MEOS 2017 - Baker Hughes · When times are tough, innovators think about ways to make things...
Transcript of MEOS 2017 - Baker Hughes · When times are tough, innovators think about ways to make things...
When times are tough, innovators think about ways to make things better.
But turning ideas into reality takes energy.
Join Baker Hughes for a behind-the-scenes look at how technology really gets developed. We will share some of the ideas that have us intrigued, the pioneering work that goes on as we develop technology, and the things that might not work today – and what could make them work tomorrow.
It’s all about bringing energy to innovation.
ENERGY OF INNOVATION SPOTLIGHT PRESENTATION Think. Act. Heal: Learn how tomorrow’s autonomous technology can transform our industry
Tauseef Salma | Vice President, Enterprise Technology
Tuesday, 7 March 10:00 and 13:00
Learn Why Not All ICDs are Created Equal
Minimize OPEX and maximize production and recovery with dependable designs
Control. Confirm. Ream.
Enhance efficiency and quality with intelligent reaming
Take Less Time. Use Less Fluid. Spend Less Money.
Step ahead of the efficiency curve in unconventional completions
Take the Rig Out of the Workover
Minimize deferred production, extend recovery, and prolong ESP life
Intervene with Precision
Get the most from underperforming wells
Tues 9:00 | Tues 14:00 | Wed 10:30 | Wed 13:30 | Thurs 10:00
Tues 9:30 | Tues 14:30 | Wed 11:00 | Wed 15:00 | Thurs 10:30
Tues 10:30 | Tues 15:00 | Wed 9:00 | Wed 11:30 | Thurs 11:00
Tues 11:00 | Wed 9:30 | Wed 14:00 | Thurs 9:30 | Thurs 13:30
Tues 11:30 | Wed 10:00 | Wed 14:30 | Thurs 9:00 | Thurs 11:30
In-B
ooth
Pre
sent
atio
ns
Tuesday, 7 March Wednesday, 8 March
Time Topic
9:00 Learn Why Not All ICDs are Created Equal
9:30 Control. Confirm. Ream.
10:00ENERGY OF INNOVATION SPOTLIGHT PRESENTATION Think. Act. Heal: Learn how tomorrow’s autonomous technology can transform our industry
10:30 Take Less Time. Use Less Fluid. Spend Less Money.
11:00 Take the Rig Out of the Workover
11:30 Intervene with Precision
13:00ENERGY OF INNOVATION SPOTLIGHT PRESENTATION Think. Act. Heal: Learn how tomorrow’s autonomous technology can transform our industry
14:00 Learn Why Not All ICDs are Created Equal
14:30 Control. Confirm. Ream.
15:00 Take Less Time. Use Less Fluid. Spend Less Money.
Time Topic
9:00 Take Less Time. Use Less Fluid. Spend Less Money.
9:30 Take the Rig Out of the Workover
10:00 Intervene with Precision
10:30 Learn Why Not All ICDs are Created Equal
11:00 Control. Confirm. Ream.
11:30 Take Less Time. Use Less Fluid. Spend Less Money.
13:30 Learn Why Not All ICDs are Created Equal
14:00 Take the Rig Out of the Workover
14:30 Intervene with Precision
15:00 Control. Confirm. Ream.
In-B
ooth
Pre
sent
atio
ns
Thursday, 9 March
Time Topic
9:00 Intervene with Precision
9:30 Take the Rig Out of the Workover
10:00 Learn Why Not All ICDs are Created Equal
10:30 Control. Confirm. Ream.
11:00 Take Less Time. Use Less Fluid. Spend Less Money.
