Mesh Tray (Performa - Schneider
Transcript of Mesh Tray (Performa - Schneider
Flexible solution for the routing of cablesProduct catalogue 2010
Performa mesh trays
2
Performa
3
The high performance range of mesh trays
• Exclusive design with double transversal wires for outstanding working-load
• Exclusive patented solution for safety edges
• Complete range of screw-less accessories
• Accessories for direction changes made directly on site
4
PerformaPerforma is one the most fl exible solutions in the market for the routing of cables in light-
and medium-duty installations.
The four different fi nishes make it easy to chose the right alternative for all environments
and applications in commercial buildings, industries and infrastructure.
Thanks to the patented design of double transversal wires, Performa mesh trays comply
with all safety requirements for installers and cables; in addition, it gives higher safe
working-load values as compared to any other product in the market.
The smart and screw-less accessories cover all needs and they are all
very easy and quick to use.
P11
2720
Protection and identifi cationThe Performa mesh trays are delivered with a protective transparent plastic fi lm. Forget about dust and humidity! Each mesh tray also has a colour code for easy identifi cation of the surface treatment (see page 6).
Save time and moneyThe main part of our accessories are screw-less. And no tools are needed. Simple and effi cient!
Surface treatments for all needsElectro-zinc. Bi-chromate. Hot-dip galvanized. Or maybe stainless steel? Performa can be used in all environments.
Complete range of accessoriesTo fulfi l any project specifi cation, to handle any building constraint on site, and to provide solutions for any kind of application or environment.
European Standard ApprovalE-90 classifi ed for fi re resistance, IEC 61537, IK 10 classifi ed, CE marked, ISO 9001.
Several heights and widthsChoose between three heights and nine widths. Use the 35 mm height if the space is limited. Use 70 mm if you need more cable capacity. The 105 mm height gives you an outstanding cable capacity.
x8
x3
P11
2481
P11
2719
P11
2480
P11
2721
P11
2466
P11
2472
P11
2514
E-90ISO 9001
5
Strength. Flexibility. Simplicity
Safety edgesThe patented design of the edges eliminates the risk of hand injuries and cable damages.
Double wires for improved working-loadThe double transversal wires give very high mechanical resistance and higher values of safe working-load.
Screw-less accessoriesNo need to order accessories like bends, junctions etc; make them on site instead from length material elements. The double transversal wires give you the possibility to have several cutting points to create quick and safe solutions.
Make your ownaccessories
Fast-fi x coupler for the coupling of straight elements.
Fast-fi xing to fi x mesh trays to profi les 21x41 and 41x41. Direct clipping. Quick and safe.
No need of fi xings. With the fast-fi x brackets you can just pull the mesh tray into the self-locking fl anges.
Very easy to make angles on site. Just cut and bend the mesh tray to the desired angle and use the fast-fi x locking-clips to fi x and secure the wires
Open structure to avoid overheatingThe open structure ensures good ventilation, preventing overheating of the cables.
No matter what the environment is. No matter what the building constraints are. No matter
what the project specifi cations state. No matter what the habits of the installers are.
The Schneider Electric Performa range provides solutions for each application with a
minimum of installation time.
Performa is a strong, fl exible and reliable system for the simplest and fastest cable layout.
P11
2480
P11
2481
P11
2477
P11
2479
P11
2507
P11
2723
P11
2722
P11
2724
6
EZ = Electro-zincBC = Bi-chromateHDG = Hot dip galvanizedSS = Stainless steelPG = Pre-galvanizedAZ = Alu-zincLZ = Lamellar zincPZ = Phosphate zinc
Codifi cations
EZ: Electro-zinc (according to EN 12329-1) is a process that deposits a thin layer of zinc over the steel through an electro-chemical process, with an additional passiva-tion that gives a typical shiny grey colour. The benefi ts of this process are control over zinc thickness and smoother surfaces.BC: Bi-chromate (according to 12329-1) is a process that deposits a thin layer of zinc over the steel through an electro-chemical process, with an additional passivation that gives a typical yellow colour. The benefi ts of this process are control over zinc thickness and smoother surfaces. HDG: Hot dip galvanisation (EN ISO 1461) is the process of coating steel with a zinc layer, by passing the steel through a molten bath of zinc at a temperature of more than 400 °C. The result is a surface treatment that protects the steel from environ-mental elements. SS: Stainless steel AISI 304 (EN 10088-2) offers a high resistance to aggressive atmospheres. The pickling and passivation processes taking place after manufactur-ing improve the degree of protection of the steel. PG: Pre-galvanized steel (EN 10346) is carbon steel that has gone through a zinc bath just after rolling. Good protection against oxidation and rust.AZ: The composition of the Alu-zinc alloy coating is aluminium and zinc. The coating is applied by means of a continuous hot dip galvanising process. LZ: Lamellar zinc is a zinc and aluminium coating with a degree of resistance to severe atmosphere comparable to that of hot dip galvanised steel. It is used for small items to achieve a smooth surface.PZ: Phosphate zinc coating is applied when increased corrosion resistance is required.
Recommended
Possible to a certain extent. In case of doubt, please contact Schneider Electric.
Surface treatments for all environments
Electro-zinc EZ
Bi-chromate BC
Hot dip galvanized
HDG
Stainless steel SS
Indoor installations, not aggressive atmosphere (offi ce building, commercial malls)
Indoor installations, aggressive atmosphere, tunnels, underground
Outdoor installation, urban location
Chemical industries, acid and alkaline atmosphere
Harbours, marines, water treatment
Food industry
Atmosphere with halogen
7
ContentsOverall View Of The Performa SystemWall and fl oor-mounted solutions .......................................8Ceiling suspended solutions .......10
Choice guide Electro-zinc ................................12Bi-chromate ................................18Hot dip galvanized .....................24Stainless steel ...........................30
RangeElectro-zinc, Bi-chromate ...........34Hot-dip galvanized, stainless steel .............................42
Technical descriptionDesign and dimensions ..............50Safe working load .......................51Admissible work load on brackets ......................................52How to cut the mesh trays ..........54Coupling of all elements .............54
Instructions for making accessoriesHow to cut to obtain different kind of angles .............................55Large Radius fl at bends..............56Right angle fl at bends .................57T junction (90˚ radius) .................58Reducer ......................................59Raisers .......................................60
Performa mesh trays
ISC01459_11-2010_EN 8
Overall system viewWall and fl oor-mounted solutions
Performa mesh trays
ISC01459_11-2010_EN 9
Overall system viewWall and fl oor-mounted solutions
Pages*
Components EZ BC HDG SS
1. Mesh tray 34 34 42 42
2. Horizontal bracket set 36 36
3. Pendant bracket + U profi le 37 37 44, 45 44, 45
4. Horizontal bracket Omega 36 36
5. Coupler 35 35 43 43
6. Side coupler 35 35 43 43
7.Fast coupler 70 + 105 35 35 43
8. Locking clip for fl at bends 40 40 48
9. Horizontal bracket 36 36 44 44
10. Spring nut + profi le 2121/4141 39, 40 39, 40
11. Fast fi x horizontal bracket 35 35
12. Cable drop out 41 41 49
13. Fast fi x divider 34 34 42 42
14. Vertical/Suspended/Floor bracket 36 36 44 44
15. ID label 41 41 49 49
16. Support for box + bracket 36 36 44 44
17. Insulating fl oor support 39 39 47 47
18. Vertical/Suspended/Floor bracket 39 39 47 47
19. Adjustable bracket set 37 37
* The accessories are related to the surface treatment of the mesh trays they go with. For detailed information, please refer to the Choice guide sections.
Performa mesh trays
ISC01459_11-2010_EN 10
Overall View Of The Performa SystemCeiling suspended solutions
Performa mesh trays
ISC01459_11-2010_EN 11
Overall View Of The Performa SystemCeiling suspended solutions
Pages*
Components EZ BC HDG SS
1. Ceiling bracket Omega 38 38
2. Vertical/Suspended/Floor bracket 37 37 45 46
3. Beam clamp 40 40
4. Profi le fast fi xing + Profi le 21x41/41x41 40 40 48
5. Pendant bracket 39 39 47 47
6. Swivel support + U profi le 39 39 46 46
7. Extendable joint 35 35 43 43
8. Cover fi xing 35, 41 35, 41 43, 48
9. Cover 35 35 43 43
10. Fast fi x suspended bracket 37 37 45
11. Support for box/bracket 41 41 48 48
12. Fast fi x hanger 35 38 38 46
13. Central suspension support 38 38 46 46
14. ID label 41 41 49 49
15. C shape support 38 38 46 46
16. take-off plate 41 41
17. Earthing clamp 41 41 49 49
18. L shape support 38 38 46 46
* The accessories are related to the surface treatment of the mesh trays they go with. For detailed information, please refer to the Choice guide sections.
Performa mesh trays
ISC01459_11-2010_EN 12
Choice guide Electro-zinc
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cable Tray
CSU4511050 4511110 4511115 4511120 4511130 4511206
Dividers
Fast-fi x dividers 4571510 4571510 4571510 4571510
Bolted dividers 4561120 4721730 4721730 4721730 4721730
Cover
Cover 4541110 4541115 4541120 4541130 4541106
Cover fi xing 4530800 4530800 4530800 4530800 4530800
Couplers
Fast coupler 4530135 4530135 4530135 4530135 4530135 4530200
BoltedCoupler
4561110 4561110 4561110 4561110 4561110 4561110
Side coupler 4561200 4561200 4561200 4561200 4561205
Extandablejoint
4561150 4561150 4561150 4561150 4561150 4561150
Wall supportFast-fi xhorizontal bracket
4550110 4550111 4550112 4550113 –
Horizontal brackets
4561120 4551110 4551115 4551120 4551130 –
Horizontalbracket s Ω
4561120 4550310 4550315 4550320 4550330 –
Horizontal bracket sets
4561120 4551210 4551215 4551220 4551230 –
Vertical/Suspended/ Floor bracket *
4561120 4551310* 4551315* 4551320* 4551330* –
Fast-fi x hanger
455146745514704551480
4530400 4530400 4530400 4530400 4530400 –
Support for box + bracket *
– – – – 4571120*
Adjustable bracket set
4561120 4551510 4551515 4551520 4551530 –
Pendant bracket + U profi le
4561120 45711104551910
+4551420
4551915+
4551420
4551920+
4551420
4551930+
4551420–
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
ISC01459_11-2010_EN 13
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4511210 4511215 4511220 4511230 4511240 4511250 4511260 4511320 4511330 4511340 4511350 4511360
4571520 4571520 4571520 4571520 4571520 4571520 4571520 4571530 4571530 4571530 4571530 4571530
4721760 4721760 4721760 4721760 4721760 4721760 4721760 4721780 4721780 4721780 4721780 4721780
4541110 4541115 4541120 4541130 4541140 4541150 4541160 4541120 4541130 4541140 4541150 4541160
4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 453800
4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200
4561110 4561110 4561110 4561110 4561110 4561110 4561110 4561110 4561110 4561110 4561110 4561110
4561205 4561205 4561205 4561205 4561205 4561205 4561205 4561205 4561205 4561205 4561205 4561205
4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150
4550110 4550111 4550112 4550113 4550114 4550115 4550116 4550112 4550113 4550114 4550115 4550116
4551110 4551115 4551120 4551130 4551140 4551150 4551160 4551120 4551130 4551140 4551150 4551160
4550310 4550315 4550320 4550330 – – – 4550320 4550330 – – –
4551210 4551215 4551220 4551230 4551240 4551250 4551260 4551220 4551230 4551240 4551250 4551260
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
– – – – – – – – – – – –
– – – – – – – – – – – –
4551510 4551515 4551520 4551530 4551540 4551550 4551560 4551520 4551530 4551540 4551550 4551560
4551910+
4551420
4551915+
4551420
4551920+
4551420
4551930+
4551420
4551940+
4551420
4551950+
4551420
4551960+
4551420
4551920+
4551420
4551930+
4551420
4551940+
4551420
4551950+
4551420
4551960+
4551420
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 14
Choice guide Electro-zinc
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Ceiling support
Fast-fi x suspendedbrackets
45514704551480 4721912** 4530510 4530510 4530520 4530530 –
Fast-fi x suspendedbrackets
45514704551480 4721912
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
–
Vertical/Suspended/ Floor bracket *
4561120455146745514704551480
4551310* 4551315* 4551320* 4551330* –
Ceiling bracket Ω
4561120 4550410 4550415 4550420 4550430 –
Heavy duty suspendedbracket
4561120455146745514704551480
– – 4551620 4551630 –
Centralsuspension support
455146745514704551480
4551430 – 4551430 4551430 –
Fast-fi x hanger
455146745514704551480
4530400 4530400 4530400 4530400 4530400 –
Support for box + bracket*
455146745514704551480
– – – – 4571120*
Support for box + bracket double*
455146745514704551480
– – – – –
“C” Shape support
455146745514704551480
4551440 4551440 4551440 4551440 4551440 4551440
“L” shape support
455146745514704551480
4551450 4551450 4551450 4551450 4551450 4551450
Pendant bracket + U profi le + swivel support
4561120 45711104551910+4551410+4551420
4551915+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
–
Floor support
Insulating fl oor bracket
4571700 4571700 4571700 4571700 –
Vertical/Suspended/ Floor bracket*
4561120 4551310* 4551315* 4551320* 4551330* –
Fixing accessories
Fixings 4561120 4561120 4561120 4561120 4561120 4561120
Locking clip for fl at bends
4530900 4530900 4530900 4530900 4530900
Profi le fast fi xing+Profi les 2141/4141
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530100+
2511230/2511231
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support). **) Use bolts to fix fast-fix suspended brackets marked ** back to back.
