22 25 17.5 46.0 12 34 17 22 22 MH-EVLR 10 SR

12 G3/8A 8 8 22 29 21.5 50.0 12 38 17 24 22 MH-EVLR 12 SR

400

14 G1/2A 10 10 26 30 22.0 54.0 14 40 19 27 27 MH-EVLR 14 SR

16 G1/2A 12 12 26 33 24.5 56.0 14 43 24 30 27 MH-EVLR 16 SR

20 G3/4A 16 16 32 37 26.5 65.0 16 48 27 36 32 MH-EVLR 20 SR

25 G1A 20 20 39 42 30.0 73.0 18 54 36 46 41 MH-EVLR 25 SR

25030 G1 1/4A 25 25 49 49 35.5 78.5 20 62 41 50 50 MH-EVLR 30 SR

38 G1 1/2A 32 32 55 57 41.0 89.0 22 72 50 60 55 MH-EVLR 38 SR


Closure Plug

Series PN [bar] ØD1 [mm] L1 [mm] L2 [mm] L3 [mm] S1 [mm] S2 [mm] Ordering Code*

L

250

6 14 7.0 22 12 14 MH-BUZT 06 L

8 15 8.0 23 14 17 MH-BUZT 08 L

10 16 9.0 24 17 19 MH-BUZT 10 L

12 17 10.0 25 19 22 MH-BUZT 12 L

15 18 11.0 26 24 27 MH-BUZT 15 L

16018 19 11.5 28 27 32 MH-BUZT 18 L

22 21 13.5 30 32 36 MH-BUZT 22 L

100

28 22 14.5 31 41 41 MH-BUZT 28 L

35 25 14.5 36 46 50 MH-BUZT 35 L

42 27 16.0 39 55 60 MH-BUZT 42 L

S

630

6 18 11.0 26 14 17 MH-BUZT 06 S

8 20 13.0 28 17 19 MH-BUZT 08 S

10 20 12.5 29 19 22 MH-BUZT 10 S

12 22 14.5 31 22 24 MH-BUZT 12 S

400

14 24 16.0 34 24 27 MH-BUZT 14 S

16 24 15.5 34 27 30 MH-BUZT 16 S

20 28 17.5 39 32 36 MH-BUZT 20 S

25 32 20.0 44 41 46 MH-BUZT 25 S

25030 34 20.5 47 46 50 MH-BUZT 30 S

38 39 23.0 54 55 60 MH-BUZT 38 S


Parallel Male Stud Coupling


Series PN [bar]ØD1

[mm] T

ØD3

[mm]

ØD4

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

S1

[mm]

S2

[mm]Ordering Code *

L

250

6 G1/8A 4 14 23.5 8.5 8 23.5 14 14 MH-GE 06 LR

6 G1/4A 4 19 29.0 10.0 12 25.0 19 14 MH-GE 06 LR 1/4

6 G3/8A 4 22 30.5 11.5 12 26.5 22 14 MH-GE 06 LR 3/8

6 G1/2A 4 27 33.0 12.0 14 27.0 27 14 MH-GE 06 LR 1/2

8 G1/4A 6 19 29.0 10.0 12 25.0 19 17 MH-GE 08 LR

8 G1/8A 4 14 24.5 9.5 8 24.5 14 17 MH-GE 08 LR 1/8

8 G3/8A 6 22 30.5 11.5 12 26.5 22 17 MH-GE 08 LR 3/8

8 G1/2A 6 27 33.0 12.0 14 27.0 27 17 MH-GE 08 LR 1/2

10 G1/4A 6 19 30.0 11.0 12 26.0 19 19 MH-GE 10 LR

10 G1/8A 4 14 25.5 10.5 8 25.5 17 19 MH-GE 10 LR 1/8

10 G3/8A 8 22 31.5 12.5 12 27.5 22 19 MH-GE 10 LR 3/8

10 G1/2A 8 27 34.0 13.0 14 28.0 27 19 MH-GE 10 LR 1/2

12 G3/8A 9 22 31.5 12.5 12 27.5 22 22 MH-GE 12 LR

12 G1/8A 4 14 26.5 11.5 8 26.5 19 22 MH-GE 12 LR 1/8

12 G1/4A 6 19 31.0 12.0 12 27.0 19 22 MH-GE 12 LR 1/4

12 G1/2A 10 27 34.0 13.0 14 28.0 27 22 MH-GE 12 LR 1/2

12 G3/4A 10 32 37.0 14.0 16 29.0 32 22 MH-GE 12 LR 3/4

15 G1/2A 11 27 35.0 14.0 14 29.0 27 27 MH-GE 15 LR

15 G3/8A 9 22 32.5 13.5 12 28.5 24 27 MH-GE 15 LR 3/8

15 G3/4A 12 32 38.0 15.0 16 30.0 32 27 MH-GE 15 LR 3/4

160

18 G1/2A 14 27 36.0 14.5 14 31.0 27 32 MH-GE 18 LR

18 G3/8A 9 22 33.5 14.0 12 30.5 27 32 MH-GE 18 LR 3/8

18 G3/4A 15 32 38.0 14.5 16 31.0 32 32 MH-GE 18 LR 3/4

22 G3/4A 18 32 40.0 16.5 16 33.0 32 36 MH-GE 22 LR

22 G1/2A 14 27 38.0 16.5 14 33.0 32 36 MH-GE 22 LR 1/2

22 G1A 19 40 43.0 17.5 18 34.0 41 36 MH-GE 22 LR 1

100

28 G1A 23 40 43.0 17.5 18 34.0 41 41 MH-GE 28 LR

28 G3/4A 18 32 41.0 17.5 16 34.0 41 41 MH-GE 28 LR 3/4

28 G1 1/4A 24 50 46.0 18.5 20 35.0 50 41 MH-GE 28 LR 11/4

35 G1 1/4A 30 50 48.0 17.5 20 39.0 50 50 MH-GE 35 LR

35 G1A 23 40 46.0 17.5 18 39.0 46 50 MH-GE 35 LR 1

35 G1 1/2A 30 55 52.0 19.5 22 41.0 55 50 MH-GE 35 LR 11/2

42 G1 1/2A 36 55 52.0 19.0 22 42.0 55 60 MH-GE 42 LR

42 G1A 23 40 48.0 19.0 18 42.0 55 60 MH-GE 42 LR 1

42 G1 1/4A 30 50 50.0 19.0 20 42.0 55 60 MH-GE 42 LR 11/4


Series PN [bar]ØD1

[mm]

T

ØD3

[mm]

ØD4

[mm]

L1

[mm]

L2

[mm]

L3

[mm]

L4

[mm]

S1

[mm]

