MERCURY & GAS SAMPLING EQUIPMENT - Apex …old.apexinst.com/distcorn/PDF's/catalog/2010 Catalog...

3a www.apexinst.com 800-882-3214 /919-557-7300

MERCURY & GAS SAMPLING EQUIPMENT

SK-606 Method 6

Gases in most stacks or ducts are often comprised of small amounts of volatile and potentially toxic compounds, in addition to the major gas components of nitrogen, oxygen, and carbon dioxide. Most compounds, at parts per millions level, that have boiling points below water usually exist in a vapor state. Prior to collecting the gas in a sample container or collections vessel, a glass wool plug or filter is often used to screen out particulate matter from the gas stream.

gaSEOUS SamPling

SK-0031 SuperVost

XC-60 Meter Console

FEATUREd METhOdSApex Instruments has Gas and Mercury Sampling Equipment for the Following Methods.

METhOd dESCRIPTION

MERCURYMEThOd 30b

Appendix K, Method 30B, RATA for Mercury

METhOd 4A Stack Gas Moisture Approximation

METhOd 6 Sulfuric Acid Mist & SO2

METhOd 6A Sulfur Dioxide, Moisture and Carbon Dioxide

METhOd 6b Sulfur Dioxide and Carbon Dioxide

METhOd 7, 7C, 7d Nitrogen Oxides

METhOd 11 Hydrogen Sulfide in Petroleum Refinery Fuel Gas Streams

METhOd 15A Total Reduced Sulfur from Petroleum Refinery Fuel Gas Sulfur Plants

METhOd 16A Total Reduced Sulfur

METhOd 18 Integrated Bag Sampling for Organic Compounds

METhOd 26 Hydrogen Halides & Halogens

METhOd 106 Integrated Bag Sampling for Vinyl Chloride

METhOd 308 Methanol

METhOd 0030 Semi-Volatile Organic Compounds (VOST)

METhOd 0031 Volatile Organic Compounds (SMVOC or SuperVOST)

METhOd 0040 Principle Organic Hazardous Constituents (POHC’S) Using Tedlar Bags


800-882-3214 /919-557-7300 www.apexinst.com 4a

MercSampler XC-6000EPC

heated Sample Probe, page 13

Flange, page 14

J-hook, page 14

heated Umbilical Line, page 14

Monorail, page 14

Stirling Coolerpage 9

XC-6000EPC mErCSamPlErThe automated XC-6000EPC MercSampler for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accor-dance with the U.S. EPA Clean Air Mercury Rule (CAMR) published in CFR 40, Part 75, Appendix K, Part 63 PS-12B and to conform to new expected regulations. Performance Specification 12B: Specifications and Test Procedures for monitoring total vapor phase mercury emissions from stationary sources using a Sorbent Trap Monitoring System.

The purpose of performance specification 12B (PS 12B) is to evaluate the acceptability of sorbent trap monitoring systems used to monitor total vapor-phase mercury (Hg) emissions in stationary source flue gas streams. These monitoring systems involve continuous repetitive in-stack sampling using paired sorbent me-dia traps with periodic analysis of the time-integrated samples. Persons using PS 12B should have a thorough working knowledge of methods 1, 2, 3, 4, 5 and 30B in appendices A-1 through A-3 and A-8 to this Part 63.

Power generation utilities will be able to measure and obtain accurate and reliable mercury emissions data in order to determine emission levels and develop control strategies. Power generation utilities may choose from either Continuous Mercury Monitors or Sorbent Trap Monitors like the Apex XC-6000EPC for Mercury Emis-sions Monitoring.

For information on the mercury sampling visit: http://www.epa.gov/mercury.



XC-6000EPC MERCSAMPLERThe XC-6000EPC MercSampler meter console captures all data necessary for paired sorbent trap sampling according to Appendix K and Method 30B. The meter console controls the sample flow rate proportionally to the stack flow rate and determines the standardized volume extracted through each sorbent trap. To collect the samples, two diaphragm vacuum pumps which work with the proportional valves and mass flow sensors, pull the samples through sorbent traps. Paired samples are extracted from the flue gas for the desired time period, from several minutes to several days. There are optical encoders mounted inside the gas meters to provide digital data for the volume sampled. Samples are then analyzed to determine time-averaged emissions.

Packing list accessories

Specifications

dry Gas Meters:• Model 25 series, positive displacement type. • 0.7 liter per revolution.• Optical encoder sensor with quadrature pulse output.• 8 digit LCD Display, 1 cc resolution. • Sample volumes are corrected to standard temperature and pressure, then stored.Sample Pumps:• BTC Diaphragm, Brushless Motor - 12 Vdc, 20” Hg Vacuum, 10,000 hour MTBF, 3900 RPM, Max. PSIG 24”.Sample Flow Control:• Vacuum: 0 to 30” Hg, 0 to 101 kPa, 2% accuracy.• Stainless steel sample manifolds fitted with mass flow sensors, vacuum sensors, and proportional valves.• Proportional or constant flow sampling.• Mass Air Flow: proportional flow control, 100 to 2000 ccm, port style, manifold mount.• Proportional Valve: Voltage Sensitive Orifice (VSO), 12 Vdc.data Acquisition Control board (dAC): • Enhanced Flash 16 bit RISC based microcontrollers; main and Digital Signal Processing (DS). Real time clock with auto backup and write protection to external SRAM.• High Speed 14bit A/D convertor with parallel DSP interface.• 1 GB SD Memory Card for data storage – stores up to 99 tests (30 day test runs). Embedded Ethernet Port with full TCP/IP Protocol and 256 bit encryption.• USB 2.0 Comm Input connection.

Thermocouple Multiplexer:• Accepts Type K Thermocouple inputs; input protection includes gas discharge tubes for ESD and surge protection.• 11 Pic Microcontrollers, 1 for each channel and MUX circuitry• MUX Circuitry to receive multiple inputs and transmit selected output.• 10 microcontrollers, one for each optically isolated channel.Integrated Temperature Control:• Designed into DAC for probe/trap heat control output via 25 amp SSR.barometric Pressure: 600 to1100 mbar, 17.7 to 32.4”Hg, temperature compensated, amplified output.Communications:• PC user interface via Ethernet, USB, or optional wireless router• Remote access and control via onboard configurable router to owners Network Computer.• Optional TCP/IP MODBUS (ASCII or RTU) Communications to the DAS.• Optional interface to DAS system via TCP/IP Modbus.Weight: 34 lbs. (15.5 Kg).dimensions: HxWxD 14” x 19” x 15.5” (35.56 cm x 48.26 cm x 39.37 cm).

