Megashor

Ultra heavy-duty shoring

MegashorsoarHeavy duty modular propping system designed

for axial loads of up to 1,000kN

Features & Benefits

• High Load: Up to 1,000kN per leg and 4,000kN per tower

• Unlimited Options: Can be assembled into props, towers, trusses and various other shapes

• Flexibility: Superslim Soldiers provide restraint to Megashor and they can be used at various lengths and angles

• Accessories: Megashors full range of accessories makes its highly versatile

• Limiting Disruption: Megashor is approved for support of bridges that are open to live traffic

• Quality: Quality assured manufacturing process results in consistent assembly alignment onsite, saving on modifications and labour cost

Where is it Used?

• Heavy Duty Shoring

• New Bridge Construction

• Bridge Launching

• Bearing Replacement

• Façade Retention

• Propping

• Megatruss

• Travelling Slab and Tunnel Formwork

Used on Stadiums

Stadium ConstructionMegashor is frequently used in the construction of stadiums throughout the world, it is often used to support the roof or trusses.

Rectangular Stadium, Melbourne

Stadium Australia, Sydney

Adelaide Oval Redevelopment

Bridge ConstructionMegashor is frequently used to support bridge slabs or precast slab components. It also is used on existing bridges when maintenance is required.

Used on Bridges

Bogo Road Bridge, Brisbane

James St. Bridge, Perth

South Road Superway, Adelaide

Leg Configurations

Megashor LegsHaving nine leg sizes, ranging from 15 to 5,400mm, means that Megashor can be assembled into props, towers and trusses of almost any length.

Four LegSupport TowerTwin Leg TrestleSingle Prop

Megashor can be used in single or multiple leg support applications, both vertically or horizontally. It can also be configured into support trusses with varying depths and spans.

The Megashor Rocking Head is used to connect components at an angle.

Rocking Head

RMD Supper Slim Soldiers provide restraint for Megashor. They are available in ten sizes, from 90 to 3,600mm, which provides the ultimate in flexibility when planning the sizes of towers and centres of props.

Super Slim SoldiersWWL: 550 - 1000kN in compression depending upon height.Range: 410-620mm max.

Screw Jack

Bracing PlateFor spreading loads and connecting braces.

Header BeamTwo sizes of 3,800 and 5,000mm.

Two sizes: long 1520 – 1835mm,short 915 – 235mm.

Turnbuckles

Other Components

• Jack:420-610mm adjustment.Carries full 1,000kN load.

• Rocking Head:Up to 45 degree slope.

• Megatruss Node:Easy assembly to truss.

• Superslim Soldiers:Compatibility allows range extension.

Key Components

The End