Media Kit 2016 - Pump Engineer · October September 2nd, 2016 Chemical Industry Adipec (Abu Dhabi,...

www.pumpengineer.net

Media Kit 2016

2www.pumpengineer.net

Publishing Director: Andre Davanzo [email protected] Tel: +1-416-361-7030

Information/Advertising Americas:David Scharbach [email protected]: +1-647-962-7030

Contact

Publishing Company:

KCI Publishing BVJacob Damsingel 177201 AN ZutphenThe NetherlandsTel: +31-575-585-270Fax: [email protected]

KCI GmbHTiergartenstr. 64D - 47533 KleveGermanyTel: +49 2821-71145-0Fax: +49 [email protected]

KCI Shanghai Co., LTDRoom 1408, 14F, ChunShenJiang Building#400 Zhejiang Mid. Road, Shanghai, 200001PR ChinaTel: +86 21 6351 9609Fax: +86 21 6351 [email protected]

KCI Corporation36 King St E, Suite 701Toronto, ON M5C 1E5CanadaTel: +1-416-361-7030Fax: [email protected]

Editorial:Sarah [email protected]: +1-416-361-7030

Subscriptions:Tara Giggie [email protected] Tel: +1-416-361-7030

3 www.pumpengineer.net

About

About Pump Engineer:Pump Engineer magazine is geared to the needs of pump end-users worldwide, bringing the very latest technology updates, end-user and EPC interviews, technical articles, case studies, show previews, and more. The editorial content strongly focuses on end-user experiences and practical applications across industries. Pump Engineer magazine is published 6 times per year: February, April, June, August, October, and December. The magazine is supported by several online web and social media sites, including Facebook, LinkedIn, Twitter, and the Pump Engineer Website.

Volume 6, May 2014

COVER REPORT:

The global magazine for pump users and suppliers

In this issue of Pump Engineer magazine:

Chevron’s Bob Heyl delves into the subsea topic of seabed compressors: Page 14

End user interview: Pumping abrasive materials in the metals and mining industry: Page 20

Pump Selec on: Using speci c speed to determine pump selec on: 0

The case for AODD pumps in lter press systems: Page 34


Page 10

Hydro Inc.’s perspec ve on the global a ermarket

01_Cover.indd 1 23-04-2014 PM 05:51:30

Industries Served: Oil and Gas Water and Wastewater Chemicals and Petrochemicals Food and Beverage Sealing Technology Power Generation Pulp and Paper Solids and Slurries Pharmaceutical Shipbuilding Machine Building

Facts: A4 format Full-color 44 pages 6 times per year Average circulation: 6000 copies Published since 2003


About

Target Groups: Manufacturers Procurement managers Consultants End-users Suppliers Engineers Component manufacturers

Product Segments:Pump Engineer is relative to a variety of product segments. In addition to an array of pump types, the magazine also focuses on the technical aspects of pumps, including the different parts that make up a pump, pump-related products, and pump accessories.

Advertising Opportunities: Advertisements: 1/4-page to 2-page spread News Update Trade Shows Cover Story Website Multimedia Campaigns Flyers Pump Engineer TV Social Media Buyers’ Guide & Online Special Publications

