Mechatronic silva sesma

9
Marco Antonio Silva Sesma 2amt

description

codigos de mecatronica

Transcript of Mechatronic silva sesma

Page 1: Mechatronic silva sesma

Marco Antonio Silva Sesma 2amt

Page 2: Mechatronic silva sesma

Una resistencia o resistor es un elemento que causa oposición al paso de la corriente eléctrica, causando que en sus terminales aparezca una diferencia de tensión (un voltaje).

A resistor or resistor is an element that causes opposition to current electric flow , causing its terminal voltage appears a difference (a voltage).

Resistor

Page 3: Mechatronic silva sesma

Types of resistance

The most commonly used types of resistance are: -Fixed Resistors: agglomerated carbon film, wirewound and metal film. -Variable resistors: rolls of film.

-Dependent or variable resistors: LDR, VDR, PTC , NTC.

Los tipos de resistencias más utilizadas son:- Resistencias fijas: aglomeradas, de película de carbón, de película metálica ybobinadas.- Resistencias variables: bobinadas, de película.- Resistencias dependientes o variables: LDR, VDR, PTC, NTC.

Page 4: Mechatronic silva sesma

Resistor

Los resistores (resistencias)son fabricados en una gran variedad  de formas y tamaños.En las más grandes, el valor del resistor se imprime directamente en el cuerpo del mismo, pero en los más pequeños no es posible.

The resistors are manufactured in a wide

variety of shapes and sizes.

The larger the resistor value is printed directly

on the body of it, but in smaller not possible.

Page 5: Mechatronic silva sesma

Para poder obtener con facilidad el valor de la resistencia /resistor se utiliza el código de coloresSobre estos resistores se pintan unas bandas de colores. Cada color representa un número que se utiliza para obtener el valor final del resistor.

To be able to easily obtain the value of resistance

/ resistor is used, the color code.

On these resistors are painted bands of color.

Each color represents a number that is used to

obtain the final value of the resistor.

Page 6: Mechatronic silva sesma

Las dos primeras bandas indican las dos primeras cifras del valor del resistor, la tercera banda indica cuantos ceros hay que aumentarle al valor anterior para obtener el valor final de la resistor.La cuarta banda nos indica  la tolerancia y si hay quinta banda, ésta nos indica su confiabilidad.

The first two bands indicate the first two

digits of the value of the resistor, the third

band indicates how many zeros should be

increased to the previous value to obtain

the final value of the resistor.

The fourth band indicates the tolerance

and if there fifth band, this one indicates

its reliability.

Page 7: Mechatronic silva sesma

Color Primera bandaPrimer dígito

Segunda bandaSegundo dígito

Tercera bandaTercer dígito

Cuarta bandaTolerancia

Negro 0 0 1  

Marrón 1 1 10  

Rojo 2 2 100  

Naranja 3 3 1000  

Amarillo 4 4 10000  

Verde 5 5 100000  

Azul 6 6 1000000  

Violeta 7 7 10000000  

Gris 8 8 100000000  

Blanco 9 9 1000000000  

Dorado     0.1 5%

Plateado     0.01 10%

Ninguno       20%

Page 8: Mechatronic silva sesma

If a resistor has the following color bands:

The resistor has a value of 2400.000 ohms ± 5% The maximum value of this resistor is: 25200.000 Ω The minimum value of this resistor is: 22800.000 Ω resistor can have any value between the maximum and minimum calculated.

Page 9: Mechatronic silva sesma