MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

11
MFL 2000

Transcript of MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

Page 1: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

MFL 2000

Page 2: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

MFL Corrosion Detection Floor Scanner

MFL 2000

MFL2000

Page 3: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

MFL2000

Page 4: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

The MFL 2000 is a high speed,

motorised magnetic flux leakage

scanner capable of inspecting

approximately 8000 square

feet per shift

MFL2000

Page 5: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

The motorised scanner has an auto-stop system which ensures any defect above the operator adjustablethreshold is identified

MFL2000

Page 6: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

An array of LEDs on the control panel identify the position of defects across the width of the sensor head

MFL2000

Page 7: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

Once a defect is detected, the scanner cannot be driven until the reset button is pressed

MFL2000

Page 8: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

• Easy to use ergonomic design

• Automatic defect detection system

• Minimal maintenance requirements

• High Speed, Cost Effective Inspection

MFL2000

Page 9: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

www.silverwinguk.com

TECHNOLOGY DRIVEN

Page 10: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

www.silverwinguk.com

NOT OPERATOR DEPENDENT

Page 11: MFL 2000. MFL Corrosion Detection Floor Scanner MFL 2000.

www.silverwinguk.com