ISC01459_11-2010_EN 15
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4530510 4530510 4530520 4530530 4530540** 4530550** 4530560** 4530520 4530530 4530540** 4530550** 4530560**
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
4550410 4550415 4550420 4550430 – – – 4550420 4550430 – – –
– – 4551620 4551630 4551640 4551650 4551660 4551620 4551630 4551640 4551650 4551660
4551430 – 4551430 4551430 – – – 4551430 4551430 – – –
– – – – – – – – – – – –
4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* – – – – –
– – – – – – – 4571130* 4571130* 4571130* 4571130* 4571130*
4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440
4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450
4551910+4551410+4551420
4551915+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
4551940+4551410+4551420
4551950+4551410+4551420
4551960+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
4551940+4551410+4551420
4551950+4551410+4551420
4551960+4551410+4551420
4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
4561120 4561120 4561120 4561120 4561120 4561120 4561120 4561120 4561120 4561120 4561120 4561120
4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 16
Choice guide Electro-zinc
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cabling supports
Support for box + bracket*
– – – – 4571120*
Support for box + bracket double*
– – – – 4571130*
Take-off plate – – – – 4571315
Cable drop-out 4530700 4530700 4530700 4530700 –
Mounting accessories
Earthing clamp 4571310 4571310 4571310 4571310 4571310 4571310
ID label 4551485 4551485 4551485 4551485 4551485 4551485
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
Others (fi xings) Ref. No Complementary accessories
Mounting profi les
Perforatedprofi les
2511230
2521706*252170825217102521716*25217182521720
4721912
*To be used together
2511231
2521706*252170825217102521726*25217282521730
4571110*
*To be used together
Perforatedprofi les
25112042511220
1506150*1506155 4721912
*To be used together
2511240
Bolts
Bolt 47219124571110
Pinbolt
4571115
Others (ceiling support)
Ref. No Complementary accessories
Beam clamps
Beam clamp
4571408 45514704551480
4571410
Beam clamp horizontal
4571416 4551467
4571418 45514704551480
Beam clamp vertical
4571436 4551467
4571438 45514704551480
Threaded rods
Threaded rods
4551467 4551481
45514704551480 4551482
Others Ref. NoOther accessories
Bolt cropper
4580110
Spray paint
4580130
ISC01459_11-2010_EN 17
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120*
4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130*
4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315
4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700
4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310
4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 18
Choice guideBi-chromate
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cable Tray
CSU4516050 4516110 4516115 4516120 4516130 4516206
Dividers
Fast-fi x dividers 4571510 4571510 4571510 4571510
Bolted dividers 4566120 4721730 4721730 4721730 4721730
Cover
Cover 4541110 4541115 4541120 4541130 4541106
Cover fi xing 4530800 4530800 4530800 4530800 4530800
Couplers
Fast coupler 4530135 4530135 4530135 4530135 4530135 4530200
BoltedCoupler
4566110 4566110 4566110 4566110 4566110 4566110
Side coupler 4566200 4566200 4566200 4566200 4566205
Extandablejoint
4561150 4561150 4561150 4561150 4561150 4561150
Wall supportFast-fi xhorizontal bracket
4550110 4550111 4550112 4550113 –
Horizontal brackets
4566120 4551110 4551115 4551120 4551130 –
Horizontalbracket s Ω
4566120 4550310 4550315 4550320 4550330 –
Horizontal bracket sets
4566120 4551210 4551215 4551220 4551230 –
Vertical/Suspended/ Floor bracket *
4566120 4551310* 4551315* 4551320* 4551330* –
Fast-fi x hanger
455146745514704551480
4530400 4530400 4530400 4530400 4530400 –
Support for box + bracket *
– – – – 4571120*
Adjustable bracket set
4566120 4551510 4551515 4551520 4551530 –
Pendant bracket + U profi le
4566120 45761104551910
+4551420
4551915+
4551420
4551920+
4551420
4551930+
4551420–
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
ISC01459_11-2010_EN 19
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4516210 4516215 4516220 4516230 4516240 4516250 4516260 4516320 4516330 4516340 4516350 4516360
4571520 4571520 4571520 4571520 4571520 4571520 4571520 4571530 4571530 4571530 4571530 4571530
4721760 4721760 4721760 4721760 4721760 4721760 4721760 4721780 4721780 4721780 4721780 4721780
4541110 4541115 4541120 4541130 4541140 4541150 4541160 4541120 4541130 4541140 4541150 4541160
4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800 4530800
4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200 4530200
4566110 4566110 4566110 4566110 4566110 4566110 4566110 4566110 4566110 4566110 4566110 4566110
4566205 4566205 4566205 4566205 4566205 4566205 4566205 4566205 4566205 4566205 4566205 4566205
4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150 4561150
4550110 4550111 4550112 4550113 4550114 4550115 4550116 4550112 4550113 4550114 4550115 4550116
4551110 4551115 4551120 4551130 4551140 4551150 4551160 4551120 4551130 4551140 4551150 4551160
4550310 4550315 4550320 4550330 – – – 4550320 4550330 – – –
4551210 4551215 4551220 4551230 4551240 4551250 4551260 4551220 4551230 4551240 4551250 4551260
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
– – – – – – – – – – – –
– – – – – – – – – – – –
4551510 4551515 4551520 4551530 4551540 4551550 4551560 4551520 4551530 4551540 4551550 4551560
4551910+
4551420
4551915+
4551420
4551920+
4551420
4551930+
4551420
4551940+
4551420
4551950+
4551420
4551960+
4551420
4551920+
4551420
4551930+
4551420
4551940+
4551420
4551950+
4551420
4551960+
4551420
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 20
Choice guideBi-chromate
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Ceiling support
Fast-fi x suspendedbrackets
45514704551480 4721912** 4530510 4530510 4530520 4530530 –
Fast-fi x suspendedbrackets
45514704551480 4721912
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
–
Vertical/Suspended/ Floor bracket *
4566120455146745514704551480
4551310* 4551315* 4551320* 4551330* –
Ceiling bracket Ω
4566120 4550410 4550415 4550420 4550430 –
Heavy duty suspendedbracket
4566120455146745514704551480
– – 4551620 4551630 –
Centralsuspension support
455146745514704551480
4556430 – 4556430 4556430 –
Fast-fi x hanger
455146745514704551480
4530400 4530400 4530400 4530400 4530400 –
Support for box + bracket*
455146745514704551480
– – – – 4571120*
Support for box + bracket double*
455146745514704551480
– – – – –
“C” Shape support
455146745514704551480
4551440 4551440 4551440 4551440 4551440 4551440
“L” shape support
455146745514704551480
4551450 4551450 4551450 4551450 4551450 4551450
Pendant bracket + U profi le + swivel support
4566120 45761104551910+4551410+4551420
4551915+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
–
Floor support
Insulating fl oor bracket
4571700 4571700 4571700 4571700 –
Vertical/Suspended/ Floor bracket*
4566120 4551310* 4551315* 4551320* 4551330* –
Fixing accessories
Fixings 4566120 4566120 4566120 4566120 4566120 4566120
Locking clip for fl at bends
4530900 4530900 4530900 4530900 4530900
Profi le 2141/4141 + profi lefast fi xings
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530100+
2511230/2511231
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support). **) Use bolts to fix fast-fix suspended brackets marked ** back to back.
ISC01459_11-2010_EN 21
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4530510 4530510 4530520 4530530 4530540** 4530550** 4530560** 4530520 4530530 4530540** 4530550** 4530560**
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
453057045305804530590
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
4550410 4550415 4550420 4550430 – – – 4550420 4550430 – – –
– – 4551620 4551630 4551640 4551650 4551660 4551620 4551630 4551640 4551650 4551660
4556430 – 4556430 4556430 – – – 4556430 4556430 – – –
– – – – – – – – – – – –
4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* – – – – –
– – – – – – – 4571130* 4571130* 4571130* 4571130* 4571130*
4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440 4551440
4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450 4551450
4551910+4551410+4551420
4551915+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
4551940+4551410+4551420
4551950+4551410+4551420
4551960+4551410+4551420
4551920+4551410+4551420
4551930+4551410+4551420
4551940+4551410+4551420
4551950+4551410+4551420
4551960+4551410+4551420
4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700
4551310* 4551315* 4551320* 4551330* 4551340* 4551350* 4551360* 4551320* 4551330* 4551340* 4551350* 4551360*
4566120 4566120 4566120 4566120 4566120 4566120 4566120 4566120 4566120 4566120 4566120 4566120
4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900 4530900
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
4530300+
2511230/2511231
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 22
Choice guideBi-chromate
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cabling supports
Support for box + bracket*
– – – – 4571120*
Support for box + bracket double*
– – – – 4571130*
Take-off plate – – – – 4571315
Cable drop-out 4530700 4530700 4530700 4530700 –
Mounting accessories
Earthing clamp 4571310 4571310 4571310 4571310 4571310 4571310
ID label 4551485 4551485 4551485 4551485 4551485 4551485
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
Others (fi xings) Ref. No Complementary accessories
Mounting profi les
Perforatedprofi les
2511230
2521706*252170825217102521716*25217182521720
4721912
*To be used together
2511231
2521706*252170825217102521726*25217282521730
4576110*
*To be used together
Perforatedprofi les
25112042511220
1506150*1506155 4721912
*To be used together
2511240
Bolts
Bolt 47219124576110
Pinbolt
4571115
Others (ceiling support)
Ref. No Complementary accessories
Beam clamps
Beam clamp
45 71 408 45 51 47045 51 480
45 71 410
Beam clamp horizontal
45 71 416 45 51 467
45 71 418 45 51 47045 51 480
Beam clamp vertical
45 71 436 45 51 467
45 71 438 45 51 47045 51 480
Threaded rods
Threaded rods
45 51 467 45 51 481
45 51 47045 51 480 45 51 482
Others Ref. NoOther accessories
Bolt cropper
4580110
Spray paint
4580131
ISC01459_11-2010_EN 23
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120* 4571120*
4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130* 4571130*
4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315 4571315
4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700 4530700
4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310
4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 24
Choice guideHot dip galvanized
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cable Tray
CSU4512050 4512110 4512115 4512120 4512130 4512206
Dividers
Fast-fi x dividers 4572510 4572510 4572510 4572510
Bolted dividers 4562120 4722730 4722730 4722730 4722730
Cover
Cover 4542110 4542115 4542120 4542130 4542106
Cover fi xing 4532800 4532800 4532800 4532800 4532800
Couplers
Fast coupler 4532135 4532135 4532135 4532135 4532135 4532200
BoltedCoupler
4562110 4562110 4562110 4562110 4562110 4562110
Side coupler 4562200 4562200 4562200 4562200 4562205
Wall supportFast-fi xhorizontal bracket
4562120 4552110 4552115 4552120 4552130 –
Vertical/Suspended/ Floor bracket*
4562120 4552310* 4552315* 4552320* 4552330* –
Fast-fi x hanger
455146745514704551480
4530400 4530400 4530400 4530400 4530400 –
Support for box + bracket *
– – – – 4575120*
Pendant bracket + U profi le
4562120 45721104552910
+4552420
4552915+
4552420
4552920+
4552420
4552930+
4552420–
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
ISC01459_11-2010_EN 25
70x100 70x150 75x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4512210 4512215 4512220 4512230 4512240 4512250 4512260 4512320 4512330 4512340 4512350 4512360
4572520 4572520 4572520 4572520 4572520 4572520 4572520 4572530 4572530 4572530 4572530 4572530
4722760 4722760 4722760 4722760 4722760 4722760 4722760 4722780 4722780 4722780 4722780 4722780
4542110 4542115 4542120 4542130 4542140 4542150 4542160 4542120 4542130 4542140 4542150 4542160
4532800 4532800 4532800 4532800 4532800 4532800 4532800 4532800 4532800 4532800 4532800 4532800
4532200 4532200 4532200 4532200 4532200 4532200 4532200 4532200 4532200 4532200 4532200 4532200
4562110 4562110 4562110 4562110 4562110 4562110 4562110 4562110 4562110 4562110 4562110 4562110
4562205 4562205 4562205 4562205 4562205 4562205 4562205 4562205 4562205 4562205 4562205 4562205
4552110 4552115 4552120 4552130 4552140 4552150 4552160 4552120 4552130 4552140 4552150 4552160
4552310* 4552315* 4552320* 4552330* 4552340* 4552350* 4552360* 4552320* 4552330* 4552340* 4552350* 4552360*
– – – – – – – – – – – –
– – – – – – – – – – – –
4552910+
4552420
4552915+
4552420
4552920+
4552420
4552930+
4552420
4552940+
4552420
4552950+
4552420
4552960+
4552420
4552920+
4552420
4552930+
4552420
4552940+
4552420
4552950+
4552420
4552960+
4552420
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 26
Choice guideHot dip galvanized
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Ceiling support
Fast fi x suspended brackets
45554704555480 4722912** 4532510 4532510 4532520 4532530 –
Fast-fi x suspendedbrackets
45554704555480 4722912
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
–
Vertical/Suspended/ Floor bracket *
4562120 45554704555480 4552310* 4552315* 4552320* 4552330* –
Centralsuspension support
45554704555480 4552430 – 4552430 4552430 –
Fast-fi x hanger
45554704555480 4532400 4532400 4532400 4532400 4532400 –
Support for box + bracket *
45554704555480 – – – – 4575120*
Support for box + bracket double*
45554704555480 – – – – –
“C” Shape support
45554704555480 4552440 4552440 4552440 4552440 4552440 4552440
“L” shape support
45554704555480 4552450 4552450 4552450 4552450 4552450 4552450
Pendant bracket + U profi le + swivel support
4562120 45721104552910+4552410+4552420
4552915+4552410+4552420
4552920+4552410+4552420
4552930+4552410+4552420
–
Floor support
Insulating fl oor bracket
4571700 4571700 4571700 4571700 –
Vertical/Suspended/ Floor bracket *
4561120 4552310* 4552315* 4552320* 4552330* –
Fixing accessories
Fixings 4562120 4562120 4562120 4562120 4562120 4562120
Locking clip for fl at bends
4532900 4532900 4532900 4532900 4532900
Profi le fast fi xing 4532300 4532300 4532300 4532300 4532100
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support). **) Use bolts to fix fast-fix suspended brackets marked ** back to back.
