META-MECHANICS INSPIRED BY JEAN TINGUELY SWISS SCULPT0R WORKED IN FRANCE 1925- 1975.
-
Upload
magnus-garrison -
Category
Documents
-
view
215 -
download
0
Transcript of META-MECHANICS INSPIRED BY JEAN TINGUELY SWISS SCULPT0R WORKED IN FRANCE 1925- 1975.
null
4007174
META-MECHANICS INSPIRED BY JEAN TINGUELY
SWISS SCULPT0R
WORKED IN FRANCE
1925- 1975
TINGUELY PAINTINGS
TINGUELY META-MECHANIC SCULPTURES
600 BLACK DOTS
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-
META-MECHANICS INSPIRED BY JEAN TINGUELY
SWISS SCULPT0R
WORKED IN FRANCE
1925- 1975
TINGUELY PAINTINGS
TINGUELY META-MECHANIC SCULPTURES
600 BLACK DOTS
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-
TINGUELY PAINTINGS
TINGUELY META-MECHANIC SCULPTURES
600 BLACK DOTS
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-
TINGUELY META-MECHANIC SCULPTURES
600 BLACK DOTS
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-
600 BLACK DOTS
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-
NOW LETS MAKE ARE OWN KINETIC ARTbull Step 1 Draw your background using crayon on black paper
bull Must USE two different types of line
bull Must USE two different types of shapes
Step 2 Glue your background to your cardboard
Step 3 Glue your black stick across the top of your black paper mounted on the cardboard (Use Glue Gun)
Step 4 Glue your 4 larger flatter found metal pieces on to your background (Use Glue Gun)
Step 5 Using the metal wire construct two types of lines zigzag waves spirals etc and glue on to your background
Step 6 Tie a string to one of your four remaining objects Lay it over the background with the hanging metal touching a glued down metal Now carefully wrap the string over the stick and down the back of your work Take a piece of duck tape and tape it down Cut off the extra string and repeat
Step 7 Once all pieces are attached Put a dot of glue where the string touches the wood stick and where the string is noted on your found metal object (Just a little bit of glue)
- Slide 1
- Meta-Mechanics inspired by Jean Tinguely
- Slide 3
- Tinguely Paintings
- Tinguely Meta-Mechanic sculptures
- Slide 6
- 600 Black Dots
- Now lets make are own Kinetic Art
-