24%

31%

36%9%

Geographical breakdown

Americas

Asia, India & RIM

Europe & Russia

Middle East & Africa

26%

13%11%

6%

18%

10%4% 4%

6%2%

Market breakdown/Primary markets

Petrochemical

Oil & gas onshore

Oil & Gas offshore

Pipelines & tank farms

Engineering & contrac@ng

Power genera@on

Pharmaceu@cal

Pulp & paper

Marine

Other


Editorial program 2016

Issue

February January 1st, 2016 Solids and Slurries TBA Cover story: MAGMA Inc, USA April March 3rd, 2016 Oil & Gas OTC (Houston, TX, USA) Cover story: June May 5th, 2016 Sealing Technology Global Petroleum Show (Calgary AB, Canada) Cover story: R+W Coupling Technology, USA Pump Summit Americas (Houston, TX, USA) (Houston, TX, USA) August July 1st, 2016 Water & Wastewater Turbomachinery and Pump Symposia (Houston, TX, USA) Cover story: Haskel, USA WEFTEC (Chicago, IL USA) October September 2nd, 2016 Chemical Industry Adipec (Abu Dhabi, United Arab Emirates) Cover story: Metso Flow Control, Finland December November 3rd, 2016 Power-Gen (Las Vegas, NV, USA) Cover Story: Hydro Inc, USA Pump Summit (Düsseldorf, Germany) Valve World (Düsseldorf, Germany)

(June 2016)

Stainless Steel World Americas (Houston, TX, USA)

Nidec Motor Corp, USA


Advertising formats for Pump Engineer magazine

Advert Copy Requirements

• Delivery of advertising material should be a PDF (PDF/X1a:2001), JPG (300 DPI) or EPS file.

• Full colour material should be provided in CMYK.• No text should be included within 10 mm of the right

and left sides of the crop marks.• For the double page spread advert, no text should be

included within 20 mm of the center of the advert page.

double page spread bleed 1/1 page bleed 1/1 page 1/2 page vertical bleed 1/2 page vertical W: 426 mm x H: 303 mm W: 216 mm x H: 303 mm W: 192 mm x H: 271 mm W: 111 x H 303 mm W: 90 mm x H: 271 mm

1/2 page horizontal bleed 1/2 page horizontal 1/4 page vertical W: 216 mm x H: 148 mm W: 192 mm x H: 131 mm W: 90 mm x H: 131 mm

20 mm

No text should be included within 20 mm

Please send your advertising material to Tara Giggie, [email protected] +1-416-361-7030


Rates 2016 for Pump Engineer magazine

Months of publication: February, April, June, August, October, and December.

Advertising Rates 2016 (excl. VAT)

Subscription Rates

1 year (6 issues) USD 125/EUR 962 years (12 issues) USD 199/EUR 1533 years (18 issues) USD 275/EUR 211

Insert

If you want to send a flyer or a brochure to pump clients you have the opportunity to insert a loose flyer or brochure in the Pump Engineer magazine.

Number of insertions 1x 3x 6x 8x

Full-color Price per unit Price per unit Price per unit Price per unit

2 pages spread USD 3685/EUR 2835 USD 3496/EUR 2834 USD 3324/EUR 2556 USD 3134/EUR 2410

Full page USD 2755/EUR 2119 USD 2615/EUR 2011 USD 2476/EUR 1904 USD 2336/EUR 1796

Half page USD 1686/EUR 1296 USD 1595/EUR 1226 USD 1502/EUR 1155 USD 1410/EUR 1084

Quarter page USD 982/EUR 755 USD 940/EUR 723 USD 884/EUR 680 USD 811/EUR 623

Black & white

2 pages spread USD 3266/EUR 2512 USD 3078/EUR 2367 USD 2893/EUR 2225 USD 2801/EUR 2154

Full page USD 1967/EUR 1513 USD 1869/EUR 1437 USD 1772/EUR 1363 USD 1688/EUR 1298

Half page USD 1224/EUR 941 USD 1162/EUR 893 USD 1018/EUR 783 USD 965/EUR 742

Quarter page USD 681/EUR 523 USD 586/EUR 450 USD 563/EUR 433 USD 517/EUR 397

double page spread bleed 1/1 page bleed 1/1 page 1/2 page vertical bleed 1/2 page vertical W: 426 mm x H: 303 mm W: 216 mm x H: 303 mm W: 192 mm x H: 271 mm W: 111 x H 303 mm W: 90 mm x H: 271 mm

1/2 page horizontal bleed 1/2 page horizontal 1/4 page vertical W: 216 mm x H: 148 mm W: 192 mm x H: 131 mm W: 90 mm x H: 131 mm


Cover Story Package

The Cover Story Package is a unique marketing mix of an editorial feature and an advertising campaign with enormous selling power.

