METRECOMETRECO

smart mobile measuringsmart mobile measuring

2

Metreco

Compressor

Filter-d

ryer

Expansionvalve

Receiver

EVAPORATOR

CONDENSER

HANDHELD

Digital Wireless System Analyzer �Measure and log all critical system data in real time, also COP �

Improve on-site efficiency - Be more professional �No more running around- Speed up measurements �Gain time substantially on each job �

Certified reporting and PED protocols �Pressure and Vacuum Decay Tests �All data such as Superheat, Subcool, Delta T&P and COP �

Optimize system efficiency with Metreco Smart-COP � ®Calculate Cooling Power with Ampclamp and Smart-COP � ®

Metreco smart mobile measuring - digital wireless system analyzer

Of course, you could check the fac-tory values. But that would be like be-lieving the factory MPG values in a car commercial.

The truth is, the COP of any cooling system depends highly on operating con-ditions. So, there’s no alternative than to average it against expected conditions, right?

Wrong. Meet the new Smart-COP fea-ture of Metreco.

The wireless measuring system now provides you with exact COP values. Fast, precise and in real time.

Imagine the cooling technician adressing his client: “I’ve just improved your COP from 3 to 4. Which saves you $xxx,xx a year. You’re welcome.”

Now that would make for a very hap-py client, wouldn’t it?

The bottom line: Metreco enables cooling technicians to save energy, time and money.

Now that’s smart mobile measuring.That’s Metreco.

Is your COP low?

You’ll never know.

3

Metreco

Metreco is supplied with: 1 Charging station / case � 1 Low Pressure Sensor 300 PSI � 1 High Pressure Sensor 750 PSI � 2 Temperature sensors -60+300°F � Metreco Handheld � Adaptor 110V � 12V cigarette lighter plug � USB cable � Manual � Set of hoses & connectors �

Dynamic measuring with METRECO, Smart Mobile �Measuring, instead of static measuring with traditional manifold with hoses and temperature probes.Up to 10 sensors transmit their measurements �simultaneously to the Handheld: no hoses - no wires.The user positions himself where he wants/walks around �and can read out the measurements in real time.Intuitive/natural easy-to-use interface is operated with a �capacitive touchscreen.

Define your measurement/value targets �- get a warning when they are off.Measurement - Diagnosis - Suggestions / Solutions. �Database of serviced ACR systems �available on Handheld & PC.Measurement reports on Handheld & PC. �Intervention reports on Handheld & PC. �

Charge your handheld and sensor batteries in the �specially designed case / docking station.Extra hoses and connectors for handling refrigerant. �

Storage

Lid with protective foam

Handheld

Sensors

Charging LED

Space for 3extra sensors

Socket for charging-cable 12V &220V

Metreco Handheld

Metreco Sensors

Metreco smart mobile measuring - digital wireless system analyzer

Product code: MT03ST �

4

Metreco

Metreco with Smart-COP® is supplied with: 1 Charging station / case � 1 Low Pressure Sensor 300 PSI � 2 High Pressure Sensors 750 PSI � 3 Temperature sensors -60+300°F � 1 Absolute Vacuumgauge with overpressure & ball valve � 1 Amp-probe with Rogowski coil � 1 Repeater (range extender) � Metreco Handheld � Adaptor 110V � 12V cigarette lighter plug � USB cable � Manual � Set of hoses & connectors �

Measure the system’s instant, real time and average COP �with Metreco Smart-COP®

Calculate the system’s Cooling Power by measuring the �absorbed electrical power and the COP

Measure the COP several times each year �and calculate your Seasonal COP

Prove the energy efficiency enhancement you have �established by measuring the COP before and after you intervention and prove the savings you made possible

Metreco Handheld

Metreco Sensors

Metreco smart mobile measuring - Smart-COP®

Product code: MT03COP �

Smart-COP

5

Metreco

300 PSI Low pressure sensor �750 PSI High pressure sensor �Stainless steel 1/4” SAE female connectors �3 hoses �Connectors: 1/4”SAE-1/4”GAS �& 1/4”GAS-1/2”GAS & T-connector NH3 - R717 - Ammonia �

Metreco NH3 KitSpecially designed sensors and hoses for Ammonia applications

1500 PSI Low pressure sensor �3000 PSI High pressure sensor �3 hoses �CO2 Transcritical - R744 �

Metreco CO2 Transcritical KitSpecially designed sensors and hoses for CO2 Transcritical applications

Absolute vacuum sensor (Class 0,5) �with safety valve (+850PSI) �with ball valve �Range: +750.000 micron - 0 micron �Valve core remover �

Metreco Absolute Vacuum KitAbsolute vacuum sensor & Valve core remover

Product code: KN03ST �

Product code: KC03ST �

Product code: KV03ST �

6

Metreco

300 PSI pressure sensor, 1/4”SAE female �750 PSI pressure sensor, 1/4”SAE female �CFC, HFC, HCFC and CO2 Subcritical �Suitable for measuring oil pressure �Precision: Class 0,5 (0,5% FS) �Overpressure (300/750 PSI): 600 PSI / 1400 PSI �Burst overpressure: 1000 PSI / 2100 PSI �

Autonomy ON: >180h (>7days) �Autonomy OFF: >1,5 year �Battery: LiPo (Lithium Ion Polymer) �Wireless range: min. 400ft (open air) �Protection: IP64 with cap closed �

Metreco Standard Pressure SensorsStandard refrigerants: HFC, CFC, HCFC & CO2 Subcritical

300 PSI pressure sensor, stainless steel 1/4”SAE female, NH3 �750 PSIpressure sensor, stainless steel 1/4”SAE female, NH3 �R717 (NH3 - Ammonia), CFC, HFC, HCFC, CO2 Subcritical �Suitable for measuring oil pressure �Precision: Class 0,5 (0,5% FS) �Overpressure (300/750 PSI): 600 PSI / 1400 PSI �Burst overpressure: 1000 PSI / 2100 PSI �

Autonomy ON: >180h (>7days) �Autonomy OFF: >1,5 year �Battery: LiPo (Lithium Ion Polymer) �Wireless range: min. 400ft (open air) �Protection: IP64 with cap closed �

1500 PSI pressure sensor, 1/4”SAE female, CO2 Transcritical LP �3000 PSI pressure sensor, 1/4”SAE female, CO2 Transcritical HP �CO2 Transcritical (also suitable for CFC, HFC, HCFC) �Suitable for measuring oil pressure �Precision: Class 0,5 (0,5% FS) �Overpressure (1500/3000 PSI) : 2900 PSI / 5800 PSI �Burst overpressure (1500/3000 PSI) : 3600 PSI / 6500 PSI �

Autonomy ON: >180h (>7days) �Autonomy OFF: >1,5 year �Battery: LiPo (Lithium Ion Polymer) �Wireless range: min. 400ft (open air) �Protection: IP64 with cap closed �

Metreco CO2 Transcritical Pressure SensorsCO2 Transcritical

Metreco NH3 Pressure SensorsNH3 - R717 - Ammonia

Product code: LP: Pu0300M14S - HP: Pu0750M14S �

Product code: LP: Pu0300i14S - HP: Pu0750i14S �

Product code: LP: Pu1500M14S - HP: Pu3000M14S �

7

Metreco

Metreco Temperature SensorPT1000 Sensor

Metreco Absolute Vacuum SensorAbsolute vacuum, does not need calibration before use

Range: -60+300°F �Precision: 0,5°F �Autonomy ON: 119h (~5days) �Autonomy OFF: >1,5 year �

Battery: LiPo (Lithium Ion Polymer) �Wireless range: min. 400ft (open air) �Protection: IP64 with cap closed �

Available with Velcro strap for pipe mount or �with clamp for ventilator air flow

Absolute vacuum sensor, �does not need calibration before useRange: +750.000micron - 0micron �Precision: Class 0,5 (0,5% FS) �Overpressure: 70 PSI �

Autonomy ON: >180h (>7days) �Autonomy OFF: >1,5 year �Battery: LiPo (Lithium Ion Polymer) �Wireless range: min. 400ft (open air) �Protection: IP64 with cap closed �

Also available with safety valve (+850PSI) and ball valve �

Product code: Tu0300PV (Velcro) - Tu0300PK (Clamp) �

Product code: Vu0750M14S - Vu0750M14S-28 (Ball valve) �

Metreco Amperage SensorWith easy to apply Rogowski coil

Electrical intensity �2 Amperage ranges in 1 device: 0-25A & 0-600A �

Flexible Rogowski Coil �Precision: +-100mA (0-25A) & +- 250mA (0-600A) �

Measure 1-phase or 3-phase �Measure 3-phase with 1 sensor or �more accurate with 3 sensors

Product code: Cu0600RG �

8

Metreco

Metreco Accessories & SparesCheck our website: www.metreco.com �Contact us: info@metreco.com �

Metreco RepeaterRange extender +400ft - repeats all Metreco radio signals

Radio frequency repeater �Range extension: +400ft �

Repeats all Metreco radio signals �Combine multiple repeaters if necessary �

Available with Velcro strap or clamp �

Product code: RPT03V (Velcro) - RPT03K (Clamp) �

We strongly advise you to have your sensors calibrated yearly in accordance with notional and local legislation!

Metreco Product ReferencesPanimpex Code

DeviceMT03STMT03AAMT03COP

KitsKV03STKC03STKN03ST

Spare PartsHH03STPu0300M14SPu0750M14SPu0300I14SPu0750I14SPu1500M14SPu3000M14STu0300PVTu0300PKVu0750M14SVu0750M14S-28RPT03VRPT03KCu0600RGDS01STMA01ST

MA01ST containsS41B12-150S41B13-150S41B14-150AC0107-8101AC0107-8102AC0107-7410AC0107-8104AC0107-8105AC0107-8110

Other SparesCERTIFICAT-MTOCERTIF-ETALT3AWT3BEAC0107-3010

Description

Metreco HVAC MK1: standard complete Metreco SetMetreco complete set without sensorsMetreco COP Kit 3 pressure, 3 temp, 1repeater, 1 amp clamp, 1vacuum Kit Vacuum: Vacuum sensor (Overpressure- & Ball Valve) + shraeder remover Kit CO2 Transcritical: 1500PSI & 3000PSI pressure sensors + hosesKit NH3: 300PSI & 750PSI pressure sensors with Stainlessteel couplers + hoses Metreco handheld standard300 PSI pressure sensor, messing 1/4"SAE female with schraeder depressor750 PSI pressure sensor, messing 1/4"SAE female with schraeder depressor300 PSI pressure sensor, stainless steel 1/4"SAE female (NH3)750 PSI pressure sensor, stainless steel 1/4"SAE female (NH3)1500 PSI pressure sensor, messing 1/4"SAE female with schraeder depressor3000 PSI pressure sensor, messing 1/4"SAE female with schraeder depressor-60..300°F temperature sensor, Velcro-60..300°F temperature sensor, ClampAbsolute vacuum SensorAbsolute vacuum Sensor + Overpressure valve + Ball valveRepeater: range extender +400ft with VelcroRepeater: range extender +400ft with ClampElectrical intensity sensor: Amperage sensor with Rogowski coil - 0-600AStandard Metreco case & charging-stationStandard accessories for Metreco: hoses, couplers, adaptors, USB-cable Red hose, 1/4”SAE-1/4”SAE with ball-valve; 5ft; teflon; 800PSIBlue hose, 1/4”SAE-1/4”SAE with ball-valve; 5ft; teflon; 800PSIYellow hose, 1/4”SAE-1/4”SAE with ball-valve; 5ft; teflon; 800PSI (2pcs in MA01ST)T-connector 1/4”SAE female with swivel and 2x 1/4”SAE male with schraederX-connector 4x 1/4”SAE maleAdaptor 1/4”SAE – 5/16”SAE (2pcs in MA01ST)USB cable12V Cigarette lighter cord110V wall charger, USA Sensor Calibration Certificat – complete Metreco setSensor Calibration Certificat – individual Sensorset of 3 hoses for Ammonia, R717, NH3, 5ft, 1/4”GAS-1/4”SAEset of 3 hoses for CO2 Transcritical, R744, WP200Bar, 5ft, 1/4”SAE-1/4”SAEValve Core Remover