METAL CEILING SYSTEMS

METAL CEILING SYSTEMS

OPEN CELL

INTEGRA PLANK

INTEGRA EXPANDED

INTEGRA SPECIALS

INTEGRA TILE

INTEGRA OPEN CELL

DELTA

26

UNITECH

32

QUADRO

QUADRO S

07QUADRO T

13QUADRO INVERSEQUADRO LINE

18 23

PARALITE

PARALITE

37

DELTA LINE

29DELTA

PARALITE MEGA

37

03

UNITECH

Integra Open Cell ceilings arethe ideal solutions for a wholerange of buildings such as,o f f i c e s , s u p e r m a r k e t s ,shopping centers and airportswhere the maximum of lightand air are required.

Integra Open Cell helps createa space that is once boths t r i k i n g l y o p e n a n dtransparent but also smartfunctional.

04

INTE

GR

A O

PEN

CEL

L

05

Quadro S is the aluminum open cellceiling made up of "U" shapedprof i les wi th base and heightdimensions dependent on therespective application. The multiplechoice of type, cell size and finishoffers designers and architects a hostof possibilities in line with ther e q u i r e m e n t s o f i n t e g r a t e da r c h i t e c t u r e . T h e c o n c e a l e dsuspension system with main andcross runners made of the sameprofi les as the panels gives amonolithic, trackless appearance.Quadro S features 600x600 mm (or600x1200 mm) panels , whichsuitably joined form a square cell.

Quadro S is usual ly suppl iedunassembled. It allows for easierpackaging and more economictransport. Upon request, the panelscan also be supplied assembled.

QUADRO S(Self-Supporting Ceiling)

07

QUADRO S (Self-Supporting Ceiling)

Quadro s can be supplied either plain or perforated to achieve aesthetic and acoustic requirements.Standard perforation patterns are provided below.

Ø 1.5 mm hole22 % open area


PERFORATION

COLOUR OPTIONS A wide range of finishes either from pre-painted or post-painted aluminum is available in RAL,NCS, PANTONE and SIKKENS colours. Upon request, panels with a wood appearance can beproduced.

08

Dimensions are in mm.

yxh

DIMENSIONS

b10

h30

x y h50 50 3060 60 3066 66 3075 75 3086 86 30

100 100 30120 120 30150 150 30200 200 30

b5 (

or 4

)h3

0

x y h30 30 3040 40 3050 50 3060 60 3066 66 3075 75 3086 86 30

100 100 30

b10

h40

x y h50 50 4060 60 4066 66 4075 75 4086 86 40

100 100 40120 120 40150 150 40200 200 40

x y h50 50 4060 60 4066 66 4075 75 4086 86 40

100 100 40120 120 40

b12

h40

x y h50 50 5060 60 5066 66 5075 75 5086 86 50

100 100 50120 120 50

b10

h50

x y h86 86 80

100 100 80120 120 80150 150 80200 200 80300 300 80

b20

h80


09

h

b x

10

Accessories (1 m2) Unit 600x600 Panel

A-1800 Main runner (1800 mm) piece 0.94 0.47A-1200 Cross Runner (1200 mm) piece - 1.38A-600 Cross Runner (600 mm) piece 2.70 1.38A-07 Main Runner Profile Splice piece 0.94 0.47Hanger Bracket With Spring piece 2.00 1.00DST-01 Hanger Wire piece 2.00 1.00TP-02 Steel Anchor piece 2.00 1.00

30-66 CELL 75-300 CELL

INSTALLATION Quadro S contains a fully integrated suspension system. This system consists of main runner(T1800) and cross runners (T1200/T600) which have the same profile as the panels. The mainrunner is installed every 1200 mm (600 mm if cell size is smaller than 75x75) while the crossrunner is mounted between the main runners once every 600 mm.


DST-01

IHB-S

A-1800

A-600

A-1200

A-07

Quadro T15 or T24 are aluminum open cellceilings made up of "U" shaped profiles withwidth of 15 or 24 mm and various heights.Specifically designed to fit into standard 15or 24 mm wide T-grids, they provide amonolithic trackless appearance on the ceiling.

QUADRO T

13

QUADRO T

Quadro T can be supplied either plain or perforated to achieve aesthetic and acoustic requirements.



PERFORATION

COLOUR OPTIONS A wide range of finishes either from pre-painted or post-painted aluminum is available in RAL,NCS, PANTONE and SIKKENS colours. Upon request, panels with a wood appearance can beproduced

14

yx

h

QUADRO T

Acoustic Fleece

b15

h50

x y h50 50 5060 60 5066 66 5075 75 5086 86 50

100 100 50120 120 50150 150 50200 200 50

b15

h40/

55

x y h50 50 4060 60 4066 66 4075 75 4086 86 40

100 100 40120 120 40150 150 40200 200 40

b15

h30

x y h50 50 3060 60 3066 66 3075 75 3086 86 30

100 100 30

b24

h35

x y h100 100 35120 120 35150 150 35200 200 35300 300 35

DIMENSIONS

30

15 15

50

15 15

40

15 15

55

35

24 24

b15 h30

b15 h50

b15 h40/55 (Acoustic Fleece Application)

b24 h35

40

15 15

16

T24 Suspension Accessories (1 m2) Unit 600x600 Panel

DST-01 Hanger Wire piece 1.00HDVC/4 Double Spring Clip piece 1.00T24 Main runner (3600 mm) piece 0.83T24 Cross Runner(1200 mm) piece 1.67T24 Cross Runner (600 mm) piece 0.83

INSTALLATION Quadro T is usually supplied unassembled. It allows for easier packaging and more economictransport. Upon request, the panels can also be supplied assembled.

Quadro T is installed with T-profile supports with lengths of 3600, 1200 and 600 mm and widthsof 15 or 24 mm. When a panel is fitted on the support, the suspension system becomes integratedwith the panels. In order to conveniently access the plenum, the panels can be pushed upwardand then, one by one, easily removed or fitted.

QUADRO T

T15 Suspension Accessories (1 m2) Unit 600x600 Panel

DST-01 Hanger Wire piece 1.00HDVC/4 Double Spring Clip piece 1.00T15 Main runner (3600 mm) piece 0.83T15 Cross Runner (1200 mm) piece 1.67T15 Cross Runner (600 mm) piece 0.83

17

HDVC / 4

DST-01

T15 / T24 Suspension System

Quadro Line is the linear solution of theQuadro S aluminum ceiling system.

Quadro Line features 1200x600 mm modularpanels, made of “U” blades with a base of 5or 10 mm and height of 30/40 mm.

QUADRO LINE

18

Quadro Line can be supplied either plain or perforated to achieve aesthetic and acousticrequirements. Standard perforation samples are provided below



PERFORATION

COLOUR OPTIONS A wide range of finishes either from pre-painted or post-painted aluminum is available in RAL,NCS, PANTONE and SIKKENS colours. Upon request, panels with a wood appearance can beproduced.

QUADRO LINE

19

20


QUADRO LINE

ATJ-100

DELTA-03

DELTA-01

DELTA-04

DELTA-02


DELTA-01 Suspension Channel m 0.80DELTA-02 Coupler piece 0.28DELTA-03 Spring piece 5.56DELTA-04 Panel Support Bridge piece 5.56ATJ-100 Threaded Rod piece 0.80

INSTALLATION The Quadro Line can be quickly and easily mounted and demounted on the ceiling.To ensure thedemounting process is quick and easy the plenum above the ceiling should be minimum of 80 mm.

DIMENSIONS Each panel is downward demountable and can remain fixed to the hinges without being completelyremoved.

Panels can be dropped downwards and allowed to hang from the profile from either the shortedge (600 mm) or optionally, the long edge (1200 mm)

The Quadro Line is usually supplied unassembled which allows for easier packaging and moreeconomic transport. The panels can also be supplied assembled upon reguest.

h

pp h

30 4040 4050 4060 4075 40b1

0 h4

0

5538

10

40

p h15 3025 3030 3040 3050 30

b5 h

30 4026

5

30

*************/ ‹STANBUL

21

23

Quadro Inverse is the inversesolution of the Quadro T ceilingsystem. It consists of 600x1200 mmmodular panels made up "π"shaped profiles with 15 mm baseand 40 mm height which are fullydownward demountable. Decorativeand functional Quadro Inverseceilings are ideal for projectsrequiring exclusive design.

QUADRO INVERSE

h

yx

QUADRO INVERSE

Quadro Inverse can be supplied either plain or perforated to achieve aesthetic and acousticrequirements. Standard perforation samples are provided below.



PERFORATION

COLOUR OPTIONS For our decorative desings, inner and outher surfaces can be produced in the same or differentcolours (all RAL colours)

b15

h40

x y h86 86 40

100 100 40120 120 40150 150 40

DIMENSIONS

24

QUADRO INVERSE

INSTALLATION Quadro Inverse is usually supplied unassembled which allows for easier packaging and moreeconomic transport. Upon request, the panels can also be supplied assembled.

Quadro Inverse can be easily mounted and demounted.


DELTA-01 Suspension Channel m 0.80DELTA-02 Coupler piece 0.28DELTA-03 Spring piece 5.56ATJ-100 Threaded Rod piece 0.80

25

DELTA-02

DELTA-03

ATJ-100

DELTA-01

40

15

26

Delta consists of 600x1200 mm panels combined with “ ” shaped profiles with basewidth a of 4 mm and height of 30 mm.

The suspension system is particularly effective on surface applications and achievesexcellent results and its enclosed structure reduces the proliferation of dust and thepresence of harmful materials in the air that can affect human health.

Delta is usually supplied unassembled which allows for easier packing and more economictransport. Upon request, the panels can also be supplied assembled.

DELTA

A wide range of finishes for either pre-painted or post-painted aluminum panels is available inthe RAL, NCS, PANTONE and SIKKENS colours.

COLOUR OPTIONS


DIMENSIONS

hy

x

b4 h

30

x y h30 30 3040 40 3050 50 3060 60 3066 66 3075 75 3086 86 30

100 100 30

30

4

27

DELTA

DELTA



INSTALLATION

DELTA-03

ATJ-100

DELTA-01

DELTA-02

28

Each panel is downward demountable and can remain fixed to the hinges without being completelyremoved.

Panels can swing down from the short edge (600 mm) or optionally from the long edge (1200mm) and left to hang from the profile.

29

Delta Line is the linear solution of the Delta aluminum ceiling system and is made upof 600x1200 mm modular panels produced from " " shaped profiles placed every 15mm, and are fully downward demountable.

Delta is usually supplied unassembled which allows for easier packaging and moreeconomic transport. Upon request, the panels can also be supplied assembled.

DELTA LINE

A wide range of finishes for either pre-painted or post-painted aluminum panels is available inthe RAL, NCS, PANTONE and SIKKENS colours.

COLOUR OPTIONS

DELTA LINE


DIMENSIONS

h

p

Profile h20, 4 mm base

Profile h30, 4 mm base

Special panels can be optionally produced up to a width of 1200 mm and length of 1800 mm.

30

p h25 3030 3040 3050 3060 30

b4 h

30 4026

4

20

4

3020

20

p h15 2025 2030 2040 20

b4 h

20

DELTA LINE

INSTALLATION Each panel is downward demountable and can remain connected to the hinges without being completelyremoved.

Panels can swing down from the short edge (600 mm) or optionally from the long edge (1200 mm)and left to hang from the profile.

Delta Line can be quickly and easily mounted and demounted on the ceilings. To ensure the demountingprocess is quick and easy the plenum above the ceiling should be a minimum of 80mm.


