Metal Fabrication Oxygen & Acetylene Integra ® Cylinders 2014.
-
Upload
theresa-mathews -
Category
Documents
-
view
223 -
download
0
Transcript of Metal Fabrication Oxygen & Acetylene Integra ® Cylinders 2014.
Metal Fabrication
Oxygen & Acetylene Integra® Cylinders
2014
Oxy-Fuel Gases
• Acetylene is a commonly used fuel gas for:
- Oxy-fuel welding
- Cutting
- Brazing
• Excellent choice for almost all general cutting and welding applications
• The gas of choice for specialist repair work: it offers a unique ability to cut,
weld and braze with a single fuel gas
• Also, it produces the most concentrated and versatile heat of all fuel
gases when burned with oxygen
Oxy-Fuel Safety Video
Double Click Here
To start the video
Oxygen and Acetylene Integra® Cylinder
Protective valve guard
‒ Prevents accidental damage ‒ Makes the cylinder easy to
handle‒ Independently safety tested ‒ Exceeds the requirements of
EN ISO 11117 ‒ Protects all critical
components and provides full access for valve operation.
Oxygen and Acetylene Integra® Cylinder
Protective valve guard
Built-in regulator‒ Calibrated and maintained by
Air Products. ‒ Regulates outlet pressure and
provides a variable pressure control (0-8 bar).
‒ Suitable for all cutting, welding and brazing applications.
Oxygen and Acetylene Integra® Cylinder
Protective valve guard
Built-in regulatorContents gaugeAlways shows how
much gas is left, even when cylinder is not in use!
Protective valve guard
Built-in regulatorContents gauge
Filling port Air Products use
only
Oxygen and Acetylene Integra® Cylinder
Quick connect gas outletAllows safe and rapid gas cylinder change-over.
Safety device in valve outlet ensures no gas flow if the quick connector is not fitted to the valve.
Quick connector with built-in safety
Ensures the safest connection every timethe cylinder is used. Snap-on connectionto cylinder – no spanner needed. Additional safety locking and release device prevents accidental removal.
Built in safety devices:• Safety locking and release mechanism• Flame arrestor• Non-return valve• Thermal cut-off valve• Dust filter
Oxygen and Acetylene Integra® Cylinder
• Smaller, lighter and more manoeuvrable than traditional cylinders
• Lower risk of cylinder falling, shorter and more stable than traditional cylinder
• Never buy, repair or calibrate a regulator again
• Regulator fully contained within protective guard
• Reduced exposure to pressure hazard, built-in regulator controls pressure and cannot be removed
• High pressure (300bar) filling technology to deliver a large volume of oxygen in each cylinder*
• Built-in flashback arrestor with snap-on connection and safety locking and release mechanism
• Hand-operated on/off valve (no need for bottle keys)
*Does not apply to acetylene cylinders
Integra® Cylinder
More InformationDouble click to open the brochure
Thank you tell me more