metronic digital decoderinStrUctionS manUal

Digital Decoder488200

Parental Lock2 Scarts / DiSEqC 1.2

2000 TV and radio channels

Liberty

�

SAFETY INSTRUCTIONS

Please read the safety instructions carefully before using the receiver. Please follow all warnings and instructions on the equipment and in the manual.

! Basic safety instructions !

Electrical connection • Do not expose the receiver to rain or any kind of liquid to avoid risk of electric shock. • Never open the case. • Ensure that the total power consumption of the antenna does not exceed 300 mA “LNB IN”. • Pull the external power pack or the 12 V cable out of the mains socket if you do not intend to use the device for a long period of time. Only pull the external power cable or the head of the 12 V cable out, never the cable itself. • In case of a storm, pull the external power cable or the 12 V cable of the receiver out of the mains socket. • If foreign bodies or fluids enter the receiver, pull the external power cable or the 12 V cable out of the mains socket. Ask a qualified person to check the equipment before operating it again, as there is a risk of electric shock. • Do not bend or crimp any cable. • If a cable used for mains supply is damaged, the receiver must be repaired before reusing it. • Never allow children to play with the antenna unit unless supervised. • Always ask a qualified person to carry out maintenance jobs. Otherwise, you are putting yourself and others at risk. • Disconnect the receiver from the power source in case of operational disruptions. • Ensure that the power source is easily accessible.

Maintenance

• Place the receiver on a stable and even base. • Use the receiver only in normal climatic conditions. • Avoid proximity to:

Heat sources e.g. heaters / flames e.g. candles / Devices with strong magnetic fields e.g. loud-speakers. / You must never leave objects filled with liquid, such as vases, on top of the receiver.

• Avoid direct sunlight and areas with a high amount of dust. • Never cover the ventilation slits. Provide sufficient room for ventilation by maintaining a safety distance of 5 cm between the receiver and other objects. • Do not place any heavy objects on the receiver. • Humidity may settle in the receiver if it is brought into hot surroundings from a cold place. If this hap-pens, you should wait for about an hour before operating the equipment. • Hide all cables so they do not represent a danger to anyone. • The antenna unit is not suitable in case of high wind pressure. Do not expose it to strong wind.

Daily Use

This receiever is DiSEqC 1.2 compatible and can therefore be used with any type of DiSEqC 1.2 motors. There is only one tuner on this receiver, meaning that you cannot record a channel different to the one you are watching.

Correct battery handling

• The remote requires 2 x AAA 1.5V batteries. Batteries may contain toxic agents. Ensure that batteries are not within the reach of children. • Discharged batteries may damage the remote control. If the receiver is not in use for a longperiod of time, remove the batteries from the remote control. • Batteries may contain toxic agents. Therefore, dispose of the batteries immediately in an ecological manner according to the prevailing statutory regulations. Never throw the batteries into normal hou-sehold waste. • Never expose the batteries to open fire or strong heat.• Always replace the batteries by batteries of the same type.

Contents

1- Installation ............................................................................................................page 3

Installing a fixed antenna

Installing a Monobloc LNB for Astra / Hotbird

Connecting the receiver to an antenna (orientated towards a satellite

Connecting the Dual Feed system (2 satellites) Astra 19,2 + HotBird already

Orientated

Activating the DiSEqC 1.2

2- Remote description ..............................................................................................page 8

3- METRONIC receiver description ...........................................................................page 9

4- Daily Use ..............................................................................................................page 9

5- Adding channels ................................................................................................. page 10 Manual search: searching a specific channel

Automatic search: searching a satellite channel

Adding / deleting / modifying a transponder

Searching for a specific channel

Adding a satellite

6- Modifying / organising your channels ................................................................. page 11

7- Additional adjustments ...................................................................................... page 13 Languages

TV Scart

Time

Program to be recorded

Changing the password and locking access to the menu

Re-setting the receiver

8- Using with a VCR ............................................................................................... page 14

9- In case of a problem .......................................................................................... page 14

Multiplexes - channels ..................................................................................page 15

Channels list ................................................................................................page 16

Warranty details ................................................................................................. page 19

Liberty caravan kit contents ..........................................................................page 20

�

Programming the receiver is achieved through the various menus. In order to make this manual easier to understand, please follow the instructions below on how to access the menu as shown below :

Go to MENU / System Set Up / TV System.