11:30 Intervene with Precision
13:30 Take the Rig Out of the Workover
BUMPSTER Wireless Speaker
BarMeeting Room
Store RoomA/V
Kitchen
Presentation Area
Reception
1
2
3
4
5
7
6
8 921
20
1918
17
16
15
14
12
13
22
23
11
10
Bake
r Hug
hes
Boot
h
BarMeeting Room
Store RoomA/V
Kitchen
Presentation Area
Reception
1
2
3
4
5
7
6
8 921
20
1918
17
16
15
14
12
13
22
23
11
10
1. BASTILLE™ HP/HT Removable Production Packer
2. EQUALIZER JET™ Stimulation Flow Control Device
3. OptiStriker™ Straddle Packer System
4. CAPSTONE™ Wireline-Retrievable Well Barrier
5. TransCoil™ Rigless-Deployed ESP System
6. SureSENS™ SPTV Gauge System and SureSENS™ QPT ELITE Gauge System
7. Plug-and-Perf Solutions: § SPECTRE™ Disintegrating Frac Plug § FLASH™ Composite Frac Plug with Efficiency Valve § TORPEDO™ Composite Frac Plug
8. Artificial Lift Solutions § CENesis Curve™ Tight-Radius ESP System § CENesis PHASE™ Multiphase Encapsulated Production Solution § CENtigrade™ Extreme Temperature ESP Systems
9. CENtrilift PASS™ Slimline ESP System
10. Drilling and Completion Fluids
11. Drill Bit Systems § Talon™ Force High-Velocity PDC Drill Bit with StayTrue™ Shaped Diamond Element Technology § Kymera™ XTreme Hybrid Drill Bit
12. FTeX™ Advanced Wireline Formation Pressure Testing Service
13. Integrity eXplorer™ Cement Evaluation Service
14. Cementing Services
15. Reservoir Stimulation Services
16. Production Chemical Solutions § RESTORE™ Wellbore Remediation Program § CRONOX™ Corrosion Control Solutions
17. GaugePro™ Echo On-Command Digital Reamer
18. VisiTrak™ Reservoir Navigation and Analysis Service
19. TeleCoil™ Intelligent Coiled Tubing Service
20. AutoTrak™ Rotary Steerable Systems
21. FASTrak™ HD LWD Fluid Analysis Sampling and Testing Service
22. Subsurface Modeling
23. Production Analytics
Stop by the Baker Hughes booth when you need a few moments away from the crowd to:
RECHARGEConnect to our complimentary cell phone charging tables
REFRESHBe our guest for an assortment of fresh snacks and beverages
REVIVEEnjoy learning about our latest technologies during our In-Booth presentations
MEOS is the perfect place to meet old friends, hear new ideas, and see the latest innovations in technology.
Station 5 14:30 - 15:15
14:30 183873 - ESP Pump Considerations for Thermal Recovery Applications
D.F. McManus, B. Coates, C. Montilla
Station 6 14:30 - 15:15
14:30 183915 - Beginning with the End in Mind: Shaped Charges Designed for Reservoir Conditions
R.P. Satti, D. Betancourt, B. Harvey, S.N. Zuklic, R. White, D. Ochsner, T. Sampson, W.D. Myers, J. Gilliat
Station 7 14:30 - 15:15
14:30 184007 - Rock Texture Characterisation from Automated Petrographic Analysis
M. Hussain, N. Minhas, B. Saad, A.J. Nair,
Tuesday, 7 March
Thursday, 9 MarchWednesday, 8 March
Wednesday, 8 March (cont.)Time Paper Number/Title Authors
Station 3 14:30 - 15:15
14:45 183937 - Hybrid Drill Bit Technology Achieves Breakthrough Performance in Challenging 16’’ Section - Gas Wells in Saudi Arabia
H. AlHomoad, P. Rojas, F. Valbuena, Baker Hughes; W. Ortiz, K. Nawaz, T.S. Mukherjee, S. Mubarak, M.T. Shuwiayah, Saudi Aramco
Station 5 14:30 - 15:15
14:45 183997 - High Density Fluids Customisation and Field Application in Khursaniyah Challenging Wells
A.V. Addagalla, P.B. Jadhav, B.A. Kosandar, I. Lawal, A. Imran, O. Hassan, Baker Hughes; A. Gadalla, R. Pino, P. Ezi, N. Zayer, M. Hudhaithi, Saudi Aramco
Time Paper Number/Title Authors
Station 6 14:30 - 15:15
10:30 183957 - An Innovative ICD Design Workflow to Balance Flux Equalisation and Well Productivity in Horizontal Wells
S. Abu Faizal, A. Galimzyanov, Baker Hughes; B.O. Lee, Saudi Aramco
Time Paper Number/Title Authors
Station 3 10:00 - 11:00
10:15 183954 - Synthetic Iron Sulfide Scale and Polymeric Scale Dissolvers
T.B. Hafiz, A. AlSuwaij, M. Hoegerl, A.A. Almathami
Station 4 10:00 - 11:00
10:15 183814 - First Five-Zone Smart Completion Technology Deployment in ERC Well
G.D. Mendes, Baker Hughes; A. Alzahrani, M.A. Al-Amri, K.S. Al-yateem, Saudi Aramco
Station 5 10:00 - 11:00
10:15 183799 - Emerging High Temperature Well Stimulation Diversion Technology Leads to Significant Increases in Conductivity
N. Spurr, D.A. Castillo, F. Debenedictis, Baker Hughes; H.D. Brannon, Sun Drilling
*Cur
rent
as
of F
ebru
ary
8, 2
017
MEOS is the perfect place to meet old friends, hear new ideas, and see the latest innovations in technology.
ePos
ter
Sess
ions
*
Tech
nica
l Pap
ers*
Session 17: Production Enhancement
8:50 183848 - Influence of Near-Wellbore Stress Field Variation on the Success of Hydraulic Fracturing: Experiences from the Middle East
J. Vossen, S. Perumalla, W. El Sherbeny, A. Mendez
9:30 183842 - Developing a Robust Inflow Control Device Suitable for High Rate Injection
J. Snitkoff, B. Fisher, T.A. Abdelfattah
Session 20: Completion Technology
10:30 183837 - Capillary Based Surface Controlled Subsurface Safety Valve Systems Solution for Problematic Wells
A.N. Wagner
Session 22: Drilling and Completion Fluids
11:10 183945 - New Phase Transformation Fluid Based Loss Circulation Material: Hi-Strength, Year Round Use to Cure Severe to Total Loss in Reservoir and Non Reservoir Sections
P. Yadav, P. Sarmah, G. Agrawal, P.B. Jadhav, B.A. Kosandar, N. Al Tawat, A. Addagalla
Session 29: Formation Evaluation
15:40 183953 - Determination of True Formation Resistivity from LWD Conventional Resistivity Measurement in a Horizontal Well
S. Fang, D. Boesing, S. Wessling
Session 33: Sand Control
Chairperson: Ivo Nuic
15:20 183947 - Open Hole Sand Control Optimisation using Shape Memory Polymer Conformable Screen with Inflow Control Application
G. Osunjaye, T.A. Abdelfattah
16:00 183891 - Implementing a Scientific Perspective and a Pragmatic Approach to Optimising Perforated Completions
S.N. Zuklic, R.P. Satti, D. Bale, W.D. Myers, T. Sampson
Tuesday, 7 March
Wednesday, 8 March
Wednesday, 8 March (cont.)
