MEMWaterproofing with MS Polymer

solutions for all types of applications

Waterproofing of basements

Waterproofing of flat roofs - repair of bitumen-felts

Waterproofing of roofs and of non-trafficable terraces

Roof repair in the areas with small leaks

With time, wind, snow, rain and sun create problems to your home. Damages or infiltrations may occur especially in the basement or on the roof which need to be removed. For instance, if moisture were to penetrate the masonry, it would bring on mould and the need for extra heating – eventually leading to higher maintenance costs (the rooms with moisture inside its walls require more power to reach the desired temperature than dry rooms).

MEM bitumen-based products -convince you from the very beginning.

Instructions for the use of MEM waterproofing products

Product name Composition

Field of use

Packing

Sublayer

FoundationsPolystyrene

insulated foundations

Exterior Interior MasonryBathrooms,

sanitary cabins, shower enclosures

Kitchens Terraces RoofsConcrete,

AeroconcreteMortar

MEM Bitumen solution for foundationwaterproofing

Solvent-free bitumen emulsion,fibre-reinforced and polystyrene grains added

28l; 12l

MEM Bitumen solution for foundation waterproofing - for normal soil moisture levels

Bitumen emulsion,solvent-free, with latex

1l; 5l; 10l

MEM Bitumen-based primerBitumen emulsion,for adherence,solvent-free

5l; 10l

MEM MSP solution for the waterproofing of terraces, bathrooms, kitchens, founda-tions and roofs

MSP based solution, sol-vent- and bitumen-free

290ml;

1kg; 6kg;14kg

MEM Roof repair bitumen-based sealing compound

Polymer-improved bitumen-based solution

1kg; 4kg;

7kg

MEM Bitumen ground coatfor sealablemembranes

Dispersion-based bitumen emulsion, solvent-free

5l; 10l

MEM Bitumen adhesivefor cold bonding ofbitumen membranes

Bitumen-baseddispersion adhesive

800g; 3kg;

6.5kg

MEM Bitumen adhesivefor bonding bituminousshingles

Bitumen adhesive for cold bonding

445g

MEM Bitumen-based solution for waterproofing ofroofs

Bitumen- and latex-basedroof sealant

1l; 5l; 10l

MEM Bitumen-basedrepair putty forroofs

Bitumen-basedsealant,solvent-free

MEM Sealant for joints,cracks, roof repairs

Bitumen paste withfibre content,solvent-free

300ml

MEM Acryl-based sealantfor outdoorrepairs

Acryl- and solvent-based sealant

375ml;750ml

MEM

PUTS AN END

Low-heating costs

www.temad.ro82

Sublayer

Consumption

Tools used for application

Masonry Sandstone BrickLime or cement

plasterwork

Stone, limestone

Wood MetalBitumen-

feltPolystyrene

Lime brush

Brush RollerPaint brush

Spray gun

Putty knife

Trowelscraping

iron

Siliconegun

3.7 - 4.9 l/sqm

220 - 250ml/sqm

250 - 300ml/sqm

2.3 kg/mp

1.4 kg/mp

100 - 200ml/sqm

600 - 800g/sqm

220 - 250ml/sqm

1 kg/mp

2 l/sqm

email: office@temad.ro 83

MS Polymer-based solution with multiple uses. Bitumen, silicone and solvent free. Instant sealing. No protection against moisture needed while curing. It can also be applied on moist sublayers. It forms an elastic, protecting, long-lasting layer.

MS Polymer solutions waterproofing for all types of applications: basements, flat roofs, non-trafficable terraces, balconies, waterproofing under floor tiles and wall tiles in bathrooms, kitchen and terraces

Code Product name pcs/box Consumption

700107 MEM MSP Sol. bath., kitch., terr. waterprf. 290ml c502 12

approx. 2 kg/m²700108 MEM MSP Sol. bath., kitch., terr. waterprf. 1kg c503 6

700109 MEM MSP Sol. bath., kitch., terr. waterprf. 6kg c504 1

700110 MEM MSP Sol. bath., kitch., terr. waterprf. 14kg c508 1

SO

= VALID BY SPECIAL ORDERSO

EN

VIR

ONMENT-FRIEND

LY

Make your work easier

If you want to take repairs into your own hands, then it is more simple, more efficient and more environment-friendly to use the MEM solvent-free bitumen range. It offers perfect protection and it is ideal for sealing and repairing roofs, floorings and basements.

Perfect sealing without using solvents

Its main goal is environment compatibility and durability. MEMhas completely renounced to the use of solvents in bitumen-based products manufacturing process. Thereby, the product application is not harmful for the environment or for human health as it does not release odours and there is no risk of explosion.

MS POLYMER SOLUTION FOR TERRACE, BATHROOM, KITCHEN, FOUNDATION AND ROOF WATERPROOFING

www.temad.ro84

Waterproofing of flat roofs

Waterproofing of basements

Bitumen primer used for the preparation of the surfaces to be treated with bitumen-based products. Recommended for absorbent, mineral bases, concrete supports, screed, mortar, sealant, plasterwork.

Waterproofing of flat roofs - repair of bitumen-felts

Code Product name pcs/box Consumption

700114 MEM Bitum. ground coat sealable membr. 5l c741 4 approx. 100 - 200 ml/m²

Waterproofing of basements

High quality thick bitumen layer, containing polystyrene and fibre-reinforced. Recommended for the professional waterproofing of external walls and for covering cracks. Also suitable for the installation of polystyrene insulation boards. Resistant to water salts and to mould.

Code Product name Consumption

700100 MEM Foundation waterproof. bit. sol. 12l c401 approx. 3.7 - 4.9 l/m²

Bitumen emulsion recommended for the waterproofing of concrete surfaces, plasterwork and foundations in contact with the soil, in the case of areas with normal soil moisture. The membrane is resistant to natural substances attacking concrete.

Code Product name pcs/box Consumption

700102 MEM Norm. u. foundation waterproof. bit. sol. 1l c823 6approx. 220 - 250

ml/m²700103 MEM Norm. u. foundation waterproof. bit. sol. 5l c824 1

700104 MEM Norm. u. foundation waterproof. bit. sol. 10l c740 1

BITUMEN GROUND COAT FOR SEALABLE MEMBRANES

BITUMEN SOLUTION FOR FOUNDATION WATERPROOFING

BITUMEN SOLUTION FOR FOUNDATION WATERPROOFING - FOR NORMAL SOIL MOISTURE LEVELS

email: office@temad.ro 85

EN

VIR

ONMENT-FRIEND

LY

RECOMMENDATION:

UNFOLD THE BITUMEN-FELT MEMBRANES PRIOR TO POSITIONING THEM IN ORDER TO EASE THEIR SUBSEQUENT APPLICATION.

Special bitumen-based adhesive for the application of bitumen shingles, of bitumen foils as well as of non-lined thermal insulation boards. The initial gluing is strong; repositioning is possible shortly after application.

Code Product name pcs/box Consumption

700118 MEM Bitum. adhes. for bond. bit. shingles 445g c734 12 as needed

Bitumen adhesive used for bonding roof bituminous membranes and foils one to another, as well as to concrete. The bonding is fast as from the beginning and the film formation occurs after 60 min. Recommended for roofs with a slope of maximum 5˚.

Code Product name pcs/box Consumption

700115 MEM Cold bitum. adhes. for bitum. membr. 800g c826 6approx.

600 - 800 g/m²700116 MEM Cold bitum. adhes. for bitum. membr. 3kg c827 4

700117 MEM Cold bitum. adhes. for bitum. membr. 6.5kg c828 4

BITUMEN ADHESIVE FOR BONDING BITUMINOUS SHINGLES

BITUMEN ADHESIVE FOR COLD BONDING OF BITUMEN MEMBRANES

www.temad.ro86

Waterproofing of roofs and of non-trafficable terraces

Bitumen membrane that protects and repairs bitumen layers on the roof, which are damaged by weather actions and which are slightly friable. It is resistant to natural substances attacking concrete. Not recommended for roofs made of PVC membranes.

Code Product name pcs/box Consumption

700119 MEM Roof waterproofing bitumen sol. 1l c820 6approx. 200 - 250

ml/m²700120 MEM Roof waterproofing bitumen sol. 5l c821 4

700121 MEM Roof waterproofing bitumen sol. 10l c739 1

Solvent-free bitumen solution used for the preparation of the supporting layer for the subsequent application of waterproofing bitumen-based layers and/or of the putty, as well as for the surface preparation for the subsequent cold application of the bitumen adhesive. Good penetration capacity into the porous supporting layer; optimum adherence.

Waterproofing of flat roofs and of non-trafficable terraces

Code Product name pcs/box Consumption

700105 MEM Bitumen-based primer 5l c431 4 approx. 100 - 200 ml/m²700106 MEM Bitumen-based primer 10l c432 6

Bitumen-based repair and reinforcement sealing compound, improved by polymerization. Ideal for repairing cracks, tears and holes in the bitumen coatings and the bitumen layers. Can be applied both on horizontal as well as on vertical surfaces.

Code Product name pcs/box Consumption

700111 MEM Roof repair bitum. seal. comp. 1Kg c829 6

approx. 1.4 kg/m²700112 MEM Roof repair bitum. seal. comp. 4Kg c830 4

700113 MEM Roof repair bitum. seal. comp. 7Kg c831 4

BITUMEN-BASED SOLUTION FOR ROOF WATERPROOFING

BITUMEN-BASED PRIMER

MEM ROOF REPAIR BITUMEN-BASED SEALING COMPOUND

email: office@temad.ro 87

EN

VIR

ONMENT-FRIEND

LY

Roof repair in the areas with small leaks Roof repair in the areas with small leaks

Solvent-free bitumen putty containing fibres, destined for repairing cracks, joints, grooves etc. Suitable for the insulation of joints between chimneys and masonry, of roof antennas and of masonry loose pieces.

Acrylic fibre and carbon fibre reinforced sealant destined to repairs in critical areas. Instant waterproofing, even though applied during rain, snow or frost. UV-resistant, bitumen, tar and asbestos-free.

Code Product name pcs/box Consumption

700123 MEM Sealant for joints, cracks 300ml c735 12 as needed

Code Product name pcs/box Consumption

700124 MEM Acryl-based sealant 375ml c220 8 2 kg/m² according to the layer thickness700125 MEM Acryl-based sealant 750ml c221 12

Solvent-free bitumen putty recommended for repairing large and small roof leaks or for repairing air pockets emerged in the older roof layers.

Code Product name pcs/box Consumption

700122 MEM Roof repair bitumen putty 1kg c211 61 kg/m² for each mm

of thickness

SEALANT FOR JOINTS, CRACKS, ROOF REPAIRS

ACRYL-BASED SEALANT FOR OUTDOOR REPAIRS

MEM BITUMEN-BASED REPAIR PUTTY FOR ROOFS

www.temad.ro88