DELTA-01 Suspension Channel m 0.80DELTA-02 Coupler piece 0.28DELTA-03 Spring piece 5.56DELTA-04 Panel Support Bridge piece 5.56ATJ-100 Threaded Rod piece 0.80

DELTA-03

ATJ-100

DELTA-01

DELTA-04

DELTA-02

31

Unitech are mono-blade aluminum open cell ceilings, comprising assembled stripswhich form square or rectangular cells. The effect is highly decorative, allowing for anindirect diffusion of light. Unitech features 600x1200 mm modular panels, made up ofthe aluminum strips, which suitably assembled form square cell with dimensions andheights dependent on the application.

The perpendicular form and small size of the Unitech cells are a distinct advantage bothdecoratively and functionally, lift and utility installations as well as any above ceilingapplication.

Unitech is always supplied assembled.

UNITECH

UNITECH

32

UNITECH

Unitech can be supplied either plain or perforated to achieve aesthetic and acoustic requirements.Standard perforation patterns are provided below.



PERFORATION

COLOUR OPTIONS A wide range of finishes for either pre-painted or post-painted aluminum panels is available inthe RAL, NCS, PANTONE and SIKKENS colours.

33

a

h

b

h

Unitech comes in 3types according to theappearance of cells.

DIMENSIONS

UNITECH

a x b L

h1

h

a b h h1 L Thickness50 50 50 25 30 0.8060 60 50 20 15 0.8070 70 40 12 15 0.80UT3: CUBIC

h

UT2: INCLINED

a b h Thickness20 20 20 0.5030 30 25 0.50

h

UT1: STRAIGHTa b h Thickness

13 13 13 0.5013 13 25 0.5013 13 30 0.5013 13 40 0.5015 15 15 0.5017 17 13 0.5020 20 18.5 0.5020 20 20 0.5025 25 25 0.5030 30 25 0.5030 30 30 0.5035 35 30 0.5037.5 37.5 30 0.5040 40 30 0.6040 40 35 0.60

a b h Thickness45 45 30 0.6050 50 30 0.8050 50 35 0.8050 50 40 0.8050 50 50 0.8060 60 30 0.8060 60 35 0.8060 60 40 0.8060 60 50 0.8070 70 35 0.8070 70 40 0.8075 75 40 0.8075 75 50 0.80

100 100 50 0.80140 140 80 1.00

34

INSTALLATION The modular panels are suspended from a (1200x600 mm) concealed suspension system.

Unitech can be applied by 3 different systems:

1- Installed on T type suspension systems (T15 - T24)2- Hung from concealed tubes placed above the ceiling3- Mounted with Delta system

HDVC/4

DST-01

A-02

A-04

A-03

A-01

System A

A-06

HDVC/4

DST-01

A-05

A-01

System B

The suspension system allows convenient and quick installation of the panels.

UNITECH


A-01 Connection Bracket piece 4.90A-02 Suspension Bracket piece 0.70A-03 T Profile m 0.70A-04 T Splicer for T Profile piece 0.70HDVC/4 Double Spring Clip piece 0.70DST-01 Hanger Wire piece 0.70

System A Accessories (1 m2) Unit 600x1200 Panel

A-01 Connection Bracket piece 9.80A-05 Panel Suspension Hook piece 4.95A-06 Tube m 0.70HDVC/4 Double Spring Clip piece 0.70DST-01 Hanger Wire piece 0.70

System B

35

ATJ-100

DELTA-01

DELTA-03

DELTA-02

Delta System

Accessories (1 m2) Unit 600x1200 PanelDELTA-01 Suspension Channel m 0.80DELTA-02 Coupler piece 0.28DELTA-03 Spring piece 5.56ATJ-100 Threaded Rod piece 0.80

UNITECH

36

PARALITE

When Paralite open cell ceilings get biggerthey turn into Paralite Mega. The profile celland panel dimensions are larger but the "V"parabolic shape profiles and anti-iridescent,semi specular and anodized aluminumma te r i a l s emp loyed , a r e t he s ame .Furthermore, high quality lighting technologyand aesthetic architectural effects conceal thereal lighting source.