ISC01459_11-2010_EN 27
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4532510 4532510 4532520 4532530 4532540** 4532550** 4532560** 4532520 4532530 4532540** 4532550** 4532560**
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
453257045325804532590
4552310* 4552315* 4552320* 4552330* 4552340* 4552350* 4552360* 4552320* 4552330* 4552340* 4552350* 4552360*
4552430 – 4552430 4552430 – – – 4552430 4552430 – – –
– – – – – – – – – – – –
4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* – – – – –
– – – – – – – 4575130* 4575130* 4575130* 4575130* 4575130*
4552440 4552440 4552440 4552440 4552440 4552440 4552440 4552440 4552440 4552440 4552440 4552440
4552450 4552450 4552450 4552450 4552450 4552450 4552450 4552450 4552450 4552450 4552450 4552450
4552910+4552410+4552420
4552915+4552410+4552420
4552920+4552410+4552420
4552930+4552410+4552420
4552940+4552410+4552420
4552950+4552410+4552420
4552960+4552410+4552420
4552920+4552410+4552420
4552930+4552410+4552420
4552940+4552410+4552420
4552950+4552410+4552420
4552960+4552410+4552420
4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700
4552310* 4552315* 4552320* 4552330* 4552340* 4552350* 4552360* 4552320* 4552330* 4552340* 4552350* 4552360*
4562120 4562120 4562120 4562120 4562120 4562120 4562120 4562120 4562120 4562120 4562120 4562120
4532900 4532900 4532900 4532900 4532900 4532900 4532900 4532900 4532900 4532900 4532900 4532900
4532300 4532300 4532300 4532300 4532300 4532300 4532300 4532300 4532300 4532300 4532300 4532300
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 28
Choice guideHot dip galvanized
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cabling supports
Support for box + bracket
– – – – 4575120*
Support for box + bracket double
– – – – 4575130
Cable drop-out 4532700 4532700 4532700 4532700 –
Mounting accessories
Earthing clamp 4571310 4571310 4571310 4571310 4571310 4571310
ID label 4551485 4551485 4551485 4551485 4551485 4551485
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
Others (fi xings) Ref. NoBolts
Bolt 47229124572110
Pinbolt
4575115
Bolt cropper
4580110
ISC01459_11-2010_EN 29
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120*
4575130 4575130 4575130 4575130 4575130 4575130 4575130 4575130* 4575130* 4575130* 4575130* 4575130*
4532700 4532700 4532700 4532700 4532700 4532700 4532700 4532700 4532700 4532700 4532700 4532700
4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310
4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 30
Choice guideStainless steel
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Cable Tray
CSU4515050 4515110 4515115 4515120 4515130 4515206
Dividers
Fast-fi x dividers 4575510 4575510 4575510 4575510
Cover
Cover 4545110 4545115 4545120 4545130 4545106
Couplers
BoltedCoupler
4565110 4565110 4565110 4565110 4565110 4565110
Side coupler 4565200 4565200 4565200 4565200 4565205
Extandablejoint
4565150 4565150 4565150 4565150 4565150 4565150
Wall support
Horizontal bracket
4565120 4555110 4555115 4555120 4555130 –
Vertical/Suspended/ Floor bracket*
4565120 4555310* 4555315* 4555320* 4555330* –
Support for box + bracket *
– – – – 4575120*
Pendant bracket + U profi le
4565120 45751104555910
+4555420
4555915+
4555420
4555920+
4555420
4555930+
4555420–
Ceiling support
Vertical/Suspended/ Floor bracket*
4565120 45554704555480 4555310* 4555315* 4555320* 4555330* –
Centralsuspension support
45554704555480 4555430 – 4555430 4555430 –
Support for box + bracket *
45554704555480 – – – – 4575120*
Support for box + bracket double*
45554704555480 – – – – –
“C” Shape support
45554704555480 4555440 4555440 4555440 4555440 4555440 4555440
“L” shape support
45554704555480 4555450 4555450 4555450 4555450 4555450 4555450
Pendant bracket + U profi le + swivel support
4565120 45751104555910+4555410+4555420
4555915+4555410+4555420
4555920+4555410+4555420
4555930+4555410+4555420
–
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
ISC01459_11-2010_EN 31
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4515210 4515215 4515220 4515230 4515240 4515250 4515260 4515320 4515330 4515340 4515350 4515360
4575520 4575520 4575520 4575520 4575520 4575520 4575520 4575530 4575530 4575530 4575530 4575530
4545110 4545115 4545120 4545130 4545140 4545150 4545160 4545120 4545130 4545140 4545150 4545160
4565110 4565110 4565110 4565110 4565110 4565110 4565110 4565110 4565110 4565110 4565110 4565110
4565205 4565205 4565205 4565205 4565205 4565205 45625205 4565205 4565205 4565205 4565205 4565205
4565150 4565150 4565150 4565150 4565150 4565150 4565150 4565150 4565150 4565150 4565150 4565150
4555110 4555115 4555120 4555130 4555140 4555150 4555160 4555120 4555130 4555140 4555150 4555160
4555310* 4555315* 4555320* 4555330* 4555340* 4555350* 4555360* 4555320* 4555330* 4555340* 4555350* 4555360*
– – – – – – – – – – – –
4555910+
4555420
4555915+
4555420
4555920+
4555420
4555930+
4555420
4555940+
4555420
4555950+
4555420
4555960+
4555420
4555920+
4555420
4555930+
4555420
4555940+
4555420
4555950+
4555420
4555960+
4555420
4555310* 4555315* 4555320* 4555330* 4555340* 4555350* 4555360* 4555320* 4555330* 4555340* 4555350* 4555360*
4555430 – 4555430 4555430 – – – 4555430 4555430 – – –
4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* – – – – –
– – – – – – – 4575130* 4575130* 4575130* 4575130* 4575130*
4555440 4555440 4555440 4555440 4555440 4555440 4555440 4555440 4555440 4555440 4555440 4555440
4555450 4555450 4555450 4555450 4555450 4555450 4555450 4555450 4555450 4555450 4555450 4555450
4555910+4555410+4555420
4555915+4555410+4555420
4555920+4555410+4555420
4555930+4555410+4555420
4555940+4555410+4555420
4555950+4555410+4555420
4555960+4555410+4555420
4555920+4555410+4555420
4555930+4555410+4555420
4555940+4555410+4555420
4555950+4555410+4555420
4555960+4555410+4555420
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 32
Choice guideStainless steel
W
H
Dimensions (HxW/mm) Complementary accessoriesDimensions (HxW/mm)
35x50 35x100 35x150 35x200 35x300 60x60
Fixing Threaded rod Bolt
Floor support
Insulating fl oor bracket
4571700 4571700 4571700 4571700 –
Vertical/Suspended/ Floor bracket *
4565120 4555310* 4555315* 4555320* 4555330* –
Fixing accessories
Fixings 4565120 4565120 4565120 4565120 4565120 4565120
Cabling supports
Support for box + bracket
– – – – 4575120*
Support for box + bracket double
– – – – 4575130*
Mounting accessories
Earthing clamp 4571310 4571310 4571310 4571310 4571310 4571310
ID label 4565120 4551485 4551485 4551485 4551485 4551485 4551485
*) Same ref.no. used for several applications (e.g. wall-, ceiling-, floor support).
Others (fi xings) Ref. NoBolts
Bolt
472591245751104326605
Pinbolt
4575115
Bolt cropper
4580110
ISC01459_11-2010_EN 33
70x100 70x150 70x200 70x300 70x400 70x500 70x600 105x200 105x300 105x400 105x500 105x600
4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700 4571700
4555310* 4555315* 4555320* 4555330* 4555340* 4555350* 4555360* 4555320* 4555330* 4555340* 4555350* 4555360*
4565120 4565120 4565120 4565120 4565120 4565120 4565120 4565120 4565120 4565120 4565120 4565120
4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120* 4575120*
4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130* 4575130*
4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310 4571310
4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485 4551485
Complementary accessories are needed to complete the installation of the cable trays and the brackets: Fixing: For fi xing the cable tray to the bracket and/or divider to tray. For further details, please refer to the chart “recommended fi xings”. Threaded rods: For ceiling suspended installations, used with supports and brackets Bolts: For fi xing the U-profi le to the swivel support, and/or the pendant bracket to the U-profi le, and/or fast-fi x suspended brackets back-to-back
Performa mesh trays
ISC01459_11-2010_EN 34
RangeElectro-zinc, Bi-chromate
Mesh trays, electro-zinc and bi-chromateType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Mesh trays, electro-zinc
P11
2508 Mesh cable tray, length 3 m. Plastic ID label with Schneider logo, part number, CE-mark and size attached to one side.
Material: Steel, electro-zinc. Mesh tray 35x50 EZ 40/50/3000 24 m CSU4511050Mesh tray 35x100 EZ 40/100/3000 24 m 4511110Mesh tray 35x150 EZ 40/150/3000 12 m 4511115Mesh tray 35x200 EZ 40/200/3000 12 m 4511120Mesh tray 35x300 EZ 40/300/3000 12 m 4511130Mesh tray 60x60 EZ 65/60/3000 24 m 4511206Mesh tray 70x100 EZ 75/100/3000 12 m 4511210Mesh tray 70x150 EZ 75/150/3000 12 m 4511215Mesh tray 70x200 EZ 75/200/3000 6 m 4511220Mesh tray 70x300 EZ 75/300/3000 6 m 4511230Mesh tray 70x400 EZ 75/400/3000 6 m 4511240Mesh tray 70x500 EZ 75/500/3000 6 m 4511250Mesh tray 70x600 EZ 75/600/3000 6 m 4511260Mesh tray 105x200 EZ 110/200/3000 6 m 4511320Mesh tray 105x300 EZ 110/300/3000 6 m 4511330Mesh tray 105x400 EZ 110/400/3000 6 m 4511340Mesh tray 105x500 EZ 110/500/3000 6 m 4511350Mesh tray 105x600 EZ 110/600/3000 6 m 4511360
Mesh trays, bi-chromate
P11
2509 Mesh cable tray, length 3 m. Plastic ID label with Schneider logo, part number, CE-mark and size attached to one side.
Material: Steel, bi-chromate. Mesh tray 35x50 BC 40/50/3000 24 m CSU4516050Mesh tray 35x100 BC 40/100/3000 24 m 4516110Mesh tray 35x150 BC 40/150/3000 12 m 4516115Mesh tray 35x200 BC 40/200/3000 12 m 4516120Mesh tray 35x300 BC 40/300/3000 12 m 4516130Mesh tray 60x60 BC 65/60/3000 24 m 4516206Mesh tray 70x100 BC 75/100/3000 12 m 4516210Mesh tray 70x150 BC 75/150/3000 12 m 4516215Mesh tray 70x200 BC 75/200/3000 6 m 4516220Mesh tray 70x300 BC 75/300/3000 6 m 4516230Mesh tray 70x400 BC 75/400/3000 6 m 4516240Mesh tray 70x500 BC 75/500/3000 6 m 4516250Mesh tray 70x600 BC 75/600/3000 6 m 4516260Mesh tray 105x200 BC 110/200/3000 6 m 4516320Mesh tray 105x300 BC 110/300/3000 6 m 4516330Mesh tray 105x400 BC 110/400/3000 6 m 4516340Mesh tray 105x500 BC 110/500/3000 6 m 4516350Mesh tray 105x600 BC 110/600/3000 6 m 4516360
DividersFast-fi x dividers
P11
2510 Fast-fi x divider, length 3 m, 35, 70 and 105 mm high. Fixed to the mesh tray by pulling the fl aps at the bottom of the divider into the
transversal wires. Can be fi xed at any position on the mesh tray. Screw-less.Material: Steel, pre-galvanized. Fast-fi x divider 35 PG 27/16/3000 24 m 4571510Fast-fi x divider 70 PG 57/16/3000 24 m 4571520Fast-fi x divider 105 PG 76/16/3000 24 m 4571530
Bolted dividers
P11
2510 Cable-tray divider, length 2 m, for 35, 70 and 105 mm high mesh trays. Fixed to the mesh tray by bolted fi xings (4561120). With
perforated base.Material: Steel, pre-galvanized. Cable-tray divider 30+35 PG 26/16/2000 20 m 4721730Cable-tray divider 60+70 PG 56/16/2000 20 m 4721760Cable-tray divider 80+105 PG 75/16/2000 20 m 4721780
Performa mesh trays
ISC01459_11-2010_EN 35
RangeElectro-zinc, Bi-chromate
CoversType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Covers for mesh trays
P11
2511 Mesh tray cover, length 2 m. To be fi xed to the mesh tray by folding the pre-formed fl aps, located on every 500 mm on both sides
of the cover.Material: Steel, pre-galvanized. Mesh tray cover 60 PG 20/60/2000 8 m 4541106Mesh tray cover 100 PG 20/100/2000 4 m 4541110Mesh tray cover 150 PG 20/150/2000 4 m 4541115Mesh tray cover 200 PG 20/200/2000 4 m 4541120Mesh tray cover 300 PG 20/300/2000 4 m 4541130Mesh tray cover 400 PG 20/400/2000 4 m 4541140Mesh tray cover 500 PG 20/500/2000 4 m 4541150Mesh tray cover 600 PG 20/600/2000 4 m 4541160
Cover fi xing
P11
2469 Cover fi xing for mesh trays, for extra fi xing of the cover if required (optional). Suitable for all sizes from 60 to 600 mm. Direct
clip-in. Screw-less.Material: Spring steel, electro-zinc.Mesh tray cover fi xing EZ 18/15/32 50 4530800
CouplersFast couplerFast coupler for the coupling of straight elements for 35 mm (2 pcs), 70 mm (2 pcs) and 105 mm (4 pcs) heights. Material: Spring steel, electro-zinc.
P11
2474 Fast coupler 70+105 EZ 10/30/86 30 4530200
P11
2473 Fast coupler 35 EZ 12/25/61 30 4530135
Couplers
P11
2512 Bolted coupler for straight elements on both sides of the mesh tray and as central coupler when required. Also used to form
accessories from straight elements.Material: Steel, electro-zinc or bi-chromate.Coupler EZ 23.5/23.5 50 4561110Coupler BC 23.5/23.5 50 4566110
Side couplers
P11
2513 Side-bolted coupler for the coupling of straight elements. 70+105 also suitable for 60x60 mm mesh tray. Including plate, nut and
bolt.Material: Steel, electro-zinc or bi-chromate.Side coupler 35 EZ 32/—/80 25 4561200Side coupler 35 BC 32/—/80 25 4566200Side coupler 70+105 EZ 46/—/80 25 4561205Side coupler 70+105 BC 46/—/80 25 4566205
Joints
P11
2541 Extendable joint for coupling of straight elements with a distance between them of up to 300 mm. Each unit is supplied with two
bolted couplers.Material: Steel, pre-galvanized.Extendable joint PG 1/17/300 10 4561150
Wall supportFast-fi x horizontal brackets
P11
2514 Fast-fi x bracket for wall-mounted horizontal installations. From 100 to 600 mm width. Mesh trays are fi xed by pulling the wires into the fl aps. Extra fi xing is provided by folding the fl aps with a tool. Screw-less.Material: Steel, pre-galvanized.Fast-fi x horizontal bracket 100 PG 82/42/144 10 4550110Fast-fi x horizontal bracket 150 PG 82/42/194 10 4550111Fast-fi x horizontal bracket 200 PG 82/42/244 10 4550112Fast-fi x horizontal bracket 300 PG 82/42/344 10 4550113Fast-fi x horizontal bracket 400 PG 130/42/444 5 4550114Fast-fi x horizontal bracket 500 PG 130/42/544 5 4550115Fast-fi x horizontal bracket 600 PG 130/42/644 5 4550116
Performa mesh trays
ISC01459_11-2010_EN 36
RangeElectro-zinc, Bi-chromate
Wall supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Horizontal brackets
P11
2515 Horizontal bracket for wall-mounted horizontal installations. From 100 to 600 mm width. Mesh tray to be fi xed to the bracket by
bolted fi xings (4561120).Material: Steel, pre-galvanized. Horizontal bracket 100 PG 82/42/144 10 4551110Horizontal bracket 150 PG 82/42/194 10 4551115Horizontal bracket 200 PG 82/42/244 10 4551120Horizontal bracket 300 PG 82/42/344 10 4551130Horizontal bracket 400 PG 130/42/444 5 4551140Horizontal bracket 500 PG 130/42/544 5 4551150Horizontal bracket 600 PG 130/42/644 5 4551160
Horizontal brackets Ω
P11
2516 Horizontal bracket Omega for wall-mounted installations. From 100 to 300 mm width. Mesh tray fi xed to the bracket by bolted
fi xings (4561120). Supplied with strut. Can be used in combination with Ceiling Bracket Ω 600 PG (CSU4550360) for ceiling suspended installations.Material: Steel, pre-galvanized. Horizontal bracket Ω 100 PG 131/50/150 10 4550310Horizontal bracket Ω 150 PG 131/50/200 10 4550315Horizontal bracket Ω 200 PG 131/50/250 10 4550320Horizontal bracket Ω 300 PG 131/50/350 10 4550330
Horizontal bracket sets
P11
2517 Horizontal bracket set for wall-mounted horizontal installations. From 100 to 600 mm width. One set includes pendant bracket
200 mm U-profi le and four bolts for fi xing of the bracket to the profi le. Mesh tray fi xed to the bracket by bolted fi xings (4561120).Material: Steel, pre-galvanized. Horizontal bracket set 100 PG 200/55/162 2 4551210Horizontal bracket set 150 PG 200/55/212 2 4551215Horizontal bracket set 200 PG 200/55/262 2 4551220Horizontal bracket set 300 PG 200/55/362 2 4551230Horizontal bracket set 400 PG 200/55/462 2 4551240Horizontal bracket set 500 PG 200/55/562 2 4551250Horizontal bracket set 600 PG 200/55/662 2 4551260
Vertically mounted brackets
P11
2520 Bracket for vertical wall-mounted installations. From 100 to 600 mm width. Mesh tray to be fi xed to bracket by bolted fi xings
(4561120).Material: Steel, pre-galvanized. Vertical/suspended/fl oor bracket 100 PG 38/50/185 10 4551310Vertical/suspended/fl oor bracket 150 PG 38/50/235 10 4551315Vertical/suspended/fl oor bracket 200 PG 38/50/285 10 4551320Vertical/suspended/fl oor bracket 300 PG 38/50/385 10 4551330Vertical/suspended/fl oor bracket 400 PG 38/50/485 5 4551340Vertical/suspended/fl oor bracket 500 PG 38/50/585 5 4551350Vertical/suspended/fl oor bracket 600 PG 38/50/685 5 4551360
Wall mounted bracket for 35x50
P11
2475 Fast-fi x hanger to be used in horizontal wall-mounted installations with a 35x50 mm mesh tray. Direct clip-in. No tools required,
screw-less.Material: Spring steel, electro-zinc.Fast-fi x hanger 35 EZ 37/29/54 20 4530400
Wall-mounted bracket for 60x60
P11
2518 Clip-on bracket to be used as horizontal wall bracket for 60x60 mm mesh trays.
Material: Steel, pre-galvanized.Support for box + bracket PG 20/92/72 10 4571120
Performa mesh trays
ISC01459_11-2010_EN 37
RangeElectro-zinc, Bi-chromate
Wall supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Adjustable bracket sets
P11
2519 Adjustable bracket set for wall-mounted installations. From 100 to 600 mm width. One set includes one bracket, one adjustable
support and four screws for fi xing of the bracket to the support. Mesh tray fi xed to the bracket by bolted fi xings (4561120).Material: Steel, pre-galvanized. Adjustable bracket set 100 PG 140/55/162 2 4551510Adjustable bracket set 150 PG 140/55/212 2 4551515Adjustable bracket set 200 PG 140/55/262 2 4551520Adjustable bracket set 300 PG 140/55/362 2 4551530Adjustable bracket set 400 PG 140/55/462 2 4551540Adjustable bracket set 500 PG 140/55/562 2 4551550Adjustable bracket set 600 PG 140/55/662 2 4551560
U-profi le
P11
2529 U-profi le. Fixed to the wall for wall-mounted installations. To be used with pendant brackets.
Material: Steel, pre-galvanized. U-profi le PG 30/55/1000 4 m 4551420
Pendant brackets
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4551420) for wall-mounted installations.
Four bolts (4571110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4561120).Material: Steel, pre-galvanized. Pendant bracket 100 PG 87/50/160 10 4551910Pendant bracket 150 PG 87/50/210 10 4551915Pendant bracket 200 PG 87/50/260 10 4551920Pendant bracket 300 PG 94/50/360 10 4551930Pendant bracket 400 PG 100/50/460 4 4551940Pendant bracket 500 PG 110/50/560 4 4551950Pendant bracket 600 PG 110/50/660 4 4551960
Ceiling supportFast-fi x suspended brackets
P11
2465 Fast-fi x suspended bracket, for ceiling-suspended installations with threaded rods. The mesh tray is fi xed by pulling the wires in
the fl aps, and then folding the fl aps with a tool to fi x the mesh tray. Screw-less. To ensure the values shown in the chart "Admissible working-load on brackets" on page 4 for 400 mm widths and upwards, two brackets must be mounted together back-to-back using bolts (4721912). For the 2000 and 3000 mm widths, the threaded rods should be placed all along the brackets, with a maximum distance between them of 950 mm.Material: Steel, pre-galvanized.Fast-fi x suspended bracket 150 PG 20/40/250 6 4530510Fast-fi x suspended bracket 200 PG 20/40/300 6 4530520Fast-fi x suspended bracket 300 PG 20/40/400 6 4530530Fast-fi x suspended bracket 400 PG 20/40/500 6 4530540Fast-fi x suspended bracket 500 PG 20/40/600 6 4530550Fast-fi x suspended bracket 600 PG 20/40/700 6 4530560Fast-fi x suspended bracket 1000 PG 20/40/1000 2 m 4530570Fast-fi x suspended bracket 2000 PG 20/40/2000 4 m 4530580Fast-fi x suspended bracket 3000 PG 20/40/3000 6 m 4530590
Suspended brackets
P11
2520 Suspension bracket for ceiling-suspended installations with threaded rods. From 100 to 600 mm width. Mesh tray fi xed to the
bracket by bolted fi xings (4561120).Material: Steel, pre-galvanized. Vertical/suspended/fl oor bracket 100 PG 38/50/185 10 4551310Vertical/suspended/fl oor bracket 150 PG 38/50/235 10 4551315Vertical/suspended/fl oor bracket 200 PG 38/50/285 10 4551320Vertical/suspended/fl oor bracket 300 PG 38/50/385 10 4551330Vertical/suspended/fl oor bracket 400 PG 38/50/485 5 4551340Vertical/suspended/fl oor bracket 500 PG 38/50/585 5 4551350Vertical/suspended/fl oor bracket 600 PG 38/50/685 5 4551360
Performa mesh trays
ISC01459_11-2010_EN 38
RangeElectro-zinc, Bi-chromate
Ceiling supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Ceiling brackets Ω
P11
2521 Ceiling bracket Omega for direct fi xing to the ceiling. From 100 to 300 mm witdth. Mesh tray fi xed to the bracket by bolted fi xings
(4561120). Supplied with strut. 600 mm bracket is used as pendant bracket in combination with horizontal hrackets Ω.Material: Steel, pre-galvanized. Ceiling bracket Ω 100 PG 196/50/153 4 4550410Ceiling bracket Ω 150 PG 196/50/204 4 4550415Ceiling bracket Ω 200 PG 196/50/252 4 4550420Ceiling bracket Ω 300 PG 196/50/357 4 4550430Ceiling bracket Ω 600 PG 131/50/610 5 CSU4550360Reinforcement for Ω bracket PG 75/20/20 10 CSU4550365
Heavy-duty suspended brackets
P11
2522 Bracket for ceiling-suspended installations with threaded rods. From 200 to 600 mm width. Mesh tray fi xed to the bracket by
bolted fi xings (4561120).Material: Steel, pre-galvanized.Heavy-duty suspended bracket 200 PG 60/41.7/267.5 4 4551620Heavy-duty suspended bracket 300 PG 60/41.7/347.5 4 4551630Heavy-duty suspended bracket 400 PG 60/41.7/467.5 4 4551640Heavy-duty suspended bracket 500 PG 60/41.7/547.5 4 4551650Heavy-duty suspended bracket 600 PG 60/41.7/667.5 4 4551660
Suspension supports
P11
2523 Central suspension support for ceiling-suspended installations with threaded rods. Hole Ø 8.5 mm. Recommended for mesh
trays up to 300 mm width. Not suitable for 60x60, 35x150 and 70x150 mm mesh trays.Material: Steel, electro-zinc or bi-chromate.Central suspension support EZ 40/4/60 30 4551430Central suspension support BC 40/4/60 30 4556430
Fast-fi x hanger
P11
2475 Fast-fi x hanger for 35 mm high mesh trays. For ceiling-suspended installations with threaded rods. Direct clip-in on one side of
the mesh tray. No tools required, screw-less.Material: Spring steel, electro-zinc.Fast-fi x hanger 35 EZ 37/29/54 20 4530400
Side suspension bracketsClip-on bracket to be used for ceiling-suspended installations of 60, 70 and 105 mm high mesh trays with threaded rods.Material: Steel, pre-galvanized.
P11
2518 Support for box + bracket PG 20/72/92 10 4571120
P11
2506 Support for box + bracket, double, PG 20/100/182 5 4571130
C-shape support
P11
2525 C-shape support for ceiling-suspended installation. To be used together with threaded rods.
Material: Steel, pre-galvanized.C-shape support PG 70/39/36 10 4551440
L-shape support
P11
2524 L-shape support for suspended installations with threaded rods.
Material: Steel, pre-galvanized.L-shape support PG 104/39/36 10 4551450
Threaded rods
P11
2526 Threaded rod for ceiling-suspended installations, used with suspension support and brackets. Supplied with nuts and washers.