Pump Engineer, May 2014 10

COVER STORY: HYDRO INC.

Hydro is a global leader in the pump aftermarket repairs, upgrades and engineering solutions.

Since 1969, engineers at Hydro Inc. have been repairing, upgrading, and replacing existing pumps and pump systems. With service centre locations across the globe, they have since grown into the largest independent pump service and pump engineering company in the world.

Sarah Schroer

Pump companies typically fall into one of two categories: the original equipment manufacturer (OEM) that design, build, and sell pumps; and

smaller, local machine repair shops. But Hydro offers the pump industry the best of both worlds. George Harris, one of the original founding engineers and current CEO, explains Hydro’s unique worldwide market position: “We have developed a unique niche where we have the engineering services, the testing capabilities, and the worldwide footprint that the large OEMs have, but we still maintain the flexibility and the cost-effectiveness of the smaller companies.”

Hydro Inc.’s perspective on the globa l

Harris also emphasizes that engineers are the heart of the company. Nick Dagres, the Vice President of Nuclear Operations in Chicago, notes that “We focus on aftermarket services and support. We implement engineering modifications to improve

the performance of pumps that are out in the field.” By offering pump rebuilding, engineering, and upgrading at each service centre, Hydro can more effectively service the special needs and requirements of customers

in each region. Staying close to the customer is one of the fundamental tenets of Hydro’s strategy and culture.

Hydro’s vision is to be the pre-eminent “a ermarket pump service

organiza on in the world.”

07_Cover Story.indd 10 23-04-2014 PM 05:41:36

www.pumpengineer.net 11


Hydro’s long list of services include welding-related repairs, such as performed on this 2 ½” Pacific RL IJ charging pump.

A thorough quality inspection is carried out by Hydro’s detailed-oriented engineers.

a l aftermarket

Hydro’s mission statement:“Our mission is to work hand-in-hand with our

valued customers to optimize the performance and reliability of their pumping systems by evaluating

and understanding root causes of pump degradation or failure and by providing unbiased engineering

analysis, quality workmanship, and responsive field service for improved plant operation.”

Worldwide reach and company strategyHarris explains, “Our plan is to continue to grow and to develop centres across the globe.” And because of Hydro’s simple corporate structure, each service centre can respond more effectively to local market needs. Ross Bertoli, the General Manager for Australia and Southeast Asia, reflects on the history of Hydro’s worldwide reach. Australia was the location of the company’s first operation outside of North America. It began when Bertoli, working for another company at the time, discovered that a large power generating company in the Australian state of Victoria was sending their pumps to a company in the U.S. for repair. After some investigation, Bertoli discovered that the company was Hydro. “I went to Chicago and met George and all the Hydro people and convinced them to set up an operation here in Australia,” explains Bertoli. In 1996, the first operation was set up in Australia and nearly 20 years later, Hydro has locations in Canada, the U.K., France, Dubai, India, Malaysia, Vietnam, and Korea, as well as nine service centres in the U.S.


Volume 6, May 2014

COVER REPORT:

The global magazine for pump users and suppliers

In this issue of Pump Engineer magazine:

Chevron’s Bob Heyl delves into the subsea topic of seabed compressors: Page 14

End user interview: Pumping abrasive materials in the metals and mining industry: Page 20

Pump Selec on: Using speci c speed to determine pump selec on: Page 30

The case for AODD pumps in lter press systems: Page 34


Page 10

Hydro Inc.’s perspec ve on the global a ermarket

01_Cover.indd 1 23-04-2014 PM 05:51:30

Comprises: Your company featured on the cover of Pump Engineer. A feature article 4 x 1/1 page A4, full-color. The article is the product of Pump Engineer and will be written after an interview with

you, in our style. We will send you the article after the text has been written so that you may check it, and once again after the illustrations have been added so that we can be assured that it completely meets your wishes.