The XC-6000EPC MercSampler simplifies most sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily trans-ferred to a Microsoft Windows XP-based PC through Ethernet, USB or an optional Wireless Interface.

XC-6000EPC

XC-6000EPC MercSampler Console

Features• Customer-Friendly Software and Firmware• Easy Data Export (Text and CSV files)• Configurable System Alarms (Dry Contact Closure/Piezo Alert)• Quarterly Audit Calibration Check (Optional Audit/Cal Kit)• Remote Input for External Test Pause and Resume

meets U.S. EPa 40, CFr Part 75, appendix K and method 30B requirements (formerly method 324).

Installation: 19” Rack Mount Standard. Available 8U Transport case, ShockMount Rack or Weather Resistant Aluminum Cabinet Configurations.



MERCSAMPLER SOFTWAREMercSampler Automated Software works with a windows based platform. It allows the operator to quickly set up test profiles, perform sample runs, sensor calibration, DGM calibration, run quarterly audits and download test data at any time during or after a test run. Software can be purchased separately for use with customer supplied computer. Intuitive windows based operator interface may be run from local PC or remote network connection.

XC-6K-SW

MERCSAMPLER FIRMWARE:The Apex Instruments specifically engineered firmware (embedded software) has been designed to utilize the technical features of the RISC based Microchip microcontrollers. RISC microcontrollers provide decision making as well as precise “autonomous” control of the console while the laptop or PC is not connected. Microcontroller Hex code is easily updated in the field with a simple executable program and a programming interface cable which allows for continued enhancements and upgrades of the product.

Test Profile/Configuration Set-upCustomize test setup with the user defined profiles & configurations, or use the default set-tings which can be stored & retrieved.

Pre & Post Leak Test:Automated pre-test leak check with variable vacuum, and an auto-mated post-test leak check with vacuum, regulated to the maximum vacuum recorded during test.

Active Test data:Real-time test screen enables the user to see instantaneous & /or cumulative data in an easy-to-read graphic display screen or raw text.

Calibration:Simple and easy to follow steps to fully calibrate all required components. This application provides electronic documentation stored with each test run.

Alarm:Multiple alarm configu-rations for tolerance, signal loss, idle time out, thermocouple in-puts and power failure.

MercSampler Software Screens

MerSampler Firmware diagram

Computer Recommendations:Processor: 1.80 GHz or faster

Memory: 1 G, DDR2, 533MHZ

hard drive: 40 G or greater, 5400 RPM SATA

Port: Ethernet Ready and USB 2.0

Optical drive: CD-RW/DVD Combo (CD Required)

Software: Microsoft Windows XP, SP2 (Framework. net 3.5, Microsoft Office Installed, Adobe Reader)

Wireless: 1390 802.11 G Mini Card

Screen: Resolution 800 x 600, 14”



LT-d14RY

hgCalc Software

hg Calc Capabilites:Application used to import XC-6000 sample run data and trap analysis data to perform calculations for Appendix K. Sold separately.

The hgCalc Software uses sample run data and trap analysis. The sample run data from the MercSampler XC-6000 is imported into the application, where total mercury mass, hourly and total mercury emissions are calculated. The software insures the specifications in 40CFR, part 75 are met. The software will also verify QA/QC specifications regarding Section 2 breakthrough, relative deviation, and Section 3 spike recovery as shown in Appendix K, table K-1.

When all calculations are complete and data verified this can be exported currently in Excel, Comma Separated Values (CVS), Text/PDF format and will be available in an XML report format in the near future.

6K-HgCalC

Durabook Features• Intel Core-Duo T2080 - 1.73 GHz• 14.1” TFT 1024 x 768 Screen • WindowsXP/Vista Capable • 80GB SATA, 5400 pm• Intel® Graphics Media Accelerator (GMA)• 1024 MB DDRII• Spill resistant Keyboard (85 keys)• 6 Cell Lithium-Ion Battery

durabookThe LT-d14RY Series has a magnesium case with four corner bumpers to protect internal components, a spill resistant keyboard with insulation, and anti-shock around the system’s vital components offering protection from drop and concussion. Optional sunlight readable screen is also available. One year warranty. Dimensions: HxWxD: 1.5” x 12.3” x 10.1” (3.81 cm x 31.2 cm x 25.7 cm). Weight: 5.73 lbs. (2.6 kg.)

Mini 10 NetbookThe Mini 10 and Mini 10v are everything you want in a mobile companion and more. They may be small, but you’ll be surprised by all the fun features packed inside.

lt-mini-10 mini 10 netbook

Features• Be productive with a keyboard 92% the size of a traditional laptop keyboard.• Enjoy a beautiful view with a seamless display surface and 16:9 aspect ratio.• Stay connected with advanced wireless options.• Navigate like a pro with optional built-in GPS3.

Processor: Intel® Atom Processor® N270 (1.6GHz/533Mhz FSB/512K cache)display: 10.1” Widescreen Display (1024x600) Memory: 1GB DDR2 SDRAM hard drive: 160GB, 2.5inch, 5400RPM SATA Hard Drive Graphics: Intel Graphics Media Accelerator (GMA) 950 Wi-Fi: Dell 1397 WLAN 802.11g - (1397) Half mini-cardOperating System: Genuine Windows® XP Home Edition SP3 Power: 24WHr Lithium-Ion Battery (3-cell)dimensions: HxWxD: 1.1” x 10.28” x 7.19” (2.8 cm x 26.1 cm x 18.3 cm). Weight: 2.6 lbs. (1.18 kg.)

LAPTOPSThe human Machine Interface to the MercSampler Console is the Apex MercSampler Intuitive software utilizing a Windows based PC/laptop. The system is available with several different laptop models available at Apex Instruments; Durabook, Durabook with sunlight readable screen, or the DELL Inspirion Mini 10 Netbook.

LT-Mini-10

lt-D14ry-DB with Sunlight readable Screen

lt-D14ryNetbook - Call for details



The internal frame of the ShockMount Rack Case is mounted on revolutionary adjustable elastomer shock absorbers on all eight corners, designed to control the effects of shock and vibration on three axes. Includes rails, wiring, and hardware for console and gas conditioner installation. The “sway” space around the internal frame provides natural air conditioning. The configuration is suitable for use in a semi-protected area, such as annulus. dimensions: HxWxD: 36.25” x 29.25” x 27.25” (92 cm x 75 cm x 70 cm); Empty Weight: 84 lbs. (38.1 kg).

