Durable, lightweight & easy to installMETAL FENCING

UP TO A 10 YEAR WARRANTY* * (For moderate environments - see inside for terms and conditions)

NEW ZEALAND STEEL

Metalcraft Fencing panels are manufactured from locally sourced steel from New Zealand Steel in

COLORSTEEL® ENDURA®.

The G550 high tensile steel is strong, robust and durable and low in maintenance.

AZTEC PROFILE

VERSATILE

Metalcraft Fencing can be used in different design scenarios providing you with greater versatility and can be used as infill panels between block or brick columns.

Metalcraft Fencing can be installed in both flat and sloping sites, please consult your nearest Metalcraft Fencing branch for actual site limitations.

QUOTES

Contact your local Metalcraft Roofing branch for a quote.

PEACE OF MIND

Metalcraft Fencing has no toe holds this makes it harder to climb up giving you, more peace of mind.

DURABLE

Metalcraft Fencing offers the longevity and durability of steel and saves you the trouble of post painting.

19

97.519

32

KAHU PROFILE

A contemporary look with strong defined shadow lines. The Kahu profile has a high rib symmetrical profile which looks great from either side of the fence.

AZTEC PROFILE

Aztec has strong defined lines. The Aztec profile has a raised five rib trapezoid form on one side, and a flat aspect on the other. Aztec is a very popular profile that will complement any home or project.

190 25 29

PROFILE OPTIONS

RANGE OF GATES

Metalcraft Roofing has a range of gates to complement the standard range of Metalcraft fencing and accessories. Please contact your local Metalcraft Branch for more information.

POST AND RAILS An innovative roll formed post and rail system offers the dual benefit of strength and ease of installation. A key advantage of this fencing system is that our steel posts and rails are robust enough to eliminate the need for any intermediate rails, affording clean lines and a tidy look on both sides of the fence.

The post and rails are manufactured from double sided 0.75BMT G550 galvanised steel from New Zealand Steel and are available as standard in the same colours as the fence.

If you want you can also request post and rails in another complementary colour to the metal fence panels. Refer to the 6 stocked colours for options.

Dimensions are nominal and may vary. Check with your nearest Metalcraft Fencing branch for profile dimensions.

Dimensions are nominal and may vary. Check with your nearest Metalcraft Fencing branch for profile dimensions.

Metalcraft Fencing is available in 2 popular profiles. The Aztec profile offers a wide pan for a sleeker cleaner look and Kahu offers a contemporary symetrical profile that looks great from both sides of the fence.

Manufactured from double sided 0.40BMT G550 COLORSTEEL® ENDURA®.

Standard fence height of 1.8m. Custom heights are also available, please check with your nearest Metalcraft Fencing branch.

Please consult your nearest Metalcraft Fencing branch for panel spacing options.

Manufactured from double sided 0.35BMT G550 COLORSTEEL® ENDURA®.

Standard fence height of 1.8m. Custom heights are also available, please check with your nearest Metalcraft Fencing branch.

Please consult your nearest Metalcraft Fencing branch for panel spacing options.

POOLSIDE AND BARRIER FENCE

Poolside and barrier fencing require specific design requirements outside the standard scope of Metalcraft Fencing. Please contact your nearest Metalcraft Fencing branch as to the suitability of Metalcraft Fencing for these specific areas.

EASY INSTALLATIONMetalcraft fencing is simple to install. Posts are screwed together back to back before being secured in position, which gives them considerable strength in the ground. The rail sections are designed to slip inside the post profile snugly to ensure a good fit, then screwed in place to retain the infill panels. Our posts and rails are prepainted to your requirements and run in fixed lengths to simplify ordering and minimise labour on site.