Material: Steel, pre-galvanized. Threaded rod M6x1m PG M6/1000 10 4551467Threaded rod M8x0,5m PG M8/500 10 4551470Threaded rod M8x1m PG M8/1000 10 4551480
Performa mesh trays
ISC01459_11-2010_EN 39
RangeElectro-zinc, Bi-chromate
Ceiling supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Rod connectors
P11
2468 Rod connector intended to join two threaded rods in ceiling-suspended installation.
Material: Steel, pre-galvanized. Rod connector M6 PG M6/30 50 4551481Rod connector M8 PG M8/30 50 4551482
Swivel pendant support
P11
2528 Swivel pendant support for ceiling-suspended installations in combination with U-profi le (4551420) and pendant bracket.
Requires four bolts (4571110) for fi xing of the U-profi le.Material: Steel, pre-galvanized. Swivel pendant support PG 116/150/60 4 4551410
U-profi le
P11
2529 U-profi le. For ceiling-suspended installations in combination with swivel pendant support (4551410) and pendant brackets.
Material: Steel, pre-galvanized. U-profi le PG 30/55/1000 4 m 4551420
Pendant brackets, pre-galvanized
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4551420) and swivel pendant support
(4551410) for ceiling-suspended installations. Four bolts (4571110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4561120).Material: Steel, pre-galvanized. Pendant bracket 100 PG 87/50/160 10 4551910Pendant bracket 150 PG 87/50/210 10 4551915Pendant bracket 200 PG 87/50/260 10 4551920Pendant bracket 300 PG 94/50/360 10 4551930Pendant bracket 400 PG 100/50/460 4 4551940Pendant bracket 500 PG 110/50/560 4 4551950Pendant bracket 600 PG 110/50/660 4 4551960
Floor supportInsulating support
P11
2530 Insulating support for fl oor installations. Suitable for all mesh trays except 60x60 mm. The mesh tray is fi xed by clipping wires into
the support. Maximum recommended span between supports: 1 m.Material: PA 6.6, colour black. Insulating fl oor support 45/44.5/85 20 4571700
Floor-mounted brackets
P11
2520 Bracket for fl oor-mounted installations in raised fl oors. The bracket is used as a raiser. Mesh tray fi xed to the bracket by bolted
fi xings (4561120).Material: Steel, pre-galvanized. Vertical/suspended/fl oor bracket 100 PG 38/50/185 10 4551310Vertical/suspended/fl oor bracket 150 PG 38/50/235 10 4551315Vertical/suspended/fl oor bracket 200 PG 38/50/285 10 4551320Vertical/suspended/fl oor bracket 300 PG 38/50/385 10 4551330Vertical/suspended/fl oor bracket 400 PG 38/50/485 5 4551340Vertical/suspended/fl oor bracket 500 PG 38/50/585 5 4551350Vertical/suspended/fl oor bracket 600 PG 38/50/685 5 4551360
Profi lesPerforated profi les
P11
2531 Perforated profi le, wall or ceiling mounted, length 2 m. To be used with reinforced or rectangular nuts for fi xing brackets or
threaded rods. Material: Steel, pre-galvanized or electro-zinc. Perforated profi le 2040 PG 20/40/2000 20 m 2511204Perforated profi le 2040 EZ 20/40/2000 20 m 2511220
P11
2532 Perforated profi le 2141 PG 21/41/2000 8 m 2511230
Perforated profi le 4141 PG 41/41/2000 4 m 2511231Perforated profi le 2350 Ω PG 23/50/2000 4 m 2511240
Performa mesh trays
ISC01459_11-2010_EN 40
RangeElectro-zinc, Bi-chromate
Fixing accessoriesType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Locking clip
P11
2556 Locking clip for fast-fi xing of the transversal wires of a mesh tray, once it has been cut to form fl at bends.
Material: Spring steel, electro-zinc.Locking clip for fl at bend EZ 6/18/21 50 4530900
Profi le fast-fi xingsFast-fi xing intended to fi x mesh trays to profi les 21x41 and 41x41. Specifi c design for 60x60 mm mesh tray. Direct clip-in. No tools required, screw-less. Suitable only for horizontal installations.Material: Spring steel, electro-zinc.
P11
2472 Profi le fast-fi xing EZ 29/51/19 50 4530300
P11
2471 Profi le fast-fi xing 6060 EZ 54/68/34 25 4530100
Fixings
P11
2533 Fixing device for fi xing of the mesh trays to brackets.
Material: Steel, electro-zinc or bi-chromate.Fixing EZ 23.5/23.5 50 4561120Fixing BC 23.5/23.5 50 4566120
Bolts
P11
2534 Bolt for the fi xing of swivel supports and pendant brackets to U-profi le and of brackets to mounting profi les, together with
rectangular or reinforced nuts.Material: Steel, electro-zinc or bi-chromate.Bolt M6x20 EZ 23.5/13.5 50 4571110Bolt M6x20 BC 23.5/13.5 50 4576110Bolt M6x12 EZ 23.5/13.5 50 4721912
P11
2467 Pin-bolt for fast-fi xing of pendant bracket to U-profi le and of U-profi le to swivel support.
Material: Steel, electro-zinc.Pin-bolt M6x70 EZ M6/70 10 4571115
Rectangular nuts
P11
2535 Rectangular nut for the fi xing of brackets to mounting profi les 20x40 using bolts.
Material: Steel, electro-zinc.Rectangular nut M6 20/5/36 100 1506150Rectangular nut M8 20/5/36 100 1506155
Reinforced nuts and spring nutsReinforced nut for the fi xing of brackets and threaded rods to mounting profi les 21x41 and 41x41 using bolts.Material: Steel, electro-zinc.Reinforced nut M6 6/20/35 10 2521706Reinforced nut M8 6/20/35 10 2521708Reinforced nut M10 6/20/35 10 2521710
P11
2536 Reinforced spring nut for the fi xing of brackets and threaded rods to mounting profi les 21x41 and 41x41 using bolts. Short spring
for 21x41 profi le, long for 41x41 profi le.Material: Steel, electro-zinc. Reinforced spring nut, short M6 17/20/35 10 2521716Reinforced spring nut, short M8 17/20/35 10 2521718Reinforced spring nut, short M10 24/20/35 10 2521720Reinforced spring nut, long M6 37/20/35 10 2521726Reinforced spring nut, long M8 37/20/35 10 2521728Reinforced spring nut, long M10 37.5/20/35 10 2521730
Beam clamps
P11
2537 Beam clamp for suspended installations. To be used together with threaded rods M8 or M10.
Material: Steel, electro-zinc.Beam clamp M8 EZ 36/38/18 10 4571408Beam clamp M10 EZ 41.5/44.5/21 10 4571410
Performa mesh trays
ISC01459_11-2010_EN 41
RangeElectro-zinc, Bi-chromate
Fixing accessoriesType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Beam clamps
P11
2538 Beam clamp for suspended installations from the side of a beam. To be used together with threaded rods M6 or M8.
Material: Steel, phosphate zinc. Beam clamp, horizontal M6 PZ 50/46/40 20 4571416Beam clamp, horizontal M8 PZ 50/46/40 20 4571418
P11
2539 Beam clamp for suspended installations from the top of a beam. To be used together with threaded rods M6 or M8.
Material: Steel, phosphate zinc. Beam clamp, vertical M6 PZ 92/33/19 20 4571436Beam clamp, vertical M8 PZ 92/33/19 20 4571438
Cover fi xing
P11
2469 Cover fi xing for mesh trays, for extra fi xing of the cover if required (optional). Suitable for all sizes from 60 to 600 mm. Direct
clip-in. Screw-less.Material: Spring steel, electro-zinc.Mesh tray cover fi xing EZ 18/15/32 50 4530800
Supports for derivation boxClip-on bracket to be used for fi xing of a derivation box in 60, 70 and 105 mm high mesh trays.Material: Steel, pre-galvanized.
P11
2518 Support for box + bracket PG 20/72/92 10 4571120
P11
2506 Support for box + bracket, double, PG 20/100/182 5 4571130
Other accessoriesTake-off plate
P11
2540 Take-off plate for pipes M20, 25 and 32. Fixed to the side of the mesh tray and by folding the fl aps with a screw-driver. Screw-less.
For 60, 70 and 105 mm high trays.Material: Steel, pre-galvanized.Take-off plate M20-25-32 PG 85/146 10 4571315
Cable drop-out
P11
2466 Cable drop-out to be directly clipped-in on all sizes of mesh tray except 60x60 mm. Fixed by folding a fl ap at the bottom with a
screw-driver. Screw-less.Material: Spring steel, electro-zinc.Cable drop-out EZ 50/37/111 10 4530700
Earthing clamp
P11
2470 Earthing clamp for earthing of the installation to comply with safety requirements. Fixed to the wires on the side of the mesh trays.
Admits cables from 16 to 70 mm2.Material: Brass, electrolytical nickel coating.Earthing clamp EZ 85/107/24 10 4571310
Marking
P11
2542 ID-label, blank, suitable for all cable trays. Can be placed on the side or at the bottom of the tray for identifi cation.
Material: PC/ABS. Colour: White.ID-label 30/100 25 4551485
Cutting tool
P11
2543 Bolt cropper for cutting and forming of accessories from straight elements. Suitable for all sizes and fi nishes.
Bolt cropper 130/470 1 4580110
Protective paint
P11
2544 Protective spray paint for protection of cut wires from external agents. Capacity 400 ml.
Protective spray paint EZ — 1 4580130Protective spray paint BC — 1 4580131
Performa mesh trays
ISC01459_11-2010_EN 42
RangeHot-dip galvanized, stainless steel
Mesh trays, hot-dip galvanized and stainless steelType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Mesh trays, hot-dip galvanized
P11
2545 Mesh cable tray, length 3 m. Plastic ID label with Schneider logo, part number, CE-mark and size attached to one side.
Material: Steel, hot-dip galvanized. Mesh tray 35x50 HDG 40/50/3000 24 m CSU4512050Mesh tray 35x100 HDG 40/100/3000 24 m 4512110Mesh tray 35x150 HDG 40/150/3000 12 m 4512115Mesh tray 35x200 HDG 40/200/3000 12 m 4512120Mesh tray 35x300 HDG 40/300/3000 12 m 4512130Mesh tray 60x60 HDG 65/60/3000 24 m 4512206Mesh tray 70x100 HDG 75/100/3000 12 m 4512210Mesh tray 70x150 HDG 75/150/3000 12 m 4512215Mesh tray 70x200 HDG 75/200/3000 6 m 4512220Mesh tray 70x300 HDG 75/300/3000 6 m 4512230Mesh tray 70x400 HDG 75/400/3000 6 m 4512240Mesh tray 70x500 HDG 75/500/3000 6 m 4512250Mesh tray 70x600 HDG 75/600/3000 6 m 4512260Mesh tray 105x200 HDG 110/200/3000 6 m 4512320Mesh tray 105x300 HDG 110/300/3000 6 m 4512330Mesh tray 105x400 HDG 110/400/3000 6 m 4512340Mesh tray 105x500 HDG 110/500/3000 6 m 4512350Mesh tray 105x600 HDG 110/600/3000 6 m 4512360
Mesh trays, stainless steel
P11
2546 Mesh cable tray, length 3 m. Plastic ID label with Schneider logo, part number, CE-mark and size attached to one side.