XC-16USa

Features

• 19” Polyethylene Roto Molded Shell• Front and Rear Covers• Molded-in Handles • Adjustable Elastomer Shock Technology• Corrosive Resistant Polyethylene• Accepts 500 mL Bottles

Assembly includes: Rails, Wiring and Hardware to accept XCP-6000ECP and SGC-4000HG

XC-16USA Shockmount Case

ShockMount Rack Case Assembly

Shown with XC-6000EPC Meter Console and SGC-4000hG Stirling Gas Conditioner

MercSampler Cabinet ConfigurationsAfter 20 years in the industry, Apex Instruments recognizes the wide variety of customer site conditions and offers a range of equipment installation solutions. Apex Instruments has the experience and ability to custom engineer carry cases and cabinets to best suit any application. The installation solutions range from basic components that can be installed in an existing instrument control room, rackmount cabinets or environmental trailers, to self-contained meter console/gas conditioner systems that can be installed in a plant stack annulus or on a stack platform. Call for customization.

XC-8U Transport CaseThe XC-8U Transport Case has a tough exterior for durability. Multiple features help the case protect valuable products from a fall, tumble or rough landing. dimensions: HxWxD: 18” x 22” x 20” (45.7 cm x 55.9 cm x 50.8 cm);Emty Weight: 21 lbs. (9.5 Kg).

XC-8U

Features

• 19” Black Polyethylene Roto Molded Shell• Front and Rear Covers• Molded-in Handles • Shock Absorbing Rubber Feet• Recessed Heavy-Duty Twist Latches• Replaceable Steel Thread Front Rails• Optional Rear Rails Available

XC-8U Transport CaseShown with Rack Mounted

XC-6000EPC MercSamplerMeter Console installed.

Custom Packaging Available. Call for details!



Features• Powder Coated Aluminum• Easy Access Door• Durable Compact Design• Optional Heating and Cooling System• Accepts up to 1000 mL Bottles

MercSampler Cabinet Configurations

Aluminum Environmental Case

66” Enclosure with XCP-AC

XCP-AC

AC option installed on 18U cabinet

XCP-AC

CR-60 Enclosure Cabinet60-inch upright cabinet, 19” rack. Complete with removable louvered side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. (Not for outdoor service). dimensions: 60” (cm) x 19.125” (cm) x 24” (cm). Weight: ~160 lbs. (72.57 kg).

Cr-60...$3,300.00

CR-60-NV Enclosure Cabinet60-inch upright cabinet, 19” rack. Complete with Non-Ventilated side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. dimensions: (HxWxD): 60” (cm) x 19.125” (cm) x 24” (cm). Weight:~160 lbs. (72.57 kg).

Cr-60-nV

The CR-I8U Aluminum Weather Resistant Environmental Case is compact, heavy-gauge Aluminum w/ Weather resistant Powder Coat Paint (internal 19” Rack mount) for meter console and Stirling gas conditioner. dimensions: HxWxD: 37” x 21” x 21” (93.9 cm x 53.3 cm x 53.3 cm);Weight: 125 lbs. (56.69 kg).

Cr-18U

Features• EMI/RFI Suppressor • Internal Corrosion Protection• Two Stage Thermostat• Maintains NEMA 12/3R Rating

Air Conditioner Air Conditioner keeps the cabinet at operating temperature while keeping out dust, fumes, oil and other contaminants. It operates continuously with a two stage thermostat to ensure a longer compressor life and maintain a 6° temperature range. The integral heater kit includes a thermostat and limiter for frost protection.

Capacity: 2000 BTU/H, 1500 BTU/H at 95°F (35°C).Temperature: Maximum 131°F (55°C), minimum -20°F( -28°C). Power: 115/100V, 60/50HZ.Weight: 38 lbs. (17 kg).

CR-66-NV Enclosure Cabinet66-inch upright cabinet, 19” rack. Complete with Non-Ventilated side panels and doors, 19”rack mounting rails, internal equipment drawer slides for XC-6000 Console and SGC-4000 Chiller (sold separately), integral slide tray for laptop or work-space, pre-wired with convenient duplex outlets and top or side sample line and power cable entry. dimensions: (HxWxD): 66” (cm) x 19.125” (cm) x 24” (cm). Weight: ~165 lbs. (74.84 kg).

Cr-66-nV

XCP-AC

XCP-AC Optional Air Conditioner (includes integral heater for frost protection).

XCP-aC



GAS CONdITIONERS

Features• FPSC Chiller Module uses Environmentally Safe Helium Gas as a Refrigerant, no CFC’s.• The Module is Hermetically Sealed in Stainless Steel Casing for Fast and Easy Installation or Replacement as Necessary. • The Cold end of the FPSC is Inserted Directly into a Machined Anodized Aluminum Chiller Block. • C276 Hastelloy Serves as the Reverse Flow Condensate Separators.• Six Times Efficiency of Thermoelectric (peltier) Coolers.• Uses Less than 40w of Electricity.

• 12 V DC Power Supply.

The Apex Instruments SGC-4000hG Stirling Gas Cooler is specially designed for removing moisture and acid gases from flue gas samples. This new gas cooler uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the sample gas to remove moisture. The Stirling will provide a robust, closed, dual channel gas conditioning system to deliver dry, acid free gas to the meter console No peristaltic pumps to leak.

SgC-4000Hg

Optional 10U roto molded rack mounted CaseThe new US Series is the ultimate in American technology with its roto molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pat-tern for solid stackability. The unique molded in unbendable valance and steel threaded rails with self tapping screws make the US Series racks convenient to use and the most durable. dimensions: HxWxD: Outside Dimensions: 20.5” x 23.75” x 22” (52.07 cm x 60.32 cm x 55.88 cm). Weight: 20.46 lbs (9.28 kg).

XC-10UD

Specifications

digital Temperature Control: +/- 1 OC, LED DisplayInlet and Outlet Temperature: Typical Inlet Temperature: 250-3000 F (Heated Lines Set Point).Cooling Capacity: >40 wattsdual Path Cooling block: Anodized Aluminum.Condensate bottle: 1000 ml (plastic coated glass).Acid Scrubber Cartridges: 2 ea. 2-5/8” s 11-3/8” Polycarbonate with Aluma-Sorb; 1/8” Stainless Steel FNPT fitting.

Reverse Flow Condensate Separator: C276 Hastelloy 1” OD x 4” Active Zone.Maximum Flow Rate: 2 lpm at 20% H2O Channel.Freeze Protection: 80w Heater. Ambient Operating Temperature: 0 to 500 C.Power Requirements: 120 V AC/2.5 amps.dimensions: Without Bottles: HxWxD: 17”x16”x7” (43.2 cm x 40.6 cm x 17.8 cm).Weight: 25 lbs (11.3 kg).

