METROLOGY SOLUTIONS PROMOTION - Mitutoyo · 2019. 7. 4. · FORM PRODUCTS MITUTOYO PRODUCTIVITY...
Transcript of METROLOGY SOLUTIONS PROMOTION - Mitutoyo · 2019. 7. 4. · FORM PRODUCTS MITUTOYO PRODUCTIVITY...
LIMITED TIME OFFERPrices effective September 25 - December 20, 2017
METROLOGY SOLUTIONS PROMOTION
PLEASE NOTE: Shipping and taxes extra. Installation, calibration and training included - travel related expenses may apply. These offers cannot be combined with any other offers. Promotion packages may not be exactly as illustrated.
FORM PRODUCTS
MITUTOYO PRODUCTIVITY PACK INCLUDED!
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 20172
ROUNDNESS PRODUCTIVITY PACK FORMTRACER PRODUCTIVITY PACK
Code No. Description Code No. Description
64AAB471 Measurlink® Real-Time Professional V8 64AAB471 Measurlink® Real-Time Professional V8
211-032 Centering Chuck 218-003 Rotary Vise
356038 Stage For Small Workpiece 218-011 Micro-stage 4X2”
RA-120P RA-1600 RA-2200AHCompact & easy to use Mid-size compact & complex workpieces Auto Centre/Leveling
SALE $19,887 USD $40,852 USD $69,968 USD
ROUNDNESS TESTERSFor the production line, quality control room or laboratory, Mitutoyo’s wide choice of product offers effective, efficient solutions for all your roundness measurement needs. From compact instruments with dedicated processor and built-in printer, up to the high precision, PC-controlled reference models, there is a Mitutoyo measurement solution for rotationally symmetric workpieces to suit practically every application.
INCLUDES ROUNDNESS PRODUCTIVITY PACK
SV-C3200H4 SV-C-3200H8 SV-C-4500H4 SV-C-4500H8Combination Surface and Contour measuring instrument
Standard Set-up Dual stylus system for upward/downward contour measuring with single set-up
SALE $44,602 USD $48,421 USD $54,402 USD $57,902 USD
FORMTRACERSPrecision surface and contour measurement to the highest quality standards requires enormous technical competence. This applies in particular to the economical combination of both measuring processes into a single system that can be adapted to your requirements. FORMTRACER machines meet the requirements of unlimited capacity for surface and contour measurement – intelligently combined into one space-saving, economical device.
INCLUDES FORMTRACER PRODUCTIVITY PACK
Request formal quotation for full package details and pricing.
Request formal quotation for full package details and pricing. Request formal quotation for full package details and pricing.
$4,600VALUE!
$8,000VALUE!
SV-3200H4Surface Roughness Tester
T SALE $35,548 USD
FORM PRODUCTS
CONTRACERSThe measurement and evaluation of contours is particularly demanding work. As the most versatile supplier of production measuring technology in the world, Mitutoyo sets the standard in know-how and experience – with an intelligently-structured range of sophisticated solutions for modern contour measurement. Here users seeking high performance results will find a tailor-made configuration for the perfect evaluation of profiles in production and in the laboratory.
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017 3
MITUTOYO PRODUCTIVITY PACK INCLUDED!
CONTRACER PRODUCTIVITY PACK SURFTEST PRODUCTIVITY PACK
Code No. Description Code No. Description
64AAB471 Measurlink® Real-Time Professional V8 64AAB471 Measurlink® Real-Time Professional V8
218-003 Rotary Vise 218-003 Rotary Vise
218-011 Micro-stage 4X2” 218-011 Micro-stage 4X2”
SURFTEST
INCLUDES SURFTEST PRODUCTIVITY PACK
Precise surface finish testing requires precision built measuring systems. As the world’s most diversified supplier of production measuring technology, Mitutoyo sets the standard in knowledge and experience in its field. Stationary reference plane measuring system for sophisticatedmeasuring tasks to capture primary, roughness and waviness profiles. The SV-3200 Surftest provides high accuracy, high level analysis and multi-functionality in three dimensional analysis and measurement of fine contour, as well as conventional type surface roughness.
ROUNDNESS TESTERS
FORMTRACERS
CV-3200H4 CV-3200H8 CV-4500H4 CV-4500H8Contour Measuring System
Standard Set-up Dual stylus system for upward/downward contour measuring with a single set-up
SALE $32,425 USD $35,925 USD $42,050 USD $45,550 USD
INCLUDES CONTRACER PRODUCTIVITY PACK
Request formal quotation for full package details and pricing.
Request formal quotation for full package details and pricing.
$8,000VALUE!
$8,000VALUE!
MANUAL & CNC CMM
4
CRYSTA-PLUS M574With Manual MH20i Probe System
SALE $26,500 USD
CRYSTA-APEX S544 CRYSTA-APEX S7106
Manual Probe System (MH20i/TP20)
Motorized Probe System (PH10MQ/TP20)
SALE $46,884 USD $84,766 USD
Motorized Probe System (PH10M/TP20)
Scanning Probe System (PH10MQ/SP25)
SALE $59,990 USD $93,945 USD
From high precision measuring machines, versatile and adaptive software suites - to market leading service and support, Mitutoyo has created a customer experience that will open a new dimension of quality assurance to every user: the world of 3D coordinate measuring technology from Mitutoyo.
Specially designed and constructed for today’s industry requirements, the CNC-controlled CRYSTA-Apex S is the very model of versatility and user-friendliness. With high performance and extensive features, the CRYSTA-Apex S offers far more than conventional machines in its class. It sets a completely new standard for entry into CNC controlled 3D coordinate measuring technology.
PCRYSTA-APEX S CNC CMM
PDell PC system and workstation
PMCOSMOS Level-1 CNC Software
PPH10MQ/TP20 Motorized probe system <<OR>> PH10MQ/SP25 Scanning probe system
PRequired cables and hardware
CNC CMM SYSTEM
PCRYSTA PM574 CMM
PDell PC system, workstation, MCOSMOS Level-1 Manual Software
PMH20i manual probe system
PRequired cables and hardware
MANUAL CMM SYSTEM
INCLUDES MANUAL CMM VALUE ADDED OFFER
INCLUDES CNC CMM VALUE ADDED OFFER
VALUE ADDED OFFER INCLUDED WITH MITUTOYO CMMS
MANUAL CMM VALUE ADDED OFFER CNC CMM VALUE ADDED OFFER
5 Year Mitutoyo factory warranty (Machine only) 2nd Year Extended Warranty & 2 year Calibration Agreement
Measurlink® Real-Time Professional V8
Mitutoyo Eco-Fix® Fixture System
Mitutoyo Starter Stylus Kit
Request formal quotation for full package details and pricing.
Request formal quotation for full package details and pricing.
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017
Manual CMM for an economical entry into the 3D measurement world. For easy, rapid and powerful workshop testing. Includes fine positioning of the probe and automatic element recognition for ease of measurement.
Choose from 3 Levels of software MCOSMOS1
MCOSMOS2
MCOSMOS3
MANUAL/CNC CNC CNC
PART MANAGER Control CentreIs the command centre that boots and manages the software package. Includes: Protocol Designer, Probe Builder, Dialog Designer, User Management, Manager Program (unmanned shift).
GEOPAK Basic GeometryFor easy parts program generation (on-line/off-line) for measuring geometrical elements. Includes: high-speed scanning of control geometries for continuous scanning,contact measuring heads, rotary tables are supported as a fourth axis, user-defined dialog support (variable program creation) and flexible reporting.
CAT1000P PrismaticFor control geometry and uncomplicated parts program generation supported by the CAD model. Includes: Machine Builder, automatic traverse path generation (animated), collision control and simulation of complete parts programs.
CAT1000S 3D Freeform EvaluationFor Surface and Border (Trim Edge) Comparison. A 3D Surface Analysis Function - Level I MCOSMOS that allows tolerance comparisons between measured points and nominal CAD data. Measured results are displayed graphically in “Real-Time” and are colour coded, depending on the deviation, allowing operators to immediately see problem areas.
SCANPAK 2D Profile EvaluationFor the scanning and evaluation of workpiece contours. Includes: Supports single point and continuous scanning measuring heads, rotary tables as fourth axis, variable contour tolerances, best fit, digitized and flexible reporting.
CMM SOFTWARE
5
MICAT PLANNERPAutomatic MCOSMOS part program generation, reduce programming time up to 95%
compared to general purpose softwarePIdentifies Geometric Dimensioning and Tolerancing (GD&T) from 3D models when
included in the Product and Manufacturing Information (PMI)PDefines the measurement plan and automatically creates a measurement program with
integrated path and probe optimization functionPAutomatically selects the shortest measurement path with the fewest probe changes to
measure the part in the least amount of timePThe Rules Editor establishes consistent measurement guidelines to eliminate the variations
that may occur between multiple CMM programmers
MCOSMOS
MEASURLINK®
PCombines real-time data acquisition, on-line statistical analysis, integrated networking and quality information sharing into a comprehensive data management solution
P Measurlink® performs the statistical calculations according to different national standards. A versatile range of statistical charting capability is built in with a powerful data filter engine, allowing reports to be generated for analysis according to your needs. MeasurLink® suite consists of:
REAL-TIME (Data collection)
PROCESS ANALYZER (Analysis of data)
PROCESS MANAGER (Network monitoring dashboard)
GAUGE R&R (Gauge repeatability and reproducibility)
GAUGE MANAGEMENT (Gauge inventory / calibration control)
REPORT SCHEDULER (Create automated reporting tasks that will run on a given schedule)
POther modules also available
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017
MULTI-SENSOR CNC CMM PROBESSURFACE MEASURE PROBE
PHigh accuracy laser line probe (up to 1.8µm)
PHigh speed non-contact measurement
PScanning measurement on various surfaces
PIdeal for inspection, reverse engineering
PIdeal for free-form inspection and reverse engineering
PTurns your CMM into a multi-sensor device
QVP VISION PROBEPProvides image measuring capability for CMM
machines
PAutomatic detection of workpiece edge
PStandard provision of white LED illumination
PMounts on automatic probe changer (ACR3) for full automatic measurement in combination with other probes
SURFTEST PROBE PPerforms surface roughness measurement directly on
the CMM
PProven technology from Mitutoyo
PFive types of detectors to choose from
PHigh accuracy - no CMM movement during measurement
POne CNC measurement cycle produces all results
PGraphical and numerical output
POne measurement report for all GD&T requirements
6
Additional hardware/cables may apply. Request formal quotation for full details and pricing.
