Metric Hose

Your right connection

Hydra

ulic

Hose F

ittin

gs

Ferrule No DIN Hose Type SAE Hose Type


Technical Details

The technical specifications for ferrules / hose types quoted in theproduct pages are for Din standard series hose types. Below we givethe relevant cross reference details of these Din specification hose

to SAE standard.

PHN100 Din EN853 / 1SN SAE100R1AT (Non skive)PHN200 Din EN853 / 2SN SAE100R2AT (Non skive)PHD400 Din EN856 / 4SH Superior to SAE100R9RPHF100 Flexible P.T.F.E. Hose Similar to SAE100R14

Note:Ferrules to suit skive SAER1A (skive) and SAER2A (skive) hose

are available.Fittings & Ferrules to suit SAE100R9R and SAE100R12 are available.

Please contact our experienced sales staff for applicable part numbers.

Material:All fitting stems and ferrules are yellow zinc plated.

Swaging Dimensions:Flanges Australia supply approximate swaging dimensions for all

ferrules / stems. Due to variations in manufacture of hose and slightvariations from Din specifications to SAE specifications it is stronglyadvised that you check the dimension on the first swaged end for correct fitment before proceeding to swage entire quantity, paying

attention for possible bore collapse.

PHN 104 4 3 3/16“

PHN 106 6 4 1/4“

PHN 108 8 5 5/16“

PHN 110 10 6 3/8“

PHN 113 13 8 1/2“

PHN 116 16 10 5/8“

PHN 120 20 12 3/4“

PHN 125 25 16 1“

PHN 132 32 20 1“1/4

PHN 140 40 24 1“1/2

PHN 150 50 32 2“

PHN 100Non-skive ferruleNon-skive ferrule for HD 100, material: steel, zinced, yellow passivated

Article category 1100

Designation DN size inch


PHN 204 4 3 3/16“

PHN 206 6 4 1/4“

PHN 208 8 5 5/16“

PHN 210 10 6 3/8“

PHN 213 13 8 1/2“

PHN 216 16 10 5/8“

PHN 220 20 12 3/4“

PHN 225 25 16 1“

PHN 232 32 20 1“1/4

PHN 240 40 24 1“1/2

PHN 250 50 32 2“

PHN 200Non-skive ferruleNon-skive ferrule for HD 200, material: steel, zinced, yellow passivated




PHD 406 06 4 1/4“

PHD 410 10 6 3/8“

PHD 413 12 8 1/2“

PHD 416 16 10 5/8“

PHD 420 19 12 3/4“

PHD 425 25 16 1“

PHD 400Swage ferrulefor HD 400, (EN 856 4SP), material: steel, zinced, yellow passivated





PHF 104 4 3 3/16“

PHF 106 6 4 1/4“

PHF 108 8 5 5/16“

PHF 110 10 6 3/8“

PHF 113 13 8 1/2“

PHF 116 16 10 5/8“

PHF 120 20 12 3/4“

PHF 125 25 16 1“

PHF 100Swage ferrule hose type TF 100Polyflex hose type, material: steel, zinced, yellow passivated



N 04 AOL 4 3 3/16“ M 12x1,5 6 14 4x1,5 10,05

PN 06 AOL 6 4 1/4“ M 14x1,5 8 17 6x1,5 12,05

PN 06 AOL 04 6 4 1/4“ M 12x1,5 6 17 4x1,5 12,05

PN 06 AOL 08 6 4 1/4“ M 16x1,5 10 19 7,5x1,5 14,05

PN 06 AOL 10 6 4 1/4“ M 18x1,5 12 22 9x1,5 16,05

PN 08 AOL 06 8 5 5/16“ M 14x1,5 8 17 6x1,5 12,05

PN 08 AOL 8 5 5/16“ M16x1,5 10 19 7,5x1,5 14,05

PN 08 AOL 10 8 5 5/16“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 10 6 3/8“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 06 10 6 3/8“ M 14x1,5 8 17 6x1,5 12,05

PN 10 AOL 08 10 6 3/8“ M 16x1,5 10 19 7,5x1,5 14,05

PN 10 AOL 13 10 6 3/8“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 13 8 1/2“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 16 13 8 1/2“ M 26x1,5 18 32 15x2 24,05