Features• Roto molded uni-body construction• Threaded steel rails• Rear rails included• Interlocking X pattern for solid stackability

• Front and rear full size lids• Recessed latches• Molded-in handles• Shock absorbing feet

10U Molded Rack Case

SGC-4000hGStirling Gas Cooler

Shown with XC-6000EPC



Alumina Sorbent is an activated alumina/silica gel primarily used for air drying, acid scrubbing and low temperature applications in the stirling sorbent cartridge. 5.5 lbs (2.5 kg) container (80% alum-sorb, 20% silica gel).

alUma-SOrB

Portable Stirling CoolerThe SGC-4000hGP Stirling Cooler Gas Conditioner Portable Unit comes with a top handle for easy transport and a durable UHMW polyethylene 6U case with condensate collection bottles. Any of the configurations are suitable for use with the Appendix K Mercury Sorbent Trap Sampling System. dimensions: HxWxD: 22” x 13” x 23” (55.88 cm x 33.02 cm x 58.42 cm). Weight: 32 lbs (14.5 kg) without sorbent.

Portable Unit SGC-4000SgC-4000HgP (110V)SgC-4000HgP-V (240V)

Portable SGC-4000hGPALUMA-SORb

Model Description

GSB-1000SC Sample Bottle, Clear Glass, GL-45 Threaded, 1000mL, Safety Coated for Condensate Collection. Requires: GA-GL-45B Cap and GA-GL-25S Seal.

GSB-500SC Safety Coated Sample Bottle, 500mL,

GSB-1000SCA Sample Bottle Assembled, Clear Glass, GL-45 Threaded, 1000mL, Safety Coated for Condensate Collection. Assembly Includes GA-GL-45B Cap and GA-GL-25S Seal.

GSB-1000L Bottle Sample, L-Shape, Clear Glass, GL-45 Thread, 1000mL (Not Safety Coated).

GA-GL-45S Seal for 1000mL Bottles.

GA-GL-45B Bored Cap, #45 Treads.

SC-30B 2 AlumaSorb cartridges, 2 in-line filters with drains & disposablefilter elements in Enclosure with sample line inputs/sampleoutputs, dual stream, designed for use with XC-30B system.

Glassware and Sorbent Cartridges

GA-GL-45Sand GA-GL-45b

GSb-1000L

GSb-1000SCGSb-500SC

GSb-500SCGSb-1000SC

SC-30b



• NIST Traceable• Handheld • Type K, °F or °C • Range: -409° to 2501.6° F (-245 to 1372° C) • Accuracy: 0.5° F (+0.25°C) for Type-K • Output resolution by 0.1° F or °C• Easy Dial Knob

MercSampler Audit KitThe Apex Instruments AK-6000 MercSampler Audit Kit is designed for Appendix K and Method 30B compliance auditing of the XC-6000 MercSampler System. The kit includes a single or dual secondary reference meter console. Single kit is in a rugged 4U X-Case with a molded-in handle for easy transport. Dual kit comes with 8U black polyethylene molded case. Use with software version 80620-94 or later.

MercSampler Audit Screen Shot

Compatible with the MercSampler Software

dGM-AP25SRd Reference dry Gas Meter with Optical Encoder:digital display: 8 Digit LCD, resetable. durable: Built in a rugged 4U X-Case with molded-in handles for easy transport. Calibration: 15-point (Secondary Reference).Vacuum Gauge: 2.5” Face, Range: 0-30” Hg, 1% Accuracy.Single dimensions: HxWxD: 21” x 9.5” x 14” (53 cm x 24 cm x 35.5 cm); 22 lbs (10 kg).

Can be used with XC-6000EPC MercSampler and XCP-6000EPC Portable Console

Packing List

6” Thermocouple Y AdaptertCa-6yHg

36” Thermocouple Type KtCa-36Hg

m5C-520

Thermocouple Simulator handheld digital barometer• NIST Traceable • 15.9-31.01” Hg, Resolution: 0.03” Hg; 400-1070 mbar, Resolution: 1 mbar. • Altitude: -500 - 7000m, Resolution: 1m

Bar-4198

Insulated Ice bath• Vacuum Insulated• Stainless Steel • Capacity: 16 oz.

aK-6tH16

handheld Waterproof Thermometer• NIST Traceable • Waterproof • Range: –58° to 572° F (–50° to 300°C) • Resolution: 0.1° from –20° to 200° • Accuracy: ±0.4°C or ±1.5°C

DPt-168-niSt

Secondary Reference Meter

Dgm-aP25SrD

Single Audit Kit

aK-6000

Single Audit Kit Accessories (Included):



The XC-30b MercSampler Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler performs dual sorbent trap sampling at flow rates up to 2.0 lpm. Can be operated with your choice of probes and gas conditioning systems, including our popular SGC-4000HGP Stirling Gas Conditioner.

METhOd 30b SOURCE SAMPLING SYSTEM

A Typical System Includes:• Automatic Console: XC-30B Sampling Console / with Netbook

(Alternative Option: Manual XC-260 Console Series)• Gas Conditioner: Portable versions

• Stainless Steel Probe: Optional length with single heater, for dual sample traps.• Umbilical: Heated line, specify length

nEWSC-30b

Gas Conditioner

heated dual Trap Sample Probe

heated Umbilical

Line

Automated XC-30b Source Sampling Console with Netbook Computer and MercSampler Software

Please contact your sales representative for more details.



The XC-30b MercSampler Console, designed especially for performing Method 30B, simplifies sampling requirements by automating data acquisition, sample flow adjustments, leak checks, calculations, temperature control, and calibrations. Data is easily transferred to a Microsoft Windows Based PC through USB Interface. The XC-30B MercSampler performs dual sorbent trap sampling at flow rates up to 2.0 lpm. Can be operated with your choice of probes and gas conditioning systems, including our popular SGC-4000HGP Stirling Gas Conditioner.Please contact your sales representative for more details.

XC-30b MERCSAMPLER CONSOLE

Features• Fully Automated for Paired Sampling• Dual Dry Gas Meters and Mass Flow Sensors• Alerts for Port and Traverse Point Changes• Simple Data Export• Compact Portable System• Eight Isolated Type K Thermocouple Channels• USB Interface• Easily Configured with Windows Based PC

Automated XC-30b MercSampler Console &

Netbook Computer

Specifications

dry Gas Meters:• Dual dry gas meters with integrated optical encoders, resolution to 1 cc• Model AP25 positive displacement type. • 0.7 liter per revolution.• Optical encoder sensor with quadrature pulse output.