Packages include at least 4 x 1/1 full-color advertisements. 300 copies will be made available for your own distribution amongst your clients, prospects, at exhibitions, etc. All copies will be

sent to one address free of charge. The feature article will be placed in the Cover Gallery on the Pump Engineer website (www.pumpengineer.net) for at least one year.


Cover Story Package

The Cover Story Package includes both Online and Printed Media.

Package A:• 6 full page (A4) full-color advertisements. • Feature article (4 page article)• Banner in Slide Show (Home Page online for 3 months)• Web Box on Home Page with 5 deep links for 12 months• Top Banner logo on Home Page (online for 2 weeks)• A hyperlink in Companies box on the Home Page (online for 12

months)• 4 Product Showcases in the Pump Engineer Bi-Weekly News

Update

Total cost: USD 29,900/EUR 23.000

Package B:• 4 full page (A4) full-color advertisements. • Feature article (4 page article)• Banner in Slide Show (Home Page online for 3 months)• Web Box on Home Page with 5 deep links for 12 months• Top Banner logo on Home Page (online for 2 weeks)• A hyperlink in Companies box on the Home Page (online for

12 months)• 4 Product Showcases in the Pump Engineer Bi-Weekly News

Update

Total cost: USD 21,700/EUR 16.692

Pump Engineer, May 2014 12


Tom Pendlebury, Director of Operations at Hydro Middle East in Dubai, adds that Hydro’s worldwide network adds to their success. Service centres share their knowledge, experience, and resources to provide solutions and troubleshoot complex problems. “By locating in Dubai, Hydro has effectively placed itself in the hub of the oil and gas industry. While areas such as Saudi Arabia and Iraq have larger oil reserves and production rates, Dubai has become the purchasing centre for the major oil and service companies. The key to operating in this region is locality; the industries demand that service work is carried out in close proximity to their operations as response time is critical.” The oil and gas industries, for example, have 30% of the world’s oil production within a one-hour flight of Dubai. “Many businesses start with the aim of becoming a substitute for the customer’s already established supplier base. Thanks to an experienced team of engineers, a highly-skilled workforce and access to some of the most advanced technology in repair and manufacturing available at Hydro’s worldwide locations, we have been successful in becoming the number one choice for a number of high-profile customers. Rather than trying to be a substitute, Hydro is intent on offering advanced engineering coupled with a rapid and personalized response,” says Thomas Arakal, Director of Sales and Marketing at Hydro Middle East.

A culture of continuous improvement and innovationDagres describes how an independent company like Hydro is set apart by its in-house testing lab. “What it gives us is the ability to be responsive to our customers. Not only can Hydro develop and execute pump modifications and upgrades, but now they can prove performance improvements at the Chicago test lab facility which has 5000 HP and flows up to 26000 gpm for horizontal testing, 2000 HP for the vertical machines and up to 42000 gpm, a variable frequency drive from 2300 to 4160 volts and submersible pump testing capacities of four to14 inch discharge vessel sizes. Hydro’s testing lab procedures are so thorough that OEMs have called Hydro to do their testing. “They don’t have the

The portable CMM (Coordinate Measuring Machine) has laser scanning capabilities used to perform reverse engineering.

Finite element analysis is used to optimize bolt thickness and sizing according to stress analysis data.

Hydro’s services Pump Repairs: Inspections, rotor centralization

of impeller and diffuser centerlines, and rotor balancing.

Pump Upgrades: Hydraulic design modifications, precision split rings, and metallurgy changes.

Pump Engineering: Reverse engineering, CFD, rotor dynamic, stress, and root cause analyses.