PN 16 AOL 13 16 10 5/8“ M 22x1,5 15 27 12x2 20,05

PN 16 AOL 16 10 5/8“ M 26x1,5 18 32 15x2 24,05

PN 16 AOL 20 16 10 5/8“ M 30x2 22 36 20x2 27,40

PN 20 AOL 20 12 3/4“ M 30x2 22 36 20x2 27,40

PN 20 AOL 25 20 12 3/4“ M 36x2 28 41 26x2 33,40

PN 25 AOL 25 16 1“ M 36x2 28 41 26x2 33,40

PN 25 AOL 20 25 16 1“ M 30x2 22 36 20x2 27,40

PN 25 AOL 32 25 16 1“ M 45x2 35 50 32x2,5 42,40

-->

SW

T

PN AOLSwage nipplelight series (DKOL), O-ring metric female 24° cone, material: steel, zinced, yellow passivated


Designation DN size inch thread tube-Ø SW O-ring T


<--

PN 32 AOL 32 20 1“1/4 M 45x2 35 50 32x2,5 42,40

PN 32 AOL 25 32 20 1“1/4 M 36x2 28 41 26x2 33,40

PN 32 AOL 40 32 20 1“1/4 M 52x2 42 60 38x2,5 49,40

PN 40 AOL 40 24 1“1/2 M 52x2 42 60 38x2,5 49,40

PN 40 AOL 32 40 24 1“1/2 M 45x2 35 50 32x2,5 42,40

PN 50 AOL 40 50 32 2“ M 52x2 42 60 - 49,40

SW

T


PN AOLSwage nipplelight series (DKOL), O-ring metric female 24° cone, material: steel, zinced, yellow passivated



PN 04 AOL 45 4 3 3/16“ M 12x1,5 6 14 4x1,5 10,05

PN 06 AOL 45 6 4 1/4“ M 14x1,5 8 17 6x1,5 12,05

PN 06 AOL 04 45 6 4 1/4“ M 12x1,5 6 17 4x1,5 10,05

PN 06 AOL 08 45 6 4 1/4“ M 16x1,5 10 19 7,5x1,5 14,05

PN 06 AOL 10 45 6 4 1/4“ M 18x1,5 12 22 9x1,5 16,05

PN 08 AOL 06 45 8 5 5/16“ M 14x1,5 8 17 6x1,5 12,05

PN 08 AOL 45 8 5 5/16“ M 16x1,5 10 19 7,5x1,5 14,05

PN 08 AOL 10 45 8 5 5/16“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 08 45 10 6 3/8“ M 16x1,5 10 19 7,5x1,5 14,05

PN 10 AOL 45 10 6 3/8“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 13 45 10 6 3/8“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 45 13 8 1/2“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 16 45 13 8 1/2“ M 26x1,5 18 32 15x2 24,05

PN 16 AOL 13 45 16 10 5/8“ M 22x1,5 15 27 12x2 20,05

PN 16 AOL 45 16 10 5/8“ M 26x1,5 18 32 15x2 24,05

PN 20 AOL 45 20 12 3/4“ M 30x2 22 36 20x2 27,40

PN 20 AOL 25 45 20 12 3/4“ M 36x2 28 41 26x2 33,40

PN 25 AOL 45 25 16 1 M 36x2 28 41 26x2 33,40

PN 32 AOL 25 45 32 20 1“1/4 M 36x2 28 41 26x2 33,40

PN 32 AOL 45 32 20 1“1/4 M 45x2 35 50 32x2,5 42,40

PN 40 AOL 45 40 24 1“1/2 M 52x2 42 60 38x2,5 49,40

SW

T

PN AOL 45Swage nipple 45°light series (DKOL), O-ring metric female 24° cone, material: steel, zinced, yellow passivated




PN 04 AOL 90 4 3 3/16“ M 12x1,5 6 14 4x1,5 10,05

PN 06 AOL 90 6 4 1/4“ M 14x1,5 8 17 6x1,5 12,05

PN 06 AOL 04 90 6 4 1/4“ M 12x1,5 6 17 4x1,5 10,05

PN 06 AOL 08 90 6 4 1/4“ M 16x1,5 10 19 7,5x1,5 14,05

PN 06 AOL 10 90 6 4 1/4“ M 18x1,5 12 22 9x1,5 16,05

PN 08 AOL 90 8 5 5/16“ M 16x1,5 10 19 7,5x1,5 14,05

PN 08 AOL 06 90 8 5 5/16“ M 14x1,5 8 17 6x1,5 12,05

PN 08 AOL 10 90 8 5 5/16“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 08 90 10 6 3/8“ M 16x1,5 10 19 7,5x1,5 14,05

PN 10 AOL 90 10 6 3/8“ M 18x1,5 12 22 9x1,5 16,05

PN 10 AOL 13 90 10 6 3/8“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 90 13 8 1/2“ M 22x1,5 15 27 12x2 20,05

PN 13 AOL 16 90 13 8 1/2“ M 26x1,5 18 32 15x2 24,05

PN 16 AOL 90 16 10 5/8“ M 26x1,5 18 32 15x2 24,05

PN 16 AOL 13 90 16 10 5/8“ M 22x1,5 15 27 12x2 20,05

PN 16 AOL 20 90 16 10 5/8“ M 30x2 22 36 20x2 27,40

PN 20 AOL 90 20 12 3/4“ M 30x2 22 36 20x2 27,40

PN 20 AOL 16 90 20 12 3/4“ M 26x1,5 18 32 15x2 24,05

PN 20 AOL 25 90 20 12 3/4“ M 36x2 28 41 26x2 33,40

PN 25 AOL 90 25 16 1“ M 36x2 28 41 26x2 33,40

PN 25 AOL 20 90 25 16 1“ M 30x2 22 36 20x2 27,40

PN 25 AOL 32 90 25 16 1“ M 45x2 35 50 32x2,5 42,40

--->

SWT

PN AOL 90Swage nipple 90°light series (DKOL), O-ring metric female 24° cone, material: steel, zinced, yellow passivatedt




<--

PN 32 AOL 90 32 20 1“1/4 M 45x2 35 50 32x2,5 42,40

PN 32 AOL 25 90 32 20 1“1/4 M 36x2 28 41 26x2 33,40

PN 40 AOL 90 40 24 1“1/2 M 52x2 42 60 38x2,5 49,40

PN 40 AOL 32 90 40 24 1“1/2 M 45x2 35 50 32x2,5 42,40

SWT

PN AOL 90Swage nipple 90°light series (DKOL), O-ring metric female 24° cone, material: steel, zinced, yellow passivated




PN 04 AOS 04 3 3/16“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 03 06 4 1/4“ M 14x1,5 6 17 4x1,5 12,05

PN 06 AOS 04 06 4 1/4“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 06 4 1/4“ M 18x1,5 10 22 7,5x1,5 16,05

PN 06 AOS 08 6 4 1/4“ M 20x1,5 12 24 9x1,5 18,05

PN 08 AOS 8 5 5/16“ M 20x1,5 12 24 9x1,5 18,05

PN 08 AOS 06 8 5 5/16“ M 18x1,5 10 22 7,5x1,5 16,05

PN 10 AOS 08 10 06 3/8“ M 20x1,5 12 24 9x1,5 18,05

PN 10 AOS 10 06 3/8“ M 22x1,5 14 27 10x2 20,05

PN 13 AOS 13 8 1/2“ M 24x1,5 16 30 12x2 22,05

PN 13 AOS 16 13 8 1/2“ M 30x2 20 36 16,3x2,4 27,40

PN 16 AOS 13 16 10 5/8“ M 24x1,5 16 30 12x2 22,05

PN 16 AOS 16 10 5/8“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 16 20 12 3/4“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 20 12 3/4“ M 36x2 25 46 20,3x2,4 33,40

PN 25 AOS 20 25 16 1“ M 36x2 25 46 20,3x2,4 33,40

PN 25 AOS 25 16 1“ M 42x2 30 50 25,3x2,4 39,40

PN 32 AOS 25 32 20 1“1/4 M 42x2 30 50 25,3x2,4 39,40

PN 32 AOS 32 20 1“1/4 M 52x2 38 60 33,2x2,4 49,40

SW

T

PN AOSSwage nippleO-ring metric female 24° cone seat, heavy series (DKOS), material: steel, zinced, yellow passivated




PN 04 AOS 45 4 3 3/16“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 04 45 6 4 1/4“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 45 6 4 1/4“ M 18x1,5 10 22 7,5x1,5 16,05

PN 08 AOS 06 45 8 5 5/16“ M 18x1,5 10 22 7,5x1,5 16,05

PN 08 AOS 45 8 5 5/16“ M 20x1,5 12 24 9x1,5 18,05

PN 10 AOS 08 45 10 6 3/8“ M 20x1,5 12 24 9x1,5 18,05

PN 10 AOS 45 10 6 3/8“ M 22x1,5 14 27 10x2 20,05

PN 13 AOS 45 13 8 1/2“ M 24x1,5 16 30 12x2 22,05

PN 16 AOS 13 45 16 10 5/8“ M 24x1,5 16 30 12x2 22,05

PN 16 AOS 45 16 10 5/8“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 16 45 20 12 3/4“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 45 20 12 3/4“ M 36x2 25 46 20,3x2,4 33,40

PN 25 AOS 45 25 16 1“ M 42x2 30 50 25,3x2,4 39,40

PN 32 AOS 45 32 20 1“1/4 M 52x2 38 60 33,2x2,4 49,40

SWT

PN AOS 45Swage nipple 45°O-ring metric female 24° cone seat, heavy series (DKOS), material: steel, zinced, yellow passivated




PN 04 AOS 90 5 3 3/16“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 03 90 6 4 1/4“ M 14x1,5 6 17 4x1,5 12,05

PN 06 AOS 04 90 6 4 1/4“ M 16x1,5 8 19 6x1,5 14,05

PN 06 AOS 90 6 4 1/4“ M 18x1,5 10 22 7,5x1,5 16,05

PN 06 AOS 08 90 6 4 1/4“ M 20x1,5 12 24 9x1,5 18,05

PN 08 AOS 06 90 8 5 5/16“ M 18x1,5 10 22 7,5x1,5 16,05

PN 08 AOS 90 8 5 5/16 M 20x1,5 12 24 9x1,5 18,05

PN 10 AOS 06 90 10 6 3/8“ M 18x1,5 10 22 7,5x1,5 16,05

PN 10 AOS 08 90 10 6 3/8“ M 20x1,5 12 24 9x1,5 18,05

PN 10 AOS 90 10 6 3/8“ M 22x1,5 14 27 10x2 20,05

PN 10 AOS 13 90 10 6 3/8“ M 24x1,5 16 30 12x2 22,05

PN 13 AOS 90 12 8 1/2“ M 24x1,5 16 30 12x2 22,05

PN 16 AOS 13 90 16 10 5/8“ M 24x1,5 16 30 12x2 22,05

PN 16 AOS 90 16 10 5/8“ M 30x2 20 36 16,3x2,4 27,40

PN 16 AOS 90 L 100 16 10 5/8“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 16 90 20 12 3/4“ M 30x2 20 36 16,3x2,4 27,40

PN 20 AOS 90 20 12 3/4“ M 36x2 25 46 20,3x2,4 33,40

PN 25 AOS 20 90 25 16 1“ M 36x2 25 46 20,3x2,4 33,40

PN 25 AOS 90 25 16 1“ M 42x2 30 50 25,3x2,4 39,40

PN 32 AOS 25 90 32 20 1“1/4 M 42x2 30 50 25,3x2,4 39,40

PN 32 AOS 90 32 20 1“1/4 M 52x2 38 60 33,3x2,4 45,40

SWT

PN AOS 90Swage nipple 90°O-ring metric female 24° cone seat, heavy series (DKOS), material: steel, zinced, yellow passivated


Designation DN size inch thread d-F tube-Ø SW O-ring T


PN 04 FL 5 3 3/16“ 6

PN 06 FL 6 4 1/4“ 8

PN 06 FL 04 6 4 1/4“ 6

PN 08 FL 8 5 5/16“ 10

PN 10 FL 10 6 3/8“ 12

PN 10 FL 08 10 6 3/8“ 10

PN 10 FL 13 10 6 3/8“ 15

PN 13 FL 12 8 1/2“ 15

PN 13 FL 10 12 8 1/2“ 12

PN 13 FL 16 12 8 1/2“ 18

PN 16 FL 16 10 5/8“ 18

PN 16 FL 20 16 10 5/8“ 22

PN 20 FL 19 12 3/4“ 22

PN 20 FL 25 19 12 3/4“ 28

PN 25 FL 25 16 1“ 28

PN 32 FL 31 20 1“1/4 35

PN 40 FL 38 24 1“1/2 42

PN FLSwage nipple with standpipelight series, cutting ring connection (BEL), material: steel, zinced, yellow passivated