Paralite is a new concept in aluminium opencell ceiling systems. Through its “V” parapolicshape profile and the materials employed(anti-iridescent, semi specular, anodizedaluminum), Paralite is ideal for settingsrequiring a high light intensity, as in roomsequipped with video terminals, showrooms,shops, banks etc.

PARALITE MEGA

37

Paralite features 1200x600 and 800x800 mm modular panels comprising "V" shaped profiles30 mm high.

Paralite excludes any glare, both direct and indirect. The special paraboliticity of the grill preventsdirect glare and the reflection of lighting on the ceiling surface.

Paralite is always supplied assembled.

DIMENSIONS


h

yx

Paralite

ParaliteDelta

PARALITE

x y h50 50 3060 60 3075 75 30

x y h50 50 3060 60 3075 75 30

38

ATJ-100

DELTA-01

DELTA-03

Paralite is mounted on a concealed suspension system that adds a smooth appearance to thesystem. In the concealed Paralite system, panels are placed on expanded T profiles and can befitted and removed easily and quickly.

Paralite panels can also be mounted on the installed by Delta suspension system and can bedemounted from below. In this case, the standard module is 1200x600 mm.

HDVC/4

DST-01

A02

Delta Accessories (1 m2) Unit 600x1200 Panel



P-01 Connection Bracket piece 4.60A-02 Suspension Bracket piece 0.95A-03 T Profile m 1.20A-04 T Splicer for T Profile piece 0.22HDVC/4 Double Spring Clip piece 0.95DST-01 Hanger Wire piece 1.90

INSTALLATION

DELTA-02

A-04

P-01

PARALITE

39

A-03

HDVC/4

DST-01

A-06

A-05

Para l i te is car r ied by aconcealed suspension systemt h a t a d d s a s m o o t happearance to the system. InConcealed Paral i te Megasystem, the panels are placedon expanded T profiles andc a n b e m o u n t e d a n ddemounted easily and quickly.

INSTALLATION

Paralite Mega features 1200x1200 mm modular panels made of "V" profiles 100 mm high.

Paralite excludes any glare, both direct and indirect. The special paraboliticity of the grill preventsdirect glare and the reflection of lighting on the ceiling surface. Thanks to its lighting technology,Paralite Mega has the double effect of being a diffuser for artificial lighting and a diffuser fornatural light thereby helping to save energy.

Paralite Mega is always supplied assembled.

A wide range of finishes on either pre-painted or post-painted aluminum is available in the RAL,NCS, PANTONE and SIKKENS colours.

PARALITE MEGA

h

ba


Paralite Mega

a b h100 100 100150 150 100200 200 100250 250 100


P-01 Connection Bracket (Paralite Mega) piece 8.00A-05 Panel Suspension Hook piece 5.56A-06 Tube m 0.80DST-01 Hanger Wire piece 1.40HDVC/4 Double Spring piece 0.70

A-01PM

40

COLOUR OPTIONS

Offers creativesolutions for alldimensions that formthe space

42

Offering high qualitysolutions to all interiordimensions

Offering high qualitysolutions to all interiordimensions

44

Integra offers wide range of highqual i ty products through i tsextensive line of design alternativesand options incorporation the Tile,Plank, Open Cell, Expanded andfully customised ceiling systems,all of which can be supplied indifferent shapes, colours and sizes.

45

Better quality in livingand working spacesBetter quality in livingand working spaces

03/1

0

OPEN CELL

METAL CEILING SYSTEMS

Rak 22 - 1551 NA WestzaanPostbus 2067 - 1500 GB ZaandamTel. +31 (0)75 614 87 22Fax. +31 (0)75 670 14 97Internet : www.metalenplafonds.nlE-mail : [email protected]

INTEGRA METAL CEILING SYSTEMS B.V.

METAL CEILING SYSTEMS

Documents

Transcript of METAL CEILING SYSTEMS