MEVIS FOR SPORTS · AGV Aprilia Atomic Brooks England Campagnolo Honda HTM Marker Nordica Piaggio...
2
MEVIS FOR SPORTS An example of the way we work A football shoe is subject to torsion and flexion loads. The elastic response of the shoe affects the player’s comfort and so the customer’s goal was to improve product performance. The customer provided load data for the various stages of stress and strain, which we analysed before designing a specific elastic component. Not only did the new component offer increased performance, but it also helped simplify the production process. The design was used to build the first prototypes which were tested not only in thelaboratory but also “in the field”. The positive results we achieved were sufficient to give the go-ahead for subsequent industrialisation and production. We currently make: For ski boots and rollerblades Self-coiling springs Lever springs Torsion springs Small sheared parts for levers For ski bindings Compression springs for bindings Small sheared parts for bindings For sports shoes Torsion springs For trekking poles Compression springs We are currently working with: AGV Aprilia Atomic Brooks England Campagnolo Honda HTM Marker Nordica Piaggio Salomon Selle San marco Tyrolia Vist Tech AGV Aprilia Atomic Brooks England Campagnolo Honda HTM Marker Nordica Piaggio Salomon Selle San marco Tyrolia Vist Tech Quality Manual Since 1986 Certifications: 1994: ISO 9001 1997: AVSQ94/EAQF94/VDA6, QS9000 2000: ISO TS 16949 2014: ISO 14001 mevis.com
Transcript of MEVIS FOR SPORTS · AGV Aprilia Atomic Brooks England Campagnolo Honda HTM Marker Nordica Piaggio...
MEVIS FOR SPORTSAn example of the way we work
A football shoe is subject to torsion and flexion loads. The elastic response of the shoe affects the player’s comfort and so the customer’s goal was to improve product performance.
The customer provided load data for the various stages of stress and strain, which we analysed before designing a specific elastic component. Not only did the new component offer increased performance, but it also helped simplify the production process. The design was used to build the first prototypes which were tested not only in thelaboratory but also “in the field”. The positive results we achieved were sufficientto give the go-ahead for subsequent industrialisation and production.
We currently make:
For ski boots and rollerbladesSelf-coiling springsLever springsTorsion springsSmall sheared parts for leversFor ski bindingsCompression springs for bindingsSmall sheared parts for bindingsFor sports shoesTorsion springsFor trekking polesCompression springs
We are currently working with:
AGVApriliaAtomicBrooks EnglandCampagnoloHondaHTMMarkerNordicaPiaggioSalomonSelle San marcoTyroliaVist Tech AGVApriliaAtomicBrooks EnglandCampagnoloHondaHTMMarkerNordicaPiaggioSalomonSelle San marcoTyroliaVist Tech
Quality Manual Since 1986Certifications:1994: ISO 90011997: AVSQ94/EAQF94/VDA6, QS90002000: ISO TS 169492014: ISO 14001
mevis.com
THE TECHNOLOGIES
1 compression springs2 tension springs3 torsion springs4 flat springs
1
5
9
2
6
10
3
7
11
4
8
12
Research, development and innovation to support every need.
5 rings6 copper coils7 bent wire parts8 wire/pipe parts (supports)
9 small pressed and sheared parts10 plastic overmolded systems11 assembled components12 welded systems
mevis.com