Designation DN size inch tube


PN 06 FL 04 45 6 4 1/4“ 6

PN 06 FL 45 6 4 1/4“ 8

PN 08 FL 45 8 5 5/16“ 10

PN 10 FL 45 10 6 3/8“ 12

PN 10 FL 08 45 10 6 3/8“ 10

PN 10 FL 13 45 10 6 3/8“ 15

PN 13 FL 45 12 8 1/2“ 15

PN 13 FL 16 45 12 8 1/2“ 18

PN 16 FL 45 16 10 5/8“ 18

PN 20 FL 16 45 19 12 3/4“ 18

PN 20 FL 45 20 12 3/4“ 22

PN 25 FL 45 25 16 1“ 28

PN 32 FL 45 32 20 1“1/4 35

PN 40 FL 45 40 24 1“1/2 42

PN FL 45Swage nipple 45º with standpipelight series, cutting ring connection (BEL), material: steel, zinced, yellow passivated




PN 04 FL 90 5 3 3/16“ 6

PN 06 FL 04 90 6 4 1/4“ 6

PN 06 FL 90 6 4 1/4“ 8

PN 08 FL 90 8 5 5/16“ 10

PN 10 FL 90 10 6 3/8“ 12

PN 10 FL 08 90 10 6 3/8“ 10

PN 10 FL 13 90 10 6 3/8“ 15

PN 13 FL 10 90 12 8 1/2“ 12

PN 13 FL 90 12 8 1/2“ 15

PN 13 FL 16 90 12 8 1/2“ 18

PN 16 FL 90 16 10 5/8“ 18

PN 16 FL 20 90 16 10 5/8“ 22

PN 20 FL 16 90 19 12 3/4“ 18

PN 20 FL 90 19 12 3/4“ 22

PN 25 FL 90 25 16 1“ 28

PN 32 FL 90 31 20 1“1/4 35

PN 40 FL 90 38 24 1“1/2 42

PN FL 90Swage nipple 90ºwith standpipe, light series, cutting ring connection (BEL), material: steel, zinced, yellow passivated




PN 04 FS 5 3 3/16“ 8

PN 06 FS 6 4 1/4“ 10

PN 06 FS 04 6 4 1/4“ 8

PN 06 FS 08 6 4 1/4“ 12

PN 08 FS 8 5 5/16“ 12

PN 10 FS 10 6 3/8“ 14

PN 10 FS 13 10 6 3/8“ 16

PN 13 FS 10 13 8 1/2“ 14

PN 13 FS 13 8 1/2“ 16

PN 13 FS 08 13 8 1/2“ 12

PN 16 FS 13 16 10 5/8“ 16

PN 16 FS 16 10 5/8“ 20

PN 16 FS 20 16 10 5/8“ 25

PN 20 FS 13 20 12 3/4“ 16

PN 20 FS 16 20 12 3/4“ 20

PN 20 FS 20 12 3/4“ 25

PN 25 FS 25 16 1“ 30

PN 25 FS 20 25 16 1“ 25

PN 25 FS 32 25 16 1“ 38

PN 32 FS 25 32 20 1“1/4 30

PN 32 FS 32 20 1“1/4 38

PN 40 FS 32 40 24 1“1/2 38

PN FSSwage nipplestandpipes, heavy series (BES), cutting ring connectionmaterial: steel, zinced, yellow passivated

Designation DN size inch tube-Ø


PN 06 FS 45 6 4 1/4“ 10

PN 08 FS 45 8 5 5/16“ 12

PN 10 FS 45 10 6 3/8“ 14

PN 13 FS 10 45 13 8 1/2“ 14

PN 13 FS 45 13 8 1/2“ 16

PN 16 FS 45 16 10 5/8“ 20

PN 20 FS 16 45 20 12 3/4“ 20

PN 20 FS 45 20 12 3/4“ 25

PN 25 FS 45 25 16 1“ 30

PN 32 FS 45 32 20 1“1/4 38

PN FS 45Swage nipple 45°Standpipe, heavy series (BES), cutting ring connection, material: steel, zinced, yellow passivated




PN 06 FS 90 6 4 1/4“ 10

PN 06 FS 08 90 6 4 1/4“ 12

PN 08 FS 90 8 5 5/16“ 12

PN 10 FS 90 10 6 3/8“ 14

PN 13 FS 08 90 13 8 1/2“ 12

PN 13 FS 10 90 13 8 1/2“ 14

PN 13 FS 90 13 8 1/2“ 16

PN 16 FS 90 16 10 5/8“ 20

PN 16 FS 13 90 16 10 5/8“ 16

PN 20 FS 16 90 20 12 3/4“ 20

PN 20 FS 90 20 12 3/4“ 25

PN 25 FS 20 90 25 16 1“ 25

PN 25 FS 90 25 26 1“ 30

PN 32 FS 90 32 20 1“1/4 38

PN FS 90Swage nipple 90°Standpipe, heavy series (BES), cutting ring connection, material: steel, zinced, yellow passivated