Sample Pumps:• Dual Head Miniature Diaphragm Pumps with 12 VDC motors, Max Vac. 22” HgSample Flow Control:• Stainless steel sample manifolds fitted with mass flow sensors, vacuum sensors, and proportional valves.• Constant flow sampling.• Mass Air Flow: Flow control, 300 to 2500 ccm• Proportional Valve: Voltage Sensitive Orifice (VSO), 12 Vdc.

data Acquisition Control board (dAC): • Enhanced Flash 16 bit RISC based microcontrollers; main and Digital Signal Processing (DS). Real time clock with auto backup and write protection to external SRAM.• High Speed 14bit A/D convertor with parallel DSP interface.• 1 GB SD Memory Card for data storage – stores up to 99 tests • USB 2.0 Comm Input connection.

Communications:• PC user interface via USBThermocouple Multiplexer:• Accepts Type K Thermocouple inputs; input protection includes gas discharge tubes for ESD and surge protection.• 11 Pic Microcontrollers, 1 for each channel and MUX circuitry• MUX Circuitry to receive multiple inputs and transmit selected output.• 10 microcontrollers, one for each optically isolated channel.Integrated Temperature Control:• Designed into DAC for probe/trap heat control output via 25 amp SSR.Pressure: barometric Pressure • 600 to1100 mbar, 17.7 to 32.4”Hg, temperature compensated, amplified output.

Vacuum • 0 to 30” Hg, 0 to 101 kPa, 2% accuracy• durable UhMW Polyethylene Case: Built-In Handles (Size 10U) 19” Rack Mount Panel• AC Power: 120 Vac 60Hz. / 220 Vac 50Hz• dimensions: 23in x 21in x 12in (58cm x 53cm x 30.5cm)• Weight: 39 lbs. (17.7kg)

XC-30B

XC-30B-V

Advanced Microprocessor Control



Specifications

dry Gas Meters: Model 25 Series, positive displacement diaphragm type, 0.7 liters per revolution, optical encoder sensor with quadrature pulse output, gas volume totalizer with an eight digit LCD display, 1 cc resolution (standard).dual diaphragm Sample Pumps (2) 12 VDC motors, Max Vac. 20” Hg.Probe Temperature Control: Compact, 1/32 DIN auto tuning indicating temperature controller with external 25 amp solid state relay. 115 VAC outlet 5-15R, Standard Type-K jack for input.

XC-260 SOURCE SAMPLER CONSOLEThe Apex XC-260 Source Sampler is a low-price, portable, field-proven meter console that is easy to use, and ideal for sampling mercury emissions based on CFR 40, Part 60, Method 30B.

The heart of the Apex Instruments manual system is the XC-260 Source Sampler, a precision meter console used for collecting Hg emissions. The average mercury concen-tration for the sampling period is determined by using the sample volumes measured by the dry gas meters and the results of the sorbent trap analysis.

Two flow rate configurations are offered; 0.2 to 2.4 litersper minute or 100-1000 cubic centimeters per minute.

XC-260 Manual Source Sampler Console

Features• Dual Independent Flow Paths• Dual Dry Gas Meters with Digital Displays• Coarse and Fine Valves for Precise Flow and Vacuum Control• Stainless Steel Valves and Fittings• Stainless Steel 1/4” Quick Connects• Digital Temperature Controller for Probe Heater • Elapsed Digital Timers • Dual Scale Vacuum Gauges• Durable Polyethylene Case with Built-In Handles (size 10U)

Sampler also ideal for method 18.

Model description

XC-260 Source Sampler 0.2-2.4 lpm flow rate (120 VAC)

XC-260-V Source Sampler 0.2-2.4 lpm flow rate (240 VAC)

XC-260-A Source Sampler 100-1000 cc/min. flow rate (120 VAC)

XC-260-AV Source Sampler 100-1000 cc/min. flow rate (240 VAC)

XC-260-C Source Sampler 4.0 lpm. flow rate (120V)

XC-260-CV Source Sampler 4.0 lpm. flow rate (240V)

Consoles

digital Temperature display: 3.5 Digit Display °F (-157°F to 1999°F), display and controller are resettable for °C upon request (OC is standard for export). Thermocouple Inputs: Five external Type K inputs plus two Type-K Internal Gas Meter connections.Flowmeters: Solid Machined Acrylic (0.2 - 2.4 lpm) *Optional 100-1000 ccm (XC-260A).AC Power: 120 V/60 Hz or Optional 220 V/50 Hz.dimensions: 23” x 21” x 12” (58 cm x 53 cm x 30.5 cm).Weight: 39 lbs. (17.7 kg).



ProbeLength(feet)

Replace -�- with Probe Length Single heater for XC-260HGP�HS

dual heater

HGP�HD

4 4’ Stainless Steel Heated Probe with 2” Outer Sheath, Type K Thermocouples, 1/2” Sample Lines, Insulated Probe Head Junction Enclosure; 120VAC

6 6’ Same as above



Method 30b Stainless Steel Probes

MERCURY PRObES

ProbeLength(feet)

Replace -�- with Probe Length dual heater

HGP�HCD

dual heater with Pitot

HGP�HCDP

4 4’ Alloy C276 Heated Probe with 2” Outer Sheath, Type K Thermocouples, 1/2” Sample Lines, Insulated Probe Head Junction Enclosure; 120VAC

6 6’ Alloy C276 Heated Probe - Same as above



Appendix K Alloy C276 Probes

Appendix K and Method 30b Probes come in standard lengths of 4’, 6’ and 9’. Appendix K Probes are constructed from Alloy C276 for long-term use in extremely corrosive conditions. Type-K thermocouples are used to monitor, trap, stack and probe temperatures. Method 30b Probes come standard in stainless steel with Type-K thermocouples to monitor trap and stack temperatures. Both probes are designed for two 10 mm diameter traps (smaller trap adapters also available). The paired sorbent traps are inserted at the inlet end of the probe, using leak tight compression fittings before inserting directly into the flue gas stream.

The probe is heated to prevent any liquid condensation in the sorbent traps. An insulated, powder-coated aluminum probe head enclosure minimizes condensation at the junction between the probe and the heated umbilical/sample line.Accessories on next page.

Accepts MostSorbent Trap

Configurations

Method 30b

Appendix K

Appendix K RATA

Probe

Packing GlandMonorail

J- hook

Flange



heated Umbilical/Sample LinesThe umbilical/sample lines are available in various lengths and options: self-regulated heated and with or without pitot lines to meet the needs of customer applications.

Product description

10MMNU-S Nut, 10 mm Stainless Steel Tube

10M-F-TG TFE/GLS, 10 mm Glass-Filled Teflon Single Ferrule

10M-F-TG-DZ TFE/GLS, 10 mm Glass-Filled Teflon SingleFerrule, Dozen

HGP-STA Small Trap (6mm) Adapter for Mercury Probes. Includes 10MTUR6M-S (with 10mm Nut and ferrule) and Three 1/4” Ceramic Ferrules.

4NU-S Nut, 1/4 Tube, Stainless Steel

4F-C Ferrule, 1/4 Tube, Ceramic Teflon

Replacement Parts

Umbilical Length

Replace -�- with Umbilical/Sample Line LengthAdditional length without pitot $40.00 per ft.Additional length with pitot $45.00 per ft.

Sample Line

HGU-�HD

Sample Line with PitotHGU-�HDP

15 15’ Appendix K. Heated, dual Sample Lines (1/4”) Type K Thermocouples. Probe Power Cord. 120VAC.




heated Umbilical/Sample Lines

MERCURY PRObE ACCESSORIESProbe accessories are sold separately. Products can be custom made, so please call for any specific item.

Product description

PF-4/40CLS 4” Bored Pipe Flange, 150 lb. Pattern, Stainless Steel, 2.670 Bored Diameter Welded Cam and Groove Connector (for probes without pitot option, with tube outer sheath) with 2-1/2” Cam-Lock Connections.

PF-6/40CLS 6” Bored Pipe Flange, 150 lb. Pattern, Stainless Steel, 2.670 Bored Diameter Welded Cam and Groove Connector (for probes without pitot option, with tube outer sheath) with 40” cam-lock connections.

PF-4/6UCLS Flange Plate, Universal, 4”/6” Port with 2-1/2” Cam-Lock Connections.

PF-6PG38S 6” Pipe Flange, 150 lb. Pattern, Stainless Steel, with 2” Pipe Packing Gland (for use with probes with pitot option, pipe oversheath).

PF-4PG38S 4” Pipe Flange, 150 lb. Pattern, Stainless Steel, with 2” Pipe Packing Gland (for use with probes with pitot option, pipe outersheath).

PG-32/40CL 2” Oversheath Packing Gland, Steel Body, TFE Packing (for use with PF-40CLS flange) with Cam and Groove Connector.

Flanges & Packing Glands

PF-4/6UCLS

PG-32/40CL

Product description

P1000-9 9’ with Chain, L-Bracket and Hardware, use w/ 4’ or 6’ probes

P1001-10 10’ Heavy Duty, Channel, with Chain, L-Bracket and Hardware, for use with lengths over 6’. Add $11 per LF

P2751 Swivel Frame Trolley with Eye-bolt, 12” Chain and Quick Link

HGP-1SJ Mercury Probe Support “J” Hook attaches to standard Monorail

10MMNU-S-EXThGP-STA

10M-F-TG

PF-4/40CLS PF-6/40CLS

hGP-1SJP1000-9

P2751

Monorail & hooks



XC-60 METER CONSOLEThe XC-60 Source Sampling Console is a small, lightweight and economical sampling unit designed for portability. At less than 22 pounds, the model is easy to take anywhere. The XC-60 comes with a sample pump, dry gas meter, rotameter, fine and coarse controls valves, and five Type-K thermocouple inputs. Several models available. Suitable for U.S. EPA Methods, NIOSH methods, mold testing, asbestos testing, and more.

XC-60 GAS SAMPLER

Features • Precision Gas Meter w/Optical Encoder (standard)• Durable UHMW Polyethylene Case with Built-In Handle• Digital Temperature Display• Needle Valve for Precise Flow Control• Stainless Steel Quick Connect• Digital Elapsed Timer• Up to Five External Temperature Inputs• Dual Scale Vacuum Gauge

XC-60 -

Version A, B , or CA:100-1000ccmB: 0.2-2.4 LpmC: 0.2-4.0 Lpm

V: 240VAC~no charge

XC-60 Meter Console

Specifications

Gas Meter: Model AP25, positive displacement diaphragm type 0.7 liters per revolution. Optical encoder sensor, Gas volume totalizer with an 8 digit LCD Display, Quadrature pulse output, 1 cc resolution (standard).Sample Pumps: hargrave bTC II Series Pump - Dual head miniature pump, brush motor, 12VDC. Max unrestricted flow 11 LPM, Maximum Vacuum Range 0-20 in. Hg.

KNF N815 Series - Mini diaphragm vacuum pump, eccentric. Ryton pump head, CR Diaphragm, EPDM Valves, 15 LPM Flow, Maximum Vacuum 26 in. Hg110V/60Hz.Probe Temperature Control: Compact, 1/32 DIN autotuning indicating temperature controller with external 25 amp solid state relay. 4-Pin Circular Connector, Standard Type-K Jack for TC input.

Temperature display: 3.5 Digit LED display (-105°F to 1372°F), Type-K Display and controller are reset-table for OC upon request (OC is standard for export).Vacuum Gauge: Dual Scale, 0-30” Hg/0-100kPa.

Sample Inlet: 1/4” stainless steel quick-connect.

Power: 115 VAC/60 Hz ; 240 VAC/50 Hz (optional).

dimensions: HxWxD: 21” x 9.5” x 14” x (53 cm x 24 cm x 35.5 cm).

Weight: 21.6 lbs (9.8 kg).

Applicable to U.S. EPA Methods:• Method 4A Moisture Determination.• Method 6 Sulfuric Acid Mist and SO2.

• Method 11 Hydrogen Sulfide in Petroleum Refinery Gas Streams.• Method 18 Integrated Bag Sampling for Organic Compounds.• Method 26 Hydrogen Halides And Halogens• VOST Methods (Volatile Organic Compounds).• Any Sampling Method Requiring Accurate Volume Measurement at low sample rates (0.3 - 4 lpm).

Model description

XC-60A Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 100-1000 CCM, 120 VAC/60 Hz. Hargrave BTC II Series Pump.

XC-60A-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 100-1000 CCM, 240V/50 Hz. Hargrave BTC II Series Pump.

XC-60B Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 2.4 LPM, 120 VAC/60 Hz. Hargrave BTC II Series Pump.

XC-60B-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 2.4 LPM, 240V/50 Hz. Hargrave BTC II Series Pump.

XC-60C Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 4 LPM, 120 VAC/60 Hz. KNF N815 Series.

XC-60C-V Meter Console w/ Optical Encoder and Temperature Controller with DGM-AP25, Rotameter 0.2 - 4 LPM, 240V/50Hz. KNF N815 Series.

