METALLURGICAL TESTING SERVICESMetallography is the microscopic study of the structure of metals and...
Transcript of METALLURGICAL TESTING SERVICESMetallography is the microscopic study of the structure of metals and...
» Mechanical Testing
» Metallography Testing
» Corrosion Testing
» Failure Analysis
METALLURGICAL
TESTING
SERVICES
SPECTRO ANALYTICAL LABS LTD. www.spectro.in
Spectro has a fully equipped and competent in-house Mechanical Testing
Facility to provide precise, reproducible and reliable determination of
various Mechanical tests like Tensile strength, Compressive strength,
Bend/re-bend test, Impact test (Charpy), Flattening test, Hardness test,
weldability and tests of various other mechanical and engineering
properties. Spectro also specializes in Proof Stress test and Tensile test at
elevated temperatures. Tests are meticulously conducted as per various
national and international standards like IS, ASTM, BS, ISO, etc. or client-
specified standards, and the compliance of test items to various
specifications is properly and accurately decided.
Mechanical Testing Services
Mechanical Tests Conducted
» Tension tests on product» Brinell Hardness Test» Rockwell Hardness Test » Rockwell Tests using B, C scales» Vicker Hardess Test» Tension and Crushing Tests
» Micro hardness Tests » Impact tests, Charpy, Izod, BS & ASTM, upto -196 °Ctransverse Bend Test on reinforcement for concrete Tests on » Tests on Tubes-Flattening
We Conduct Corrosion studies in chemical plants and cross country pipelines to evaluate the suitability of structures. In-situ metallographic technique is also used independently to evaluate various types of corrosion in equipment and components working under severe conditions.
Some of the tests we carry out are :
» Oxalic Acid Test, ASTM A 262, Practice A» Ferric Sulfate - Sulfuric Acid, ASTM A262 - Practice B» Nitric Acid, ASTM A262, Practice C, (Huey Test)»Copper - Copper Sulfate - 16% sulfuric acid, ASTM A262 - Practice E (Straus Test) » Copper - Copper Sulfate - 50% sulfuric acid, ASTM A262 - Practice F» Salt Spray (Neutral / Fog), ASTM B117» Pitting Corrosion Test, ASTM Gr 48» Crevice Corrosion» Hydrogen-Induced Cracking (HIC) Test, NACE TMO284» Sulfide Stress Corrosion Cracking (SSCC), NACE TM 0177» Cyclic Corrosion test (CCT) started as per International Standards
Corrosion Testing Services
Our Services
»
and Shear Tests.
HTS wire
SPECTRO ANALYTICAL LABS LTD. www.spectro.in
Spectro has wide experinece to detect any type of failure can be expected to occur at the weakest link in the chain of the continuous process of engineering design, fabrication, and performance. ‘Failure analysis’ of engineering materials is the systematic investigation of the cause of failure of a component, and the subsequent prevention of future failures based on acquired data on failure. Analyzing failures is an important step in determining the physical root causes of problems. After the completion of the investigation, its findings are documented in a report.
Spectro has world class facilities to conduct metallography testing Metallography. Metallography is the microscopic study of the structure of metals and alloys. The primary objective of metallographic examinations is to reveal the ‘microstructure’ of the metals and alloys, i.e. their internal structures as a result of the composing atomic elements and their three-dimensional arrangement over distances ranging from 1µm to 1 mm by means of a light optical or scanning electron microscope (SEM)
» Grain boundaries» Phases
» Phase transformation and volume fractions» Non-Metallic Inclusions in Steel
» Morphology and banding
» Effective case depth» Porosity,
» Cross contamination
Failure Analysis is done through & sophisticated testing techniques like.
» Composition Analysis» EDAX» Optical - Microscope
» XRF» XRD» SEM
Metallography Testing Services
Failure Analysis
Pipeline Nuclear Power PlantThermal Power StationInfrastructure
»»
»»
Sectors Served
SPECTRO ANALYTICAL LABS LTD. www.spectro.in
E-41 Okhla Industrial Area Phase-IINew Delhi-110020Ph:- 91 11 40522000, 41611000E-mail: [email protected]:- www.spectrogroup.com www.spectro.in
Head Office Corporate Office
S-1 GNEPIP, Surajpur Industrial AreaKasna, Greater Noida, Phase-V
Gautam Budha Nagar (U.P.)Pin Code: 201308
Ph:- 0120-2341251/52 E-mail:- [email protected]
URL:- www.spectrogroup.com2017
Major Ac�vi�es
R&D
Automation
Reverse Engineering
Testing
Calibration
Training
Inspection
Ü Metals & Alloys
Ü Non Destructive Testing
Ü Rubber & Polymers
Ü Food and Agro Products
Ü Coal, Solid Fuels & Petroleum
Ü Electrical & Electronics
Ü Pharmaceuticals & Drugs
Ü Building Materials
Ü Minerals & Chemicals
Ü Leather & Textiles
Ü Water & Environment
Ü Paper & Packaging Materials
Ü Hazardous Substances
Ü Clean Room Validation
CIN:U74220DL1998PLC092698