S2


S

630

6 G1/4A 4 19 32.0 13.0 12 28.0 19 17 MH-GE 06 SR

6 G1/8A 4 14 27.5 12.5 8 27.5 14 17 MH-GE 06 SR 1/8

6 G3/8A 4 22 34.5 15.5 12 30.5 22 17 MH-GE 06 SR 3/8

6 G1/2A 4 27 39.0 18.0 14 33.0 27 17 MH-GE 06 SR 1/2

8 G1/4A 5 19 34.0 15.0 12 30.0 19 19 MH-GE 08 SR

8 G3/8A 5 22 34.5 15.5 12 30.5 22 19 MH-GE 08 SR 3/8

8 G1/2A 5 27 39.0 18.0 14 33.0 27 19 MH-GE 08 SR 1/2

10 G3/8A 7 22 34.5 15.0 12 31.5 22 22 MH-GE 10 SR

10 G1/4A 5 19 34.0 14.5 12 31.0 19 22 MH-GE 10 SR 1/4

10 G1/2A 7 27 39.0 17.5 14 34.0 27 22 MH-GE 10 SR 1/2

12 G3/8A 8 22 36.5 17.0 12 33.5 22 24 MH-GE 12 SR

12 G1/4A 5 19 36.0 16.5 12 33.0 22 24 MH-GE 12 SR 1/4

12 G1/2A 8 27 39.0 17.5 14 34.0 27 24 MH-GE 12 SR 1/2

400

14 G1/2A 10 27 41.0 19.0 14 37.0 27 27 MH-GE 14 SR

14 G3/8A 8 22 38.5 18.5 12 36.5 24 27 MH-GE 14 SR 3/8

14 G3/4A 10 32 45.0 21.0 16 39.0 32 27 MH-GE 14 SR 3/4

16 G1/2A 12 27 41.0 18.5 14 37.0 27 30 MH-GE 16 SR

16 G3/8A 8 22 38.5 18.0 12 36.5 27 30 MH-GE 16 SR 3/8

16 G3/4A 12 32 45.0 20.5 16 39.0 32 30 MH-GE 16 SR 3/4

20 G3/4A 16 32 47.0 20.5 16 42.0 32 36 MH-GE 20 SR

20 G1/2A 12 27 45.0 20.5 14 42.0 32 36 MH-GE 20 SR 1/2

20 G1A 16 40 51.0 22.5 18 44.0 41 36 MH-GE 20 SR 1

20 G1 1/4A 16 50 53.0 22.5 20 44.0 50 36 MH-GE 20 SR 1 1/4

25 G1A 20 40 53.0 23.0 18 47.0 41 46 MH-GE 25 SR

25 G1/2A 12 27 49.0 23.0 14 47.0 41 46 MH-GE 25 SR 1/2

25 G3/4A 16 32 51.0 23.0 16 47.0 41 46 MH-GE 25 SR 3/4

25 G1 1/4A 20 50 55.0 23.0 20 47.0 50 46 MH-GE 25 SR 1 1/4

25 G1 1/2A 20 55 60.0 26.0 22 50.0 55 46 MH-GE 25 SR 1 1/2

250

30 G1 1/4A 25 50 57.0 23.5 20 50.0 50 50 MH-GE 30 SR

30 G1A 20 40 55.0 23.5 18 50.0 46 50 MH-GE 30 SR 1

30 G1 1/2A 25 55 62.0 26.5 22 53.0 55 50 MH-GE 30 SR 1 1/2

38 G1 1/2A 32 55 64.0 26.0 22 57.0 55 60 MH-GE 38 SR

38 G1 1/4A 25 50 62.0 26.0 20 57.0 55 60 MH-GE 38 SR 1 1/4



Guage Adaptor / Manometer Connector

Series PN [bar]ØD1

[mm]T

ØD3

[mm]L1 [mm] L2 [mm] L3 [mm] L4 [mm] L5 [mm] S1 [mm] S2 [mm] Ordering Code*

L 250

6 G1/4 2.5 29 7.5 14.5 4.5 37 19 14 MH-MAV 06 LR

8 G1/4 5.5 29 7.5 14.5 4.5 37 19 17 MH-MAV 08 LR

10 G1/4 5.5 30 8.5 14.5 4.5 38 19 19 MH-MAV 10 LR

12 G1/4 5.5 30 8.5 14.5 4.5 38 19 22 MH-MAV 12 LR

S 630

6 G1/2 3.5 38 11.0 20.0 5.0 46 27 17 MH-MAV 06 SR

8 G1/2 3.5 38 11.0 20.0 5.0 46 27 19 MH-MAV 08 SR

10 G1/2 7.5 38 10.5 20.0 5.0 47 27 22 MH-MAV 10 SR

12 G1/2 7.5 38 10.5 20.0 5.0 47 27 24 MH-MAV 12 SR

Hose Adapter

T1 T2 ØD1 [mm] ØD2 [mm] L [mm] S1 [mm] Odeing Code *

G1/8A G1/8A 4 4 24 14 MH-HA 1/8 x 1/8

G1/4A G1/4A 5 5 32 19 MH-HA 1/4 x 1/4

G3/8A G3/8A 8 8 35 22 MH-HA 3/8 x 3/8

G1/2A G1/2A 11 11 41 27 MH-HA 1/2 x 1/2

G3/4A G3/4A 17 17 45 32 MH-HA 3/4 x 3/4

G1A G1A 22 22 52 41 MH-HA 1 x 1

G1 1/4A G1 1/4A 29 29 61 50 MH-HA 1 1/4 x 1 1/4

G1 1/2A G1 1/2A 33 33 67 55 MH-HA 1 1/2 x 1 1/2

G2A G2A 46 46 76 70 MH-HA 2 x 2

G1/4A G1/8A 5 4 28 19 MH-HA 1/4 x 1/8

G3/8A G1/4A 8 5 33 22 MH-HA 3/8 x 1/4

G1/2A G1/4A 11 5 37 27 MH-HA 1/2 x 1/4

G1/2A G3/8A 11 8 38 27 MH-HA 1/2 x 3/8

G3/4A G1/4A 17 5 39 32 MH-HA 3/4 x 1/4

G3/4A G3/8A 17 8 41 32 MH-HA 3/4 x 3/8

G3/4A G1/2A 17 11 43 32 MH-HA 3/4 x 1/2

G1A G1/2A 22 11 47 41 MH-HA 1 x 1/2

G1A G3/4A 22 17 49 41 MH-HA 1 x 3/4

G1 1/4A G3/4A 29 17 57 50 MH-HA 1 1/4 x 3/4

G1 1/4A G1A 29 22 60 50 MH-HA 1 1/4 x 1

G1 1/2A G3/4A 33 17 57 55 MH-HA 1 1/2 x 3/4

G1 1/2A G1A 33 22 64 55 MH-HA 1 1/2 x 1

G1 1/2A G1 1/4A 33 29 65 55 MH-HA 1 1/2 x 1 1/4

G2A G1 1/2A 46 33 73 70 MH-HA 2 x 1 1/2



Weld Coupling

Series PN [bar] ØD1 [mm] ØD3 [mm] ØD4 [mm] L1 [mm] L2 [mm] L3 [mm] S1 [mm] S2 [mm] Ordering Code*

L

250

6 4 10 21 14.0 29 12 14 MH-AS 06 L

8 6 12 23 16.0 31 14 17 MH-AS 08 L

10 8 14 25 18.0 33 17 19 MH-AS 10 L

12 10 16 25 18.0 33 19 22 MH-AS 12 L

15 12 19 29 22.0 37 22 27 MH-AS 15 L

16018 15 22 31 23.5 40 27 32 MH-AS 18 L

22 19 27 36 28.5 45 32 36 MH-AS 22 L

100

28 24 32 38 30.5 47 41 41 MH-AS 28 L

35 30 40 43 32.5 54 46 50 MH-AS 35 L

42 36 46 46 35.0 58 55 60 MH-AS 42 L

S

630

6 4 11 26 19.0 34 14 17 MH-AS 06 S

8 5 13 28 21.0 36 17 19 MH-AS 08 S

10 7 15 30 22.5 39 19 22 MH-AS 10 S

12 8 17 32 24.5 41 22 24 MH-AS 12 S

400

14 10 19 35 27.0 45 24 27 MH-AS 14 S

16 12 21 35 26.5 45 27 30 MH-AS 16 S

20 16 26 40 29.5 51 32 36 MH-AS 20 S

25 20 31 44 32.0 56 41 46 MH-AS 25 S

25030 25 36 49 35.5 62 46 50 MH-AS 30 S

38 32 44 54 38.0 69 55 60 MH-AS 38 S


Weld Nipple

Series PN [bar] ØD1 [mm] ØD3 [mm] L1 [mm] L3 [mm] Ordering Code*

L/S

237 6 3 31.0 32.0 MH-WN 06 X 1.5

237 8 5 31.0 32.0 MH-WN 08 X 1.5

237 8 4 31.0 32.0 MH-WN 08 X 2

370 10 7 32.5 33.5 MH-WN 10 X 1.5

508 10 6 32.5 33.5 MH-WN 10 X 2

415 12 8 32.5 33.5 MH-WN 12 X 2

532 12 7 32.5 33.5 MH-WN 12 X 2.5

L

409 15 10 34.5 35.5 MH-WN 15 X 2.5

392 18 13 36.0 37.5 MH-WN 18 X 2.5

320 22 17 38.5 40.0 MH-WN 22 X 2.5

252 28 23 41.5 43.0 MH-WN 28 X 2.5

302 28 22 41.5 43.0 MH-WN 28 X 3

242 35 29 47.5 50.0 MH-WN 35 X 3

290 35 28 47.5 50.0 MH-WN 35 X 3.5

322 35 27 47.5 50.0 MH-WN 35 X 4

201 42 36 47.5 50.5 MH-WN 42 X 3

269 42 34 47.5 50.5 MH-WN 42 X 4

S

387 14 8 38.5 40.0 MH-WN 14 X 3

387 16 11 39.0 41.0 MH-WN 16 X 2.5

473 16 10 39.0 41.0 MH-WN 16 X 3

370 20 14 45.0 47.5 MH-WN 20 X 3

390 20 13 45.0 47.5 MH-WN 20 X 3.5

508 20 12 45.0 47.5 MH-WN 20 X 4

289 25 19 49.5 53.5 MH-WN 25 X 3

300 25 18 49.5 53.5 MH-WN 25 X 3.5

397 25 17 49.5 53.5 MH-WN 25 X 4

508 25 15 49.5 53.5 MH-WN 25 X 5

237 30 24 52.0 57.5 MH-WN 30 X 3

325 30 22 52.0 57.5 MH-WN 30 X 4

415 30 20 52.0 57.5 MH-WN 30 X 5

508 30 18 52.0 57.5 MH-WN 30 X 6

200 38 32 56.5 64.5 MH-WN 38 X 3

251 38 30 56.5 64.5 MH-WN 38 X 4

320 38 28 56.5 64.5 MH-WN 38 X 5

391 38 26 56.5 64.5 MH-WN 38 X 6

464 38 24 56.5 64.5 MH-WN 38 X 7


Male Female Reducer

T1 T2 ØD2 [mm] ØD3 [mm] L1 [mm] L2 [mm] L3 [mm] S1 [mm] Type Ordering Code *

G1/8A G1/4 14 4 31.0 8.0 17.0 19 B MH-RI 1/8 X 1/4

G1/8A G3/8 14 4 32.0 8.0 17.0 24 B MH-RI 1/8 X 3/8

G1/4A G1/8 18 5 28.0 12.0 12.0 19 B MH-RI 1/4 X 1/8

G1/4A G3/8 18 5 36.0 12.0 17.0 24 B MH-RI 1/4 X 3/8

G1/4A G1/2 18 5 40.0 12.0 20.0 30 B MH-RI 1/4 X 1/2

G1/4A G3/4 18 5 43.0 12.0 22.0 36 B MH-RI 1/4 X 3/4

G3/8A G1/8 22 22.5 12.0 12.0 22 A MH-RI 3/8 X 1/8

G3/8A G1/4 22 8 36.0 12.0 17.0 22 B MH-RI 3/8 X 1/4

G3/8A G1/2 22 8 41.0 12.0 20.0 30 B MH-RI 3/8 X 1/2

G3/8A G3/4 22 8 44.0 12.0 22.0 36 B MH-RI 3/8 X 3/4

G1/2A G1/8 26 24.0 14.0 12.0 27 A MH-RI 1/2 X 1/8

G1/2A G1/4 26 24.0 14.0 17.0 27 A MH-RI 1/2 X 1/4

G1/2A G3/8 26 12 36.0 14.0 17.0 27 B MH-RI 1/2 X 3/8

G1/2A G3/4 26 12 46.0 14.0 22.0 36 B MH-RI 1/2 X 3/4

G1/2A G1 26 12 49.0 14.0 24.5 41 B MH-RI 1/2 X 1

G1/2A G1 1/4 26 10 53.0 14.0 26.5 55 B MH-RI 1/2 X 1 1/4

G3/4A G1/4 32 26.0 16.0 17.0 32 A MH-RI 3/4 X 1/4

G3/4A G3/8 32 26.0 16.0 17.0 32 A MH-RI 3/4 X 3/8

G3/4A G1/2 32 16 41.0 16.0 20.0 32 B MH-RI 3/4 X 1/2

G3/4A G1 32 16 51.0 16.0 24.5 41 B MH-RI 3/4 X 1

G3/4A G1 1/4 32 16 55 16 26.5 55 B MH-RI 3/4 X 1 1/4

G3/4A G1 1/2 32 16 57 16 28.5 60 B MH-RI 3/4 X 1 1/2

G1A G1/4 39 29 18 17.0 41 A MH-RI 1 X 1/4

G1A G3/8 39 29 18 17.0 41 A MH-RI 1 X 3/8

G1A G1/2 39 29 18 20.0 41 A MH-RI 1 X 1/2

G1A G3/4 39 20 47 18 22.0 41 B MH-RI 1 X 3/4

G1A G1 1/4 39 20 57 18 26.5 55 B MH-RI 1 X 1 1/4

G1A G1 1/2 39 20 59 18 28.5 60 B MH-RI 1 X 1 1/2

G1 1/4A G3/8 49 32 20 17.0 50 A MH-RI 1 1/4 X 3/8

G1 1/4A G1/2 49 32 20 20.0 50 A MH-RI 1 1/4 X 1/2

G1 1/4A G3/4 49 32 20 22.0 50 A MH-RI 1 1/4 X 3/4

G1 1/4A G1 49 25 52 20 24.5 50 B MH-RI 1 1/4 X 1

G1 1/4A G1 1/2 49 25 60 20 28.5 60 B MH-RI 1 1/4 X 1 1/2

G1 1/2A G1/4 55 36 22 17.0 55 A MH-RI 1 1/2 X 1/4

G1 1/2A G3/8 55 36 22 17.0 55 A MH-RI 1 1/2 X 3/8

G1 1/2A G1/2 55 36 22 20.0 55 A MH-RI 1 1/2 X 1/2

G1 1/2A G3/4 55 36 22 22.0 55 A MH-RI 1 1/2 X 3/4

G1 1/2A G1 55 36 22 24.5 55 A MH-RI 1 1/2 X 1

G1 1/2A G1 1/4 55 32 58 22 26.5 55 B MH-RI 1 1/2 X 1 1/4

G2A G1 1/2 68 40 62 24 28.5 70 B MH-RI 2 X 1 1/2

DIN Hose Fittings

Ÿ Often referred to as metric fittings, these fittings seal using

the angled sealing surfaces (metal to metal) or the

combination of metal to metal with O-rings.

Ÿ They are available in very light (LL), light series (L) or heavy

series (S)

Ÿ The sealing face angles are either 24° with or without O-

rings, or 24°/60° universal cones. Identification is made by

measuring the thread size and also the tube OD. Defined by

the OD and the pitch (distance between 2 crests of the

thread) example: M24x1.5 - pitch of 1.5mm

DIN 24° Light (L) and Heavy Series (S) with O-ring

Ÿ The male has a 24° sealing angle cone seat with straight

metric threads. The female has a 24° convex cone with O-

ring and a swivel straight metric threaded nut.

HYDRAULIC HOSE FITTINGS

Tube

ODSpec.

Metric

ThreadØA (mm) ØB (mm) ØC (mm) ØD (mm)

6 6L M12X1.5 10.5 12 7 6.2

6 6S M14X1.5 12.5 14 7 6.2

8 8L M14x1.5 12.5 14 7 8.2

8 8S M16x1.5 14.5 16 7 8.2

10 10L M16x1.5 14.5 16 7 10.2

10 10S M18x1.5 16.5 18 7.5 10.2

12 12L M18x1.5 16.5 18 7 12.2

12 12S M20x1.5 18.5 20 7.5 12.2

14 14S M22x1.5 20.5 22 8 14.2

15 15L M22x1.5 20.5 22 7 15.2

16 16S M24x1.5 22.5 24 8.5 16.2

18 18L M26x1.5 24.5 26 7.5 18.2

20 20S M30x2 27.9 30 10.5 20.2

22 22L M30x2 27.9 30 7.5 22.2

25 25S M36x2 33.9 36 12 25.2

28 28L M36x2 33.9 36 7.5 28.2

30 30S M42x2 39.9 42 13.5 30.2

35 35L M45x2 42.9 45 10.5 35.3

38 38S M52x2 49.9 52 16 38.3

42 42L M52x2 49.9 52 11 42.3


BSPP - British Standard Pipe (BSP)

SizeBSP

ThreadØA (mm) ØB (mm)

-2 1/8-28 8.60 9.70

-4 1/4-19 11.50 13.20

-6 3/8-19 14.90 16.70

-8 1/2-14 18.60 20.90

-10 5/8-14 20.60 22.90

-12 3/4-14 24.10 26.40

-16 1-11 30.30 33.20

-20 1.1/4-11 38.90 41.90

-24 1.1/2-11 44.90 47.80

-32 2-11 56.70 59.60

037

SAE JIC 37°

Commonly referred to as just JIC fittings these metal to metal sealing

type fittings have a 37° flare (sealing surface angle) and straight

United National Fine (UNF) straight threads.

Tube O.D. Tube O.D.

(mm)UNF Thread ØA (mm) ØB (mm)

3/16" - 3/8-24 8.60 9.50

1/4" 6 7/16-20 10.00 11.10

5/16" 8 1/2-20 11.60 12.70

3/8" 10 9/16-18 13.00 14.30

1/2" 12 3/4-16 17.60 19.10

5/8" 14-15-16 7/8-14 20.50 22.20

3/4" 18 & 20 1.1/16-12 24.60 27.00

7/8" 22 1.3/16-12 28.30 30.10

1” 25 1.5/16-12 31.30 33.30

1.1/4" 30 & 32 1.5/8-12 39.20 41.30

1.1/2" 38 1.7/8-12 45.60 47.60

2” - 2.1/2-12 61.50 63.50

BSPT

Fittings seal through the thread interface mechanism. Care should be taken not to

confuse the BSPT fitting with the NPTF male fitting. BSPT has a 55° thread angle. NPTF

has 60° thread angle.

SizeBSP

ThreadØA (mm)

-2 1/8-28 9.73

-4 1/4-19 13.16

-6 3/8-19 16.66

-8 1/2-14 20.96

-12 3/4-14 26.44

-16 1-11 33.25

-20 1.1/4-11 41.91

-24 1.1/2-11 47.80

-32 2-11 59.61


Flange Fittings

The 4-bolt split flange (or full flange) fitting is used

worldwide for connecting high pressure hoses typically to

pumps, motors and cylinders, where the hose assemblies

are subjected to large pressure loadings.

The sealing mechanism is through compression of the O-

ring in the face of the flange head against the surface of the

port/ connection.

Flange Size ØA (mm) ØB (mm) “O” Ring

CODE 61- SAE 3000PSI

1/2" -8 30.18 6.73 18.64x3.53

5/8" -10 34.25 6.73 21.7x3.50

3/4" -12 38.1 6.73 24.99x3.53

1” -16 44.45 8 32.92x3.53

1.1/4" -20 50.8 8 37.69x3.53

1.1/2" -24 60.33 8 47.22x3.53

2” -32 71.42 9.53 56.74x3.53

2.1/2" -40 84.12 9.53 69.44x3.53

3” -48 101.6 9.53 85.32x3.53


1/2" -8 31.75 7.75 18.64x3.53

3/4" -12 41.28 8.76 24.99x3.53

1” -16 47.63 9.53 32.92x3.53

1.1/4" -20 53.98 10.29 37.69x3.53

1.1/2" -24 63.50 12.57 47.22x3.53

2” -32 79.38 12.57 56.74x3.53

CATERPILLAR

3/4" -12 41.28 14.22 25.40x5.00

1” -16 47.63 14.22 31.90x5.00

1.1/4" -20 53.98 14.22 38.20x5.00

1.1/2" -24 63.50 14.22 44.70x5.00

Flange Size ØA (mm) ØB (mm)

“C”

(inch) (metr.)


1/2" -8 38.1 17.5 5/16-18 M8 x 1.25

3/4" -12 47.6 22.3 3/8-16 M10 x 1.5

1” -16 52.4 26.2 3/8-16 M10 x 1.5

1.1/4" -20 58.7 30.2 7/16-14 M10 x 1.5

1.1/2" -24 69.9 35.7 1/2-13 M12 x 1.75

2” -32 77.8 42.8 1/2-13 M12 x 1.75


1/2" -8 40.5 18.2 5/16-18 M8 X 1.25

3/4" -12 50.8 23.8 3/8-16 M10 X 1.5

1” -16 57.2 27.8 7/16-14 M12 X 1.75

1.1/4" -20 66.7 31.8 1/2-13 M12 X 1.75

1.1/2" -24 79.4 36.5 5/8-11 M16 X 2

2” -32 96.8 44.4 3/4-10 M20 X 2.5

4-Bolt Split Flange

Port Dimension


Flange Fittings

Hose I.D. Metric ISO Thread BSP Thread - (T.P.I.)NPT

Thread -

(T.P.I.)

JIC 74°

Thread -

(T.P.I)

ORFS

Thread

Flange Fitting

SAE 3000 PSI SAE 6000 PSI

mm inch Light Series Heavy Series Light Series Heavy Series O.D. x Thickness (mm)

6 1/4" M14x1.5 (8L) M18x1.5 (10S) G 1/4 -19 G 3/8 -19 1/4" - 18 7/16" - 20 9/16" - 18 - -

8 5/16" M16x1.5 (10L) M20x1.5 (12S) G 1/4 -19 G 3/8 -19 - 1/2" - 20 - - -

10 3/8" M18x1.5 (12L) M22x1.5 (14S) G 3/8 -19 G 1/2 -14 3/8" - 18 9/16" - 18 11/16" - 16 - -

12 1/2" M22x1.5 (15L) M24x1.5 (16S) G 1/2 -14 G 1/2 -14 1/2" - 14 3/4" - 16 13/16" - 16 30.18 x 6.73 31.75 x 7.75

16 5/8" M26x1.5 (18L) M30x2 (20S) G 1/2 -14 G 3/4 -14 - 7/8" - 14 1" - 14 - -

20 3/4" M30x2 (22L) M36x2 (25S) G 3/4 -14 G 1 -11 3/4" - 14 1.1/16" - 12 1.3/16"-12 38.10 x 6.73 41.28 x 8.76

25 1” M36x2 (28L) M42x2 (30S) G 1 -11 G 1.1/4 -11 1" - 11.5 1.5/16" - 12 1.7/16" - 12 44.45 x 8.00 47.63 x 9.53

32 1.1/4" M42x2 (35L) M52x2 (38S) G 1.1/4 -11 G 1.1/2 -11 1.1/4" - 11.5 1.5/8" - 12 1.11/16" - 12 50.80 x 8.00 53.98 x 10.29

40 1.1/2" M52x2 (42L) - G 1.1/2 -11 G 1.1/2 -11 1.1/2" - 11.5 1.7/8" - 12 2" - 12 60.33 x 8.00 63.50 x 12.57

50 2” - - G 2 -11 G 2 -11 2" - 11.5 2.1/2" - 12 - 71.42 x 9.53 79.38 x 12.57


Standard Pipe Clamps / Light Series (DIN 3015-1)

These pipe clamps are cost effective and used mostly for general applications, and are supplied as Individual Pipe Clamp with

welding plate, Individual Pipe Clamp without welding plates and Multilayer Construction.

PIPE CLAMPS

Ÿ Designed as per DIN-3015 part-1

Ÿ Sizes ranging from 6 MM O.D. up to 50.8 MM O.D.

Ÿ W.P. range up to 1500 PSI (100 BAR) for application in Steel

/ stainless steel piping system

Features of Standard Series Pipe Clamps

GROUP PIPE OD Dia PL L C T H BOLT SIZE

1

4

43 37 20 3 33 M6x30

6

6.4

8

9.5

10

12

2

12.7

48 42 26 3 39 M6x35

13.5

14

15

16

3

17.2

56 50 33 3 42 M6x40

18

19

20

21.3

22

25

4

26.9

65 59 40 3 48 M6x4528

30

5

32

77 71 52 3 64 M6x60

33.7

35

38

40

42

6

44.5

92 86 66 3 72 M6x7048.3

50.8


2 Clamp Halves (Jaws) - JPCL Single Weld Plate - BP Elongated Weld Plate - EBP

GROUP PIPE OD Dia L1 L2 H S WIDTH L1 L2 L1 L2 L3Mounting

Hole Dia

BP1 EBP1

1

6

37 20 27 0.4 MIN 30 43 20 64 20 50 6.5

6.4

8

9.5

10

12

2

12.7

42 26 33 0.6 MIN 30

BP2 EBP2

13.5

48 26 70 26 56 6.5

14

15

16

17.2

18

3

19

50 33 36 0.6 MIN 30

BP3 EBP3

20

56 33 78 33 64 6.521.3

22

25

4

26.9

59 40 42 0.6 MIN 30

BP4 EBP4

2865 40 87 40 73 6.5

30

5

32

71 52 58 0.8 MIN 30

BP5 EBP5

33.7

77 52 100 52 86 6.5

35

38

40

42

6

44.5

86 66 66 0.8 MIN 30

BP6 EBP6

48.392 66 115 66 100 6.5

50.8

Jaws Material Code

Polypropylene - PP

Poly Amide - PA

Aluminum - AL

Plate Material Code

Steel - No Code

SS316 - SS

Jaws Order Code

Group-Material Code-

Pipe OD-Part Code

Eg: For Jaws

1-PP-06-JPCL Indicates

6MM OD PP Clamp Halves

Standard Series


TWIN WELD PLATE -

TBPTOP PLATE - TP

HEX BOLT -

HBSOCKET HEAD BOLT SB STACKING BOLT - STB

STACKING PLATE -

SP

GROUPPIPE OD

DIAL1 L2 L3 L1 L2

HOLE

DIADIN931/933

DIN 912L1 L2 L3 SW L B2

G X L G X L D S

1

6 TBP1 TP1 HB1 SB1 STB1 SP1

6.4

77 20 37 37 20 7 M6 X 30 M6 X 20 11 0.8 34 20 12 MIN 11 37 11.1

8

9.5

10

12

2

12.7 TBP2 TP2 HB2 SB2 STB2 SP2

13.5

86 26 44 42 26 7 M6 X 35 M6 X 25 11 0.8 40 25 12 MIN 11 42 11.1

14

15

16

17.2

18

3


20

102 33 52 50 33 7 M6 X 40 M6 X 30 11 0.8 44 30 12 MIN 11 50 11.121.3

22

25

4


28120 40 60 59 40 7 M6 X 45 M6 X 35 11 0.8 48 35 12 MIN 11 59 11.1

30

5


33.7

163 52 75 71 52 7 M6 X 60 M6 X 50 11 0.8 64 50 12 MIN 11 71 11.1

35

38

40

42

6


48.3178 66 90 86 66 7 M6 X 70 M6 X 60 11 0.8 73 60 12 MIN 11 86 11.1

50.8


GROUP PIPE OD Dia L C H W PL T BOLT SIZE

1

6

55 33 48 30 70 8 M10 x 45

6.4

8

9.5

10

12

12.7

13.5

14

15

16

17.2

18

2

19

70 64.0 76 30 85 8 M10 x 60

20

21.3

22

25

26.9

28

30

3

30

85 60 76 30 100 8 M10 x 70

33.7

35

38

42

4

42

115 90 117 45 140 10 M12 x 100

48.3

50.8

60.3

63.5

65

5

70

152 122 140 60 180 10 M16 x 13073

76.1

88.9

6

102

206 168 197 80 226 15 M20 x 190114

127

133

7

141

251 205 230 91 270 15 M24 x 225152

168

Heavy Series Pipe (DIN 3015-2)

Tube clamps are Widely used for Supporting Piping System in high pressure applications, and are supplied as Individual Pipe

Clamp with welding plate, Individual Pipe Clamp without welding plates and Multilayer Construction.

Ÿ Designed as per DIN-3015 part-2

Ÿ Sizes ranging from 6 MM O.D. up to 219 MM O.D.

Ÿ W.P. range above 1500 PSI (100 BAR) for application in Steel

/ stainless steel piping system.

Features of Heavy Series Pipe / Tube Clamps


Jaws Material Code

Polypropylene - PP

Poly Amide - PA

Aluminum - AL

Jaws Order Code

Group-Material Code-

Pipe OD-Part Code

Eg: For Jaws

1-PP-06-JPCH Indicates

6MM OD PP Clamp Halves

Heavy Series

GROUP PIPE OD - Dia D1 JAWS - JPCH

MM INCH OD INCH NB L1 L2 H S WIDTH

1

6 1/4"

55 33 32 0.6 MIN 30

6.4

8

9.5

10 3/8"

12

12.7 1/2"

13.5 1/4"

14

15

16

17.2 3/8"

18

2

19 3/4"

70 45 48 0.6 MIN 30

20

21.3 1/2"

22

25 1"

26.9 3/4"

28

30

3

30

85 60 80 0.6 MIN 30

32 1 1/4"

33.7

35

38

42 1 1/4"

4

38 1 1/2"

115 90 89 2 MIN 45

42

48.3 1 1/2"

50.8 2"

55

57

60.3 2"

63.5

65

70

5

70

152 122 120 2 MIN 60

73 2 1/2"

75 3”

76.1

80

88.9 3"

6

102 4"

206 168 167 2 MIN 80

108

114.3 4"

127 5"

133

7

140

6"

5"

251 205 200 3 MIN 91152

168 6"


GROUPBOTTOM PLATE [BPH]

PART NO.DOUBLE BOTTOM PLATE [DBPH]

PART NO.L1 L2 G S B L1 L2 B2 S B

1 70 33 M10 8 30 BPH1 70 33 30.5 8 60 DBPH1

2 85 45 M10 8 30 BPH2 85 45 30.5 8 60 DBPH2

3 100 60 M10 8 30 BPH3 100 60 30.5 8 60 DBPH3

4 140 90 M12 10 45 BPH4 140 90 46 10 90 DBPH4

5 180 122 M16 10 60 BPH5 180 122 61 10 120 DBPH5

6 226 168 M20 15 80 BPH6 226 168 81 15 160 DBPH6

7 270 205 M24 15 91 BPH7 270 205 9 15 180 DBPH7

GROUPELONGATED BOTTOM PLATE [EBPH]

PART NO.TOP PLATE [TPH]

PART NO.L1 L2 L3 S D2 L1 L2 D Dia S B

1 113 33 30.5 8 13 EBPH1 55 33 11 8 30 TPH1

2 125 45 30.5 8 13 EBPH2 70 45 11 8 30 TPH2

3 140 60 30.5 8 16 EBPH3 85 60 11 8 30 TPH3

4 187 90 46 10 21 EBPH4 115 90 14 10 45 TPH4

5 238 122 61 10 26 EBPH5 152 122 18 10 60 TPH5

6 309 168 81 15 31 EBPH6 206 168 22 15 80 TPH6

7 370 205 91 15 31 EBPH7 251 205 26 15 91 TPH7

GROUPSTACKING PLATE PART

NO.

STACKING BOLT PART

NO.

HEX BOLTSOCKET

HEAD BOLT

L1 L2 B1 B2 S G L1 L2 L3 SW G X L G X L

1 56 13 30 15.2 8 SPH1 M10 49 25 15 15 SBH1 M10 X 45 M10 X 30

2 70 32 30 15.2 8 SPH2 M10 65 40 15 15 SBH2 M10 X 60 M10 X 40

3 85 40 30 15.2 8 SPH3 M10 77 51 15 15 SBH3 M10 X 70 M10 X 50

4 116 68 45 17.2 10 SPH4 M12 110 82 18 17 SBH4 M12 X 100 M12 X 80

5 153 96 60 22 10 SPH5 M16 144 110 24 21 SBH5 M16 X 130

6 206 130 80 28 15 SPH6 M20 200 150 30 27 SBH6 M20 X 190

7 251 166 90 31 15 SPH7 M24 240 180 50 30 SBH7 M24 X 220


GROUP PIPE OD Dia PL L C T H BOLT SIZE

1

6

42 36 20 3 27 M6 X 35

6.4

8

9.5

10

12

2

12.7

59 53 29 5 27 M8 X 35

13.5

14

15

16

17.2

18

3

19

74 67 36 5 37 M8 X 45

20

21.3

22

25

4

26.9

86 80 45 5 40 M8 X 5028

30

5

32

112 106 56 5 53 M8 X 60

33.7

35

38

40

42

Twin Series Pipe (DIN 3015-3)

Tube clamps - DIN 3015 Part 3 are Designed to Clamp 2 Identical Pipes / Tubes to the Piping Systems. These pipe / tube clamps

have thick plates & heavy bolts to resist High Pressure Piping Application. These tube clamps can be installed and operated

without any hassle and they provide its users a long working life.

Ÿ Sizes ranging from 6 MM O.D. up to 50.8 MM O.D.

Ÿ Can be availed along with Multilayer, Welding plates, Rail

Nuts, etc.

Ÿ Capable of resisting W.P. up to 3500 psi (300 Bar)

Ÿ Available in different construction type including Rubber

Inlay Types & many more

Features of Twin Series Pipe / Tube Clamp


Multilayer Pipe Clamps (DIN 3015 Part 1, 2 and 3)

Tube clamps For Securing a tool to a multi-piece panel assembly. They can clamp vertically in multiple layers up to any numbers of

layers. Available in Different Sizes, we can provide as per the requirements of our customers.

Ÿ Multilayer Pipe – Tube clamps are specially designed for

light duty / heavy duty as well as twin series clamps

Ÿ Sizes ranging from 6 MM O.D. up to 219 MM O.D.

Features of Multilayer Pipe / Tube Clamps

How to Order

Product Code Product Size Body Material Plate Material

PCL - Pipe Clamp Light / Standard Series

PCH - Pipe Clamp Heavy

PCT - Twin Pipe Clamps

PCV - Vertical Mounted Pipe Clamps

<Number> mm - pipe OD in mm

PP - Polypropylene (Green)

PA - Poly Amide (Black)

SA - Thermoplastic Elastomer (Black)

AL - Aluminum (Natural)

No Code - Mild Steel with Zinc Plating

SS304 - For SS 304 Material

SS304L - For SS 304L Material

SS316 - For SS 316 Material

SS316L - For SS 316L Material

SS316TI - For SS 316TI Material

X - Only Body


Tube Selection and SizingPressure: The Operating pressure of the system is a factor in determining the

material and wal thickness of tube to be used. General recommendations are as

shown below.

Velocity and Flow: The quantity of fluid that must pass through the line in a given

period of time is a major factor in determining the inside diamtere of tubing to be

used.

Pressure Drops: Inside the tubes.

Corrosion Conditions: Proper tubing material and size depend also on corrosion

conditions and various operating requirements of the system.

dia Tube

Ø mmTolerance

wall

thickness

mm

dia Tube

I.D. mm

Design pressure bar

DIN 2413 CASE-I

CASE-II

Burst

Pressure

bar

Weight

Kg./m

*4

± 0.08

0.50 3.00 313 273 1160 0.047

4 0.75 2.50 409 393 1820 0.063

4 1.00 2.00 627 500 2700 0.074

5 ± 0.08 1.00 3.00 501 416 2120 0.099

6

± 0.08

0.75 4.50 333 288 1150 0.103

*6 1.00 4.00 444 372 1650 0.123

*6 1.50 3.00 666 526 2550 0.166

6 2.00 2.00 692 662 3500 0.197

6 2.25 1.50 757 725 3500 0.208

*8

± 0.08

1.00 6.00 333 288 1175 0.173

*8 1.50 5.00 499 412 1925 0.240

8 2.00 4.00 666 526 2500 0.296

8 2.50 3.00 658 630 2650 0.339

*10

± 0.08

1.00 8.00 282 248 900 0.222

*10 1.50 7.00 423 357 1450 0.314

*10 2.00 6.00 564 458 2025 0.395

10 2.50 5.00 705 551 2657 0.462

10 3.00 4.00 666 638 - 0.518

*12

± 0.08

1.00 10.00 235 209 750 0.271

*12 1.50 9.00 353 303 1150 0.388

*12 2.00 8.00 470 391 1600 0.493

12 2.50 7.00 588 474 2025 0.586

12 3.00 6.00 705 551 2600 0.666

12 3.50 5.00 651 624 - 0.734

14

± 0.08

1.00 12.00 201 182 620 0.321

14 1.50 11.00 302 265 940 0.462

14 2.00 10.00 403 343 1340 0.592

14 2.50 9.00 434 417 1760 0.709

14 3.00 8.00 507 487 2400 0.814

14 3.50 7.00 576 553 3220 0.906

14 4.00 6.00 641 313 - 0.986

15

± 0.08

1.00 13.00 188 170 590 0.345

*15 1.50 12.00 282 248 980 0.499

15 2.00 11.00 376 321 1250 0.641

15 2.50 10.00 409 393 1690 0.771

15 3.00 9.00 564 458 2120 0.888

16

± 0.08

1.00 14.00 176 160 575 0.370

16 1.50 13.00 264 233 850 0.536

*16 2.00 12.00 353 303 1175 0.691

*16 2.50 11.00 441 370 1500 0.832

16 3.00 10.00 529 433 1850 0.962

18

± 0.08

1.00 16.00 157 143 450 0.419

*18 1.50 15.00 235 209 700 0.610

*18 2.00 14.00 313 273 975 0.789

18 2.50 13.00 392 333 1300 0.956

18 3.00 12.00 470 391 1575 1.111

Proper Tube Selection Depends on Several Criteria:

dia Tube

Ø mmTolerance

wall

thickness

mm

dia Tube

I.D. mm

Design pressure bar

DIN 2413 CASE-I

CASE-II

Burst

Pressure

bar

Weight

Kg./m

20

± 0.08

1.5 17 212 190 675 0.684

*20 2 16 282 248 900 0.888

*20 2.5 15 353 303 1100 1.079

*20 3 14 423 357 1400 1.258

20 3.5 13 494 408 1650 1.424

20 4 12 564 458 2000 1.578

22

± 0.08

1 20 128 118 550 0.518

*22 1.5 19 192 174 775 0.758

*22 2 18 256 227 1025 0.986

22 2.5 17 320 278 1175 1.202

22 3 16 385 328 - 1.406

25

± 0.08

2 21 226 201 670 1.134

*25 2.5 20 282 248 920 1.387

*25 3 19 338 292 1050 1.628

*25 4 17 394 378 1520 2.072

25 4.5 16 451 418 1780 2.275

25 5 15 508 460 2120 2.466

28

± 0.08

1.5 25 151 138 450 0.980

*28 2 24 201 181 620 1.282

28 2.5 23 252 223 770 1.572

*28 3 22 302 264 920 1.850

28 4 20 403 343 1060 2.368

28 5 18 434 417 1320 2.836

30

± 0.08

2 26 188 170 620 1.381

30 2.5 25 235 209 770 1.695

*30 3 24 282 248 920 1.998

*30 4 22 376 321 1250 2.565

30 5 20 470 391 1580 3.038

35

± 0.15

2 31 161 147 470 1.628

35 2.5 30 201 181 620 2.004

*35 3 29 242 215 720 2.367

35 4 27 322 280 960 3.058

35 5 25 403 343 1060 3.699

35 6 23 419 403 1270 4.291

38

± 0.15

2.5 33 186 168 550 2.189

38 3 32 223 199 660 2.589

*38 4 30 297 260 970 3.354

*38 5 28 371 318 1350 4.069

38 6 26 445 373 1420 4.735

38 7 24 519 427 1490 5.352

42

± 0.2

2 38 134 123 390 1.973

*42 3 36 301 181 580 2.885

42 4 34 269 237 850 3.749

50± 0.2

5 40 297 - 820 5.548

50 6 38 338 - 980 6.511

60± 0.2

3 54 268 - 390 4.216

60 5 50 108 - 616 6.781

GENERAL RECOMMENDATIONS ON SEAMLESS TUBES FOR HYDRAULIC PRESSURE APPLICATIONTolerance acc. to DIN 2391, part 1 / En10305 | Material St. 37.4 / P235TR2 (Fully Aluminium Killed Steel)

MS SEAMLESS TUBES

Ÿ Material characteristic value K = 226 N/mm2 (permanent fatigue strength) Safety correction

value S = 1.5 for static & dynamic stress.

Ÿ Factor C for consideration of wall thickness divergence for static and dynamic stress = 0.8 for

tube o.d. 4 to 5; 0.85 for Tube O.D. 6 to 8; 0.9 for larger Tube o.d.

Ÿ Additional allowances towards other factors like corrosion, thinning of tubes while bending etc.

are not considered for calculation of pressure.

20 K.s.c.

S.daP = (bar)

20 K.s.c.

S. (da + s.c.)P = (bar)

*Std. Manufactured Sizes.

Calculation of pressures: Calculation of pressures given are according to DIN 2413

case I for predominant static stress

2Material characteristic value K = 235 N/mm and

DIN 2413 case III for dynamic stress


BK/+C = (As Drawn) - Cold finished as drawn - No heat

treatment after last cold forming process.

NBK/+N = (Normalized) - Tubes are normalized above the

upper transformation point in controlled atmosphere.

Size Range: OD: 3mm to 75mm

Wall Thickness: 0.5mm to 7.5mm Wall Thickness.

Chemical Properties

Steel

Grade

Material

No

% By Mass

C% Si % Mn % P % S % AI %

max. max. max. max. min.

St30AI 1.0212 0.10 0.05 ≤ 0.55 0.025 0.025 -

St35 1.0308 0.17 0.35 ≥ 0.40 0.025 0.025 -

St37.4 1.0255 0.17 0.35 ≥ 0.35 0.004 0.004 0.020

St45 1.0408 0.21 0.35 ≥ 0.40 0.025 0.025 -

St52 1.0580 0.22 0.55 ≤ 1.60 0.025 0.025 -

E215 1.0212 0.10 0.05 ≤ 0.70 0.025 0.025 0.025

E235 1.0308 0.17 0.35 ≤ 1.20 0.025 0.025 -

E355 1.0580 0.22 0.55 ≤ 1.60 0.025 0.025 -

P235TR2 1.0255 0.16 0.35 ≤ 1.20 0.025 0.020 0.002

P235GH 1.0345 0.16 0.35 ≤ 1.20 0.025 0.020 0.020

P265GH 1.0425 0.20 0.40 ≤ 1.40 0.025 0.020 0.020

Mechanical Properties

As Drawn = BK(+C) Normalized = NBK (+N)

Steel

Grade

Tensile

Strength

Kg./Sq.

mm. (min)

Elongation

at rupture

(% min)

Tensile

Strength

Kg./Sq. mm.

(min)

Upper

yield

point

Kg./Sq.

mm.

(min)

Elongation

at rupture

(% min)

St30AI - - 29.60-42.80 21.90 30.00

St35 - - 35.70-49.00 24.00 25.00

St37.4 49.00 6.00 34.70-47.90 24.00 25.00

St45 59.20 5.00 44.90-58.10 26.00 21.00

St52 65.30 4.00 50.00-64.30 36.02 22.00

E215 43.90 8.00 29.06-43.8 21.09 30.00

E235 48.90 6.00 34.07-48.9 24.00 25.00

E355 65.30 4.00 50.00-64.30 36.20 22.00

P235TR2 - - 36.70-51.00 24.00 25.00

P235GH - - 36.70-51.00 24.00 25.00

P265GH - - 41.80-58.10 27.00 23.00

Specifications:

DIN 2391, DIN 2445, DIN 17175, BS 3059, EN 10305, EN 10216-

2, SAE J 524, IS 3601, IS 3074, AISI 1010, A 179, A 192, A210,

A334 & also other specifications & requirements.

Applications:

Hydraulic Tubing, High pressure Diesel fuel injection tubing,

Tubes for heat exchanger, Tubes for General Engineering

applications.

Product Highlights:

Ÿ Internally & Externally Scale free bright tubes since

annealed / normalized in bright annealing furnace under

controlled / reducing atmosphere.

Ÿ Tubes are manufactured out of fully aluminium killed steel

only to avoid problem of ageing which can lead to

embrittlement & cracks.

Ÿ Surface roughness value Ra below 4:U in tubes as per EN

10305-1.

Ÿ Uniformaly annealed soft tubes, suitable for proper ferrule

biting, flaring, bending etc.

Ÿ Tubes can be supplied with even closer dimensional

tolerance than allowed by various codes subject to prior

agreement.

Ÿ Reliable source of raw material.

Ÿ Reliable quality assurance system.

Ÿ Tubes having internal diameter of 6mm and above can be

supplied in phosphated condition subject to prior

agreement.

Ÿ Product supplied with inspection under leading

consultants and inspection agencies like ABS, LRIS, BV,

DNV, EIL, PDIL, UHDE, Humphrys, IBR, IRS etc.

COMMON STEEL GRADES


MOC Type Specification Chemical Properties Mechanical Properties

Seamless

= S

Welded

= W

Grade C % Mn % P % S % Si % Cr % Cu% Mo % Ni % Va %

Tensil

Strgth

(Mpa)

Yield

Stress

(Mpa)

Elgatn (in

50mm min

Longitudin

al)

Remark

CS S/W ASTM A 53 Gr. A 0.25 max 0.95 max 0.050 max 0.045 max - 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 330 min 205 min - -

CS S/W ASTM A 53 Gr. B 0.30 max 1.20 max 0.050 max 0.045 max - 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 415 min 240 min - -

CS S ASTM A 106 Gr. A 0.25 max 0.27-0.93 0.035 max 0.035 max 0.10 min 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 330 min 205 min - -

CS S ASTM A 106 Gr. B 0.30 max 0.29-1.06 0.035 max 0.035 max 0.10 min 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 415 min 240 min - -

CS S ASTM A 106 Gr. C 0.35 max 0.29-1.06 0.035 max 0.035 max 0.10 min 0.40 max 0.40 max 0.15 max 0.40 max 0.08 max 485 min 275 min - -

CS S ASTM A 179 0.06-0.18 0.27-0.63 0.035 max 0.035 max - - - - - - - - - 72 HRM max

CS S ASTM A 192 0.06-0.18 0.27-0.63 0.035 max 0.035 max 0.25 max - - - - - - - - 72 HRB max

CS S/W Bs3059/1 Gr. 320 0.16 max 0.30-0.70 0.050 max 0.050 max - - - - - - 320 - 480 195 min 25 min -

CS S/W Bs3059/2 Gr. 360 0.17 max 0.40-0.70 0.050 max 0.050 max 0.10-0.35 - - - - - 360 - 500 215 min 24 min -

CS S/W Bs3059/2 Gr. 440 0.12-0.18 0.90-1.20 0.040 max 0.035 max 0.10-0.35 - - - - - 440 - 580 245 min 21 min -

AS S/W Bs3059/2 Gr. 620 0.10-0.15 0.40-0.70 0.040 max 0.040 max 0.10-0.35 0.70-1.10 - 0.45-0.65 - - 460 - 610 180 min 22 min -

CS S/W IS1239 Part 1 0.20 max 1.30 max 0.040 max 0.040 max - - - - - - 320 min - 20 min -

CS S/W IS 3589 Fe 330 0.16 max 1.20 max 0.040 max 0.040 max - - - - - - 330 min 195 min 20 min -

CS S/W IS 3589 Fe 410 0.20 max 1.30 max 0.040 max 0.040 max - - - - - - 410 min 235 min 18 min -

AS S ASTM A 335/P1 0.10-0.20 0.30-0.80 0.025 max 0.025 max 0.10-0.50 - - 0.45-0.65 - - 380 min 205 min 30 min -

AS S ASTM A 335/P2 0.10-0.20 0.30-0.61 0.025 max 0.025 max 0.10-0.30 0.50-0.81 - 0.45-0.65 - - 380 min 205 min 30 min -

AS S ASTM A 335/P5 0.15 max 0.30-0.60 0.025 max 0.025 max 0.50 max 4.00-6.00 - 0.45-0.65 - - 415 min 205 min 30 min -

AS S ASTM A 335/P9 0.15 max 0.30-0.60 0.025 max 0.025 max 0.25-1.00 8.00-10.00 - 0.90-1.10 - - 415 min 205 min 30 min -

AS S ASTM A 335/P11 0.05-0.15 0.30-0.60 0.025 max 0.025 max 0.25-1.00 1.00-1.50 - 0.45-0.65 - - 415 min 205 min 30 min -

AS S ASTM A 335/P12 0.05-0.15 0.30-0.60 0.025 max 0.025 max 0.50 max 0.80-1.25 - 0.45-0.65 - - 415 min 220 min 30 min -

AS S ASTM A 335/P22 0.05-0.15 0.30-0.60 0.025 max 0.025 max 0.50 max 1.90-2.60 - 0.87-1.13 - - 415 min 205 min 30 min -

SS S ASTM A 213 TP 304 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-11 - 515 min 205 min 35 min -

SS S ASTM A 213 TP 304 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-12 - 485 min 170 min 35 min -

SS S ASTM A 213 TP 316 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 10-14 - 515 min 205 min 35 min -

SS S ASTM A 213 TP 316 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 10-14 - 485 min 170 min 35 min -

SS S ASTM A 213 TP 316 TI 0.08 max 2.00 max 0.045 max 0.030 max 0.75 max 16-18 - 2.00-3.00 10-14 - 515 min 205 min 35 minTi:5xC%min-

0.70 max

SS S ASTM A 213 TP 321 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 17-19 - - 9-12 - 415 min 205 min 35 minTi:5xC%min-

0.70 max

SS S ASTM A 213 TP 321 H 0.04-0.10 2.00 max 0.045 max 0.030 max 1.00 max 17-19 - - 9-12 - 515 min 205 min 35 minTi:5xC%min-

0.70 max

SS S/W ASTM A 268 TP 410 0.15 max 1.00 max 0.040 max 0.030 max 0.75 max 11.5-13.5 - - 0.50 max - 415 min 205 min 20 min -

SS S/W ASTM A 269 TP 304 0.08max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-11 - 485 min 170 min 35 minHardness 90

HRB max

SS S/W ASTM A 269 TP 304 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-12 - 485 min 170 min 35 minHardness 90

HRB max

SS S/W ASTM A 269 TP 316 0.08max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 10-14 - 515 min 205 min 35 minHardness 90

HRB max

SS S/W ASTM A 269 TP 316 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 10-15 - 485 min 170 min 35 minHardness 90

HRB max

SS S/W ASTM A 312 TP 304 0.08max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-11 - 515 min 205 min 35 min -

SS S/W ASTM A 312 TP 304 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 18-20 - - 8-13 - 485 min 170 min 35 min -

SS S/W ASTM A 312 TP 316 L 0.08max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 11-14 - 515 min 205 min 35 minWelded pipe

Ni = 10-14

- S/W ASTM A 312 TP 316 L 0.035 max 2.00 max 0.045 max 0.030 max 1.00 max 16-18 - 2.00-3.00 10-14 - 485 min 170 min 35 min -

COMMON GRADES & SPECIFICATIONS FOR TUBES & PIPES


Specifications: ASME & ASTM A 213 / A 268 / A 269 / A312 /

A 789 / A 790 / SB 165/ SB 423/ SB 444 / SB 729 / SB 829 /

EN 10216-5 / EN 10297-2 / DIN 2391

OD: 3.175 mm to 323.90 mm

N.B: 1/8”- 12”

Thickness: 0.5 mm to 15 mm

Length: Up to 30 Meters

Process Features: Bright Annealed / Solution Annealed –

Pickled – Passivated

Surface Finish: Bright / Pickled / Polished (ID & OD)

Seamless

Product Profile

Ÿ IMS (ISO 9001:2015, ISO 14001:2015, ISO 18001:2007)

Certified Company.

Ÿ PED 2014/68/EU & AD 2000 Merkblatt W0/W2/W10

Approved Manufacture.

Ÿ NORSOK Approved Mill, Vd TÜV 418 Certified Duplex Tubes

& Pipes, Vd TÜV 421 Certified 904L / 1.4539 Tubes & Pipes

Ÿ All Products are well approved & used by the end users like

Shell, Exxon Mobil, Petrobras, PetroJet, Reliance, KOC,

Oman Refinery, BASF, Bayer, Covestro, ADMA Group, Zadco,

Technimont, ENI & many more.

Ÿ Multiple Radius Bends in single Tube without any Weld

Joints especially for Cryogenic & Power Applications

Ÿ Best suitable Tubes with Inside Surface Finish Ra < 0.4

Microns for Pharma, Dairy & Food applications.

Austenitic Stainless Steel: 304/304 L, 1.4306, 304 H, 310 S,

316/316 L, 316Ti, 317 L, 321/321 H, 347 H, 904 L, UNS No.

S31254.

Ferritic Steel: 405, 409 & 410.

Duplex Stainless Steel: UNS 31803 (EN 1.4462), UNS 32750

(EN 1.4410), UNS 32760 (EN 1.4501).

Nickel Alloys: UNS N08020, UNS N08028, UNS N04400, UNS

N06600, UNS N06625, UNS N08800, UNS N08825 & UNS

N10276.

Special Grades: EN 1.4835, EN 1.4435, EN 1.4335, UNS No.

S31050, 316L UG, UNS No. S30815

Product Metallurgy & Grades

SS SEAMLESS TUBES


Production

Ÿ Tubes & Pipes With Superior Corrossion Resistance upto

12 MPY in Acc. to ASTM A 262- IGC Pr. B & C, EN ISO 3651

/ 2 Method A,B,C.

Ÿ Diction of Transfer & Longitudinal Imperfections in

Accordance to EN 10246 6 & 7 & as per ASTM E 213 & E

246.

Ÿ ID – Electropolished (Ra 2 up to 0.4u) & OD – Mechanical

Polished up to 800 Grits.

Ÿ In House Testing Facilities – Water Leak (Hydro) Test, Air

Underwater (Pneumatic) Test, Eddy Current Testing,

Ultrasonic Testing, IGC Pr. A & E to Assure & Certify the

right Product Quality in line

Quality & Testing

NDE – Automatic Ultrasonic Test (UT)6.00 mm OD to 355 mm OD – Off line Rota Type Automatic water Immersion

Ultrasonic Testing Machine.

NDE – Manual Ultrasonic Test (UT) 15.88 mm OD to 323 mm OD Upto 15 mm Thickness

NDE – Eddy Current Test (ECT) Upto 76.2 mm OD

NDE – Eddy Current Test (ECT) Upto 76.2 mm OD

Pneumatic Test (Air Under Water) 6 mm OD to 50.8 mm OD Upto max 500 PSI

Hydrostatic Test 3.175 mm OD to 219 mm OD

Ultrasonic Thickness Gauges Upto 15 mm (Digital)

Spectroscope Spectromax

Possitive Material Identification (PMI) Niton

Corrosion Testing Laboratory Glassware to test IGC Pr. A & E aac. ASTM A 262 & EN ISO 3651 / 2

Tensile Flange / Flare / Flattening / Reverse Flattening

Bend TestUTE 40 – FIE Make with (Extenso Meter)

Hardness Test Twin Hardness Tester, RAB-SAROJ make

Micro Structure Analysis & Grain ExaminationPolishing Machine Electro Etching Machine Inverted Metallurgical Microscope

with Optics & CCD Camera

Dimensional Checking Digital Vernier Caliper, Flat & Ball Micrometer etc of Mitutoyo make


Nominal Bore pipe size in Schedule SS Schedule 10S Schedule 40S Schedule 80S

N.B in

inch.

N.B in

mmmm

Wall

Thickness

in mm

Weight

kg/mtr.

Wall

Thickness

in mm

Weight

kg/mtr.

Wall

Thickness

in mm

Weight

kg/mtr.

Wall

Thickness

in mm

Weight

kg/mtr.

1/4" 8 13.72 1.24 0.380 1.65 0.499 2.24 0.644 3.02 0.809

3/8" 10 17.15 1.40 0.544 1.65 0.640 2.31 0.858 3.20 1.118

1/2" 10 21.30 1.65 0.815 2.11 1.016 2.77 1.288 3.74 1.645

3/4" 20 26.70 1.65 1.034 2.11 1.298 2.87 1.710 3.91 2.228

1" 25 33.40 1.65 1.312 2.77 2.125 3.38 2.541 4.55 3.287

1 1/4" 32 42.20 1.65 1.674 2.77 2.732 3.56 3.441 4.85 4.531

1 1/2" 40 48.30 1.65 1.926 2.77 3.155 3.68 4.108 5.08 5.493

2" 50 60.30 1.65 2.424 2.77 3.992 3.91 5.524 5.54 7.601

2 1/2" 65 73.00 2.11 3.747 3.05 5.345 5.16 8.769 7.01 11.589

3" 80 88.90 2.11 4.585 3.05 6.557 5.49 11.466 7.62 15.509

3 1/2" 90 101.60 2.11 5.260 3.05 7.526 5.74 13.778 8.08 18.921

4" 100 114.30 2.11 5.930 3.05 8.496 6.02 16.322 8.56 22.685

5" 125 141.30 2.77 9.610 3.40 11.740 6.55 22.101 9.52 31.444

6" 150 168.30 2.77 11.480 3.40 14.037 7.11 28.694 10.97 43.211

8" 200 219.08 2.77 15.000 3.76 20.290 8.18 43.230 12.70 65.670

10" 250 273.50 3.40 22.950 4.19 28.200 9.27 61.220 12.70 82.780

12" 300 232.90 3.96 31.750 4.57 36.530 9.53 74.990 12.70 98.920

PIPE SELECTION GUIDE AS PER ANSI B36.19 STANDARD

S.W.G. (Standard Wire Gauge) B.W.G. (Birmingham Wire Gauge)

Gurage no. Inch mm Inch mm

8 0.16 4.064 0.165 4.191

10 0.128 3.251 0.134 3.404

12 0.104 2.642 0.109 2.769

14 0.08 2.032 0.083 2.108

16 0.064 1.626 0.065 1.651

18 0.048 1.219 0.049 1.245

19 0.04 1.016 0.042 1.067

20 0.036 0.914 0.035 0.889

22 0.028 0.711 0.028 0.711

TABLE OF GAUGES


CHEMICAL COMPOSITIONS

Grade UNS No. EN No. C Cr Ni Mo Others

Austenitic & Super Austenitic Stainless Steel

304 S30400 1.4301 0.08 18.00 - 20.00 8.00 - 12.00 - -

304 L S30403 1.4307 0.035 18.00 - 20.00 8.00 - 12.00 - -

310 S S31008 1.4845 0.08 24.00 - 26.00 19.00 - 22.00 - -

316 S31600 1.4401 0.08 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 -

316 L S31603 1.4404 0.035 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 -

316 H S31609 - 0.04 - 0.10 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 -

316 Ti S31635 1.4571 0.08 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 Ti:5x(C+N) - 0.7

317 L S31703 1.4438 0.035 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 -

321 S32100 1.4541 0.08 17.00 - 19.00 9.00 - 12.00 - Ti:5x(C+N) - 0.7

347 S34700 1.455 0.08 16.00 - 18.00 10.00 - 14.00 - -

347 H S34709 1.4551 0.04 - 0.10 17.00 - 20.00 9.00 - 13.00 - -

904 L S8904 1.4539 0.02 19.00 - 23.00 23.00 - 28.00 4.00 - 5.00N:0.10 max

Cu : 1.0 - 2.0

Ferritic Stainless Steel

405 S40500 - 0.08 11.50 - 14.50 0.5 - -

409 S40900 - 0.08 10.50 - 11.70 0.5 - -

410 S41000 - 0.15 11.50 - 13.50 - - -

Duplex & Super Duplex Stainless Steel

Alloy 2205 31803 1.4462 0.03 21.00 - 23.00 4.50 - 6.50 2.50 - 3.50 N : 0.08 - 0.20

Alloy 2507 32750 1.441 0.03 24.00 - 26.00 6.00 - 8.00 3.00 - 4.50 N: 0.24 - 0.32

Alloy 32760 32760 1.4501 0.05 24.00 - 26.00 6.00 - 8.00 3.00 - 4.00 N:0.20 - 0.30

Nickel Alloys

Alloy 20 8020 2.446 0.07 19.00 - 21.00 32.00 - 38.00 2.00 - 3.00 Cu : 3.00 - 4.00

Alloy 28 8028 1.4563 0.03 26.00 - 28.00 30.00 - 34.00 3.00 - 4.00 Cu : 0.60 - 1.40

Monel 400 4400 2.436 0.3 - 63.00 Min - Cu: 28.00 - 34.00

Inconel 600 6600 2.4816 0.15 14.00 - 17.00 72.00 Min - Fe: 6.00 - 10.00

Inconel 625 6625 2.4865 0.1 20.00 - 23.00 58.00 Min 8.00 10.00Fe: 5.00 Max

Nb+Ta: 3.15 – 4.15

Inconel 800 8800 - 0.1 19.00 - 23.00 30.00 - 35.00 - Fe: 39.50 Max

Inconel 825 8825 2.4858 0.05 19.50 - 23.50 38.00 - 46.00 2.50 - 3.50 Fe: 22.00 Min

Hastalloy C-276 N 10276 - 0.01 14.50 - 16.50 - 15.00 - 17.00Fe: 5.00 Max

Nb+Ta: 3.15 – 4.15


HYDRAULIC HOSE

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

6 1/4 6,6 10,9 13,0 225 3265 450 900 100 0,19

8 5/16 8,3 12,5 14,7 215 3120 430 860 115 0,22

10 3/8 9,9 14,8 16,8 180 2610 360 720 125 0,28

12 1/2 13,0 17,9 20,0 160 2320 320 640 180 0,36

16 5/8 16,4 21,0 23,2 130 1885 260 520 200 0,44

19 3/4 19,5 25,0 27,1 105 1525 210 420 240 0,56

25 1 26,0 32,9 35,1 88 1275 176 352 300 0,83

31 1-1/4 32,5 39,9 42,5 63 915 150 252 420 1,07

38 1-1/2 38,7 46,5 50,1 50 725 100 200 500 1,42

51 2 51,1 59,9 64,1 40 580 80 160 630 2,01

DIN EN 853 1 SN / SAE 100 R 1S

Tube:

Synthetic rubber, resistant against

hydraulic fluids

Reinforcement:

One braids of high tensile steel wire

Cover:

Abrasion and ozone resistant

synthetic rubber.