Sampler Console



VOST ANd METhOd 6 TYPE SOURCE SAMPLER CONSOLEThe MC623 Source Sampler Console (MC-623) is applicable for U.S. EPA Methods 4, 6, 11, 18, 26, VOST, and Methods 0030 and 0031. It can be used for any method requiring accurate volume measurement of low sample rates, typically 0.3 to 4 liters per min-ute. The console features a small lightweight dry gas meter fitted with an optical encoder and resetable digital volume totalizer. The internal diaphragm pump is corrosion resistant and rated for up to 6 liters per minute free flow. The gas meter temperature, and up to five remote temperatures, are measured with Type-K thermocou-ples and displayed with a digital temperature display (LED). Three digital temperature controllers are standard for accurately maintain-ing probe and filter temperatures and auxiliary heater temperature (when applicable). The source sampler console is housed in a sturdy lightweight vented aluminum cabinet featuring all stainless steel hardware and three carrying handles. The console is easily serviced by simply unlatching the front panel latches and sliding out the chassis, allowing full access to all components. Standard with all stainless steel fittings and quick connects.

Add “V” to end of product number for 240 VAC/50 Hz option.

MC-623 VOST and Method 6 Type Source Sampler Console

Features• Metric Precision Gas Meter w/Optical Encoder (1.0ccm resolution, zero reset) • Digital Temperature display • Flowmeter • Automatic Temperature Controllers (probe, filter and auxiliary) • Elapsed Minute Timer• Includes Internal Pump• Stainless Steel 1/4” Sample Quick Connects & Fittings

. Specifications

Gas Meter: Positive displacement diaphragm, 45 lpm maximum and 0.33 lpm minimum recommended flow rate. 8 digit LCD display with push button reset for volumetric totalizer. Factory set 0-99999.999 liter totalizer resolution.

Flowmeters: Solid Machined Acrylic (100-1000 ccm), (0.2 - 2.4 Lpm), (4.0 Lpm).

Temperature Control: Compact, 1/32 DIN autotuning indicating temperature controller with external 25 amp solid state relays.

Temperature display: 3.5 digit red LED display, -200°C to 1250°C range, 1°C resolution with external 6-channel selector switch.

Sample Pump: Double-Diaphragm with12 VDC Motors, Max Vac. 20” Hg.

Power: 120 VAC/60 Hz Standard, 240 VAC/50 Hz Optional.

Umbilical Connections: Electrical: 4-Pin Circular Connector.

Sample Line: 1/4” Quick Connects.

Thermocouples: Type-K, Standard Size.

dimensions: HxWxD: 14.5” x 16” x 10.5” (36.8 cm x 40.6 cm x 26.7 cm).

Weight: 28 lbs (12.7 Kg).

Sampler ConsolesProduct description

MC-623A 100 - 1000 ccm

MC-623A-V 100 - 1000 ccm

MC-623B 0.2 - 2.4 lpm

MC-623B-V 0.2 - 2.4 lpm

MC-623C 4.0 lpm

MC-623C-V 4.0 lpm

Model A, B , or CA:100-1000ccm B: 0.2-2.4 Lpm C: 4.0 Lpm

V: 240VAC~no charge

MC-623 Meter Console



MINIATURE PRobE ASSEMbLIES & LINERSMINIATURE PRobE

Miniature Probe Assembly

8

8

Miniature Liners

STAINLESS STEEL AdAPTERS

Stainless steel adapter, #12/5 socket to 1/4” tube fitting.MGA-12S4

Stainless steel adapter, #12/5 Ball to 1/4” tube fitting.MGA-12b4

Model description

MGNS-12B Glass Adapter, 12/5 Ball to #15 Thread

Miniature Probe Accessories

Model description

MPS-36H 36 inch Miniature Heated Probe sheath, 3/4 inch OD Sheath, 120 VAC (Liner not included).

MPS-48H 48 inch Miniature Heated Probe Sheath, 3/4 inch OD Sheath, 120 VAC (Liner not Included).

MPS-60H 58 inch Miniature Heated Probe Sheath, 3/4 inch OD Sheath, 120 VAC (Liner not Included).

Miniature Probe Assemblies Miniature Probe LinersModel description

MPL-36G1 36 inch, 8 mm (5/16”) OD, Pyrex Liner with 12/5 Ball Joint

MPL-36G2 36 inch, 8 mm (5/16”) OD, Pyrex Liner with Glass Cup (No Ball Joint)

MPL-36G4 36 inch, 8 mm (5/16”) OD, Pyrex Liner, Plain Both Ends (No Ball Joint)

MPL-36G5 36 inch, 6 mm (1/4”) OD, Pyrex Liner, Plain Both Ends (No Ball Joint)

MPL-48G1 48 inch-8mm Pyrex Liner with 12/5 Ball Joint

MPL-48G2 48 inch Pyrex Liner (8mm) with Glass Cup (No Ball)

MPL-48G4 48 inch-8mm Pyrex Liner, Plain Both Ends

MPL-48G5 48 inch Pyrex Liner, 1/4 inch, (No Ball Joint)

MPL-60G1 60 inch-8mm Pyrex Liner with 12/5 Ball Joint

MPL-60G2 60 inch pyrex liner (8mm) with Glass Cup (No Ball Int)



Stainless Steel #12/5 socket elbow to 1/4” tube fitting.MGA-12SEL4

PTFE AdAPTERS

Glass filled PTFE Adapter, 12 mm ball to 5/16” tube fitting, MPL probe liner adapter.MGA-12b5TG

Glass filled PTFE Adapter, 12 mm socket to 5/16” tube fitting, MPL probe liner adapter.MGA-12S5TG



SK-606 Method 6

VSb4 with PC-3/4

VERSACASE

VersaCase4 Sample Case with hinged, removable doors. Does not include probe clamp.Inside cabinet dimensions: HxWxD 9.5” x 12.5” x 6.75” (24.1 cm x 31.8 cm x 17.1 cm).

VSB4

VersaCase products are sturdy, reliable items for use in many U.S. EPA methods. Apex Instruments has an array of Versacase products available for any source testing need.

VSb2 VERSCASEThe VSb2 VersaCase is a lightweight portable lab frame ideal for supporting complex glassware setups. Originally designed to complement the Model 623 Source Sampler Console for Volatile Organic Sampling (VOST). Unit features a pre-punched panel with a combination handle/monorail bracket, coolant reservoir brackets (accomodates standard modular impinger cases), and removable front and rear doors. Interchangable probe clamps for 3/4” and 1” sheaths are available. Call for details on customized kits for other testing methods.dimensions: HxWxD: 24” x 12” x 11” (61 cm x 30.5 cm x 27.9 cm).