403/606/610/1010 606T 201FS
STARTING AT $16,320 USD
Additional hardware/cables may apply. Request formal quotation for full details and pricing.
Additional hardware/cables may apply. Request formal quotation for full details and pricing.
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017
STARTING AT $12,452 USD
STARTING AT $33,604 USD
QVP Probe System only
Surftest Probe System only
Surface Measure Probe System only
QUICK VISION ACTIVE CNC VALUE ADDED OFFER
2nd Year Extended Warranty
2 Year Calibration Agreement
Measurlink® Real-Time Professional V8
Mitutoyo Opti-Fix Starter Fixture Kit
VISION MACHINES
7
P Long focal depth and wide field of view
P Telecentric optical system
P 3 mega-pixel colour CCD camera
P Large quadrant LED ring light
P Single-click measurement execution
P Displays measurement results in window
P Orientation of part is detected automatically
QUICK IMAGE 2D VISION
P Large working distance of 74mm
P 3 white LED light sources
P 4-quadrant fixed white LED ring light
P Great flexibility of magnifications and precision thanks to 8 position zoom options, 1x and 2x optional objective lens
P High definition colour camera
P Powerful and ergonomic QV-PAK software
P Vision/Touch probe combination measurements
QUICK VISION ACTIVE
Quick Vision Active application examples:Motor core. Dimensions of laminated layer and laminated shape of core
Soft oil seal. Control the inside and outside diameter and lip shape
Cable clamp. Use one-click execution to perform automatic collective measurements of multiple parts
Gear. Inspect tool form, positional deviation, pressure angle, pitch diameter, coaxiality
QV ACTIVE 202 QV ACTIVE 404 Standard Packages
SALE $39,990 USD $55,888 USD
Touch Probe Packages
SALE $54,500 USD $69,900 USD
QI-A2010C
SALE $24,900 USD
Request formal quotation for full package details and pricing.
Request formal quotation for full package details and pricing.
VALUE ADDED OFFER INCLUDED WITH MITUTOYO CNC VISION SYSTEM
INCLUDES CNC VISION VALUE ADDED OFFER
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017
8
CUSTOMER SUPPORT• Sales & Application Specialists based in Mississauga,
Windsor, Montréal, Edmonton and Vancouver• Sales Support Group• Technical Support Group• Free lifetime telephone support for all Mitutoyo
products• Product & Software training
EXPERIENCE MITUTOYO M3 SOLUTIONS CENTRESMississauga ON2121 Meadowvale Blvd., Mississauga, ON L5N 5N1Tel. (905) 821-1261
Montréal QC#129-7075 Place Robert-JoncasMontréal, QC H4M 2Z2Tel. (514) 337-5994 Ext. 251
www.mitutoyo.ca | [email protected]
ON-SITE SERVICE• Factory trained on-site service technicians
dispatched from Mississauga, Montréal, and Edmonton ensure maximum uptime
• ISO 17025 Accredited on-site calibration, repairs and training for CMM, Vision Systems and Major Instruments
• Loaner equipment available
IN-HOUSE REPAIR/CALIBRATION SERVICES• ISO 17025 Calibration Lab• In-house Repair facility with factory trained
technicians• Large parts inventory & Free estimates• Quality inspection services
VALUE ADD PROGRAMS & SERVICES• Bronze, Silver or Gold CMM Service Support
Plan• Free in-house Workshops on a variety of
metrology topics• One year warranty on all Mitutoyo products
against defective workmanship or material• Five year warranty on select DRO products• Lifetime telephone support• M3 Solution Centres to assist in product
selection and determine best measurement solutions
SUPPORT SERVICES
METROLOGY SOLUTIONS PROMOTIONSEPT 25 - DEC 20, 2017