Replacement Parts: Just-in-time and cast parts. Emergency Pump Services Pump Testing Capabilities Pump Field Services

Hydro has service centres across the globe, including Dubai, U.A.E. (left), in Saint-C ha


Pump Engineer, July 2014 10

COVER STORY: TITAN FLOW CONTROL

Titan Flow Control’s philosophy on why t

Along with offering valves and strainers, Titan Flow Control’s expert engineers can design and manufacture a wide variety of fabricated, specialty pr

For a small-town valve and strainer manufacturer, Titan Flow Control Inc. has been making a big name for themselves across the industry. Read on to learn how Vice President of Sales, Nancy Gibbons, along with several industry veterans came together to form the now worldwide successful company.By Sarah Schroer, Editor, Pump Engineer

Titan Flow Control, Inc. (Titan FCI), is well known across the world as an industrial and commercial piping product manufacturer. What perhaps is less well known is how Titan FCI got their start. Nancy Gibbons, Vice President of Sales at Titan FCI, has been in the valve and strainer business for over 40 years. She started at Mueller Steam Specialty, located in the southeastern part of North Carolina, under such roles as the VP of purchasing and as a General Manager. When over 45 long-time employees were laid off after a company downsize, Gibbons, along with a bunch of industry veterans got together and they built Titan FCI from the ground up. “We decided, well, we are going to stick to what we know. We know strainers, we know valves, so me and Martin Gibbons – that's my

husband – contacted a few people we knew were also laid off and they invested their retirement money,” explains Gibbons. Everyone came together to help make Titan FCI possible.

Along with the layoffs, all the foundries and the trucking companies were also out of work. Since Gibbons and her veterans knew, and had been working with these companies for years, it was only natural to continue the relationships. Gibbons expresses how thankful she is for all the help

they’ve had along the way. “Everybody came to me and said, What do you need from me? We were given terms of six months from foundries and manufacturing plants. The truckers said they’ll hold, pay us when you can afford it. I mean, we’ve had a

“The thing that really, really diff eren� ates us “from the rest of troupe is customer

service. Our mantra is “the customer is King” and every employee knows it in this company. We are very easy to do business with.”

06_Cover Story.indd 10 6/27/2014 5:30:36 AM

www.pumpengineer.net 11

COVER STORY: TITAN FLOW CONTROL

y the customer is King

ty products.

Committed to the customerIn 2000, Titan made the following promises and stays true to them today: We will never install a computer system that

eliminates the exibility needed to provide you with the service you demand. We will never install one of those automa c phone

systems that answers your call with a bunch of numbers from which you must select, just to get another bunch of numbers from which you must select. When you call Titan, you will talk to real live human beings – every call – every me – always.

We will honestly tell you what we can do for you and what we cannot do.

If we do not have what you need we will help you nd it. We will do this even if doing so means Titan is eliminated from the sale.

We have commi ed to maintain an extensive selec on of products on hand because ours is a specialty business. We started our business carrying a substan al stock in inventory and we will con nue to maintain it.

lot of help along the way.” On April 15th, 2000, Titan FCI was formed, bringing together an accumulation of over 300 years’ worth of industry expertise. “This was 14 years ago now and we never looked back,” says Gibbons.

Today, the company has a large staff of talented and capable employees dedicated to helping their customers. There are fi ve working owners. Titan FCI also employs fi ve engineers, including manufacturing engineers and mechanical engineers. They have grown by 30 to 35 percent every year. Part of their growth includes the properties the business occupies in Lumberton, North Carolina. Within the town, Titan FCI has three different facilities, including their fabrication shop, the corporate offi ce, and their manufacturing facility. While the company started in a 5000 square foot manufacturing facility, they then went into a 10, 000 square foot manufacturing facility. Most recently, Titan FCI has added 8000 more square feet, for a total of about 85,000 square feet on 10 acres of land. The fabrication shop is 40,000 square feet on seven acres. While Lumberton is not an area not known for its industry action, Gibbons’ explanation of why they would set up shop there is a perfect encompassment of the spirit and values of Titan FCI. Gibbons says it was simple. It came down to family. Their families all lived in the area and it was important to stay there too.

Around 35% of Titan FCI’s office staff have engineering degrees – from manufacturing engineers to mechanical engineers.

Titan FCI stays on top of market trends by making sure they attend four major shows a year, including both the POWER-GEN show and also the Valve World Expo.

06_Cover Story.indd 11 6/26/2014 6:01:38 PM


Buyers’ Guide & Online Package

+The Buyers’ Guide + Online Package includes both the yellow pages in Pump Engineer magazine, plus the Online Directory. It is a reference guide of suppliers and manufacturers, classified according to various headings. Your company data can be listed under one or more headings. Two different categories are available: Basic and Premium

❏ BASIC (print + online) ❏ PREMIUM (print + online)The BASIC entry contains the following information: Contains the features in the BASIC entry plus:• Company Name • You can add 5 info lines after your company details• Address, City, Country 22 characters per line, including spaces, etc.• Phone and Fax • Email Address • Website

BONUS:The online version of the Buyers’ Guide + Online has some significant extra options, available free of charge.• 1 x company logo (JPEG-Format, minimum 250 pixels, maximum 330 pixels)• 3 x pictures (JPEG-Format, 115 x 79 pixels [width x height])• Caption (One caption per picture, no longer than 20 characters)• Text (WORD-Document, maximum of 400 words)

Basic entry: 1 year: USD 1400/EUR 10762 years: USD 2300/EUR 17693 years: USD 3200/EUR 2461

Premium entry: 1 year: USD 2200/EUR16922 years: USD 2900/EUR 22303 years: USD 2700/EUR 2076


News Update Package

Pump Engineer News Update

The Pump Engineer News Update is sent bi-weekly, 24 times per year to over 8,500subscribers. It is free to receive and each update includes new products, important industry news, and information about relevant pump-related projects.

Newsletter Logo Banner 1 year 2 yearsThe Logo Banner including link USD 6660/EUR 5350 USD 10850/EUR 8750to your homepage Format: .jpgSize: max. 125 px * 40 px

Newsletter Community Box 1 year 2 yearsYour company name is linked USD 1718/EUR 1380 USD 2914/EUR 2350to your website

Newsletter Showcase 4 weeks You can add a box with information USD 2676/EUR 2150 about your products, events, etc.Format: .gifSize: max. 175px x 175px


Pump Engineer Online

The benefits of online exposure are obvious: fast, interactive, direct worldwide access, 24 hours a day. Pump Engineer professionals connect to their target audience through a singular or multi-platform approach. From online News Updates to Web TV the benefits are: brand recognition, global exposure, buyer education and quality, targeted leads.

Visit us at www.pumpengineer.net and get connected!

Web Box 1 year 2 years USD 6660/EUR 5350 USD 10850/EUR 8750

Format: .gif (non-animated)Size: max. 110 px * 110 px

Hyperlink 1 year 2 years USD 2054/EUR 1650 USD 3596/EUR 2900

Company name and link to website

Pump Engineer Website

Highlight 1 year 2 years USD 2054/EUR 1650 USD 3596/EUR 2900 max. 175 charactersLink to website

Logo Banner on subpage 1 year 2 years USD 1240/EUR 995 USD 2170 /EUR 1750 Format: .jpgSize: max. 125 px * 40 px


Pump Engineer Website

Skyscraper Banner1 month USD 2676/EUR 2150

Format: .jpg/.gif(animation possible)Size: max. 160 px * 600 px

Slideshow Banner 3 months USD 1804/EUR 1450

Format: .jpgSize: max. 625 px * 130 px

Reveal Ad 2 weeks USD 3982/EUR 3200Format: .gifSize: max. 134 px * 88 px

Tickertape 2 weeks USD 1720/EUR 1380

max. 175 characters

Pump Engineer is the only independent information source for the Pump industry

Top Banner 2 weeksUSD 2676/EUR 2150

Format: .jpgSize: max. 325 px * 50 px

Pump Engineer is the only independent information source for the Pump industry

14

Pump Engineer TV

The demand for TV productions has risen within companies that want to optimize their marketing strategy.

Do you want to present your company in a video? Or promote an existing video on our website? We can help you find the best solution. KCI offers various options.

Web TV Commercial: 1 year 2 yearsThe one-minute video will be produced on-site and will be USD 3110/EUR 2500 N/Apublished online for a month on the main website and for 11 months in the TV Gallery

Publication in TV Gallery USD 2482/EUR 1995 USD 3726/EUR 2995

Corporate Company Movie on request



Conferences and Exhibitions

Conferences and ExhibitionsOur conferences and exhibitions offer a platform for exhibitors, visitors and conference delegates to exchange their knowledge and the latest market technologies. If you are interested in any of our events please contact: Andre Davanzo, [email protected], Tel: + 1-416-361-7030.

Pump Summit Americas 2016: June 13th – 14th 2016, Houston, USAPump Summit Americas offers a professional platform to connect our pump community members. Pump experts from across North and South America will join together to expand their industry network and to stay informed about the latest technolo-gies in the field of pumps and pump systems. www.pumpsummitamericas.com

Fugitive Emissions Summit Americas 2016: June 13th – 14th 2016, Houston, USAFugitive Emissions Summit Americas aims to bring together a community of end users, EPC’s, distributors, manufacturers, and suppliers for an exciting conference and exhibition that will help address the ever-changing world of fugitive emissions regula-tions and control. There will be a strong emphasis on LDAR programs and how all industries affected by current regulations can interpret and meet the regulations whether it be downstream or upstream. www.fugitive-emissions-summit.com

Stainless Steel World Americas Conference & Exhibition 2016:November 9th – 10th 2016, Houston, USA The ninth biennial Stainless Steel World Americas Conference & Exhibition is a must-attend event for manufacturers, fabrica-tors, suppliers and end-users of stainless steels and corrosion resistant alloys alike. Each program day of the Conference will begin with a series of plenary lectures presented by high profile end-users, EPCs and professionals in the oil & gas, chemical & petrochemical and energy sectors. The conference will be further complemented by the exhibition, where manufacturers, suppliers, fabricators and distributors from around North America and the rest of the world will showcase their latest products and establish business relationships for the years ahead. www.ssw-americas.com/ssw2016

Pump Summit Düsseldorf 2016:November 29th – 30th 2016, Düsseldorf, GermanyThe city of Düsseldorf, Germany, is set to host the second Pump Summit in 2016. Running parallel to Valve World Conference & Expo, Pump Summit 2016 will give manufacturers, distributors, and users of pumps, compressors, and seals the opportunity to present their products to an international audience as well as share their knowledge and expertise. www.pumpsummit.com

16

facebook.com/engineer.pump

twitter.com/Pump_Engr

youtube.com/user/kcipub

linkedin.com/groups/Pump-Engineer-Group-4337439

Social Media Packages

Social Media & Pump Engineer

Pump Engineer‘s social media channels connect our pump community members through one-of-a-kind platforms. End-users, engineers, suppliers, and international experts stay connected and highlight their companies to gain optimal exposure.

Social Media Package: 1 year 2 years USD 4860/EUR 3900 USD 8086/EUR 6500 3 news items per month on different social media channels

Text without logo

Editorial content only – non-commercial

Visit our groups on Facebook, Twitter, YouTube and LinkedIn


Facebook “f ” Logo CMYK / .eps Facebook “f ” Logo CMYK / .eps

Media Kit 2016 - Pump Engineer · October September 2nd, 2016 Chemical Industry Adipec (Abu Dhabi,...

Documents

Transcript of Media Kit 2016 - Pump Engineer · October September 2nd, 2016 Chemical Industry Adipec (Abu Dhabi,...