WHEEL WELL LED LIGHT KIT

MPS-RGBWWK

11/07/2018

INSTALL NOTES:

MPS-RGBWWK

MPS-RGBWWK

MPS-RGBWWK

7

3

1) Ignition turns on control box: - Red wire to 12 volt constant wire - Blue/White wire to 12 volt accessory wire - Black wire to (-) ground

2) MPS-BTR (Snap-in Bluetooth controller) turns on control box: - Red wire to 12 volt constant wire - Blue/White wire to Blue wire of the MPS-BTR - Black wire to (-) ground

3) Remote mounted on/o� switch turns on control box: - Red wire to 12 volt constant wire - Blue/White wire to an on/o� switch, other side of switch to a fused 12 volt constant wire - Black wire to (-) ground

6

MPS-RGBWWK LED CONTROLLER PHONE APP

(2) extra72”extension cables included

(20) 6”cable ties

MOUNTING OPTIONS

3M adhesive pad

screwscrew

(2) extra72”extension cables included

(20) 6”cable ties

MOUNTING OPTIONS

3M adhesive pad

screwscrew

LED CONTROLLER INTRODUCTION/SETUPMPS-RGBWWK WIRING INSTALLATION GUIDE

Red:12V Constant(10Amp ATC Fuse)

Blue\White:Remote Tum On

Black:Ground

RGB LEDController

QuickConnects

Red:12V Constant(10Amp ATC Fuse)

Blue\White:Remote Tum On

Black:Ground

RGB LEDController

QuickConnects

Red:12V Constant(10Amp ATC Fuse)

Blue\White:Remote Tum On

Black:Ground

RGB LEDController

QuickConnects

MPS-RGBWWK LED CONTROLLER PHONE APP

4 54 5

MPS-RGBWWK WIRING INSTALLATION GUIDE

LED CONTROLLER INTRODUCTION/SETUP

Red:12V Constant(10Amp ATC Fuse)

Blue\White:Remote Tum On

Black:GroundRGB LEDController

Quick Connects

MPS-RGBWWK WIRING INSTALLATION GUIDE