STEP BY STEP INSTALLATIONEASY INSTALLATION VIDEOS AVAILABLE:

www.metalcraftgroup.co.nz

1. Set the string line

2. Mark the post holes

3. Dig the post holes

4. Assemble intermediate posts

5. Erect end posts

6. Cement end posts

7. Reset the stringline for intermediate posts

8. Erect intermediate posts

9. Insert and fasten bottom rails

10. Drop in infill panels

11. Insert and fasten top rails

• Pegs • Stringline • Measuring tape • Spray can • Shovel or auger• Level• Bungee cord• Wheelbarrow • Vice grips • Drill or tek gun • Tek drive bit

KAHU PROFILE

Tools required

STOCKED COLOURS

TITANIA

DESERT SAND

GREY FRIARS

MIST GREENFLAXPOD®

IRONSAND

Metalcraft Fencing is available in 6 popular double sided colours from New Zealand Steel in COLORSTEEL® ENDURA®. For non-stocked colours please check availability and minimum order quantities with your local Metalcraft Fencing branch.

We strongly recommend checking your chosen colour against an actual sample of the product before purchasing as varying light conditions and limitations of the printing process will affect colour tones. These can be obtained from your nearest Metalcraft Fencing branch.

UP TO 10 YEAR MATERIAL WARRANTY*

Metalcraft Fencing Panels are backed by a warranty of up to 10 years from NZ Steel for COLORSTEEL® ENDURA® in moderate environments only. This warranty of metal fencing is subject to exclusions, application and eligibility criteria.

*Terms and conditions apply.

For full terms and conditions and to determine the exclusions and eligibility of your Metalcraft fence for the warranty. Please download the Metalcraft Fencing's -Warranty and Maintenance Guide. Available on www. metalcraftgroup.co.nz or contact your nearest Metalcraft Fencing branch.

KAHU PROFILE

BRANCHES

Metalcraft Roofing are members of the Roofing Association, New Zealand and the New Zealand Metal Roofing Manufacturers Incorporated.

Brochure version November 2018.

WHANGAREI42-44 Rewa Rewa Road, Whangarei 09 470 0870sales.whangarei@metalcraftroofing.co.nz

AUCKLAND NORTH SHORE4 Silverfield, Wairau Park, Glenfield, Auckland09 444 1813sales.auckland@metalcraftroofing.co.nz

AUCKLAND EAST TAMAKI26 Trugood Drive East Tamaki, Auckland09 273 2820orders.akl@metalcraftroofing.co.nz

HAMILTON25 Sheffield Street, Hamilton07 849 3807sales.hamilton@metalcraftroofing.co.nz

TAURANGA42 Poturi St, Tauriko, Tauranga 07 575 7032 sales.tauranga@metalcraftroofing.co.nz

ROTORUA15 Monokia Street, Rotorua07 350 1138sales.rotorua@metalcraftroofing.co.nz

NEW PLYMOUTH218 De Havilland Drive, Bell Block, New Plymouth06 755 2113sales.newplymouth@metalcraftroofing.co.nz

PALMERSTON NORTH76 Malden Street, Palmerston North 06 358 9149sales.palmerston@metalcraftroofing.co.nz

HASTINGS1454A Omahu Road, Hastings06 873 9020sales.hastings@metalcraftroofing.co.nz

WELLINGTON201 Gracefield Rd, Seaview, Lower Hutt 04 566 2253sales.wellington@metalcraftroofing.co.nz

CHRISTCHURCH85 Columbia Ave, Hornby, Christchurch 03 349 7350sales.christchurch@metalcraftroofing.co.nz

CROMWELL20 McNulty Road, Cromwell03 445 4180sales.cromwell@metalcraftroofing.co.nz

For more information on Metalcraft Roofing visit: www.metalcraftgroup.co.nz

Metalcraft Roofing is part of the United Industries Group. visit: www.unitedindustries.co.nz.

DISCLAIMER

As part of Metalcraft Roofing’s policy of continuedimprovement, final specifications may vary from thosecontained in this publication.The company reserves the right at any time and without notice to change the design, materials or features and withdraw products from the market without incurring any liability whatsoever.This publication is issued as a general guide only and shouldnot be treated as a substitute for technical advice. Contactwith your nearest Metalcraft branch is recommended toconfirm current specifications and availability.

Metalcraft Fencing is also available from: