MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE … · Specification: MIFAB® Series MH-F1460...

2
PARTS: MH-F1460 Series meets ANSI/ASME floor drain standard A1 12.6.3-2001 F1460-TA-(*) (*) Denotes Strainer Finish (-1, -3 or -4) A2 Body 3/8” (9) MAXIMUM WIDTH DRAINAGE SLOTS 1” (25) THICK, DUCTILE IRON, ADJUSTABLE, TRACTOR GRATE ASSEMBLY (F1460-TA-4) WIDE ANCHOR FLANGE BODY HEIGHT (SEE CHART) STRAINER ADJUSTMENT (SEE CHART) WEEPHOLES FOR DOUBLE DRAINAGE 5 3/4” 400) 1 ( PIPE SIZE (SEE CHART BELOW) Metric equivalents see chart below. (Dimension) Denotes Millimetres A2 DEEP SUMP BODY (15” FLANGE DIAMETER) (Compliant with the 2010 ADA Standards for accessible design, section 302.3) ® MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE TRACTOR GRATE & SIPHONIC TO GRAVITY BREAK AREA DRAIN Page F77 Page No: Contractor: Purchase Order No: Job Name: Section No: Schedule No: Location: USA: 1-800-465-2736 www.mifab.com CAN: 1-800-387-3880 MIFAB reserves the right to make changes in material and design without formal notice and obligation. Specification: MIFAB ® Series MH-F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 16” (406) square, (specify material finish) tractor grate. Siphonic to Gravity Break Area Drain Function: Used in warehouses, mechanical rooms, parking garages and other non-membrane finished areas. 16” square, adjustable tractor grate is used with all types of poured finished floors. CALIFORNIA PROPOSITION 65 WARNING. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 2017-06-15 STRAINER DIAMETER STRAINER ADJUSTMENT ANSI/ASME RATING PIPE SIZE BODY HEIGHT NO HUB (STANDARD) PUSH ON (P) THREADED (T) INSIDE CAULK (X) PVC (-30) / ABS (-31) MIN MAX FREE AREA LOAD RATING 16” x 16” (406 x 406) 2” (51) 4” (102) 80 in² (51,613²) ANSI/ASME LOAD CLASS “SPECIAL DUTY” (OVER 10,000 LBS.) 2” (51) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 1/8” (181) 3” (76) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 3/8” (187) 4” (102) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 3/8” (187) 5” (127) 6” (152) 5 7/16’’ (138) 6 1/4’’ (159) 6” (152) 7 1/4’’ (184) 7” (178) 7’’ (178) 6 1/4’’ (159) Suffix Description -1 Nickel bronze strainer (veneer) -3 Stainless steel strainer (veneer) -4 Ductile iron strainer -5 Sediment bucket -6 Security screws (T-20 Torx & pin) -7 1/2" trap seal primer connection -8 Backwater valve (2", 3", 4") -11 Acid resistant epoxy coated body -12 Galvanized top assembly -13 Galvanized body -15 Extension -20 Secondary dome strainer -21 Secondary flat stainless steel strainer (2", 3", 4") -24 Solid secured cover -28 Stainless steel body (Type 304) -30 PVC socket connection body -31 ABS socket connection body -32 2”, 3”, 4” integral deep seal trap -34 Closure plug -35 Stainless steel mesh over bucket -40 Underdeck clamp -41 Sump receiver -50 Lacquered cast iron funnel -90 Threaded side outlet (2", 3", 4") -90NH No hub side outlet (2", 3", 4") -95 Client logo -BA Buy American Act compliant product -C Membrane clamp -F4 4" Round funnel -F6 6" Round funnel -G Oval 4" x 9" funnel -HP Heel proof grate (1/4" maximum grate opening size, -3 only) -J 6” x 3” x 1” funnel (Standard) No hub outlet -MG MI-GARD Floor Drain Trap Sealer (2”, 3” or 4”) P Push on outlet -PA Pennsylvania Steel Act compliant product T Threaded outlet (2”,3”,4”) X Inside caulk outlet -Y Non-adjustable top -Z Extended wide elastomeric flange

Transcript of MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE … · Specification: MIFAB® Series MH-F1460...

Page 1: MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE … · Specification: MIFAB® Series MH-F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable

PARTS:

MH-F1460 Series meets ANSI/ASME floor

drain standard A112.6.3-2001

F1460-TA-(*)(*) Denotes StrainerFinish (-1, -3 or -4)

A2 Body

3/8” (9) MAXIMUM WIDTHDRAINAGE SLOTS

1” (25) THICK, DUCTILEIRON, ADJUSTABLE,TRACTOR GRATEASSEMBLY (F1460-TA-4)

WIDE ANCHOR FLANGE

BODY HEIGHT(SEE CHART)

STRAINERADJUSTMENT(SEE CHART)

WEEPHOLES FORDOUBLE DRAINAGE

5 3/4” 400)

1 (

PIPE SIZE(SEE CHART BELOW)

Metric equivalents see chart below. (Dimension) Denotes Millimetres

A2 DEEP SUMP BODY(15” FLANGE DIAMETER)

(Compliant with the 2010ADA Standards for accessibledesign, section 302.3)

® MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE TRACTOR

GRATE & SIPHONIC TO GRAVITY BREAK AREA DRAIN

Page F77

Page No:

Contractor:

Purchase Order No:

Job Name:

Section No:

Schedule No:

Location:

USA: 1-800-465-2736 www.mifab.com CAN: 1-800-387-3880MIFAB reserves the right to make changes in material and design without formal notice and obligation.

Specification: MIFAB® Series MH-F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable collar with standard 1” (25) thick, 16” (406) square, (specify material finish) tractor grate.

Siphonic to Gravity Break Area Drain Function: Used in warehouses, mechanical rooms, parking garages and other non-membrane finished areas. 16” square, adjustable tractor grate is used with all types of poured finished floors.

CALIFORNIA PROPOSITION 65 WARNING. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2017-06-15

STRAINERDIAMETER

STRAINERADJUSTMENT ANSI/ASME RATING

PIPE SIZE

BODY HEIGHT

NO HUB (STANDARD) PUSH ON (P) THREADED (T) INSIDE CAULK (X) PVC (-30) / ABS

(-31)MIN MAX FREE AREA LOAD RATING

16” x 16”(406 x 406) 2” (51) 4” (102) 80 in²

(51,613²)

ANSI/ASME LOAD CLASS

“SPECIAL DUTY” (OVER 10,000

LBS.)

2” (51) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 1/8” (181)

3” (76) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 3/8” (187)

4” (102) 6” (152) 6 1/8’’ (156) 5 7/16’’ (138) 6 1/4’’ (159) 7 3/8” (187)

5” (127) 6” (152) — 5 7/16’’ (138) 6 1/4’’ (159) —

6” (152) 7 1/4’’ (184) 7” (178) 7’’ (178) 6 1/4’’ (159) —

Suffix Description-1 Nickel bronze strainer (veneer)-3 Stainless steel strainer (veneer)-4 Ductile iron strainer-5 Sediment bucket-6 Security screws (T-20 Torx & pin)-7 1/2" trap seal primer connection-8 Backwater valve (2", 3", 4")-11 Acid resistant epoxy coated body-12 Galvanized top assembly-13 Galvanized body-15 Extension-20 Secondary dome strainer-21 Secondary flat stainless steel strainer (2", 3", 4")-24 Solid secured cover-28 Stainless steel body (Type 304)-30 PVC socket connection body-31 ABS socket connection body-32 2”, 3”, 4” integral deep seal trap-34 Closure plug-35 Stainless steel mesh over bucket

-40 Underdeck clamp-41 Sump receiver-50 Lacquered cast iron funnel-90 Threaded side outlet (2", 3", 4")-90NH No hub side outlet (2", 3", 4")-95 Client logo-BA Buy American Act compliant product-C Membrane clamp-F4 4" Round funnel-F6 6" Round funnel-G Oval 4" x 9" funnel-HP Heel proof grate (1/4" maximum grate opening size, -3 only)-J 6” x 3” x 1” funnel(Standard) No hub outlet-MG MI-GARD Floor Drain Trap Sealer (2”, 3” or 4”)P Push on outlet-PA Pennsylvania Steel Act compliant productT Threaded outlet (2”,3”,4”)X Inside caulk outlet-Y Non-adjustable top-Z Extended wide elastomeric flange

Page 2: MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE … · Specification: MIFAB® Series MH-F1460 lacquered cast iron deep sump floor drain with anchor flange, weepholes, and adjustable

®

Page F77

Page No:

Contractor:

Purchase Order No:

Job Name:

Section No:

Schedule No:

Location:

USA: 1-800-465-2736 www.mifab.com CAN: 1-800-387-3880MIFAB reserves the right to make changes in material and design without formal notice and obligation.

CALIFORNIA PROPOSITION 65 WARNING. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2017-06-15

MIFAB HYDROMAX VENT ACCESS MH-F1460 AREA DRAIN 2”, 3”, 4”, 5” AND 6”

GRAVITY SIZED DISCHARGE

10 X D

D

Ø15”

12”

REINFORCED CONCRETE AROUND VENT ACCESS (IF IN VEHICULAR TRAFFIC AREA)

PIPE DIAMETER TO BE AT LEAST 70% OF GRAVITY SIZED DISCHARGE

GRADE (ASPHALT)

MH-F1460 FLOOR DRAIN WITH 16” SQUARE ADJUSTABLE TRACTOR GRATE & SIPHONIC TO GRAVITY BREAK AREA DRAIN