Material: Stainless steel.Mesh tray 35x50 SS 40/50/3000 24 m CSU4515050Mesh tray 35x100 SS 40/100/3000 24 m 4515110Mesh tray 35x150 SS 40/150/3000 12 m 4515115Mesh tray 35x200 SS 40/200/3000 12 m 4515120Mesh tray 35x300 SS 40/300/3000 12 m 4515130Mesh tray 60x60 SS 65/60/3000 24 m 4515206Mesh tray 70x100 SS 75/100/3000 12 m 4515210Mesh tray 70x150 SS 75/150/3000 12 m 4515215Mesh tray 70x200 SS 75/200/3000 6 m 4515220Mesh tray 70x300 SS 75/300/3000 6 m 4515230Mesh tray 70x400 SS 75/400/3000 6 m 4515240Mesh tray 70x500 SS 75/500/3000 6 m 4515250Mesh tray 70x600 SS 75/600/3000 6 m 4515260Mesh tray 105x200 SS 110/200/3000 6 m 4515320Mesh tray 105x300 SS 110/300/3000 6 m 4515330Mesh tray 105x400 SS 110/400/3000 6 m 4515340Mesh tray 105x500 SS 110/500/3000 6 m 4515350Mesh tray 105x600 SS 110/600/3000 6 m 4515360
DividersFast-fi x dividers
P11
2510 Fast-fi x divider, length 3 m, 35, 70 and 105 mm high. Fixed to the mesh tray by pulling the fl aps at the bottom of the divider into the
transversal wires. Can be fi xed at any position on the mesh tray. Screw-less.Material: Steel, aluzinc or stainless. Fast-fi x divider 35 AZ 27/16/3000 24 m 4572510Fast-fi x divider 70 AZ 57/16/3000 24 m 4572520Fast-fi x divider 105 AZ 76/16/3000 24 m 4572530Fast-fi x divider 35 SS 27/16/3000 24 m 4575510Fast-fi x divider 70 SS 57/16/3000 24 m 4575520Fast-fi x divider 105 SS 76/16/3000 24 m 4575530
Bolted dividers
P11
2510 Cable-tray divider, length 2 m, for 35, 70 and 105 mm high mesh trays. Fixed to the mesh tray by bolted fi xings (4562120). With
perforated base.Material: Steel, hot-dip galvanized. Cable-tray divider 30+35 HDG 26/16/2000 20 m 4722730Cable-tray divider 60+70 HDG 56/16/2000 20 m 4722760Cable-tray divider 80+105 HDG 75/16/2000 20 m 4722780
Performa mesh trays
ISC01459_11-2010_EN 43
RangeHot-dip galvanized, stainless steel
CoversType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Covers for mesh trays, hot-dip galvanized
P11
2511 Mesh tray cover, length 2 m. To be fi xed to the mesh tray by folding the pre-formed fl aps, located on every 500 mm on both sides
of the cover.Material: Steel, hot-dip galvanized. Mesh tray cover 60 HDG 20/60/2000 8 m 4542106Mesh tray cover 100 HDG 20/100/2000 4 m 4542110Mesh tray cover 150 HDG 20/150/2000 4 m 4542115Mesh tray cover 200 HDG 20/200/2000 4 m 4542120Mesh tray cover 300 HDG 20/300/2000 4 m 4542130Mesh tray cover 400 HDG 20/400/2000 4 m 4542140Mesh tray cover 500 HDG 20/500/2000 4 m 4542150Mesh tray cover 600 HDG 20/600/2000 4 m 4542160
Covers for mesh trays, stainless steel
P11
2511 Mesh tray cover, length 2 m. To be fi xed to the mesh tray by folding the pre-formed fl aps, located on every 500 mm on both sides
of the cover.Material: Stainless steel. Mesh tray cover 60 SS 20/60/2000 8 m 4545106Mesh tray cover 100 SS 20/100/2000 4 m 4545110Mesh tray cover 150 SS 20/150/2000 4 m 4545115Mesh tray cover 200 SS 20/200/2000 4 m 4545120Mesh tray cover 300 SS 20/300/2000 4 m 4545130Mesh tray cover 400 SS 20/400/2000 4 m 4545140Mesh tray cover 500 SS 20/500/2000 4 m 4545150Mesh tray cover 600 SS 20/600/2000 4 m 4545160
Cover fi xing
P11
2469 Cover fi xing for mesh trays, for extra fi xing of the cover if required (optional). Suitable for all sizes from 60 to 600 mm. Direct
clip-in. Screw-less.Material: Spring steel, lamellar zinc.Mesh tray cover fi xing LZ 18/15/32 50 4532800
CouplersFast couplerFast coupler for the coupling of straight elements for 35 mm (2 pcs), 70 mm (2 pcs) and 105 mm (4 pcs) heights. Material: Spring steel, lamellar zinc.
P11
2474 Fast coupler 70+105 LZ 10/30/86 30 4532200
P11
2473 Fast coupler 35 LZ 12/25/61 30 4532135
Couplers
P11
2512 Bolted coupler for straight elements on both sides of the mesh tray and as central coupler when required. Also used to form
accessories from straight elements.Material: Steel, hot-dip galvanized or stainless.Coupler HDG 23.5/23.5 50 4562110Coupler SS 23.5/23.5 50 4565110
Side couplers
P11
2513 Side-bolted coupler for the coupling of straight elements. 70+105 also suitable for 60x60 mm mesh tray. Including plate, nut and
bolt.Material: Steel, hot-dip galvanized or stainless.Side coupler 35 HDG 32/—/80 25 4562200Side coupler 35 SS 32/—/80 25 4565200Side coupler 70+105 HDG 46/—/80 25 4562205Side coupler 70+105 SS 46/—/80 25 4565205
Joint
P11
2541 Extendable joint for coupling of elements with a distance between them of up to 300 mm. Each unit is supplied with two bolted
couplers.Material: Stainless steel.Extendable joint SS 1/17/300 10 4565150
Performa mesh trays
ISC01459_11-2010_EN 44
RangeHot-dip galvanized, stainless steel
Wall supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Horizontal brackets, hot-dip galvanized
P11
2515 Horizontal bracket for wall-mounted horizontal installations. From 100 to 600 mm width. Mesh tray to be fi xed to the bracket by
bolted fi xings (4562120).Material: Steel, hot-dip galvanized. Horizontal bracket 100 HDG 82/42/144 10 4552110Horizontal bracket 150 HDG 82/42/194 10 4552115Horizontal bracket 200 HDG 82/42/244 10 4552120Horizontal bracket 300 HDG 82/42/344 10 4552130Horizontal bracket 400 HDG 130/42/444 5 4552140Horizontal bracket 500 HDG 130/42/544 5 4552150Horizontal bracket 600 HDG 130/42/644 5 4552160
Horizontal brackets, stainless steel
P11
2515 Horizontal bracket for wall-mounted horizontal installations. From 100 to 600 mm width. Mesh tray to be fi xed to the bracket by
bolted fi xings (4565120).Material: Stainless steel. Horizontal bracket 100 SS 82/42/144 10 4555110Horizontal bracket 150 SS 82/42/194 10 4555115Horizontal bracket 200 SS 82/42/244 10 4555120Horizontal bracket 300 SS 82/42/344 10 4555130Horizontal bracket 400 SS 130/42/444 5 4555140Horizontal bracket 500 SS 130/42/544 5 4555150Horizontal bracket 600 SS 130/42/644 5 4555160
Vertically mounted brackets, hot-dip galvanized
P11
2520 Bracket for vertical wall-mounted installations. Mesh tray to be fi xed to bracket using bolted fi xings (4562120). From 100 to 600
mm width.Material: Steel, hot-dip galvanized. Vertical/suspended/fl oor bracket 100 HDG 38/50/185 10 4552310Vertical/suspended/fl oor bracket 150 HDG 38/50/235 10 4552315Vertical/suspended/fl oor bracket 200 HDG 38/50/285 10 4552320Vertical/suspended/fl oor bracket 300 HDG 38/50/385 10 4552330Vertical/suspended/fl oor bracket 400 HDG 38/50/485 5 4552340Vertical/suspended/fl oor bracket 500 HDG 38/50/585 5 4552350Vertical/suspended/fl oor bracket 600 HDG 38/50/685 5 4552360
Vertically mounted brackets, stainless steel
P11
2520 Bracket for vertical wall-mounted installations. Mesh tray to be fi xed to bracket using bolted fi xings (4565120). From 100 to 600
mm width.Material: Stainless steel. Vertical/suspended/fl oor bracket 100 SS 38/50/185 10 4555310Vertical/suspended/fl oor bracket 150 SS 38/50/235 10 4555315Vertical/suspended/fl oor bracket 200 SS 38/50/285 10 4555320Vertical/suspended/fl oor bracket 300 SS 38/50/385 10 4555330Vertical/suspended/fl oor bracket 400 SS 38/50/485 5 4555340Vertical/suspended/fl oor bracket 500 SS 38/50/585 5 4555350Vertical/suspended/fl oor bracket 600 SS 38/50/685 5 4555360
Wall-mounted bracket for 6060
P11
2518 Clip-on bracket to be used as horizontal wall bracket for 60x60 mm mesh trays.
Material: Stainless steel. Support for box + bracket SS 20/72/92 10 4575120Support for box + Bracket HDG 20/72/92 10 CSU4572120
U-profi les
P11
2529 U-profi le. Fixed to the wall for wall-mounted installations. To be used with pendant brackets.
Material: Steel, hot-dip galvanized or stainless. U -profi le HDG 30/55/1000 4 m 4552420U-profi le SS 30/55/1000 4 m 4555420
Performa mesh trays
ISC01459_11-2010_EN 45
RangeHot-dip galvanized, stainless steel
Wall supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Pendant brackets, hot-dip galvanized
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4552420) for wall-mounted installations.
Four bolts (4572110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4562120).Material: Steel, hot-dip galvanized. Pendant bracket 100 HDG 87/50/160 10 4552910Pendant bracket 150 HDG 87/50/210 10 4552915Pendant bracket 200 HDG 87/50/260 10 4552920Pendant bracket 300 HDG 94/50/360 10 4552930Pendant bracket 400 HDG 100/50/460 4 4552940Pendant bracket 500 HDG 110/50/560 4 4552950Pendant bracket 600 HDG 110/50/660 4 4552960
Pendant brackets, stainless steel
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4555420) for wall-mounted installations.
Four bolts (4575110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4565120).Material: Stainless steel. Pendant bracket 100 SS 87/50/160 10 4555910Pendant bracket 150 SS 87/50/210 10 4555915Pendant bracket 200 SS 87/50/260 10 4555920Pendant bracket 300 SS 94/50/360 10 4555930Pendant bracket 400 SS 100/50/460 4 4555940Pendant bracket 500 SS 110/50/560 4 4555950Pendant bracket 600 SS 110/50/660 4 4555960
Ceiling supportFast-fi x suspended brackets
P11
2465 Fast-fi x suspended bracket, for ceiling-suspended installations with threaded rods. The mesh tray is fi xed by pulling the wires in
the fl aps, and then folding the fl aps with a tool to fi x the mesh tray. Screw-less. To ensure the values shown in the chart "Admissible working-load on brackets" on page 4 for 400 mm widths and upwards, two brackets must be mounted together back-to-back using bolts (4722912). For the 2000 and 3000 mm widths, the threaded rods should be placed all along the brackets, with a maximum distance between them of 950 mm. Material: Steel, hot-dip galvanized.Fast-fi x suspended bracket 150 HDG 20/40/250 6 4532510Fast-fi x suspended bracket 200 HDG 20/40/300 6 4532520Fast-fi x suspended bracket 300 HDG 20/40/400 6 4532530Fast-fi x suspended bracket 400 HDG 20/40/500 6 4532540Fast-fi x suspended bracket 500 HDG 20/40/600 6 4532550Fast-fi x suspended bracket 600 HDG 20/40/700 6 4532560Fast-fi x suspended bracket 1000 HDG 20/40/1000 2 m 4532570Fast-fi x suspended bracket 2000 HDG 20/40/2000 4 m 4532580Fast-fi x suspended bracket 3000 HDG 20/40/3000 6 m 4532590
Suspended brackets, hot-dip galvanized
P11
2520 Suspension bracket for ceiling-suspended installations with threaded rods. From 100 to 600 mm width. Mesh tray fi xed to the
bracket by bolted fi xings (4562120).Material: Steel, hot-dip galvanized. Vertical/suspended/fl oor bracket 100 HDG 38/50/185 10 4552310Vertical/suspended/fl oor bracket 150 HDG 38/50/235 10 4552315Vertical/suspended/fl oor bracket 200 HDG 38/50/285 10 4552320Vertical/suspended/fl oor bracket 300 HDG 38/50/385 10 4552330Vertical/suspended/fl oor bracket 400 HDG 38/50/485 5 4552340Vertical/suspended/fl oor bracket 500 HDG 38/50/585 5 4552350Vertical/suspended/fl oor bracket 600 HDG 38/50/685 5 4552360
Suspended brackets, stainless steel
P11
2520 Suspension bracket for ceiling-suspended installations with threaded rods. From 100 to 600 mm width. Mesh tray fi xed to the
bracket by bolted fi xings (4565120).Material: Stainless steel. Vertical/suspended/fl oor bracket 100 SS 38/50/185 10 4555310Vertical/suspended/fl oor bracket 150 SS 38/50/235 10 4555315Vertical/suspended/fl oor bracket 200 SS 38/50/285 10 4555320Vertical/suspended/fl oor bracket 300 SS 38/50/385 10 4555330Vertical/suspended/fl oor bracket 400 SS 38/50/485 5 4555340Vertical/suspended/fl oor bracket 500 SS 38/50/585 5 4555350Vertical/suspended/fl oor bracket 600 SS 38/50/685 5 4555360
Performa mesh trays
ISC01459_11-2010_EN 46
RangeHot-dip galvanized, stainless steel
Ceiling supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Suspension supports
P11
2523 Central suspension support for ceiling-suspended installations with threaded rods. Hole Ø 8.5 mm. Recommended for mesh
trays up to 300 mm width. Not suitable for 60x60, 35x150 and 70x150 mm mesh trays.Material: Steel, hot-dip galvanized or stainless.Central suspension support HDG 4/40/60 30 4552430Central suspension support SS 4/40/60 30 4555430
Fast-fi x hanger
P11
2475 Fast-fi x hanger for 35 mm high mesh trays. For ceiling-suspended installations with threaded rods. Direct clip-in on one side of
the mesh tray. No tools required, screw-less.Material: Spring steel, lamellar zinc.Fast-fi x hanger 35 LZ 37/29/54 20 4532400
Side suspension bracketsClip-on bracket to be used for ceiling-suspended installations of 60, 70 and 105 mm high mesh trays with threaded rods.Material: Stainless steel.
P11
2518 Support for box + bracket SS 20/72/92 10 4575120
Support for box + bracket HDG 20/72/92 10 CSU4572120
P11
2506 Support for box + bracket, double, SS 20/100/182 5 4575130
C-shape supports
P11
2525 C-shape support for ceiling-suspended installation. To be used together with threaded rods.
Material: Steel, hot-dip galvanized or stainless.C-shape support HDG 70/39/36 10 4552440C-shape support SS 70/39/36 10 4555440
L-shape supports
P11
2524 L-shape support for suspended installations with threaded rods.
Material: Steel, hot-dip galvanized or stainless.L-shape support HDG 104/39/36 10 4552450L-shape support SS 104/39/36 10 4555450
Threaded rods
P11
2526 Threaded rod for ceiling-suspended installations, used with suspension support and brackets. Supplied with nuts and washers.