PN 04 HL 4 3 3/16“ M 12x1,5 6 14 12,00

PN 06 HL 04 6 4 1/4“ M 12x1,5 6 14 12,00

PN 06 HL 6 4 1/4“ M 14x1,5 8 17 14,00

PN 06 HL 08 6 4 1/4“ M 16x1,5 10 17 16,00

PN 06 HL 10 6 4 1/4“ M 18x1,5 12 19 18,00

PN 08 HL 8 5 5/16“ M 16x1,5 10 17 16,00

PN 08 HL 10 8 5 5/16“ M 18x1,5 12 19 18,00

PN 10 HL 10 6 7/8“ M 18x1,5 12 19 18,00

PN 10 HL 08 10 6 3/8“ M 16x1,5 10 17 16,00

PN 10 HL 13 10 6 3/8“ M 22x1,5 15 22 22,00

PN 13 HL 10 13 8 1/2“ M 18x1,5 12 19 18,00

PN 13 HL 13 8 1/2“ M 22x1,5 15 24 22,00

PN 13 HL 16 13 8 1/2“ M 26x1,5 18 27 26,00

PN 16 HL 13 16 10 5/8“ M 22x1,5 15 22 22,00

PN 16 HL 16 10 5/8“ M 26x1,5 18 27 26,00

PN 16 HL 20 16 10 5/8“ M 30x2 22 32 30,00

PN 20 HL 20 12 3/4“ M 30x2 22 32 30,00

PN 20 HL 25 20 12 3/4“ M 36x2 28 36 36,00

PN 25 HL 25 16 1“ M 36x2 28 41 36,00

PN 32 HL 32 20 1“1/4 M 45x2 35 46 45,00

PN 40 HL 40 24 1“1/2 M 52x2 42 55 52,00

24°T

PN HLSwage nipplemetric male 24° cone seat, light series (CEL), material: steel, zinced, yellow passivated


Designation DN size inch thread tube-Ø SW T


PN 04 HS 5 3 3/16“ M 16x1,5 8 17 16,00

PN 06 HS 04 6 4 1/4“ M 16x1,5 8 17 16,00

PN 06 HS 6 4 1/4“ M 18x1,5 10 19 18,00

PN 08 HS 06 8 5 5/16“ M 18x1,5 10 19 18,00

PN 08 HS 8 5 5/16“ M 20x1,5 12 22 20,00

PN 08 HS 13 8 5 5/6“ M 24x1,5 16 24 24,00

PN 10 HS 06 10 6 3/8“ M 18x1,5 10 19 18,00

PN 10 HS 10 6 3/8“ M 22x1,5 14 24 22,00

PN 10 HS 13 10 6 3/8“ M 24x1,5 16 24 24,00

PN 10 HS 08 10 6 3/8“ M 20x1,5 12 22 20,00

PN 13 HS 13 8 1/2“ M 24x1,5 16 27 24,00

PN 13 HS 16 13 8 1/2“ M 30x2 20 32 30,00

PN 16 HS 16 10 5/8“ M 30x2 20 32 30,00

PN 20 HS 20 12 3/4“ M 36x2 25 36 36,00

PN 25 HS 20 25 16 1“ M 36x2 25 36 36,00

PN 25 HS 25 16 1“ M 42x2 30 46 42,00

PN 32 HS 32 20 1“1/4 M 52x2 38 55 52,00

SW

24°T

PN HSSwage nipplewith metric male 24° cone seat, heavy series (CES), material: steel, zinced, yellow passivated


Designation DN size inch thread tube-Ø SW T


fafafafa

Phone: (61)(07) 3279 2627Fax: (61)(07) 3279 2630Email: [email protected]

11/45 Jijaws StreetSumner Park Q 4074

PO Box 525Sumner Park Q 4074

Phone: (61)(03) 9369 2555Fax: (61)(03) 9369 2655Email: [email protected]

10/227-231 Fitzgerald RoadLaverton North Vic 3026

PO Box 456Sunshine Vic 3020

Brisbane Office Melbourne Office

www.flanges-au.com

Metric Hose

Documents

Transcript of Metric Hose