This means :

- Press MENU key to access to the main menu.- Use the 34 keys to select System Set Up.- Use the 56 to select TV System. - Press OK to confirm.

�

INSTALLATION

MOUNTING THE ANTENNA

You should mount your antenna facing South and ensure there are no obstructions. The mounting must be stable and vertical.

In case of an obstruction, you should respect the rules of distance (see picture)Details on how to mount the antenna are to be found later in this manual. Mounting and assembling: cautiously swivel the anten-na as the edges are sharp.

NECESSARY ITEMS1- Antenna2- Fixing base3- Offset bracket4- Universal LNB5- Suction disk 6- METRONIC receiver7- PAL / SECAM TV8- Scart cable with 21 pins9- F connector10- Satellite cable

B

A

1

d > H x 1,5

H

d

SUD

1

23

4

510 9

9 68

7

Fig. 1

Fig. 2

�

Fitting the F connector to the satellite cable

The F connector must be on the aluminum part of the satellite cable. CAUTION: The cable must not be in contact with the main unit. Once the instal-lation is over, you should use the METRONIC isolation paste (450000) or a silicone gel to ensure it is protected from any possible humidity.

Mounting the LNB

The LNB must be mounted vertically. See Fig. 2 (the cable exits vertically). DO NOT REMOVE the protection cap.

Pre-programmed Channels and Satellite

The METRONIC receiver is already pre-programmed to receive the main satelli-tes in Europe. Some other satellites require an antenna larger than 1m: even if the satellite appears in the list of pre-programmed channels available, you may not be able to receive these if your antenna is smaller than 1m. You should point your antenna towards the satellite that you wish to receive channels from. In order to have a list of all European satel-lites and the channels received through each of them, please go to HYPERLINK :

http://www.telesatellite.com/gateway.asp?s=www.lyngsat.com|europe.shtml» http://www.telesatellite.com/gateway.asp?s=www.lyngsat.com|europe.shtml.

C

D

E

5 mm 8 mm

Fig. 3

�

B

C

INSTALLING A FIXED ANTENNA FOR A SPECIFIC SATELLITE

Connecting

Connect the LNB (on the arm of the satellite) to the “LNB socket” of the receiver. Connect the TV to the “TV Scart” socket of the receiver. Switch on the TV and connect the receiver to the mains.Press the key on your remote: the receiver should go from stand-by mode to ‘ON’ and the number of channels you can currently receive will be displayed on the screen. If you screen displays the message ‘NO SIGNAL’, ensure that the scart cable is well connected and manually change the AV mode to EXT mode on your TV (please refer to your TV manual).

Orientating your Antenna

Enter the number of the satellite you are interested in receiving channels from using the remote (i.e. HotBird = 339). Press the ‘INFO’ key of the remote to view the signal strength and quality level, which should normally be at 0%: orientating the antenna will allows you to maximise the quality and strength of the signal.

Orientating:

This is an easy procedure if you follow these steps: 1) Double-check the satellite cable connection is correct. 2) Incline the antenna of about 20 degrees. 3) Point your antenna to the SOUTH (use the compass). 4) Gently swivel the antenna from the right to the left. It is normal that nothing appears on the screeen yet. Point the antenna to the SOUTH once more. 5) Raise the antenna of 2 degrees (between 20 to 22 degrees) and GENTLY swivel it from the right to the left.

Continue the process by moving the antenna of 2 degrees at a time in order to try and optimise the signal and view the channels on the screen. If the signal increases but no image is being received, this means that you are pointing towards another satellite. In this case, repeat the procedure.

Procedure to avoid Polarization

Swivel the LNB clockwise of a few degrees on its support to increase the signal level. If the signal decreases, swivel the LNB anti-clockwise. Tighten the screw.