Note: Various covers available

Temperature Range (medium):0 0 0-40 C to 100 C (max 120 C

intermittent)

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

6 1/4 6,6 12,4 14,4 400 5800 800 1600 100 0,31

8 5/16 8,3 14,0 16,0 350 5075 700 1400 115 0,37

10 3/8 9,9 16,4 18,4 330 4785 660 1320 125 0,44

12 1/2 13,0 19,4 21,4 275 4000 550 1100 180 0,53

16 5/8 16,4 22,6 24,6 250 3625 500 1000 200 0,66

19 3/4 19,5 26,6 28,6 215 3120 430 830 240 0,84

25 1 26,0 34,5 37,1 165 2395 325 660 300 1,23

31 1-1/4 32,5 43,9 46,1 125 1815 250 500 420 1,77

38 1-1/2 38,7 51,1 54,5 90 1305 180 360 500 2,17

51 2 51,1 62,9 66,7 80 1160 160 320 630 2,79

DIN EN 853 2 SN / SAE 100 R 2S

Tube:


hydraulic fluids

Reinforcement:


Cover:


synthetic rubber.



intermittent)


SEMPERPAC 2 SN-K

Tube:


hydraulic fluids

Reinforcement:


Cover:


synthetic rubber.



intermittent)

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

6 1/4 6,6 11,4 13,4 450 6525 900 1800 45 0,27

8 5/16 8,3 13,0 15,0 420 6090 840 1680 60 0,31

10 3/8 9,9 14,9 17,0 385 5585 770 1540 70 0,39

12 1/2 13,0 18,7 20,7 345 5000 690 1380 90 0,52

16 5/8 16,4 21,6 23,6 290 4205 580 1160 130 0,61

19 3/4 19,5 25,7 27,7 280 4060 560 1120 160 0,79

25 1 26,0 32,9 35,6 200 2900 400 800 210 1,15

31 1-1/4 32,5 40,5 43,5 175 2540 350 700 300 1,57

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

-4 1/4 6,4 12,7 15,0 700 10000 830 1400 100 0,30

-6 3/8 9,5 16,7 19,0 700 10000 830 1400 130 0,50

Tube:


hydraulic fluids (HL, HLP, HLPD, HVLP,

HFA, HFAS, HFB, HFC)

Reinforcement:


Cover:


synthetic rubber.



intermittent)

Standard Branding: Embossed

JACK HOSE

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

25 1 26,0 34,0 36,2 210 3000 420 840 150 1,40

210 SEMPERLOADER

Tube:

High Impulse Hose lower bend radius.

Reduce length changes at working

pressure

Reinforcement:


Cover:


synthetic rubber.

Lining:

Oil resistant synthetic rubber


intermittent)


Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

10 3/8 9.9 17.7 21.0 445 6455 890 1780 180 0.70

12 1/2 13.0 20.6 24.2 425 6465 850 1700 230 0.85

16 5/8 16.0 24.2 27.9 350 5075 700 1400 250 1.11

19 3/4 19.5 28.3 31.9 350 5075 700 1400 300 1.41

25 1 26.0 35.1 39.1 320 4640 640 1280 340 1.86

DIN EN 856 4 SP

Tube:


hydraulic fluids

Reinforcement:

Four high tensile steel wire spiral

layers

Cover:


synthetic rubber - MSHA Approved.



intermittent)

FLEXILINE 5000

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

10 3/8 9,9 17,7 20,2 380 5510 760 1520 65 0,67

12 1/2 13,0 20,6 22,9 380 5510 760 1520 90 0,78

16 5/8 16,4 24,2 26,5 380 5510 760 1520 100 1,03

19 3/4 19,5 27,9 30,5 380 5510 760 1520 120 1,33

25 1 26,0 35,1 37,9 350 5075 700 1400 150 1,94

32 1-1/4 32,5 42,3 45,9 350 5075 700 1400 280 2,55

Tube:

Synthetic, rubber, resistant against

hydraulic fluids (HL, HLP, HVLP, HFA,

HFAS, HFB, HFC)

Reinforcement:

Four spiral layers high tensile steel

wire

Cover:


synthetic rubber, MSHA approved

Note:

MSHA and SemperRock cover

available

Temperature range (medium): 0 0 0 0-40 C to 100 C / -40 F to 250 F

0 0(max 125 C / 257 F intermittent)

FLEXLINE 5000

DIN EN 856 4 SH

Nominal ØInside Ø

mm

Braid Ø

mm

Outside

Ø mm

Working

pressure

Test

pressure

bar

Burst

pressure

bar

Bend

radius

mm

Weight

kg/m

mm inch BAR PSI

19 3/4 19,5 28,3 31,9 430 6235 860 1720 210 1,43

25 1 26,0 35,4 38,7 400 5800 800 1600 220 2,08

31 1-1/4 32,5 42,3 45,2 360 5220 720 1440 240 2,58

38 1-1/2 38,7 49,2 53,4 290 4200 580 1160 560 3,30

51 2 51,1 63,2 67,3 250 3625 500 1000 700 4,94

Tube:


hydraulic fluids

Reinforcement:

Four high tensile steel wire spiral

layers

Cover:


synthetic rubber - MSHA Approved.



intermittent)DN19, DN25 & DN 31: 4SH Premium


DOWTY GEAR PUMPS

Pump TypeNominal

Displacement

Nominal Delivery @ 1500 PRM &

PressureMaximum Countinuous Pressure

Speed at Maximum Continuous

Pressure

0P CC / REV Min (LPM) Max (LPM) PSI BAR Max Min

3003 1.27 1.00 1.90 3000 207 4000 700

3004 1.67 1.60 2.50 3000 207 4000 700

3006 2.2 2.30 3.30 3000 207 4000 700

3008 2.87 3.20 4.30 3000 207 4000 700

3011 3.8 4.50 5.70 3000 207 4000 700

3013 4.47 5.50 6.70 3000 207 4000 700

3015 5.13 6.40 7.70 3000 207 4000 700


3017 6.10 7.80 9.20 3000 207 3500 700

3020 7.00 8.90 10.50 3000 207 3500 700

3028 9.40 12.20 14.20 3000 207 3500 700

3036 11.90 15.70 17.85 3000 207 3500 700

3044 14.30 18.90 21.50 3000 207 3500 700

3052 16.80 22.90 25.20 3000 207 3500 700

3060 19.20 26.50 28.80 3000 207 3500 700

3072 22.80 31.50 34.30 2525 174 3000 700

3090 28.10 38.80 42.20 2000 138 2400 700


3050 16.67 21.80 25.00 3000 207 3000 700

3070 22.73 30.70 34.00 3000 207 3000 700

3090 28.79 39.40 43.20 3000 207 3000 700

3105 33.34 45.80 50.00 3000 207 3000 700

3120 37.88 52.30 56.80 3000 207 3000 700

3146 45.46 63.80 68.20 2525 174 2500 700

3158 49.40 68.90 74.10 2525 174 2500 700

3220 68.80 96.00 103.20 2000 138 2500 700


3150 47.07 65.30 70.60 3000 207 2500 700

3180 56.17 78.20 84.20 3000 207 2500 700

3210 65.23 91.70 97.80 3000 207 2500 700

3250 77.25 109.00 115.70 3000 207 2500 700

3300 92.03 130.60 138.00 2525 174 2500 700

3330 101.71 144.00 152.60 2300 159 2500 700

3380 116.78 166.10 175.20 2000 138 2500 700

3500 153.66 217.90 230.50 1500 100 2500 700

Performance Data0Pressure quoted are relief valve maximum by-pass Performance with SAE 20W oil at 50 C

Hydraulic Hand Pump (with and without tank)

Dowty Seal KitContact us for Special Requirements of Dowty Pumps


POLYHYDRON HYDRAULIC VALVES

Ÿ Radial Piston Pump

Ÿ Prefill Valve

Ÿ Pressure Relief Valve

Ÿ Check Valve

Ÿ Pressure Control

Module

Ÿ Counter Balance

Valve

Ÿ Pilot Operated Check

Valve

Ÿ Direction Control

Valve

Ÿ Pressure Switch


HYDRAULIC ACCESSORIES AND OTHER PRODUCTS

Ÿ Quick Release

Coupling

Ÿ Gauge Isolator

Ÿ Minimess Hose &

Coupling

Ÿ Bell Housing

Coupling

Ÿ Pressure gauge

Ÿ Manifold block

Ÿ Tube bender

Ÿ Hydraulic Pipe

bending machine

Ÿ Flow Control Vale

Ÿ Needle Valve

Ÿ Check Valve

Ÿ Ball Valve

Ÿ Filter, Breather,

Strainer and other

hydraulic accessories


APPLICATIONS IN DIFFERENT SECTORS

Steel Plants & Turnkey

Projects

Hydraulic Systems

& Equipments

Earth Moving Equipments

Injection Moulding

Machines

Oil & Gas Energy

Shipping & Ship Building

MAHAVIR HYDRAULICS PVT. LTD.

6, Ram Apartment, Tambe Nagar, S. N. Road,

Mulund (W), Mumbai - 400 080. Maharashtra, INDIA.

Regd. Office:

Unit no. 34, Nav Nandanvan Industrial Estate, Off. P.K. Road,

Behind SBI Bank, Mulund (W), Mumbai-400080. Maharashtra, INDIA.

Factory Address:

+91 022-2561 88 16 | +91 022-2564 10 87 | +91 022-2568 14 58

www.mhpl.co.in | [email protected]

Contact Details:

Disclaimer :

All Details, Figure, Dimensional or any other details given in catalogue are approx. Company is not responsible for any damage or failure whatsoever

.

MHPL Product Cataloguemhpl.co.in/catalogue/mhpl-full-catalogue.pdf01 Mahavir Hydraulics Private...

Documents

Transcript of MHPL Product Cataloguemhpl.co.in/catalogue/mhpl-full-catalogue.pdf01 Mahavir Hydraulics Private...