Time Paper Number/Title Authors
Session 1: Intelligent Completion Technology
Chairperson: Ivo Nuic
Session 5: Scale and Corrosion Management
14:00 183778 - The Application of Solid Inhibitor for Calcium Sulfate Scale Control under High Pressure and Temperature Conditions
D. Shen, S. Bhaduri, M.Q. Vo, P.S. Carman, D.V. Gupta, Y. Pandey
Session 6: Cementing and Wellbore Isolation
13:40 183834 - Water Swell Packers with High Salinity Tolerance and Increased Performance Envelope
A.K. Sadana, X. Wang, C. Cook, G. Badke
Session 9: Production Management
15:20 183904 - Increasing Oil and Gas Production by the Application of Black Oil Foamers
S. Lehrer, S. Chakraborty
Session 12: Numerical Modelling for Fractured Reservoirs
15:00 183818 - Numerical Study of Wall Roughness Effect on Proppant Transport in Complex Fracture Geometry
H. Zhang, P. Yuan, X. Huang, J. Han, A. Mezzatesta, Baker Hughes; J. Bao, Pacific Northwest National Laboratory
16:00 183819 - Study of Proppant Erosion in Multistage Hydraulic Fracturing Using Computational Fluid Dynamics Modelling
H. Zhang, P. Yuan, X. Huang, J. Han, Q. Zhou, A. Mezzatesta, Baker Hughes; J. Bao, Pacific Northwest National Laboratory
Time Paper Number/Title Authors
Session 14: Drilling Bits Solution
Chairperson: Imran Butt
8:50 184026 - Multiple Deployments of Hybrid Drill Bits with Optimised Drilling Systems Prove Enhanced Efficiency in North Kuwait Development Wells
M.G. Omar, W. Agawani, A. Abdelhamid, Baker Hughes; A. Al Ajmi, M. Al-Ghareeb, A.S. Al-Rushoud, Kuwait Oil Company
Thursday, 9 March
Time Paper Number/Title Authors
Session 38: Facilities Design and Optimisation
9:20 183974 - Effective Removal of Sour Gases Containing Mercaptans in Oilfield Applications
S. Chakraborty, S. Lehrer, S. Ramachandran
Session 39: Energy New Technology and Innovation
9:00 183857 - Elastic Carbon Composite and its Use as Ultrahigh Temperature Packer Element
Z. Xu, L. Zhao, P. Ganguly
Session 40: Shale Reservoirs
9:40 183833 - Evaluation of Pore Size Distribution Effects on Phase Behaviour of Hydrocarbons Produced in Shale Gas Condensate Reservoirs
B. Li, A.G. Mezzatesta
Session 41: Reservoir Description
11:40 183883 - Using Digital Rock Modelling to Estimate Permeability and Capillary Pressure from NMR and Geochemical Logs
P. Yuan, H. Zhang, J. Wu, A. Mezzatesta, G. Jin, R.P. Satti, Baker Hughes; N. Koliha, J.F. Bautista, B. Crouse, D. Freed, EXA Corporation
Session 43: Artificial Lift
11:00 183821 - Field Deployment of a Rigless Cable Deployed ESP using a Vertical Wellhead
J.J. Mack, Y.S. Sarawaq, R. Reid, Baker Hughes; B.A. Roth, J. Xiao, M. Abdelaziz, Saudi Aramco; A. Helvenston, GE
11:20 183882 - Evaluating the Performance of Advanced ESP Motor Technology in a Steam Assisted Gravity Drainage (SAGD) Field in Canada
C. Montilla, B. Coates, O. Padilla, Baker Hughes; J.K.Graham, Suncor Energy
Session 47: Well Integrity
14:10 183990 - All Terrain Efficient a New Electromagnetic Cement Evaluation Tool; Effectively Defining Cement Sheath Quality Where Evaluation Was Not Possible
K. Azim, P. Iqbal
Session 48: Unconventional Exploration
13:50 183919 - Wettability and Pore Structure Characterisation of Laminated Carbonate Source Rocks
H. Kesserwan, G. Jin, G. Agrawal
Session 49: Directional Drilling - Reliability and Performance
Chairperson: Nick Nawfal
13:50 183900 - Development of an Efficient Vibration Modeling Technique for Design-Related Optimisation of Tools in the Global Drilling Environment
A. Hohl, D. Heinisch, H. Oueslati, C. Herbig, H.Reckmann
14:30 183823 - Erosion Prediction of Mud Pulse Telemetry Tools: Numerical Simulation and Field Studies
P. Yuan, B. Yu, H. Solomon, H. Zhang, J. Stevens, A. Mezzatesta, Baker Hughes; P. Gonuguntla, Tridiagonal Solutions
Session 50: Integrated Characterisation
14:10 183845 - Integration of Advanced Cuttings Analysis and Fluid Typing with NMR and Acoustics Logs for Petrophysical Log Interpretation Without Radioactive Sources
O. Mohnke, A. Bartetzko, N. Ritzmann, I. Aarnes, H.F. Thern
Thursday, 9 March (cont.)
*Cur
rent
as
of F
ebru
ary
8, 2
017
Tech
nica
l Pap
ers*