The installation is finished. Press the ‘EXIT’ key once to display the menu. You should now be able to watch all the channels from the satellite your antenna is pointing towards.

A

�

INSTALLING A MONOBLOC LNB FOR ASTRA/HOTBIRD (USING AN ANTENNA LARGER THAN 80CM)

Installing a Monobloc LNB for Astra / HotBird

If the receiver is brand new from the factory and that you have not tried re-setting it yet, there is nothing to modify in order to install the Monobloc LNB. Install the LNB as explained on Fig. 4 and point your antenna towards the HotBird satellite as explained previsouly.

Programming (in case you have modified the menu or are not sure of the steps to follow)

You should modify the menu parametres as follows:- Press MENU/Installation/Antenna Details- Go to Satellite and select ‘HotBird’ using the 34keys.- Go to LNB Type and select Universal using the 34keys.- Ensure that the DiSEqC indicates 1.0.- Ensure that the Commutation Income indicates ½.- Go to Satellite and select Astra 19 using the 34keys.- Go to LNB Type and select Universal using the 34keys.- Ensure that the DiSEqC indicates 1.0.- Ensure that the Commutation Income indicates 2/2.- Press EXIT to leave the menu.

Steps to follow:- Ensure that you are receiving all pre-programmed channels from HotBird and Astra 19.- If necessary, gently swivel the antenna in order to receive channels from both satellites.

CAUTION: Some Monobloc LNBs have reverse functions. It might then be useful to choose 2/2 for HotBird and ½ for Astra.

Installing a Connector

If you are installing 2 or more antennas, you should connect the LNB to a connector in order to only have one cable. Install and orientate each antenna as if it were set up on its own, directly connecting the LNB of each antenna to ‘LNB IN’ socket of the receiver.

Once the antenna has been installed and orientated correctly, modify the programming of the receiver by following the same steps as to install an LNB (see Programming paragraph).

Activating the DiSEqC 1.2 via a motor

If you must install a motorised antenna it is necessary to follow these steps:- Press MENU/Installation/Antenna Details- Go to Commut Input, and select Disable using the 34 keys.- Go to Positionning, and select DiSEqC using the 34 keys.- You can get into the motor details by pressing OK on DiSEqC.- Press EXIT to leave the menu.

10°

A

B

Fig. 4

C

�

CONNECTING A RECEIVER TO AN ANTENNA ALREADY POINTED TOWARDS A SATELLITEUnplug the receiver from the mains and connect it to the LNB (via the ‘LNB IN’ socket). Connect thee TV to the SCART TV socket of the receiver. Switch on the TV and connect the receiver to the mains. Press the ON/OFF key of the remote: the receiver will go from ‘STAND-BY’ mode to ‘ON’ and the satellite number that is currently being received will be displayed. Ensure you follow the ‘Connecting’ paragraph in order to be able to view the channels of the satellite your antenna is poitning towards.

CONNECTING A RECEIVER TO A DUAL FEED SYSTEM (2 SATELLITES) - ASTRA 19,2 AND HOTBIRD WITH AN ANTENNA ALREADY POINTED TOWARDS A SATELLITE

Connect the cables as shown on Fig. 5. To program the receiver, please refer to paragraph A.

CAUTION: Do not touch the connector or antenna. You must only program the receiver.

�

REMOTE DESCRIPTION

Digital keys. In normal use, they will allow you to enter the channel number you wish to view. In programming mode, they will allow you to enter digital values.

ON/OFF key: Set the terminal on or off.

MENU key: allows you to enter or exit the main menu.

3VOL4 keys: Adjust the volume. In the menu, they also allow you to modify various parameters.

3CH4 keys: Change channels. In menus, these allow you to go from one line to another .

OK key: Validate a choice in the menus.

EXIT key: Go back to the previous menu.

EPG key (Electronic Programs Guide): View the program playing at that time and the following one, when this information is transmitted by the channel. Press OK to select a channel or a program you wish to view.

Zoom key: Widen a part of the screen.

LIST key: Dsplay the list of channels of various satellites.

MUTE key: Press this once to stop the sound, and press it again for the sound to come back to normal.

FAV key: Access your favourite channels.

RECALL key: Go back to the channel you were watching previou-sly.

PAUSE key: Pause the screen.

INFO key: Display the information and the technical parametres of the channel you are viewing. You can also view the reception level of the channel.

M/P key: View a channel that has been placed in memory at the same time as the one you are currently viewing.

TV/SAT key: To go from viewing a channel via the receiver to viweing a terrestrial channel. You can therefore watch the terrestrial channels at the same time as recording a satellite one.

TEXT key: Display the digital teletext service, if available.

AUDIO key: Select an alternative audio track and language.

TV/RADIO key: Go from TV mode to Radio mode and back.

TIMER key: Set up a certain time for the TV to switch on or off.

P+ / P- key: Move to the next or previous page.

2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

2

1

3

45

5

6

7

8

9

10

18

11

1213

1415

16

17 20

19

22

21

�

3

4

METRONIC RECEIVER DESCRIPTION

A Display screen 4-digit with clock function B ON / OFF command C 56 keys: change channels D LNB IN input (to connect the receiver to the dish) E IF OUT outlet to connect another receiver F VCR SCART plug to connect to the VCR. When watching a video, the VCR takes over

the receiver. G SCART TV outlet to connect the receiver to the TV. H RS232 connector. I Power socket. J RCA outlet (audio)

DAILY USE

On a daily basis, you should only have to use the following keys: - 3VOL4keys to adjust the sound volume. - 3CH4keys to change channels. - MUTE key to stop the sound. - Digital key to enter a channel number. - EPG key to access the programs guide. - OK key to access the channels list.

AC

B

ED

J

F G H I

�0

ADDING CHANNELS

Manual Search: searching a specific channel

- Press MENU / Installation / TP Scan.- Go to Satellite and press OK to display the list of satellites.- Using the 56 keys select the satellite that emitts the channels you wish to view.

Press OK to confirm.- Go to TP Index, press OK to view the list of the frequencies.- Using the 56 keys select the frequency of the channel you wish to view (if the desired fre-

quency is not diplayed, it will need to be added to the list, as explained in paragraph C).- The Symbol Rate and Polarity functions will be automatically modified (in case this does

not happen it is possible to enter the values manually).- Ensure that the quality and signal intesity levels are superior to 50% (grey bar = no signal:

this means that the frequency or LNB parametres are not correct or that the antenna is not pointing to the right satellite).

- Go to Scan mode and select FREE using the 34keys.

Note : The METRONIC receiver can only receive Free-to-Air channels. Some free channels are however transmitted by paying operators. To access this kind of channels go to Scan and select All.

- Use the 6 key to go to Search and press OK.- The TP Scan window is displayed along with the Find Channel. The screen goes back to

TP Scan. Press EXIT twice to leave the menu.

Automatic Channel Search: searching all channels of one satellite

- Press MENU / Installation / Auto scan. - Go to Satellite and press OK to display the list of satellites. - Using the 56 keys select the satellite that emitts the channels you wish to view to start an automatic search. Press OK to confirm. - Go to Scan mode and select FREE using the 34keys. - Use the 6 key to go to Search and press OK.The Auto Search window is displayed along with the Find Channel. The screen goes back to Auto Search. Press EXIT twice to leave the menu.

Adding / Cancelling / Modifying a transponder

Modifying a transponder: - Press MENU / Installation / TP Scan. - Select the satellite on the first line using the 56keys. - Go to TP List and select the transponder you wish to modify. - Change the value: frequency, rate symbol, polarity etc. - Press EXIT to save the data you have entered.

Cancelling a transponder- Press MENU / Installation / TP Scan.- Select the transponder you wish to cancel using the 56 keys and press the ‘2’ key

of your remote.- Press EXIT to save the data you have entered.

5A

B

C

��

Adding a transponder- Press MENU / Installation / TP Scan.- Go to TP Index and press the ‘1’ key (Add).- Go to TP Frequency and enter the 5-digit frequency.- Go to Symbol Rate (SR) and enter the 5-digit symbol rate.- Select the Polarity (H/V) using the 34keys.- Press EXIT to save the data you have entered and leave the transponders list.

Searching for a specific channel (PID)

This is to be done in case a channel that exists is not found via manual or automatic sear-ch.You must therefore start a specific search by inserting PID. You will find the PID of the channels in special reviews such as Eurosat.- Press MENU / Channel / TV Channel List.- Press the 5 key (= Modify), enter the password (0000) and press the 5 key once more

(= Create).- Go to Satellite and press OK to display the list of satellites. Select the desired satellite by

pressing OK. - Go to TP and press OK to display the list of transpondersand the correct frequency (in case

the frequency does not appear, refer to the paragraph ‘C/ Create a Tranponder), press OK to select the desired transponder.

- Insert the PID audio, PID video and PID PCR values (if you do not know the value of the PCR, enter the same one as the video).

- Save the data by pressing OK. - Press EXIT to leave the menu.

Adding a Satellite

If the satellite that emits the desired channel is not programmed in the receiver, it must be added as follows:

- Press MENU / Installation / Antenna Set Up.- Go to Satellite and press 2 to display the window for adding a satellite.- Press 1 on the remote to name the satellite next to a number: enter the satellite name and

press OK to confirm. - Go to LNB Type, select Universal and ensure the value is the same as the LNB in use. The following values should be used:DiSEqC : DiSEqC 1.0DiSEqC Switch : ½Polarity: H/V- Press EXIT to leave the menu and confirm the data entered by pressing OK. You will then

have to add the necessary transponder as explained in paragraph C.

MODIFYING/ORGANISING YOUR CHANNELS

You can move, cancel, rename or lock a channel (TV or radio).If you lock a channel a password will be requested for security. You can also classify channels based on some criteria. To have access to these options, go to MENU / TV Channel List and select the channel you wish to cancel/ move/ lock/ rename off the TV Channel List and Radio Channel List.Before modifying a channel, you can pre-visualise it by selecting it using the 56 keys.

D

E

6

��

You will then be able to do the following:

Cancelling one or more Channels

- Select the channel you wish to cancel using the 5 CH 6 keys.- Press the 5 key and insert the password (0000).- Press the 1 key: a cross appears next to the selected channel. It is possible to select another

channel.- Once you have selected the channel(s) you wish to cancel, press the EXIT key to confirm

the data and YES to leave the menu.

Cancelling all Channels

- Press the 5 key and insert the password (0000).- Press the 6 key and confirm by pressing OK. - Confirm by pressing YES.

Moving Channels

- Select the channel you wish to move using the 56 keys.- Press the 2 key.- Select the new position for this channel using the 56 keys.- You can do the same for any other channel.- Once you have moved the channel(s) you wish to cancel, press OK.- Press EXIT key to confirm the data and YES to leave the menu.

Moving Channels

- Press the 5 key and insert the password (0000).- Select the channel you wish to rename using the 56keys.- Press the 4 key to display the characteristics of this channel.- Press OK to display an alphanumerical keyboard to enter the new name. - Once you have renamed the channel, press OK to confirm.

Locking a Channel

A locked channel requires a password for security.

- Press the 5 key and select the channel you wish to lock before entering the password. - Press the 3 key and a padlock will appear next to the selected channel. Once you have locked the channel(s), press OK and then YES to confirm.

Some channels, although transmitted in clear, are reserved for adults viewing only. We therefore advise you to lock these.

Classifying Channel

- Press the 4 key.- Select the type of automatic shunting in the channels list. - Press OK to confirm and then EXIT to leave the menu.

Favourite Channels

You can manage 8 lists of Favourite Channels.- Select the channel you wish to place in your Favourites List using the 56keys.- Press the 6 key to display the list of Favourite Channels. - Select the list in which you wish to add the chosen channel and press OK. - Follow the same steps to add any other channels.- Press OK to confirm and leave the menu.

A

B

C

D

E

F

G

��

ADDITIONAL ADJUSTEMENTS

Choosing a Language

To choose the language, go to MENU / System Set Up / Language. - Select the first line and choose the language using the 34keys.- Press the EXIT key various times to leave the menu. Some channels are transmitted in more than one language. You can choose a secondary language.

Adjusting the TV SCART

You can adjust the image that is transmitted to your TV via the TV Scart.- Press MENU / System Set Up / TV System.- The Display mode feature should be on Auto. - Go to Aspect mode and select 4:3 PanScan for a normal screen, 16:9 for a 16:9 screen etc.

Adjusting the time

It is important to adjust the time if you wish to use the timer (in order to record programs).- Press MENU / System Set Up / Time & Timer setting to change the time manually or automati-cally. For the automatic option select Hour and adjust based on GMT time (see GMT Offset).Some channels display an incorrect time. You must then adjust the time manually. - Go to GMT Use and select OFF in order to manually adjust the time and date.

Programming a Recording

You can program the receiver to automatically switch on and off (to record a program for example).- Press MENU / System Set Up / Time & Timer setting. The Timer option allows you to record up to 8 programs. - Go to Timer mode and use the 34 keys select Once to program a one-off recording. You can program weekly, fortnightly, monthly or annually recordings by pressing the key more than once.- Go to Wake up Channel and press OK to display the Channels List. - Select the channel you wish to record and press OK to confirm. - Go to Wake up Date and adjust the date of the program to be recorded. - Go to On Time and select the starting time of the program to record. - Go to Duration and enter the duration of the program to be recorded. - Press MENU to save the data and go back to the main menu.

Changing the Password and Locking Channels / Options

1) To lock a channel, refer to paragraph E in section 6. In order to activate this function, select YES and then go to Lock Channel.

2) To change the password, follow these steps:- Press MENU / System Set Up / Parental Lock.- Enter the existing password (0000).- Go to New Password and enter your 4-digit code. - Enter the 4-digit code once more and go to Confirm Password. The new password is automatically saved. Make sure you remember it!

3) To lock the access to this menu, go to YES and then Lock Menu.

7A

B

C

D

E

��

Re-setting the Receiver (RESET)By re-setting your receiver, all modifications will be lost: it will re-set the original parametres (when the receiver leaves the factory).

CAUTION! All your modifications will be lost (favourite channels etc).

To re-set the receiver:- Press Menu / Tools / Defalut Value.- Enter the passowrd (0000) and wait.

USING WITH A VCR

Simply connect to your VCR via the VCR SCART socket of the receiver. To record satellite programs, you must be viewing the channel you wish to record. To start the recording, go to the AV channel of your VCR (0, AV, EXT etc): refer to your VCR manual.To view a video, simply press PLAY: the VCR has priority over the receiver. If this is not the case, press the TV/VCR key of your VCR remote.

IN CASE OF A PROBLEM

Your screen shows ‘NO SIGNAL’.

The channel that you wish to view does not exist or has changed parametres (frequency etc). Refer to a specialist review magazines (Eurosat for example) to double-check the channel parametres.Your antenna is pointed towwards a satellite with the same frequencies as the ones of the channel you wish to view. The motor is working and the antenna is moving.The antenna is not orintated correctly and therefore no signal is received.

The screen remains black on one or more channels

The channel you wish to view is probably crypted.

The receiver is requesting a [assword to view a channel.

Enter ‘0000’ if the password has not been modified yet. If you have forgotten the password you should re-set the receiver.

F

9

8

��

MULTIPLEXES - CHANNELS

(please check http://www.dtg.org.uk/retailer/dtt_channels.html for channels updates)

MULTIPLEX 1 MULTIPLEX 2 MULTIPLEX A MULTIPLEX B MULTIPLEX C MULTIPLEX D

BBC One ITV 1 Channel 5 BBC Four Sky Three The Hits

BBC Two Channel 4 abc1 Cbeebies UKTV HistoryUKTV Bright

Ideas

BBC Three ITV 2 QVC BBC Parliament E4+1 f tn

CBBC ITV 3 UK GoldThe Community

ChannelSmileTV TMF

BBC News 24 More E4 Bid TV 301 - BBC Sky News Ideal World

BBC i E4 price-drop tv 302 - BBCSky Sports

NewsFilm 4

ITV 4 UK TV Style 303 - BBC Sky Text ITV 2+1

Film 4+1 Eurosport 305 tvtv digital 4TV Interactive

CITV Setanta Sports 1 Xtra BBC talkSPORTBBC World

Service

Teletext Five Us Radio 5 Live Clyde1 Radio The Hits Radio

Teletext Holidays Five LifeBBC Five Live Sports

ExtraPremier Radio Smash Hits!

Teletext CarsTopUpAnytime

1BBC 6 Music Virgin Radio KISS

Teletext on 4TopUpAnytime

2BBC 7 Magic

HeartTopUpAnytime

3BBC Asian Network Q

Radio Music Shop

Thomas Cook TV

Oneword

BBC radio 1 Smooth FM

BBC radio 2 Kerrang!

BBC radio 3

BBC radio 4

Teachers' TV

Television X

heat

MOJO

Depending on the area that you live in in the UK, channels are received via a different channel number. The following information should allow you to manually find any channel.A multiplex is a group of channels. To find out which channels belong to which multiplex, see multiplexes list below :

��

CHANNELS LIST

LO

ND

ON

AN

D S

OU

TH

EA

ST

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Crystal Palace 22 225 128 B29 D32 A34 C

Guildford 41 A44 247 C49 151 B54 D

Reigate 21 224 A27 B31 139 C66 D

Tunbridge Wells

39 C42 A45 B55 159 D61 2

Hemel Hempstead

48 155 259 B60 A62 C65 D

Bluebell Hill 24 227 A39 D42 C45 B59 1

Dover 55 A57 C58 B60 D61 268 1

GR

AM

PIA

N A

ND

TH

E H

IGH

LA

ND

S

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Durris 30 134 241 C44 D51 B52 A

Knock More 30 234 153 A56 D57 B60 C

Rosemarkie 41 A44 B46 C47 150 D51 2

Eitshall 22 A25 B28 C30 232 D34 1

Rumster Forest 22 225 A28 132 B59 D62 C

Keelylang Hill 41 A44 B47 C48 151 D52 2

Bressay 21 124 227 A31 B66 C68 D

EA

ST

AN

GL

IA

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Tacolneston 53 A58 B60 261 C63 164 D

Sudbury 39 B48 A49 150 D54 C

68/56 2Sandy Heath 40 C

42 143 A45 246 D67 B

CE

NT

RA

L S

CO

TL

AN

D A

ND

TA

YS

IDE

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Black Hill 41 144 A47 251 B55 C65 D

Torosay 21 C23 126 229 A31 D33 B

Darvel 22 125 228 B30 C32 A34 D

Rosneath 48 D53 257 A60 B63 C67 1

Craigkelly 23 A26 B29 233 139 D42 C

Angus 56 C59 A62 B65 D66 268 1

��

CHANNELS LIST

NO

RT

H

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Winter Hill 56 160 C63 D66 267 B68 A

Winter Hill B 43 C40 D

Pendle Forest 21 124 227 A30 C31 B34 D

Saddleworth 39 C41 244 A47 151 B56 D

Storeton 23 A26 B29 C30 133 D34 2

Lancaster 22 225 A28 130 D32 B34 C

Emley Moor 40 243 A46 B49 D50 C52 1

Sheffield 39 142 D45 C53 257 A60 B

Chesterfield 34 140 243 A46 B50 C52 D

Keighley 30 C34 D48 153 B66 A68 2

Idle 30 C34 A42 D45 153 256 B

Belmont 30 148 257 D60 C66 B68 A

Olivers Mount 49 154 A58 B61 C64 D67 2

NO

RT

H E

AS

T A

ND

BO

RD

ER

S

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Bilsdale 21 224 B27 C31 A34 142 D