Material: Stainless steel. Threaded rod M8x0.5m SS M8/500 10 4555470Threaded rod M8x1m SS M8/1000 10 4555480
Swivel pendant supports
P11
2528 Swivel pendant support for ceiling-suspended installations with a U-profi le and pendant brackets. Four bolts are required for
fi xing of the U-profi le.Material: Steel, hot-dip galvanized or stainless. Swivel pendant support HDG 116/150/60 4 4552410Swivel pendant support SS 116/150/60 4 4555410
U-profi les
P11
2529 U-profi le. For ceiling-suspended installations with swivel support and pendant brackets.
Material: Steel, hot-dip galvanized or stainless. U -profi le HDG 30/55/1000 4 m 4552420U-profi le SS 30/55/1000 4 m 4555420
Performa mesh trays
ISC01459_11-2010_EN 47
RangeHot-dip galvanized, stainless steel
Ceiling supportType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Pendant brackets, hot-dip galvanized
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4552420) and swivel pendant support
(4552410) for ceiling-suspended installations. Four bolts (4572110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4562120).Material: Steel, hot-dip galvanized. Pendant bracket 100 HDG 87/50/160 10 4552910Pendant bracket 150 HDG 87/50/210 10 4552915Pendant bracket 200 HDG 87/50/260 10 4552920Pendant bracket 300 HDG 94/50/360 10 4552930Pendant bracket 400 HDG 100/50/460 4 4552940Pendant bracket 500 HDG 110/50/560 4 4552950Pendant bracket 600 HDG 110/50/660 4 4552960Pendant brackets, stainless steel
P11
2527 Pendant bracket from 100 to 600 mm width. To be used in combination with U-profi le (4555420) and swivel pendant support
(4555410) for ceiling-suspended installations. Four bolts (4575110) are required to fi x the bracket to the U-profi le. Mesh tray fi xed to the bracket by bolted fi xings (4565120).Material: Stainless steel. Pendant bracket 100 SS 87/50/160 10 4555910Pendant bracket 150 SS 87/50/210 10 4555915Pendant bracket 200 SS 87/50/260 10 4555920Pendant bracket 300 SS 94/50/360 10 4555930Pendant bracket 400 SS 100/50/460 4 4555940Pendant bracket 500 SS 110/50/560 4 4555950Pendant bracket 600 SS 110/50/660 4 4555960
Floor supportInsulating support
P11
2530 Insulating support for fl oor installations. Suitable for all mesh trays except 60x60 mm. The mesh tray is fi xed by clipping wires into
the support. Maximum recommended span between supports: 1 m.Material: PA 6.6, colour black. Insulating fl oor support 45/44.5/85 20 4571700
Floor-mounted brackets, hot-dip galvanized
P11
2520 Bracket for fl oor-mounted installations in raised fl oors. The bracket is used as a raiser. Mesh tray fi xed to the bracket by bolted
fi xings (4562120).Material: Steel, hot-dip galvanized. Vertical/suspended/fl oor bracket 100 HDG 38/50/185 10 4552310Vertical/suspended/fl oor bracket 150 HDG 38/50/235 10 4552315Vertical/suspended/fl oor bracket 200 HDG 38/50/285 10 4552320Vertical/suspended/fl oor bracket 300 HDG 38/50/385 10 4552330Vertical/suspended/fl oor bracket 400 HDG 38/50/485 5 4552340Vertical/suspended/fl oor bracket 500 HDG 38/50/585 5 4552350Vertical/suspended/fl oor bracket 600 HDG 38/50/685 5 4552360
Floor-mounted brackets, stainless steel
P11
2520 Bracket for fl oor-mounted installations in raised fl oors. The bracket is used as a raiser. Mesh tray fi xed to the bracket by bolted
fi xings (4565120).Material: Stainless steel.Vertical/suspended/fl oor bracket 100 SS 38/50/185 10 4555310Vertical/suspended/fl oor bracket 150 SS 38/50/235 10 4555315Vertical/suspended/fl oor bracket 200 SS 38/50/285 10 4555320Vertical/suspended/fl oor bracket 300 SS 38/50/385 10 4555330Vertical/suspended/fl oor bracket 400 SS 38/50/485 5 4555340Vertical/suspended/fl oor bracket 500 SS 38/50/585 5 4555350Vertical/suspended/fl oor bracket 600 SS 38/50/685 5 4555360
Performa mesh trays
ISC01459_11-2010_EN 48
RangeHot-dip galvanized, stainless steel
Fixing accessoriesType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Locking clip
P11
2556 Locking clip for fast-fi xing of the transversal wires of a mesh tray, once it has been cut to form fl at bends.
Material: Spring steel, lamellar zinc.Locking clip for fl at bend LZ 6/18/21 50 4532900
Profi le fast-fi xingsFast-fi xing intended to fi x mesh trays to profi les 21x41 and 41x41. Specifi c design for 60x60 mm mesh tray. Direct clip-in. No tools required, screw-less. Suitable only for horizontal installations.Material: Spring steel, lamellar zinc.
P11
2472 Profi le fast-fi xing LZ 29/51/19 50 4532300
P11
2471 Profi le fast-fi xing 6060 LZ 54/68/34 25 4532100
Fixings
P11
2533 Fixing device for fi xing of the mesh trays to brackets.
Material: Steel, hot-dip galvanized or stainless. Fixing HDG 23.5/23.5 50 4562120Fixing SS 23.5/23.5 50 4565120
Bolts
P11
2534 Bolt for the fi xing of swivel supports and pendant brackets to U-profi le, as well as fast-fi x suspended brackets back to back, if
required.Material: Steel, stainless or lamellar zinc.Bolt M6x12 SS 23.5/13.5 50 4725912Bolt M6x20 SS 23.5/13.5 50 4575110Bolt M8x20 SS 23.5/13.5 50 4326605Bolt M6x12 LZ 15.5/13.5 50 4722912Bolt M6x20 LZ 23.5/13.5 50 4572110
P11
2467 Pin-bolt for fast-fi xing of pendant bracket to U-profi le and of U-profi le to swivel support.
Material: Stainless steel.Pin-bolt M6x70 SS M6/70 10 4575115
Cover fi xing
P11
2469 Cover fi xing for mesh trays, for extra fi xing of the cover if required (optional). Suitable for all sizes from 60 to 600 mm. Direct
clip-in. Screw-less.Material: Spring steel, lamellar zinc.Mesh tray cover fi xing LZ 18/15/32 50 4532800
Supports for derivation boxClip-on bracket to be used for fi xing of a derivation box in 60, 70 and 105 mm high mesh trays.Material: Stainless steel.
P11
2518 Support for box + bracket SS 20/72/92 10 4575120
Support for box + bracket HDG 20/72/92 10 CSU4572120
P11
2506 Support for box + bracket, double, SS 20/100/182 5 4575130
Other accessoriesCable drop-out
P11
2466 Cable drop-out to be directly clipped-in on all sizes of mesh tray except 60x60 mm. Fixed by folding a fl ap at the bottom with a screw-driver. Screw-less.Material: Spring steel, lamellar zinc.Cable drop-out LZ 50/40/110 10 4532700
Earthing clamp
P11
2470 Earthing clamp for earthing of the installation to comply with safety requirements. Fixed to the wires on the side of the mesh trays.
Admits cables from 16 to 70 mm2.Material: Brass, electrolytical nickel coating.Earthing clamp EZ 85/107/24 10 4571310
Performa mesh trays
ISC01459_11-2010_EN 49
RangeHot-dip galvanized, stainless steel
Other accessoriesType Dimensions
A/B/C (mm) Qty perpackage
Ref. No.
Marking
P11
2542 ID-label, blank, suitable for all cable trays. Can be placed on the side or at the bottom of the tray for identifi cation.
Material: PC/ABS. Colour: White.ID-label 30/100 25 4551485
Cutting tool
P11
2543 Bolt cropper for cutting and forming of accessories from straight elements. Suitable for all sizes and fi nishes.
Bolt cropper 130/470 1 4580110
Performa mesh trays
ISC01459_11-2010_EN 50
Technical descriptionDesign and dimensions
Technical and material dataSteel Wire Specifi cation: C4D: EN 10016-2-3 AISI 304 (Stainless Steel): EN 10088-2 Density: 7.85 kg/m3
Surface Treatment Electro-zinc (>8 μm): EN 12329-1 Bi-chromate (>8 μm): EN 12329-1 Hot-dip galvanised (>70 μm): EN ISO 1461 Passivated (Stainless Steel)Steel Sheet Specifi cation: Dx51D+Z275 MA-C Density: 7.85 kg/m3
Resistance to impact IK-10 (EN 50102)Temperature Range From –40°C to +120°CStandards: The products comply with the standards: • IEC 61537 – Loading and defl ection – Electrical Continuity across couplers – System with electrical continuity • IEC 60068-2-75 (resistance to impact) • EN ISO 9227 (Spray Salt test)
Forming of accessories
P11
2480
P11
2507
Longitudinal wireTransversal
wire
P11
2480
Detailed dimensionsMesh tray size Longitudinal
wire Ø mmTransversal wire Ø mmHeight x width mm Length mm
35x50 35x100 35x150 35x200 35x300
30003000300030003000
4.44.44.44.44.4
3.93.93.93.93.9
60x60 3000 4.4 3.970x100 70x150 70x200 70x300(*) 70x400(*) 70x500(*) 70x600(*)
3000300030003000300030003000
4.44.44.44.94.94.94.9
3.93.93.93.93.93.93.9
105x200(*) 105x300(*) 105x400(*) 105x500(*) 105x600(*)
30003000300030003000
4.94.94.94.94.9
3.93.93.93.93.9
(*) The longitudinal wire Ø for the stainless steel range is 4.4 mm.
Cable capacity*Mesh tray size
Height mm Widthmm
Cross sectionmm2
35x5035x100 35x150 35x200 35x300
35 35 35 35 35
50100150200300
1 238 2 688 4 288 5 888 9 088
60x60 60 60 2 66670x100 70x150 70x200 70x300 70x400 70x500 70x600
70 70 70 70 70 70 70
100150200300400500600
5 268 9 11212 32819 02825 728 32 42839 128
105x200 105x300 105x400 105x500 105x600
105105105105105
200300400500600
18 76828 96839 16849 36859 568
* Unless it is stated in the country's regulations, we suggest the following orientative values to determine the cable tray to install:• Fill factor value to apply to the cross-sectional area of the cables: 80% for power cables, 40% for data cables.• Enlargement factor: 30%.Cable fi ll must not exceed the depth of the side rail of the cable tray. In case of doubt, please contact Schneider Electric.
Fig. 1 Fig. 2
Fig. 3
P11
2722
P11
2723
P11
2724
Performa mesh trays
ISC01459_11-2010_EN 51
Technical descriptionSafe working load
Safe working-load The safe working-load is calculated according to the standard IEC 61537. See diagrams below.• The load is uniformly distributed along the mesh trays• The kind and number of couplers used are the ones detailed in the chart “Recommended couplers”• The maximum distance between couplers and brackets is 1/5 of the span between brackets• The safety working-load value is given when: – the longitudinal defl ection is ≤1% of the span between brackets – the transversal defl ection is ≤5% of the width of the mesh tray
0
10
20
30
40
50
60
2 m1,75 m1,50 m1,25 m1 mLo
ad K
g/m
Span
0
10
20
30
40
50
60
70
80
90
100
110
2 m1,75 m1,50 m1,25 m1 m
Load
Kg/m
Span
0102030405060708090
100110120130140150160
2 m1,75 m1,50 m1,25 m1 m
Load
Kg/m
Span
50
65
80
95
110
125
140
155
170
185
200
2 m1,75 m1,50 m1,25 m1 m
Load
Kg/m
Span
Performa mesh trays
ISC01459_11-2010_EN 52
Technical descriptionAdmissible work load on brackets
Admissible working-load on bracketsThe admissible working-load is calculated according to the standard IEC 61537. See diagrams below.• The load is uniformly distributed along the bracket• The safety working-load value is given when the transversal defl ection is ≤5% of the width of the bracket.Horizontal wall solutions
Ref. No. Load kg* Ref. No. Load kg*Horizontal bracket 45xx110 324 Fast-fi x horizontal bracket 45xx110 324
45xx115 267 45xx111 26745xx120 273 45xx112 27345xx130 214 45xx113 21445xx140 300 45xx114 30045xx150 325 45xx115 32545xx160 180 45xx116 180
Horizontal bracket set 45xx210 418 Horizontal bracket Omega 45xx310 19845xx215 428 45xx315 12145xx220 345 45xx320 10045xx230 331 45xx330 7845xx240 31545xx250 25045xx260 190
Ceiling-suspended solutionsRef. No. Load kg* Ref. No. Load kg*
Suspended bracket 45xx310 51 Reinforced susp. bracket 45xx620 50545xx315 52 45xx630 48145xx320 59 45xx640 51545xx330 62 45xx650 44245xx340 56 45xx660 46045xx350 4245xx360 35
Ceiling bracket Omega 45xx410 264 Swivel support + U-profi le+ Pendant bracket
45xx410 + 45xx420 + 45xx910
9045xx415 15445xx420 107
45xx410 + 45xx420 + 45xx915
8545xx430 85
45xx410 + 45xx420 + 45xx920
80
45xx410 + 45xx420 + 45xx930
70
45xx410 + 45xx420 + 45xx940
60
45xx410 + 45xx420 + 45xx950
50
45xx410 + 45xx420 + 45xx960
40
Ref. No. Load kg* Load kg* double1)
Fast-fi x suspended bracket
45xx510 127 – 45xx520 138 – 45xx530 98 – 45xx540 70 25045xx550 60 23045xx560 49 17045xx570 – 14045xx580 – 1402)
45xx590 – 1402)
1) Two brackets back-to-back, fi xed together with bolts.2) Per metre, with a maximum distance between two threaded rods of 950 mm. The threaded rods must be placed all along the bracket.* These values refer to all the surface treatments available for each bracket.