VSB2

Features• Lightweight: 5.5 lbs (2.5 kg)• Slotted Probe Clamp Mount for Different Height Glassware• Handle/Monorail• Hinged Removable Doors• Umbilical Support Bracket

VSb2(shown open with blank panel)

Model description

PC-3/4 Stainless steel hinged probe clamp (for 3/4” OD Probe)

PC-3/4E Extended stainless steel hinged probe clamp (accepts MFH-25CA)

MSB-1 Insulated midget impinger sample tray with drain valve

ICE-20 Small Ice Pack, blue gel

VSb Options

The VersaCase Umbilical Cable (VU-) includes four Type-K thermocouple extensions, 1/4” quick connects, sample line and three plug-in jacks terminating in a sturdy aluminum junction box. Standard with stainless steel fittings and quick connects. Other lengths available upon request.Add “V” to end of product number for240 VAC/50 Hz option.

30’ VersaCase Umbilical with Connection Box, 1/4” stainless steel quick connect.

VU-30

60’ VersaCase Umbilical with Connection Box, 1/4” stainless steel quick connect.

VU-60 90’ VersaCase Umbilicalwith Connection Box,1/4” stainless steelquick connect.

VU-90

VERSACASE UMbILICAL

SUPERVOST SAMPLING KIT, SK0031Kit for VersaCase2 with 110 Volt Pump: VSB2, PC3/4, V31-CGS, VC31-SET, MPS-36H, MPL-36G2 (3x), VU-30, MM5-P, SB-3.

SK-0031

VSb2(exterior)



MIdGET GLASSWARE & ACCESSORIES (METhOd 6)Midget glass impingers feature unground double O-Ring 24/40 taper joint and 12/5 O-Ring ball joints. Bottle capacity is 40ml. The Insulated Sample Tray with drain Valve (MSb-1) can hold a Midget Glassware Set (MGN-CGS) and two nontoxic Ice Packs (ICE-20). The ice packs allow quick turn around. At the end of the run simply remove the ice packs and drain the water before purging. Set includes impingers (plain and orifice), U-Tubes, Connectors and Clamps.

MSb-1 With Glassware Set(Method 6)

Midget Impinger AssemblyMidget Impinger Assembly with plain stem (#12/5 unground O-Ring ball joints).

mgn-1a

Midget Impinger AssemblyMidget Impinger Assembly with orifice stem (#12/5 unground O-Ring ball joints).

mgn-1aO

Midget U-TubeMidget U-tube with 12/5 unground socket joints.

mgn-2

Midget Knockout Impinger AssemblyMidget Knock-out Impinger Assembly (#12/5 unground O-Ring ball joints).

mgn-1aK

Midget Impinger InsertMidget Impinger Insert with plain stem (#12/5 unground O-Ring ball joints).

mgn-1i

Midget Impinger InsertMidget Impinger Insert with orifice stem (12/5 Unground O-Ring ball joints).

mgn-1iO

MIdGET GLASSWARE

Midget ConnectorL-Connector with 12/5 sockets.

mgn-6

Midget Impinger bottleMidget Impinger Bottle with unground taper joint.

mgn-1B

The Apex Instruments Method 6 and Method 26 Sampling Kits are normally used in conjunction with the XC-60 or Model 623 Source Sampler Console or alternative metering devices. The midget impingers

can be used for many methods, including NIOSh and OShA methods. The Method 6 Sampling Kit (SK-606) can be modified for U.S. EPA Method 26 with the addition of the SK-626 Kit.

Packing List

Packing List

MIdGET GLASSWARE SET (INCLUdES):• 4 Midget Impingers (3 MGN-1A, 1 MGN-1AO)• 3 Midget U-Tubes (MGN-2)• 1 L-Connectors with 12/5 Sockets (MGN-6)• 10 12/5 Ball Joint Pinch Clamps (bS12)

mgn-CgS

MGN-CGS Midget Glassware Set

Insulated Sample Tray with drain Valve.mSB-1

Ice Packs.iCE-20



Glass 3-way Valve with #12/5 unground socket joints, inlet and outlet, ball joint purge. mgn-3SB

Glass 3-way Valve with #12/5 unground socket joints. mgn-3

Glass adapter, #12/5 unground socket to 1/4” tube.mgn-12S4

Glass Adapter, #12/5 socket to #18 thread.

mgnS-12S/18

Glass adapter, #12/5 unground O-Ring ball to 1/4” tube.mgn-12B4

Ungrounded glass adapter, #12/5 ball to #18 thread.mgnS-12B/18

Glass 3-way valve Glass Adapters

Model description

GA-GL-18B Bored Cap, GL #18 Threads

GA-GL-18S Silicone Seal Ring, 8 mm Hole Diameter

GA-18T6 PTFE Seal Ring, 6 mm Hole Diameter

GA-18T8 PTFE Seal Ring, 8 mm Hole Diameter

GL #18 Cap and Seals

MIdGET GLASSWARE & ACCESSORIES (CONTINUEd)

Impinger Outlet with thermocouple and tubing, #12/5 stainless steel socket. For use with midget glass impinger (MGN-1A).

mga-101

Impinger Outlet with thermocouple and 1/4” straight tube for use with PTFE Impingers (MGT-1)

mgS-101

Pinch Clamps

ball Joint ClampStainless steel #12/5 ball joint clamp.

BS12

Keck ClipPlastic Keck Clip, Size 13, for #12/5 ball joints.

KBS-13

ball Joint ClampStainless steel #12/5 ball joint clamp, Pyrex® with screw.

rC-13

MIdGET ACCESSORIES

Viton O-Ring for grooved #12/5 ball.

O-011V

Viton O-Ring for grooved #12/5 Ball, DOZEN.

O-011V-DZ

Impinger Outlets

O-Rings

MidgetPFA Impinger

Model description

MGT-1 Midget PFA Impinger with Two 1/4” Tube Unions, 60 ml Volume

MGS-2T6 TFE U-Stem (1/4” OD)

MGS-3T6 TFE L-Stem (1/4” OD)

4SC4-PFA PFA Tube Union, 1/4”

PFA Impingers

MERCURY & GAS SAMPLING EQUIPMENT - Apex …old.apexinst.com/distcorn/PDF's/catalog/2010 Catalog...

Documents

Transcript of MERCURY & GAS SAMPLING EQUIPMENT - Apex …old.apexinst.com/distcorn/PDF's/catalog/2010 Catalog...