Pontop Pike 48 153 D55 259 A62 B65 C

Fenham 22 225 A28 B30 132 C57 D

Chatton 40 143 A46 B47 C50 251 D

Caldbeck 23 225 126 A39 B42 D45 C

Sandale 67 2Selkirk 53 1

56 D57 260 A63 B66 C

MID

LA

ND

STRANSMITTER

NAMECHANNEL

N°MULTIPLEX

Sutton Coldfield

41 144 247 A51 B52 C55 D

Brierley Hill 56 A59 B62 D65 266 C68 1

Bromsgrove 23 B26 C29 230 D33 A34 1

Malvern 39 241 D44 B47 A51 C52 1

Larkstoke 21 124 A27 B31 257 C60 D

Fenton 22 A25 B28 C30 232 D34 1

The Wrekin A 21 124 A27 B31 253 C57 D

The Wrekin B 39 142 A45 B49 2

Ridge Hill 42 C45 D53 157 260 A63 B

Oxford 29 D34 148 C51 A52 B68 2

Waltham 23 226 A33 B42 D45 C49 1

Nottingham 29 C39 153 A59 D63 B67 2

��

CHANNELS LIST

WA

LE

S A

ND

WE

ST

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Wenvoe 30 134 240 A43 C46 D50 B

Kilvey Hill 21 C22 225 128 A31 D32 B

Aberdare 23 A26 B28 129 C32 233 D

Pontypool 42 A45 B48 252 166 C68 D

Carmel 55 159 A62 B65 266 D68 C

Preseli 39 A42 B45 C47 149 D51 2

Blaenplwyf 22 225 A28 129 C32 B33 D

Llanddona 46 D54 258 A61 B64 C67 1

Moel-y-Parc 30 C34 D54 158 261 A64 B

SO

UT

H W

ES

T

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Mendip 55 256 C59 162 A65 B67 D

Bristol KW 22 125 228 A30 C32 B34 D

Bristol IC 39 241 A44 B47 C49 151 D

Stockland Hill 22 125 A28 230 C32 B34 D

Beacon Hill 52 154 B56 C58 A61 264 D

Huntshaw Cross 53 C54 158 261 A64 B

Huntshaw B 47 D51 C

Caradon Hill 21 B24 C27 D31 234 148 A

Plympton 52 156 D60 B63 C66 A67 2

Redruth 39 142 243 C45 A49 B50 D

SO

UT

H O

F E

NG

LA

ND

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Rowridge 23 126 C30 A32 B33 D28 2

Salisbury 52 D55 156 259 A62 B65 C

Whitehawk Hill 48 B50 255 A58 C61 D66 1

Hannington 40 A41 D43 244 C46 B50 1

Midhurst 56 159 B60 D62 A64 C65 2

Heathfield North

29 234 147 B48 A51 D54 C

Hastings 21 A24 B27 231 160 D63 C

NO

RT

HE

RN

IRE

LA

ND

TRANSMITTER NAME

CHANNELN°

MULTIPLEX

Divis 23 A26 B29 133 234 D48 C

Limavady 53 A57 B58 260 C63 D67 1

Broughe Mountain

23 A26 B29 C30 133 D34 2

��

WARRANTY DETAILS

This product has a 12-month warranty provided by Metronic Ltd.

For further information, please contact us at :

LINK

info@metronic.com

�0

6

4

5

11

5

3

14

13

712

1

17

19

18

2

33

16

30mm

1

1

11

1

1

1

1

1

12

1

2

2

1918

1617

1314

121110

7

56

15

321

45

4

1

10

360° ROTATE360° ROTATE

LIBERTY CARAVANKIT CONTENTS

488200

LNB mounting bracket 40mm LNB bracket holder (lower clamp) 40mm LNB bracket holder (lower clamp) Compass Antenna bracket M8 grip handle screw Arm Suction Disk Fixing for wall or mast Mini antenna End cap M6 U Clamp M6 self-locking screw TC M6 35 hexagonal bolt Grip handle screw M6 locking nut TC M6 20 heagonal bolt

Item N° Item Description Quantity

CAR

WINDOW MAST

CAUTION : Before using the suction disk, please ensure that the surface is smooth and clean.Do not use the suction disk for permanent use.

Product made in Asia.

Metronic Ltd, Regus,Cardinal Point,

Park Road,

Rickmansworth WD3 1RE,UK.

www.metronic.com