Performa mesh trays
ISC01459_11-2010_EN 53
Technical description
Recommended fi xings for bracketsWidth of mesh tray mm
No. of fi xings for all kinds of brackets
60 1 Profi le fast-fi xings, fi xings100 1
150 2200 2300 3400 4500 4600 4
Recommended couplersMesh tray size
Options for side-coupling (the quantity equals the sum of both sides)
Couplers used as central couplers
Side couplers Couplers Fast couplers
35x100
2 2 2
Not required35x150 135x200 135x300 260x60 2 2 2 Not required70x100
2 2 2Not required
70x150 170x200 170x300
2 4 2
270x400 270x500 370x600 3105x200
2 4 4
1105x300 2105x400 2105x500 3105x600 3
Resistance to tractionResistance to traction (kg)
1 U-profi le + 1 pendant bracket
1000
1 L-shape support
362
1 C-shape support
400
1 Treaded rod M6-M8
100 According to the standard IEC 61534 1: Measuring point for the deformation F: Strength
Performa mesh trays
ISC01459_11-2010_EN 54
Instructions for making accessories
2,7
KgL470
B130
MÁX 3 mm
MÁX 3 mm
How to cut the mesh trays
Coupling of all elements
12
L
B
23,5 23,5
TorquePart numberL
HeightB
Width
Value of recommended torque
45 xx 110
Fast-fi xing of large radius fl at bends
L
B
18 21
Part numberL
HeightB
Width
45 xx 900
Performa mesh trays
ISC01459_11-2010_EN 55
Instructions for making accessories
C3
60 100 150 200 300 400 500 600
W
o o o o o o o125 85 55 37 25 19 15,5 12o
Approximate angles
C5
60 100 150 200 300 400 500 600
W
o o o o o o 180 135 90 67 45 34 27 22o o
Approximate angles
C4
60 100 150 200 300 400 500 600
W
o o o o o o 145 100 65 44 30 23 18,5 14o o
Approximate angles
60 100 150 200 400 500 600 300
W
o o o o o o o20 13 10 5 4 3 2o 7 c1
c2
c3
c4
c5
o o o o o o o90 64 45 30 15 12,5 10o 20 o o o o o o 125 85 55 25 19 15,5 12o o 37
o o o o 145 100 65 23 18,5 14o o o o44 30 o o o o o o 180 135 90 67 45 34 27 2 2o o
Wcorte
ExampleFor a mesh tray width of W = 300, I wish to realize an angle of 60°
OPTION 1: 3 cuts OPTION 2: 2 cuts
(20° + 20° + 20°)(30° + 30°)
How to obtain the same angle with different bending radii function of numbers of cuts.
These examples can apply for any with of mesh trays
Practical application of the various cuts
C1
60 100 150 200 300 400 500 600
W
o o o o o o o o20 13 10 7 5 4 3 2Approximate angles
How to cut to obtain different kind of angles
C2
60 100 150 200 300 400 500 600
W
o o o o o o o o90 64 45 30 20 15 12.5 10
Approximate angles
Performa mesh trays
ISC01459_11-2010_EN 56
Instructions for making accessories
C2
C2
C1
C2
W
60 100 150 200 300 400 500 600
C2
C3
x1 x2 x2x3 x6 x8 x9x2
rL 450 450 210 310 550 600 760 900
255 200 50 75 110 175 225 260
Necessary length780 780 335 480 930 930 1225 1370
C1
C1 x4 x2++
L
Lr
o90
Large Radius fl at bends
W
W=300 mm
C3
C2
C2
C3C3
C2
C2
C3
C3
C3
W
W=100 mm
WWC1
C1
C2
Coupling of large radius bends
L
B
18 21
Part numberL
HeightB
Width
45 xx 900
Performa mesh trays
ISC01459_11-2010_EN 57
Instructions for making accessories
60 100 150 200 300 400 500 600
(approx.)
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS
Right angle fl at bends
2
60 100 150 200 300 400 500 600
1
L
L
3
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS (approx.)
Coupling of right angle fl at bends
12
L
B
23,5 23,5
TorquePart numberL
HeightB
Width
Value of recommended torque
45 xx 110
Performa mesh trays
ISC01459_11-2010_EN 58
Instructions for making accessories
2
1
60 100 150 200 300 400 500 600
WL
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS
Cut matches with transversal mesh
(approx.)
W
1
L
2
3
4
L=W
5
T junction (90˚ radius)
Coupling of T junction (90˚ radius)
12
L
B
23,5 23,5
TorquePart numberL
HeightB
Width
Value of recommended torque
45 xx 110
Performa mesh trays
ISC01459_11-2010_EN 59
3
1
2
60 100 150 200 300 400 500 600
L= W-W1
WL
W1
(approx.)
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS
ALLOWMOUNTING LIDS
Reducer
Coupling of reducers
12
L
B
23,5 23,5
TorquePart numberL
HeightB
Width
Value of recommended torque
45 xx 110
Instructions for making accessories
Performa mesh trays
ISC01459_11-2010_EN 60
Instructions for making accessories
Cn1
CONCAVE CONVEX
CONCAVE
CONVEXr
o90
convex
concave
convex concave
3560/70105
65250-
1259050
220180150
300250250
185 315 450
r
x3x2 x4x1
r
x3x2 x4x1
Radius accor ding to fla t
ro90
Cn3
Cn2
Cn1
Cn1
Cn3
35
60/70
105
de 0 a 180º
de 0 a 180º
de 0 a 180º
de 0 a 155º
de 0 a 90º
de 0 a 60º
45º
25º
15º
45º
25º
15º
concave convexconcaveconvex
From 0 to 180º
From 0 to 180º
From 0 to 180º
From 0 to 155º
From 0 to 90º
From 0 to 60º
45º
25º
15º
45º
25º
15º
Angles accor ding to fla t
Raisers
Coupling of raisers
12
L
B
23,5 23,5
TorquePart numberL
HeightB
Width
Value of recommended torque
45 xx 110
Performa mesh trays
ISC01459_11-2010_EN 61
Reference number overview
Ref no ..................... Page1506150.......................401506155.......................402511204 .......................392511220 .......................392511230 .......................392511231 .......................392511240 .......................392521706.......................402521708.......................402521710.......................402521716.......................402521718.......................402521720.......................402521726.......................402521728.......................402521730.......................404326605.......................484511110 .......................344511115 .......................344511120 .......................344511130 .......................344511206 .......................344511210 .......................344511215 .......................344511220 .......................344511230 .......................344511240 .......................344511250 .......................344511260 .......................344511320 .......................344511330 .......................344511340 .......................344511350 .......................344511360 .......................344512110 .......................424512115 .......................424512120.......................424512130.......................424512206.......................424512210.......................424512215.......................424512220.......................424512230.......................424512240.......................424512250.......................424512260.......................424512320.......................424512330.......................424512340.......................424512350.......................424512360.......................424515110 .......................424515115 .......................424515120.......................424515130.......................424515206.......................424515210.......................424515215.......................424515220.......................424515230.......................424515240.......................424515250.......................424515260.......................424515320.......................424515330.......................424515340.......................424515350.......................424515360.......................424516110 .......................344516115 .......................344516120.......................344516130.......................344516206.......................344516210.......................344516215.......................344516220.......................344516230.......................344516240.......................344516250.......................344516260.......................344516320.......................344516330.......................344516340.......................344516350.......................34
4516360.......................344530100.......................404530135.......................354530200.......................354530300.......................404530400.......................364530400.......................384530510.......................374530520.......................374530530.......................374530540.......................374530550.......................374530560.......................374530570.......................374530580.......................374530590.......................374530700.......................414530800.......................354530800.......................414530900.......................404532100.......................484532135.......................434532200.......................434532300.......................484532400.......................464532510.......................454532520.......................454532530.......................454532540.......................454532550.......................454532560.......................454532570.......................454532580.......................454532590.......................454532700.......................484532800.......................434532800.......................484532900.......................484541106 .......................354541110 .......................354541115 .......................354541120 .......................354541130 .......................354541140 .......................354541150 .......................354541160 .......................354542106.......................434542110 .......................434542115 .......................434542120.......................434542130.......................434542140.......................434542150.......................434542160.......................434545106.......................434545110 .......................434545115 .......................434545120.......................434545130.......................434545140.......................434545150.......................434545160.......................434550110 .......................354550111 .......................354550112 .......................354550113 .......................354550114 .......................354550115 .......................354550116 .......................354550310.......................364550315.......................364550320.......................364550330.......................364550410.......................384550415.......................384550420.......................384550430.......................384551110 .......................364551115 .......................364551120 .......................364551130 .......................364551140 .......................364551150 .......................364551160 .......................36
4551210.......................364551215.......................364551220.......................364551230.......................364551240.......................364551250.......................364551260.......................364551310.......................364551310.......................374551310.......................394551315.......................364551315.......................374551315.......................394551320.......................364551320.......................374551320.......................394551330.......................364551330.......................374551330.......................394551340.......................364551340.......................374551340.......................394551350.......................364551350.......................374551350.......................394551360.......................364551360.......................374551360.......................394551410.......................394551420.......................374551420.......................394551430.......................384551440.......................384551450.......................384551467.......................384551470.......................384551480.......................384551481.......................394551482.......................394551485.......................414551485.......................494551510.......................374551515.......................374551520.......................374551530.......................374551540.......................374551550.......................374551560.......................374551620.......................384551630.......................384551640.......................384551650.......................384551660.......................384551910.......................374551910.......................394551915.......................374551915.......................394551920.......................374551920.......................394551930.......................374551930.......................394551940.......................374551940.......................394551950.......................374551950.......................394551960.......................374551960.......................394552110 .......................444552115 .......................444552120.......................444552130.......................444552140.......................444552150.......................444552160.......................444552310.......................444552310.......................454552310.......................474552315.......................444552315.......................454552315.......................474552320.......................444552320.......................454552320.......................474552330.......................44
4552330.......................454552330.......................474552340.......................444552340.......................454552340.......................474552350.......................444552350.......................454552350.......................474552360.......................444552360.......................454552360.......................474552410.......................464552420.......................444552420.......................464552430.......................464552440.......................464552450.......................464552910.......................454552910.......................474552915.......................454552915.......................474552920.......................454552920.......................474552930.......................454552930.......................474552940.......................454552940.......................474552950.......................454552950.......................474552960.......................454552960.......................474555110 .......................444555115 .......................444555120.......................444555130.......................444555140.......................444555150.......................444555160.......................444555310.......................444555310.......................454555310.......................474555315.......................444555315.......................454555315.......................474555320.......................444555320.......................454555320.......................474555330.......................444555330.......................454555330.......................474555340.......................444555340.......................454555340.......................474555350.......................444555350.......................454555350.......................474555360.......................444555360.......................454555360.......................474555410.......................464555420.......................444555420.......................464555430.......................464555440.......................464555450.......................464555470.......................464555480.......................464555910.......................454555910.......................474555915.......................454555915.......................474555920.......................454555920.......................474555930.......................454555930.......................474555940.......................454555940.......................474555950.......................454555950.......................474555960.......................454555960.......................474556430.......................384561110 .......................354561120 .......................40
4561150 .......................354561200.......................354561205.......................354562110 .......................434562120.......................484562200.......................434562205.......................434565110 .......................434565120.......................484565150.......................434565200.......................434565205.......................434566110 .......................354566120.......................404566200.......................354566205.......................354571110 .......................404571115 .......................404571120 .......................364571120 .......................384571120 .......................414571130 .......................384571130 .......................414571310.......................414571310.......................484571315.......................414571408.......................404571410.......................404571416.......................414571418.......................414571436.......................414571438.......................414571510.......................344571520.......................344571530.......................344571700.......................394571700.......................474572110 .......................484572510.......................424572520.......................424572530.......................424575110 .......................484575115 .......................484575120.......................444575120.......................464575120.......................484575130.......................464575130.......................484575510.......................424575520.......................424575530.......................424576110 .......................404580110 .......................414580110 .......................494580130.......................414580131.......................414721730.......................344721760.......................344721780.......................344721912.......................404722730.......................424722760.......................424722780.......................424722912.......................484725912.......................48CSU4511050 ...............34CSU4512050 ...............42CSU4515050 ...............42CSU4516050 ...............34CSU4550360 ...............38CSU4550365 ...............38CSU4572120 ...............44CSU4572120 ...............46CSU4572120 ...............48
This document has been printed on ecological paper
Schneider Electric Industries SAS35 rue Joseph Monier 92500 Rueil-Malmaison Francewww.schneider-electric.com
Nov-2010
ISC
0145
9EN
© S
chne
ider
Ele
ctric
- A
ll rig
hts
rese
rved
As standards, specifi cations and designs change from time to time, please ask for confi rmation of the information given in this publication.
Publishing: Schneider Electric Industries SASDesign:Printing: