Steel Bench Vises• Lockable swivel bases• 10 year warranty

Part no. description SPECIALKTI64105 5 inch Wide Bench Vise Opens to 7 inches

KTI64106 6 inch Wide Bench Vise Opens to 8 inches

KTI64108 8 inch Wide Bench Vise Opens to 9 inches

VISES

00035

07740

Heat Shrink Tube AssortmentsAllows protection and insulation of automotive wires, electrical and mechanical components from heat, moisture, and corrosion. Quick and simple to shrink by heat gun.

00033

00034

Part No. Description Shrink Ratio Length Diameters SPECIALKTI00033 216 Piece Set - Black/Red 2:1 45 & 75mm 2.5, 3.5, 4.5, 6, 10mm

KTI00034 105 Pc Double Wall Set - Blk/Red 3:1 45 & 75mm 3.2, 4.8, 6.4, 9.5, 12.7mm

KTI00035 85 Piece Set - Black only 2:1 6 inch 1/8”, 3/16”, 1/4”, 3/8”, 1/2”

KTI07740 235 Piece Set - Assorted colors 2:1 6 inch 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 5/8, 3/4’

Micro Butane Turbo-Lite• CPSC (Consumer Product Safety Commission) compliant• Piezo electronic ignition system• Stylish see through fuel tank• Protective flip-open cap • Reliable windproof lighter• Flame temperature: 2400 degrees

Fahrenheit (1300 degrees Celcius)• Ideal for hobbies, do-it-yourself repairs,

odd jobs, and camping

KTI70048

Hand-Held Pro Butane Torch• The original hand-held, lightweight and sturdy professional torch• Piezo ignition and safety kill/off switch• Adjustable air flow and gas flow control valves• Tank contains fuel for 190 minutes of operation at mid setting• Alloy die casting housing covered with a protective grip and sturdy removeable base for added safety

KTI70058

Mechanic’sMarketplace

TOW STRAPS & TIE DOWNS

K-Tool International recommends that the working load never exceed 1/3 of the rated capacity. Any strap assembly is only as strong as its weakest component, including the point of attachment or anchor.

Tie Downs & StrapsKTI73870 Ratcheting Tie Down (PVC-coated hooks) (each)• 900 lb. capacity • 1” width • 15’ length • 4-pack

KTI73871 Universal Tie Down (PVC-coated hooks) • 900 lb. capacity • 1” width • 10’ length • 1-pac

KTI73871

Heavy Duty Tow Straps with Loop EndsHeavy duty nylon web construction with reinforced stitching. For your safety recommended working load should not exceed 1/3 of maximum rated load.

Part No. Description Size Capacity Normally Special

KTI73813 Tow Strap w/ Loop Ends 4” Wide x 30 Feet Long 40,000 lb. max

KTI73814 Tow Strap w/ Loop Ends 6” Wide x 30 Feet Long 60,000 lb. max

KTI73813

KTI73814

TORCHES

Hand Held Butane Torch Lighter• Handy pocket butane torch• Light duty soldering such as: shrinking heat seal

tubing, craft projects, thawing frozen locks, lighting camp stoves

KTI70052

Self Igniting Propane Torch Head• Portable and lightweight • High energy flame• Angled swivel tube to reach difficult areas• For use with MAPP or propane gas.

KTI70056

Self Igniting Propane Torch Head• Piezo igniter for instant flame• Safety lock feature to prevent accidental ignition• Ignition button lock for continuous use• Replacement brass tip• For use with MAPP or propane gas.

KTI70057

Mini Butane Torch• Mini butane torch with solder head• Piezo-electric ignition with locking safety mechanism• Temperature and flame control, up to 2372 degrees

Fahrenheit jet flame• Anti-flare • Removeable safety stand

KTI70054Pyro Torch ShieldSize: 10” X 18”. Protect surfaces from sparks or open flame from gas torches. Will withstand even the extreme heat of acetylene torches.

KTI70440

60 Piece Butt Connector Kit with Shrink Fit• Includes three popular sizes for use on 10 to 22 gauge wire• Made in U.S.A

KTI00004

Pricing Good Through June 30, 2016

BluBird Oil Shield Air Hoses, Yellow• BluBird Oil Shield 300 PSI 100% rubber air hose with 1/4” NPT• Ultra lightweight, extreme durability resists abrasion and ultra high strength exceeds RMA IP-2• Stays flexible in extreme conditions from -30 to 190 degrees fahrenheit• Oil reistance core tube and cover meets RMA Class A oil resistance• Four finger grip bend resrictor for easy use and better durability• Color: Yellow• 3 year warranty

Part Number Description

KTI72017 BluBird Oil Shield 3/8” x 35’ Air Hose, Yellow

KTI72018 BluBird Oil Shield 3/8” x 50’ Air Hose, Yellow

KTI72019 BluBird Oil Shield 1/2” x 50’ Air Hose, Yellow

AvaGard Rubber Air Hoses, Red• Avagard premium 300 PSI professional rubber air hose with 1/4” NPT• Very light, super strong and super agile• Stays flexible in extreme conditions from -40 to 180 degrees fahrenheit• Oil resistant core tube meets RMA Class C oil resistance and ozone resistant cover resists extreme weather, abrasions & kinks• Ultimate durability • Color: Red• 5 year warranty

Part Number Description

KTI72020 AvaGard 3/8” x 25’ Air Hose, Red

KTI72021 AvaGard 3/8” x 50’ Air Hose, Red

KTI72022 AvaGard 1/2” x 25’ Air Hose, Red

KTI72023 AvaGard 1/2” x 50’ Air Hose, Red

Combi Wedge• Heavy duty universal combination wedge tool• Use on dashboards and door cover clips• Tool length: 8.5”, width: 1”, height: 1”• Color: Red • 1-Year Warranty

KTI70038

NEW

NEW

NEW

4-1/2” Angle Grinder • Spindle lock makes changing the grinder wheel quick and easy• Includes a grinding wheel guard, wrench and flange• Ergonomic, removable side handle• UL listed; One-year limited warranty• Specifications: 5 amp; 11,000 rpm no-load speed; 120 volt AC rating.

KTI10010

10” Random Orbit Polisher/Waxer • High-impact ABS shell for added durability• Includes one (1) terry cloth bonnet and one (1) synthetic wool bonnet• UL listed • Specifications: 0.75 amp; 3,000 rpm no load speed; 120V/60Hz rated voltage; 10-inch cord

KTI10210

7” Variable Speed Polisher/Sander• Variable speed control (maximum speeds from 1,000 to 3,000rpm)• Includes: one (1) 7” rubber polishing pad; one (1) 7” sanding pad and one (1) wool bonnet• UL listed • Specifications: 11 amp; 120 Volt AC ~ 60Hz; variable speeds: 1,000 to 3.000 rpm; soft start; overload protection and trigger loc

KTI10215

SSKTIDLR6CAN

$180.95

$224.45

$293.95

$13.45$35.95$42.45$29.95

$17.95 $72.45

$113.95$269.95

$34.45

$9.95

$12.95

$44.95

$74.95

$42.95

$19.45

$58.95$83.45

$29.95

$41.95

$111.45

$55.45

$77.45

$14.45

$74.45

$51.95

$155.45

$41.45

24 SMD LED Rechargeable Folding Underhood Worklight• 24 LED SMD worklight with 7.4 volt / 2000 mAh Li battery• 6 Hour charge time • 3.5 hour approximate run time• Aluminum and ABS housing• Telescopic ends slide to a maximum of 74.75” • Two soft rubber covered brackets allow attaching the light to work area• Hi / Low / Off operation modes • AC & DC chargers included• Full extension length: 50.375” • Folded length: 26.875”

KTI73386

2

TORQUE WRENCHES

Click-Style Torque WrenchesThese torque wrenches are extremely accurate and easy-to-use. Simply adjust the torque specification on the wrench by releasing the red knob and turning the handle of the torque wrench while holding the shaft of the torque wrench. Features a ball detent socket retainer with push-button release for quick socket changes. Work clockwise and counter-clockwise.

Accurate easy-to-use adjustment

Locking Ring ensures accuracy

Push-Button Release

Use with 1/2” Dr. Ratchets (Not included)

SAFETY FLARES

Digital Torque Adaptor 1/2” Drive• Use digital torque adaptor with 1/2” drive ratchet• Static torque measurement• Three standard functions: torque setting, measurement

setting and mode setting• Operates is clockwise and counter-clockwise directions• Torque range is 29.5 - 147.5 ft-lbs

KTI72138

Part No. Description Torque Range Over-all Length SPECIALKTI72140 3/8” Drive Click-Style Torque Wrench 50-250 in/lbs. 8-3/4”

KTI72141 1/2” Drive Click-Style Torque Wrench 30-150 ft/lbs. 18-3/4”

KTI72142 1/2” Drive Click-Style Torque Wrench 30-250 ft/lbs. 21-1/2”

Tire Inflator GaugeRange from 10 to 120 lbs. shown in 2 lb. increments, 15” air hose with 1/4” female NPT, 6” chrome-plated dual-head chuck and 3/8” - 24 thread air inlet. Weatherproof aluminum body with corrosion-resistant brass valve. Withstands everyday use and abuse. Gauge and valve cartridges are replaceable. Magnifying bubble lens. Angled tip makes it easy to inflate tires on trucks with dual wheels.

KTI89002

Digital Air Inflator• Range of 2 to 150 psi with 0.1 psi resolution• Boasts a dual head chuck and is accurate to within ±1% + 0.5psi at 100psi and ±2% + 0.5psi at 150psi• Programmed to work with various units of measurement (psi/bar/kpa/kg/cm2)• Works on TPMS equipped wheels• Features include a large face

LCD digital display, anti-oil rubber casting and ergonomic grip

KTI89001

Emergency Safety Flare • Applications in automotive, industrial, and marine• Nine flash patterns including the USCG approved SOS • For emergency situations & awareness in work areas• Runs up to 100 hours on replaceable CR-123 battery• Positive Buoancy• Shatter, crush, and water resistant

KTI79800

Rechargeable Emergency Safety Flare• Runtime up to 50 hours

depending on flash pattern• Charger adapter included

KTI79801

Digital Torque Wrenches• 72 Teeth• Comes in black blow-molded storage case

Part No. Description Torque Range Over-all Length SPECIALKTI72133 3/8” Drive Digital Torque Wrench 14.5-73.8 in/lbs. 15”

KTI72134 1/2” Drive Digital Torque Wrench 29.5-147.5 ft/lbs. 19.375”

KTI72135 1/2” Drive Digital Torque Wrench 25-250 ft/lbs. 22.250”

TORQUE ADAPTER

55 Piece Tire Repair KitEasily and quickly repair punctures in tubeless tires. Simply prepare the hole with the spiral reamer, load the plug into the insertion needles, and plug the hole. Components designed for professional use in rugged shop environments. Kit includes handy carrying case and can be used to repair tires on cars, trucks, RVs, motor homes and more. Includes: 2 Allen wrenches; 1 steel insertion needle; 1 steel spiral reamer; 1 50-pack 4” tire string plugs; 1 tub of tire plug lube; 1 blow-molded carrying case.

KTI71930

TIRE TOOLS

50’ Extra Heavy Duty Outdoor Extension Cord• Extra heavy duty extension cord features

12/3 SJTW single tap orange/black cord• LED mounted in the end of cord lights up

when cord is plugged into 110V power• Length: 50’. Watt: 1875. Amp: 15

KTI73348

Heavy Duty Outdoor Extension Cords• 14/3 SJTW single tap • Watt: 1875 • Amp: 15• LED mounted in end of cord lights up when cord is plugged

into 110V power

Part No. Description SPECIALKTI73345 25 Foot Extension Cord

KTI73346 50 Foot Extension Cord

Lighted End

30 Foot Retractable Cord Reel with 3-Outlet ConnectorExtension reel features oil and water resistant cord, retractable reel, metal housing and circuit breaker protection. 16/3 SJTW cord with indoor tri-tap. 10A/125V, 1250W.

KTI73340

48 LED Worklight • Super bright 48 element LED worklight • 25 foot 16/3 SJT power cord • 15 AMP outlet in handle • Clamped magnet attaches to center. • Two swivel hooks that fold down.

KTI73397

Rechargeable 3W COB LED• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • Charge time: 5 hours • Run-time: 2 hours • ABS and rubberized housing • Magnet on the back side and a clip for hanging • AC & DC chargers included

KTI73388

12 SMD LED Rechargeable Worklight • Rechargeable 12 SMD LED worklight. • ABS and rubberized housing• Magnet on the back side• Rotating hook on the top. • Hi / Low / Off switch.

KTI73399

Rechargeable 3W COB LED with Pivot Head• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • 5 hour charging time • 2 hour run-time • ABS and rubberized housing • Super strong magnetic base• Rotating hook at the top that can be turned down • Light head pivots 80 degrees from the base and rotates 180 degrees• AC & DC chargers included

KTI73387

50 Foot Retractable Extension Cord Reel with Tri-Tap Outdoor Plug• Features an oil and water resistant cord, retractable reel,

power indicator, lighted end and circuit breaker protection• Cord: 14/3 AWG SJTW trip-tap

KTI73341Aluminum 16 LED Flashlight• 16 LED (96 lumens) flashlight• Aerospace grade aluminum body• Rubber grip handle• Belt holster included• 3 - AAA batteries included

KTI73396

13W Fluorescent Angle Light, Reel has 30’ Retractable Cord• Retractaable SJT cable, 16/3 AWG, 30 foot cord• 9 amp, 1125 watt, 125 volt cable reel made of metal• 13 Watt bulb• On/Off switch and outlet in handle

KTI73315

50’ Incandescent Trouble Light Reel• Heavy duty metal shades have 360 rotating hanging hooks provide flexibility for all applications• Work lights feature circuit breaker protection and grounded outlet in handle• Length: 50’. Cord: 14/3 SJT. • Dual industrial cage.

KTI73335

1000 Watt Halogen Work Light with 5’ 18/3 SJTW Cord• Fixture uses two 500-watt quartz halogen bulb (included), which emit brighter, whiter light and uses less energy• Light features 5 ft. cord, 18/3 SJTW cord, on/off switch and 5 ft. tripod floor stand

KTI73375

Lighted End

EXTENSION CORDSLIGHTING

30 LED SMD Retrofit Light• Trouble Light 30 LED SMD Retrofit• Twist on module converts an incandescent trouble light into a LED • 30 high powered SMD LED (300 lumens)• A rubber bumper protects the unit • Folding hanging hook fits into the head

KTI73379

24 SMD LED Worklight• 24 SMD LED (800 lumen) • Heavy duty face plate • Foam insulated handle• On / Off switch• Multi-position ratcheting head

Cordless RechargeableCharge time: 2 hoursRun Time: 2 hours full strength

KTI73373

Corded• A/C Power with 3 foot 18/3 SJTW cord

KTI73374

Halogen Work Light 500 WattIluminate the workshop, garage or job site with the power of bright halogen light All KTI fixtures use a 500-watt quartz halogen bulb (included), which emits brighter, whiter light and uses less energy. Features include: 5-foot power cord and small floor stand• Length: 5’ • Cord: 18/3 SJTW

KTI73370

25 Foot Incandescent Trouble Lights• Metal cage guard• Use with up to a 75 Watt bulb (not included)

KTI7335825 Foot, 18/3 cord.

KTI7336025 Foot, 16/3 cord.

73312

73311

Fluorescent Angle Lights• Circuit breaker protection• On/Off switch and grounded outlet in handle • Two adjustable hanging hooks that swivel 360°• Magnetic clip for convenient under hood use• 16/3 grounded power cords

KTI73311• 25 Foot 16/3 cord• 13 Watt• Single bulb• On/Off switch

KTI73312• 25 Foot 16/3 cord• 26 Watt• (2) 13 watt bulbs• (2) independent On/Off switches

Hands Free 14 LED Headlamp • 14 LED (75 lumens) headlamp • Hi / Low / Off switch • Adjustable headband • Ratchets up/down for focus direction • Approximate 7 hour run time • 3-AAA batteries (included)

KTI73398

Slimline 6 LED Rechargeable Inspection Light• Super slim head at 1/4” thick by 11/16” wide• Up to 7 hours of light on a single charge• Generates 200 lumens at 15 feet• Micro USB receiver allows for multiple charging options• 3.7 volt Li-ion / 2200 mah rechargeable battery

KTI73389

72101

72100

Ratcheting Torque WrenchesRatcheting style, “clicks” when torque is achieved. All wrenches complete with molded storage case.

Part No. Description SPECIALKTI72117 1/4” Dr. Torque Wrench Torque Range: 30 to 150 in/lbs.

KTI72100 3/8” Dr. Torque Wrench Torque Range: 20 to 200 in/lbs.

KTI72101 1/2” Dr. Torque Wrench Torque Range: 10 to 150 ft/lbs.

KTI72102 1/2” Dr. Torque Wrench Torque Range: 25 to 250 ft/lbs.

KTI72175 3/4” Dr. Torque Wrench Torque Range: 100 to 600 in/lbs.

Exclusive Folding Option

Locking Lug Nut Remover KitRemoves locking lug nuts and locking hubcaps on most vehicles. For use with impact wrenches.

KTI71910

$65.95

$51.95

$96.45

$32.95

$48.45

$139.95$146.45$206.95

$100.45$132.45$143.95

$26.95$83.95

$30.95$53.45

$37.45 $90.95

$49.95

$57.95

$177.45

$68.95

$185.45

$119.95

$18.45

$65.95

$29.45

$104.95

$72.45

$27.95 $33.45

$21.95

$52.95 $69.45

$9.95

$59.45

$92.95

$46.45

$58.95

$92.95

$495.95$109.45

$76.95

ELECTRICAL

Heavy Duty Circuit Tester with Sealed Clamp• For use on 6, 12 and 24 volt systems• 10’ retractable wire • 4.750” probe• Sealer clamp designed to test circuit

while the power is on• Covered by a Lifetime Warranty

KTI72782

8.7” Ratcheting Terminal Crimper• Carbon steel head• Polypropylene and thermoplastic rubber handle• Tool capacity: Red 22-18 AWG,

Blue 16-14 AWG, Yellow 12-10 AWG• Adjusted by screwdriver• Lifetime Warranty

KTI56205

3 Piece Needle Nose Pliers Set• Extra long (11”) needle nose pliers • Pliers manufactured with heat treated

chrome vanadium steel for long wear• Tools feature soft comfort grip handles• Packaged in handy storage pouch• Set includes: 15 degree offset, 45 degree

bent nose and 90 degree bent nose

KTI51103

3

72780

Professional Crimping Tools• Crimps non-insulated terminals• Easy to grip handles

Metric Bubble I.S.O. Flaring Tool KitWill create the I.S.O. flare on brake lines without removing the brake line from the vehicle. Includes yoke assembly, flaring bar, gauge, wrench and 4 adapters: 4.75mm (3/16”), 6mm, 8mm and 10mm.

KTI70085

Part No. Description SPECIALKTI56203 Crimping Tool 0.5/1.5/2.5/4.0/6.0 MM2

KTI56204 Crimping & Wire Stripper 1.5/2.5/6.0/10/16 MM

Professional Multi Purpose Crimper and Wire Stripper• Wire cutter, bolt cutter, and wire stripper in one• Crimps open barrel terminals

KTI56201 - 9” KTI56202 - 8.5”

6/12 Volt Circuit TesterExtra Long 48” Lead, Clear Handle.

KTI72770

Self Adjusting Wire StripperAutomatic wire stripper, wire cutter and crimping tool for solderless terminals.

KTI56208

9.75” Professional 8-in-1 Quick and Easy Wire Stripper• Wire cutter, bolt cutter, wire stripper, and bending wire• Crimps insulated, non-insulated, and pin terminals

KTI56207

2209522092

23092

23095

Pro Series RatchetsHigh polish chrome finish, knurled handle and push button release. Thumb lever directional switch. Fine tooth ratchet mechanism.

22093

PRO-SERIES RATCHETS

15 Piece Assorted Punch and Chisel Set5 pin punches, 5 starter punches, 3 cold chisels and 2 center punches in plastic tray.

Screwdriver Sets• Made of Chrome Vanadium steel

Part No. Description SPECIALKTI11008 8 Piece Screwdriver Set Sizes: 4 Slotted (5/16” x 6”, 3/16” x 4”,1/8” x 3”, 1/4” x 1-1/2”), 4 Phillips (#2x6”, #1x4”, #0x3”, #2x1-1/2”)

KTI11018 18 Piece Screwdriver Set Sizes: 4 Slotted, 4 Phillips, 10 Precision, 2 Slotted and 2 Phillips

KTI11035 34 Piece Screwdriver Set Sizes: 7 Phillips, 8 Slotted, 4 Torx, 2 Square, Bits Driver, 12 Bits and 4 Phillips

11018

11008

Part No. Description Over-all Length SPECIALKTI22092 3/8” Drive Pro Ratchet 7-3/4” Long

KTI22093 3/8” Dr. Swivel Head Ratchet, 180° Flex Head, Locks in 5 positions. 10-1/2” Long

KTI22095 3/8” Drive Pro Ratchet - Long Handle 11-3/4” Long

KTI23092 1/2” Drive Pro Ratchet 9-7/8” Long

KTI23095 1/2” Drive Pro Ratchet - Long Handle 15” Long

8 Piece Screwdriver SetsAssortment of 3 Phillips and 5 slotted blades. 5 Screwdrivers feature hex bolsters for wrench assist.

KTI19000 Black Handles KTI19700 Orange HandlesKTI19800 Red HandlesKTI19900 Green Handles

4 Piece Roll-End Pry Bar SetOne each: 6”, 12”, 16” and 20” pry bars.

KTI71600

Auto Loading Folding Utility Knife• Folded length is 4.3125 inches• Open length 6 inches

KTI73102

5 Piece Chisel Set3/8”, 1/2”, 5/8”, 3/4” and 7/8” cold chisels.

KTI73000

6 Piece Pin Punch SetIncludes sizes: 3/32”, 1/8”, 5/32”, 3/16”, 1/4” and 5/16”.

KTI72900

Part No. SPECIALKTI72901 • Packaged in a plastic tray

KTI72901K • with kit bag organizer

Sanding PenOver 20,000 glass fibers in a pen point reach where normal sand paper cannot. Includes one extra sanding point in rear cap. U.S.-made.

KTI70550KTI70551 - 2-pack refill for sanding pen

Ratcheting Hose and Pipe Cutter• Materials up to 1-1/2” in diameter• The ratcheting action makes cutting smooth and easy • A one-touch, quick release lever opens pliers instantly• Built-in clasp securely locks handles when not in use for added safety• Lifetime warranty

KTI72355

Folding Knife Stainless Steel, Black Finish Blade, Partially Serrated With Assist Opening• Stainless steel blade partially serrated with assist opening• Folded knife length: 4.750”, width: 1.438”, height: .563”;

blade shaft length: 3.6875”, open knife length: 8.4375”• G10 handle • Reversible pocket clip

KTI73150

Folding Knife Stainless Steel Satin Finish Blade• Stainless steel blade partially serrated with assist opening• Folded knife length: 4.750”, width: 1.438, height: .563; blade

shaft length: 3.6875”, open knife length: 8.4375”• G10 handle • Reversible pocket clip

KTI73155

WRENCHES

Professional Series Combination Wrench SetsHigh polish smooth surface. Longer than standard combination wrenches. Heat treated. Available in fractional and metric sizes. New larger sets do not have kit bag organizers

Raised Panel Combination Wrench SetsRaised panel design. High polished chrome plated protects and prevents corrosion. Heat treated. All sets include kit bag organizers. 12 point box end. Available in fractional and metric sizes.

Part No. Description Sizes SPECIALKTI41300 9 Pc. Fractional Pro Series Set with Kit Bag 3/8” to 7/8”

KTI41800 13 Pc. METRIC Pro Series Set with Kit Bag 7 to 19mm

KTI41801 9 Pc. METRIC Pro Series Set, No Kit Bag 20 to 28mm

Part No. Description Sizes SPECIALKTI41011 11 Piece Fractional Raised Panel Wrench Set 3/8” to 1”

KTI41013 13 Piece Fractional Raised Panel Wrench Set 1/4” to 1”

KTI41014 14 Piece Fractional Raised Panel Wrench Set 3/8” to 1-1/4”

KTI41016 16 Piece Fractional Raised Panel Wrench Set 1/4” to 1-1/4”

KTI41513 13 Piece METRIC Raised Panel Wrench Set 7mm to 19mm

KTI41006 6 Piece Fractional Raised Panel Wrench Set 1-3/8” to 2”

Jumbo Size, Designed for Heavy Duty Trucks and Commercial Equipment

Tubing BenderBend copper, steel or aluminum tubing without collapsing or kinking. Bends 3/16”, 1/4”, 5/16” & 3/8”.

KTI72320

Professional Double Flaring Tool KitProvides safer flare for brake and fuel lines. Center screw is made of high grade alloy steel and swivel is heat treated, precision ground and plated to reduce friction. Includes 5 adapters (3/16”, 1/4”, 5/16”, 3/8” and 1/2”) each stamped with the size for easy identification. Made in USA.

KTI70080

Miniature Tubing CutterCuts 1/8” to 5/8” OD tubing. Compact size for use in confined areas. Features rollers to ease operation.

KTI72310

Heavy Duty Tubing CutterCuts 1/8” to 1-1/8” OD tubing.

KTI72330

Heavy Duty Tubing BenderBends 1/4”, 5/16” and 3/8” OD aluminum, steel and copper tubing.

KTI72340

Heavy Duty Tubing Bender PlierBends 3/16”, 1/4”, 5/16” and 3/8” diameter copper and steel tubing without collapsing or kinking.

KTI72345

Professional Brake Flaring Tool KitThis brake flaring tool will pay for itself with the first project, and it’ll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. Mounts in your vise to help you easily form 45° double, single and bubble flares in OE steel, stainless steel, and soft metal tubing. Use with 3/16”, 1/4”, 5/16” and 3/8” diameter lines...which means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel lines. Turret-style design allows you to make those precision flares in minimal time. Brake flaring forming dies are mounted right on the turret, so there’s no fumbling for small parts or missing dies. T-handle screw clamp holds line in place while forming.

KTI70081

Create Double, Single and Bubble flares in seconds

Hydraulic Flaring Tool Kit• Create precision 45 degree double,

single and bubble flares in seconds• Brake flaring tool works with stainless

steel, steel, and soft metal tubing• Use for brake lines, transmission cooler lines, and fuel lines• Kit contains: brake flare forming tool, 3/16” and 1/4” tube retaining

dies, adapters, handle, user manual, and storage/carrying case

KTI70082

Riveter Super Duty Hand 17” Long• Includes 5 nosepieces, 1/8”, 5/32”, 3/16”, 7/32” and 1/4”• 17” Long handles provide the leverage needed

to effortlessly secure rivets

KTI79110

12 Piece Universal Snap Ring Plier Kit • Versatile, heavy duty pliers are designed for the removal and

installation of either internal or external snap rings on a wide range of applications

• Includes the four most popular sizes in straight, 45 and 90 degree angle configurations

KTI55112

CLIP LIFTER

Clip Lifter• Tool length: 7” • Tool width: 3/4”• Red rubber handle • Covered by a 1-Year Warranty

KTI70037

HAND TOOLS

KNIVES CHISELS & PUNCHES

TUBING TOOLS

Heavy Duty Circuit Tester• For all 6 or 12 volt systems. • 5 Foot Heavy gauge flexible wire with ground clip and spring strain relief. • Clear handle, lights up - test result.

KTI72780

$12.45

$37.45

$41.95

$24.45

$7.45

$16.45

$24.45

$52.95

$76.45

$33.95

$66.95

$29.95

$52.45$67.45$59.95$65.95$72.45

$54.95

$10.95

$34.45

$26.45

$57.95

$57.95

$20.95

$23.45

$45.45Your Choice $31.45

$27.45

$37.95

$8.95

$5.95

$27.45

$72.45$87.95$133.95

$61.95$76.45$105.95$123.95$55.45$231.95

$23.45

$58.95

$9.45

$15.45

$41.95

$32.45

$327.95

$239.95$85.95

$253.45

$24.45

BIT SETS

ORGANIZERS

4

Mini Die Grinder25,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.

KTI87125

Die Grinder22,000 rpm. 1/4” Collet. 1/2 HP motor, built-in power regulator, variable speed throttle. 5-1/2” over-all length.

KTI87132

Gearless Angle Die Grinder25,000 Rpms. 1/4” collet excepts 1/8”, 1/4”, 3mm and 6mm shanks. Lightweight housing reduces vibration.Overall length: 6-1/4 inches.

KTI87128

Mini Angle Die Grinder18,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.

KTI87126

22801

22870

21500

22601

SOCKET SETS

FLUID PUMPS

Lever Type Barrel Pump• Telescopic suction tube for pumping contents from 15 to 55 gallon drums. • Includes brass piston ring. • Pumps agricultural and industrial chemicals, and other non-corrosive liquids. • Cushioned vinyl grip handle. • Removable threaded spout. • Dispenses approximately 300cc of liquid per stroke.

KTI72205

Hand Rotary Barrel PumpHeavy Duty capacity. Cast iron head with steel inlet/outlet tubing. 2 inch bung adapter. Ideal for heavy oil, machine oil and non-corrosive liquids. Pumps one gallon per 14 revolutions.

KTI72200

Siphon PumpMulti-use pump transfers most liquids. Also pumps air for inflatables. Use for changing oil, siphoning gas, inflating sports balls and beach toys. Includes two 51” siphon hoses, 35” dipstick hose and adapter (for changing oil) and 17” air pressure hose.Warranty information: 90-day warranty.

KTI72250

2 Piece Filter Regulator & Lubricator• Miniature Filter regulator and lubricator

2 piece space saving combination• 40 micron sintered bronze filter element,

polycarbonate bowl with metal bowl guard• 1/4” NPT, maxium flow 18 CFM (500 LPM)• Semi automatic night time drain• Pressure range: 7-145 PSI• 1-Year Warranty

KTI89195

Socket Only SetsAvailable in fractional and metric sizes short and deep lengths. 6 and 12 point sockets.

Part No. Description Pieces Drive SPECIALKTI21500 Tamperproof Torx® Set. MADE IN USA. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T50, T55 plus 2 bit holders

KTI22601 Torx® Bit Set. MADE IN USA. 12 Piece 1/4”, 3/8”, 1/2” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55 1/2” Drive: T60

KTI22870 External Torq Socket Set. 10 Piece 1/4”, 3/8” Drive 1/4” Drive: E4, E5, E6, E7, E8. 3/8” Drive: E10, E12, E14, E16, E18

KTI22801 Torq Socket Set. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55, T60

KTI22671 External Scoket Set . MADE IN USA. 10 Piece 1/4”, 3/8” Drive

1/4” drive: E-5, E-6, E7 and E8; 3/8” drive: E-10, E-12, E-14, E-16, E-18, E-20.

Part No. Description Pieces Points Sizes SPECIALKTI26100 1/4” Drive Metric Socket Set 8 Piece 6 Point 6mm to 13mm

KTI26200 1/4” Drive Metric DEEP Socket Set 8 Piece 6 Point 6mm to 13mm

KTI27401 3/8” Drive Metric DEEP Socket Set 15 Piece 12 Point 7mm to 21mm

KTI27501 3/8” Drive Metric Socket Set 15 Piece 12 Point 7mm to 21mm

KTI22100 3/8” Drive Fractional Socket Set, 10 Piece 6 Point 5/16” to 7/8”

KTI22201 3/8” Drive Fractional DEEP Socket Set, 9 Piece 6 Point 3/8” to 7/8”

KTI27101 3/8” Drive Metric Socket Set, 13 Piece 6 Point 7mm to 19mm

KTI27201 3/8” Drive Metric DEEP Socket Set, 9 Piece 6 Point 10mm to 18mm

KTI22401 3/8” Drive Fractional DEEP Socket Set 13 Piece 12 Point 1/4” to 1”

KTI22501 3/8” Drive Fractional Sort Socket Set 13 Piece 12 Point 1/4” to 1”

KTI23110 1/2” Drive Fractional Shallow Socket Set, 13 Piece 6 Point 7/16” to 1-1/4”

KTI23200 1/2” Drive Fractional DEEP Socket Set, 8 Piece 6 Point 1/2” to 15/16”

KTI28100 1/2” Drive Metric Shallow Socket Set, 14 Piece 6 Point 15mm to 28mm

KTI28200 1/2” Drive Metric DEEP Socket Set, 10 Piece 6 Point 15mm to 24mm

Battery Testers• Extremely handy and portable

way to load test suspected low charging batteries

• 10-second test cycle• Extra heavy nickel-plated

ventilated case, heavy duty cable, copper-plated clamps, and load safety switch to prevent arcing

500 Amp Carbon Pile Load Tester• 500 AMP adjustable load carbon pile • Tests 12 volt batteries rated to 1000 CCA or 160 AMP hour• 500 AMP side terminal clamps, heavy-duty stranded copper cables• Can also test alternators, regulators and starters• 15 second test with audible tone

KTI70210

125 Amp Digital Battery Tester • 125 Amp Loading Capacity• For 12 Volt batteries

KTI70216

100 Amp Battery Tester• Test 6 and 12 volt DC batteries. • 100 AMP load capacity• 0-16 volt analog display meter

with zero adjust

KTI70215

SOCKET ONLY SETS

FILTER PLIERS

Oil Filter Wrench Toyota/Lexus• Fits Toyota, Lexus, Scion, Honda and Nissan filters• Aluminum oil filter wrench• 64.5mm diameter with 14 flutes• Use with 3/8” square drive

KTI73630

Adjustable Oil Filter PliersFor removing spin-on filters with diameters from 2-1/4” to 6”. Self adjusting spring action. Made in USA.

KTI73620

Truck Filter PliersCapable of removing all agricultural and construction equipment and automotive canister type filters. Ideal for loosening over-tightened or seized filters. 17” extended reach increases leverage. Spring loaded pliers work on auto filters as well as Cummins diesel filters. Range: 4” to 7” diameter.

KTI73621

17 Piece Master Oil Filter Wrench Set• 3/8” drive cap oil filter wrenches• Fits 95% of domestic and import automotive applications• Complete set comes in a handy 10” x 13” plastic case• Includes: 80mm 15 flutes, 82mm 15 flutes, 86mm 14 flutes,

65/67mm 14 flutes, 68mm 14 flutes, 73/74mm 14 flutes, 64/65mm 14 flutes, 74/76mm 15 flutes, 76mm 14 flutes, 93mm 15 flutes, 76mm 30 flutes, 86mm 16 flutes, 88.4mm 15 flutes, 93mm 36 flutes, 93mm 45 flutes, 96mm 18 flutes, 100mm 15 flutes.

KTI73635

FILTER WRENCHES

22671

Part No. Description Pieces Points Metric Sizes Fractional Sizes Extension SPECIALKTI21044 1/4” Drive Fractional & Metric Socket Set (Standard & Deep) 44 Piece 6 Point 6mm to 13mm 3/16” to 9/16 2” & 6”

KTI26000 1/4” Drive Metric Socket Set (Standard & Deep) 21 Piece 6 Point 4mm to 11mm - 2”, 4” Universal Joint & Spinner

KTI21000 1/4” Drive Fractional Socket Set (Standard & Deep) 21 Piece 6 Point - 3/16” to 1/2” 2”, 4” Universal Joint & Spinner

KTI22047 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 6 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”

KTI22547 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 12 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”

KTI27000 3/8” Drive Metric Socket Set (Short & Deep) 26 Piece 6 Point 8mm to 21mm - 3” & 5/8” Spark Plug

KTI22000 3/8” Drive Fractional Socket Set (Short & Deep) 20 Piece 6 Point - 3/8” to 7/8” 2” & 3”

KTI24121 3/4” Drive Fractional Socket Set (Standard) 20 Piece 6 point - 3/4” to 2” 4”, 8” & T-Handle Driver

KTI23000 1/2” Drive Fractional Socket Set (Short) 16 Piece 6 Point - 7/16” - 1-1/4” 5” & 17” Breaker Bar

KTI21000KTI23000

KTI22000

Booster Cables • Booster cables have a tangle-free design• Flexible to -40 degree Fahrenheit temperatures• Vinyl coated clamps help prevent rust and corrosion• For side and top battery post

KTI74500

KTI74521

KTI74510

KTI74530

Part No. Description Wire Clamps SPECIALKTI74500 12 ft Light Duty 10 Gauge 250 Amp

KTI74505 12 ft Medium Duty 8 Gauge 400 Amp

KTI74510 16 ft Heavy Duty 6 Gauge 400 Amp

KTI74521 16 ft Extra Heavy Duty 4 Gauge 400 Amp

KTI74523 20 ft Extra Heavy Duty 4 Gauge 500 Amp

KTI74524 20 ft Extra Heavy Duty 4 Gauge 400 Amp

KTI74530 25 ft Professional 2 Gauge 500 Amp

KTI74505

BATTERY SERVICESocket Holders• 1/4”, 3/8” and 1/2” drive socket trays• Impact resistant ABS plastic• Available in grey or red • Sold in sets or individually

Part No. Description SPECIALKTI72470 3 Piece SAE, Red

KTI72471 1/4” Drive SAE, Red

KTI72472 3/8” Drive SAE, Red

KTI72473 1/2” Drive SAE, Red

KTI72475 3 Piece Metric, Gray

KTI72476 1/4” Drive Metric, Gray

KTI72477 3/8” Drive Metric, Gray

KTI72478 1/2” Drive Metric, Gray

Air Hydraulic Rivet Gun 3/16• Rugged tool sets rivets up to 3/16” OD• Includes 4 standard-size nose pieces: 3/32”, 1/8”, 5/32” and 3/16”• Air relief prevents overloading and increase life• Side air inlet• Specifications: 75-80 recommended psi; 3/16” capacity; 4.5 CFM average air consumption

KTI89110

Air Hydraulic Rivet Gun 1/4• Rugged tool sets rivets up to 1/4”” OD• Includes 6 standard-size nose pieces: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”• Includes complete head assembly (jaws and pusher) for 3/32” through 3/16” steel rivets• Specifications: 75-80 recommended psi; 1/4”” capacity; 4.5” lbs.; 4.5 CFM average air consumption

KTI89115

AIR TOOLSTEST & BLEEDAutomotive Tester and Bleed Kit• Handy for troubleshooting and tune-ups• Dial gauge indicates pressure in inches and centimeters of mercury • Perform hundreds of automotive diagnostic tests including on fuel petcocks, carburetors & vacuum advance • One person brake bleeding kit: bleeds brakes, clutches or other hydraulic systems• Bleeding kit includes fittings, hose

and 114 page instruction manual

KTI72261$65.95

$41.45

$42.45

$30.95

$26.45

$37.45

$15.95$22.45$48.45$32.45$22.95$30.95$27.95$32.45$45.95$31.95$75.95$47.45$62.95$72.45

$115.45

$95.45

$65.95

$24.45

$39.95

$61.95

$51.45

$51.95$96.45

$101.95

$91.45

$96.45$62.45$56.45$136.45$136.45$78.95$67.95$304.45$97.95

$15.95$24.95$36.45$51.45$73.45$59.45$105.45

$57.45

$100.45

$21.95

$134.95

$303.45

$106.95

$35.45$10.95$10.95$12.95$35.45$10.95$10.95$12.95

BALL JOINT & TIE ROD TOOLS AIR HOSE

WATER HOSE

Ball Joint Service Tool and Master Adapter Set• For removing and replacing ball joints• Remove and replace universal joints by using the C-Frame press• Includes one live center forcing screw, receiver tubes, and removing/

installing adapters• Works on most Ford, GM, and Dodge 2 and 4 wheel drive pickups,

vans and sport utility vehicles through 1997

KTI71556

Impact Socket Sets• Chrome Moly Steel construction• Thin wall impact quality sockets• Ideal for rugged, professional, environments• Laser engraved for quick identification• Heat treated 6 Point impact sockets• Blow molded cases, except KTI34200 and KTI34201 are shipped loose

38202

Big Pack Abrasive Cut-Off Discs

70013

33101

Rubber Air HoseSolid brass end MNPT fittings. Protective PVC bend restrictor ends. Abrasion-resistant rubber outer jacket. 300 PSI working pressure.

CUT-OFF DISCS BUDD WHEEL

Remove nut & stud with one socket

71303

Abrasive Cut-Off Discs25,000 Rpm maximum speed. Cut mufflers, light metals, fiberglass & more. 3 inch diameter discs with 3/8 inch hole for arbor.

IMPACT SOCKET SETS

5

00081

00082

0008000071

00072

00077

00097

Part No. Description Pieces Drive Sizes SPECIALKTI32100 Fractional Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”

KTI32200 Fractional DEEP Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”

KTI37100 Metric Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm

KTI37200 Metric DEEP Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm

KTI33100 Fractional Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”

KTI33101 Fractional Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”

KTI33200 Fractional DEEP Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”

KTI33202 Fractional DEEP Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”

KTI38100 Metric Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm

KTI38101 Metric Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm

KTI38200 Metric DEEP Impact Socket Set 12 Piece 1/2” Drive 10mm to 21mm

KTI38201 Metric DEEP Impact Socket Set 9 Piece 1/2” Drive 22mm to 30mm

KTI38202 Metric DEEP Impact Socket Set 26 Piece 1/2” Drive 10mm to 36mm

KTI34100 Fractional Impact Socket Set, 8 Piece 3/4” Drive 1” to 1-1/2”

KTI34200 Fractional DEEP Impact Set, no case 8 Piece 3/4” Drive 1” to 1-1/2”

Part No. Description SPECIALKTI71301 25 Pack Cut-Off Discs 3” x 1/16” x 3/8”

KTI71300 50 Pack Cut-Off Discs 3” x 1/16” x 3/8”

Part No. Description SPECIALKTI71303 6 Pack Cut-Off Discs 3” x 1/32” x 3/8”

KTI71306 6 Pack Cut-Off Discs 3” x 1/16” x 3/8”

KTI70013 Drill Arbor for Cut-Off Discs

5 Piece 1” Drive Budd Wheel Service KitUse with 1” drive impact. Set includes 33mm Hex, 35mm Hex x 17mm Square Deep, 38mm Hex x 20mm Square Deep, 41mm Hex x 21mm Square Deep and 1-1/2” Hex x 3/4” Square Deep Budd Wheel Sockets.

KTI35005

3 Foot Rubber Whip Hose3/8” ID rubber hose with 1/4” NPT male brass fittings. 300 PSI. Color: RED.

KTI72000

Swivel End Whip Hoses3/8” ID rubber hose with 1/4” MNPT brass swivel on one end and 1/4” NPT male brass fitting on the other. 300 PSI. Color: RED. Available in 3 and 6 foot lengths.

KTI72007 3 Foot

KTI72008 6 Foot

7 Piece 1/2” Drive Thin Wall Protective Socket Set• Sockets made of chrome moly steel• Complete set comes in a handy plastic case• Includes: 17mm blue , 19mm gold , 21mm red , 13/16” purple,

7/8” green , 1” titanium color, and 1-1/16” black

KTI33300

Part No. Description Size Fittings SPECIALKTI72001 Rubber Air Hose - Red 3/8” x 25 Foot 1/4” MNPT

KTI72002 Rubber Air Hose - Red 3/8” x 50 Foot 1/4” MNPT

KTI72003 Rubber Air Hose - Red 1/2” x 25 Foot 3/8” MNPT

KTI72004 Rubber Air Hose - Red 1/2” x 50 Foot 3/8” MNPT

KTI72005 Rubber Air Hose - Red 1/2” x 25 Foot 1/2” MNPT

KTI72006 Rubber Air Hose - Red 1/2” x 50 Foot 1/2” MNPT

KTI72010 Rubber Air Hose - Yellow 3/8” x 25 Foot 1/4” MNPT

KTI72011 Rubber Air Hose - Yellow 3/8” x 35 Foot 1/4” MNPT

KTI72012 Rubber Air Hose - Yellow 3/8” x 50 Foot 1/4” MNPT

00074

00089

00086

KTI Service KitsThese are assortments of consumable items that must be purchased by complete kits. The items inside these service kits are NOT available individually. Kits are NOT refillable.

SERVICE KITS

Part No. Description SPECIALKTI00071 150 Piece Hitch Pin Assortment Six different sizes 1-3/16” to 2-15/16” Long

KTI00072 300 “E” Clip Assortment 9 sizes from 1/16” to 7/8”

KTI00075 555 Cotter Pin Assortment Small Pins from 1/16” x 1” to 5/32” x 2-1/2”

KTI00077 300 Snap Ring Assortment Wide assortment of 18 different sizes.

KTI00078 144 Cotter Pin Assortment Large Pins from 1/8” x 2” to 5/16” x 2-1/2”

KTI00080 120 Pc. Auto Fuse Assortment Color coded fuses from 5Amp to 30Amp

KTI00081 120 Pc. Mini Auto Fuse Assortment Color coded fuses from 2Amp to 30Amp

KTI00082 56 Pc. Maxi Auto Fuse Assortment Color coded fuses from 20Amp to 100Amp

KTI00084 170 Pc. U-Clip & Screw Assortment Nine popular products in a variety of sizes

KTI00085 200 Pc. Hex Head Washer Drill Assortment 8 popular sizes, ranging from #8 to #10

KTI00086 270 Pc. HNBR O-Ring Assortment 17 sizes High Temperature Green (for A/C)

KTI00089 110 Pc. Copper Washer Assortment 6 sizes from 1/4” to 5/8”

KTI00091 125 Pc. Grommet Assortment 18 different sizes

KTI00093 120 Pc. Roll Pin Assortment 30 different sizes

KTI00094 407 Pc. Universal O-Ring Assortment Sizes: 1/8” to 2” ID and 1/4” to 2-1/4” OD

KTI00095 419 Pc. Universal O-Ring Assortment Sizes: 3mm to 50mm ID

KTI00096 110 Pc. Metric Grease Fitting Asst. 6mm and 10mm fittings, straight, 45° and 90°

KTI00074 110 Pc. Fractional Grease Fitting Asst. 1/4-28 &1/8-27 fittings, straight, 45° and 90°

KTI00097 157 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA

KTI00087 360 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA

KTI72013 - 1/4” x 50’- 1/4” NPT

KTI72014 - 3/8” x 25’ - 1/4” NPT

KTI72015 - 3/8” x 50’ - 1/4” NPTKTI72016 - 1/2” x 50’- 1/2” NPT

BluBird Rubber Air Hoses• 100% rubber air hose• Heavy duty, ultra light weight and super strong• 300 PSI, NPT fittings with brass ferrules and a bend restrictor• Stays flexible in temperatures from -50 degree to 180 degree Fahrenheit• Ozone and abrasion resistant EPDM blended cover

BluBird Air Hose Reels• 300 PSI retractable rubber air hose reel with lead in hose and 1/4” NPT fittings• Smooth auto-rewind with locking 12 point ratchet gearing system• Heavy duty steel construction with powder coated, corrosion proof finish• Horizontal and vertical wall mount options with adjustable guide arm• 2-Year Warranty on hose reel and 10-Year Warranty on attached

hose to any manufacturing defects

KTI71001 - 3/8” x 50’KTI71002 - 1/2” x 50’

KTI72080 - 5/8” x 50’

KTI72081 - 5/8” x 100’

KTI72082 - 3/4” x 50’

The BlueHose Water Hoses• 500 PSI rubber water hose with 3/4” GHT couplings• Oil resistance core tube meets RMA Class C oil resistance and four finger grip bend

restrictor for easy use and better durability

SPECIAL

SPECIAL

SPECIAL

SPECIAL

10 YEAR WARRANTY

10 YEAR WARRANTY

Accurately torque wheel lugs to manufacturers recommendations

Use with 1/2” Dr. Impact Sockets (Not included)

10 Piece O.E. Torque Limiting Socket SetCovers a completely different list of vehicles from Accutorq’s original 10 piece kit. Includes Orange, Light Blue, Off-White, Mud, Light Tan, Light Yellow, Red-Orange, Quartz Gray, Charcoal, and Light Purple plus case, application chart and instruction sheet. ISO 9001 Certified.

ACC10-0323

10 Piece Original Torque Limiting Socket SetCovers most cars and light trucks. Includes all Green, Red, Yellow, Blue, Gray, Light Brown, Brown, White, Turquoise, and Light Green, plus case, application chart and instruction sheet. ISO 9001 Certified. Lifetime guarantee.

ACC10-0322

7 Piece Torque Extension Set• 1/2” Drive torque extension set • Set includes: 55 ft/lb red color, 65 ft/lb yellow color, 80ft/lb green color, 100 ft/lb light blue color, 120 ft/lb white color, 140 ft/lb black color, 175ft/lb orange color.

KTI33350

TORQUE LIMITING SOCKETS

4 Piece Heavy Duty Truck Torque Limiting SetsFor large trucks and heavy equipment. Includes Red (1-1/4” x 250 ft/lbs), Brown (33mm x 475 ft/lbs), Black (1-1/2” x 475 ft/lbs), and Yellow (13/16” square x 475 ft/lbs). Available in 3/4” and 1” Drive.

ACC20-4100 3/4” Drive

ACC20-4000 1” Drive

Hose Reel 3/8” x 50 Foot• All steel contruction • Slotted mounting base - easy install • Spring powered auto recoil • 8 position ratchet system• 50 foot red rubber air hose 3/8” I.D. • PVC bend restrictor• Solid brass ferrule, 1/4” male NPT • 300 PSI

KTI71000 Reinforced side plates are powder coated to resist corrosion

$250.95

$10.45$10.45$8.95$7.95$11.95$14.45$18.45$76.45$10.45$8.45$25.95$16.95$10.45$10.45$15.45$15.95$22.45$21.45$14.45$34.95

$161.95

$8.95 $16.95

$20.45

$85.45

$30.45$63.45$30.95$47.45$65.45$132.45$108.95$210.45$54.95$146.45$85.95$86.95$249.95$116.95$166.45

$48.95

$95.95

$11.95

$11.95

$7.95

$28.95$51.95$41.45$75.45$42.95$76.95$32.45$43.95$56.95

$37.95$30.95$57.45$65.95

$68.45$125.95$96.45

$217.95$233.95

$519.95 $519.95

$134.95

$777.45$777.45

$212.45

XD Bottle Jacks• Ram extension screw adjusts low height to get full use of ram travel• Load-limiting and bypass valves prevent against over loading and over extension• Ductile iron hydraulic base for added strength• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

Part No. Description SPECIALKTI63213 12 Ton XD Bottle Jacks Lifting Range: 8.46” to 15.75”

KTI63221 20 Ton XD Bottle Jacks Lifting Range: 9.6” to 16.65”

KTI63214 12 Ton SHORT XD Bottle Jacks Lifting Range: 7.48” to 13.78”

KTI63224 20 Ton SHORT XD Bottle Jacks Lifting Range: 7.25” to 11.75”

Ratcheting Action

3 Ton Compact Service Jack• Capacity: 3 Tons • Lifting range: 5.3” - 18.5 “• Sealed hydraulic power unit• Load-limiting and bypass valves prevent use

beyond rated capacity & over extension of ram• Complies With ASME PALD/2009 Safety Standards• 1 Year warranty on material and workmanship

KTI63131

1.5 Ton Scissor Jack• Lifting range from 4.1” to 15.2”• Large base for added stability• Long crank handle for ease of turning under load• All steel construction in a compact design for storage• 1 Year Warranty on material and workmanship

KTI63100

• 45.25” long pump handle for easy pumping under load• Dual pump piston power unit• Load-limiting and bypass valves to prevent use beyond rated

capacity and over-extension of ram• Complies With ASME PALD/2009

Safety Standards• 2 Year warranty on material

and workmanship

2 Ton Extra Long Low Profile Service Jack• 2 ton capacity extra long low profile service jack for easy access

under low ground clearance vehicles• Lift range from 2.75” to 24”• Raises saddle to maximum height in 8 full pump strokes - no load• Saddle diameter 3.85”

KTI63105

2 Ton Low Profile Service Jack• 2 ton capacity low profile service jack for easy access under low

ground clearance vehicles• Lift range from 3.5” to 18.1”• Raises saddle to maximum height in 6.5 full pump strokes - no load• Saddle diameter 4.3” • Weighs: 67.2 lbs.

KTI63101

Jack Stands• Designed to be used in pairs• Steel base with four feet pads for stability• Ratchet action design with ductile iron support column• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

1250 Lb Capacity Car Dollies• Pair of 1250 pound capacity car dollies used to move a disabled vehicle• Made of steel structural tubing for durability• Four bearing mounted swivel caster wheels for easy maneuverability• Two locking caster wheels on each dolly to prevent vehicle from moving• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63820

1,500 Lb. Engine Sling• 1500 pound capacity engine sling for use with an engine crane• Level a load or adjust at angle for engine installation and removal• Hand crank and bearing mounted drive screw for easy adjustment• 4 mounting chains and brackets for quick attachment to engine• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI62115

Part No. Description SPECIALKTI61202 3 Ton Jack Stands - Pair Lifting Range: 11.6” to 16.75”. Weight: 16 lbs.

KTI61205 6 Ton Jack Stands - Pair Lifting Range: 15.75” to 24”. Weight: 32.5 lbs.

KTI61211 12 Ton Jack Stands - Pair Lifting Range: 19.63” to 30.25”. Weight: 75 lbs.

1000 Lb Single Stage Transmission Jack• Capacity: 1,000 lbs. • Lifting Range: 43.625”- 71”• Saddle tilt: 23 degrees forward

and 16 degrees backward• For automotive use up to light duty pickup trucks• Foot pedal activation easily raises single ram under load• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63502

6

63213 63214 1200 Lb Low Profile Transmission Jack• 1200 pound capacity transmission

jack with a lift range from 5.75” to 31.5”• For automotive use up to pickup truck transmissions• Wide front-open chassis for lower profile when loaded• Full swivel pump handle can be accessed in any work position• Fully adjustable universal saddle with load securing hardware• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63515

700 lb Pedestal Transmission Jack• Hand pumped, long stroke, single stage bottle jack,

with a release lever to discharge the load• Load-limiting and bypass valves prevent

against over loading and over extension• Adaptable saddle, with four angle brackets

that can adjust to fit transmission pan flanges• Adjustable safety chain included to aid in load restraint• 1 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63500

22 Ton Air Hydraulic Truck Jack• 22 ton capacity truck jack with a lift range from 9.06” to 17.94”• Narrow width fits between tandem wheels• Load-limiting and bypass valves prevent use

beyond rated capacity and overextension of ram• Spring activated self retracting ram• Release knob at the top of the T handle words at any handle position• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63194

50 Ton Air Hydraulic Truck Jack• 50 ton capacity truck jack with

lift range from 11.4” to 21.25”

KTI63198

700 Lb Engine Support Bar• Transverse support bar adjusts from 34.5” to 61”• Designed to support front wheel drive engines for

repair or motor mount replacement• Includes support leg for heavier engines or engines

requiring three point support• Engine attachment and adjustment hardware provided• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI62114

1,000 Lb Geared Engine Stand• 1000 pound capacity foldable engine stand

for convenient storage when not in use• Worm gear driven mounting plate with adjustable

fingers rotates for desired engine position• Four wheel design with locking caster

wheels to prevent stand from moving• Made of structural steel plate and tubing for added strength• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI62110

Ductile iron support column

1.5 Ton Foldable Engine Crane With Fast Rise• 750 Lbs. /1,500 Lbs. /2,250 Lbs. / 3,000 Lbs. capacity engine crane with four different boom positions• Legs and boom fold quickly for storage • 4.25” low profile base• Fast rise pump without a load• 48” long boom with chain and swivel hook included• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63421

2 Ton Trolley Jack• Lifting Range: 5.3” to 13.2”• Lightweight and compact design• Load-limiting and bypass valves prevent against over loading and over extension• Grab handle for easy positioning and carrying• 1 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63103

Bottle Jacks• Thick steel hydraulic base for maximum strength• Three-piece snap-fit pump handle for easy pumping and storage• Load-limiting and bypass valves prevent against over loading and over extension of ram• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63230 - 30 Ton• 30 ton bottle jack with lift range from 11.2” to 18.27”

KTI63250 - 50 Ton• 50 ton bottle jack with lift range from 11.8” to 18.8”

3.33 Ton Low Profile Service Jack• Lift range from 3.5” to 21.375”• 50” long pump handle for easy pumping under load• Dual pump piston power unit raises saddle to maximum

height in 8 full incremental pump strokes with no load• Load-limiting and bypass valves to prevent use beyond

rated capacity and over-extension of ram• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63133

LIFTING

800 Lb. H-Style Engine Stand• Capacity: 800 lbs • Weight: 49.8 lbs• H-frame design base with four wheels provides stability• Stand made of structural steel tubing for strength and

light enough for easy maneuverability• Fully adjustable mounting head and adapter fingers• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI62108

20 Ton Air Hydraulic Bottle Jack• Lifting Range: 10.43” - 19.88”• Air/hydraulic pump with air valve lever

reduces lifting time and provides ease of operation• Load limiting and bypass valves prevent use

beyond rated capacity and over extension of ram• Additional adjustable screw 3.25”• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63228

22 Ton Jack Stands• Pair of 22 ton capacity pin type jack

stands with support range from 11.825” to 19.75”• Height adjustment pin connected to base by way of lanyard to

prevent against loss• Steel plate and structural tubing for added strength and stability• V-shaped saddle to cradle axles and other truck components• Sold and to be used in pairs• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI61222

$69.95$103.45$69.95$119.95

$784.95

$260.45

$45.95

$440.45 $295.45

$299.45

$83.45

$57.45$113.95$254.95

$732.95$69.45

$161.95

$339.95

$360.95

$732.95

$443.45

$784.95

$853.45

$163.45

$576.95

$180.45

$286.45$339.95

CREEPERS

KNIFE

2.5 Ton Trolley Jack For SUV & Truck• 2.5 ton trolley jack with high lift design

for sport utility vehicles and trucks• Minimum height: 5.91”, maximum height 20.87”• Speed lift technology• Swivel saddle and swivel rear caster for easy positioning and safety• TUV / GS&CE approved • 2 year warranty

FMCF0001Folding Knife with Stainless Steel Blade, Black Finish• Lightweight and durable • Black finish blade• 420 Stainless steel blade • Folding knife with pocket clip• Ergonomic anodized aluminum handle• 1-Year Warranty

FMCFDK2

3 Ton Hydraulic Garage Jack• 3 ton hydraulic garage jack with high lift range• Minimum height: 15.31”• Maximum height: 19.68”• Heavy duty steel construction• 2 year warranty

FMCF0015

2 Ton Low Profile Floor Jack• 3.5” to 14.13” lift range• Extra long, low profile design for low clearance vehicles• Swivel saddle and swivel rear caster for easy positioning and safety• TUV / GS&CE approved• 2 year warranty

FMCF0010

2 Ton Trolley Jack• 2 ton trolley jack with high lift range• 5.25” to 13” lift range• Carrying handle on jack• Swivel saddle and swivel rear caster for easy positioning and safety• TUV / GS&CE approved• 2 year warranty

FMCF0009

Adjustable Pneumatic Seat• Rolling adjustable pneumatic seat• Convenient tool tray base• Thick padded, rotating seat with under seat hanger• Five swivel caster design for easy manuverability• Adjustable height 15” to 20”• Weight: 300 lb capacity• 2 year warranty

FMCF0007

Car Creeper / Seat Set• Thick padded cushions for added comfort• Adjustable backrest• Extra long 40” creeper easily coverts

from creeper to seat• Six swivel caster design for

easy maneuverability• Overall size: 40” x 15.94” x 4.13”• 2-year warranty

FMCF0006

Jack Stands (Pair)• Sturdy welded steel construction• One piece, multi-position ductile ratchet bar with double

safety pin provides fast, easy and secure adjustment which securely locks into desired location

• Large 4 legged steel base for added support and strength• 2-year warranty

LIFTING

1.5 Ton Mechanical Scissor Jack• 3,000 lb weight rated capacity• Wide base for additional stability• 3.75” to 15.35” lifting range • Total length: 17.72”• TUV / GS&CE approved • 2 year warranty

FMCF0004

Part No. Description SPECIALFMCF0003 2 Ton Jack Stands Min height: 10.83”, Max height: 16.54”

FMCF0002 3 Ton Jack Stands Min height: 11.22”, Max height: 16.73”

FMCF0014 6 Ton Jack Stands Min height: 15.55”, Max height: 23.81”

Bottle Jacks• Extension screw adds adjustment

to desired work height• 2-year warranty

Part No. Description SPECIALFMCF0011 6 Ton Bottle Jack Min height: 8.5”, Max height: 15.25”

FMCF0012 2 Ton Bottle Jack Min height: 7.13”, Max height: 13.58”

7

2 Ton Tripod Underhoist Stand• 2 ton under hoist stand designed to

help stabilize a vehicle suspended by an above-ground lift

• Support range from 68” to 76”• Acme threaded screw for 8” of

fine adjustment• Bearing mounted spin handle for

easy raising and lowering of screw• 24” triangle shaped base and 3.25”

square saddle provide additional stability• Complies With ASME PALD/2009

Safety Standards• 2 Year warranty on material

and workmanship

KTI61002

3/4 Ton Utility Underhoist Stand• Support under car components• Height range from 53” to 79”• Acme threaded screw for self-locking positioning• Bearing mounted spin handle for easy raising

and lowering of screw• 12” diameter base with 1.63” x 5.5” saddle• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI61076

3/4 Ton Utility Underhoist Stand with Pedal• Foot pedal to raise screw another 1.25” under

400 pounds of load

KTI61077

4 Ton Portable Ram Kit• 7,250 PSI hand pump and 10.5” long ram with 4.75” stroke• Basic attachments, .5 ton spreader ram, and five

extension tubes included

KTI63703

Portable Ram Kits• Portable ram kit for spreading,

bending, pushing, and clamping• Force gauge to measure force applied to work• Snap-fit design for quick attachment and tube connections• 2 Year Warranty on material and workmanship

10 Ton Portable Ram Kit• 8,050 PSI hand pump and 12.6” long ram with 5.12” stroke• Basic attachments, .5 ton spreader ram, and four

extension tubes included

KTI63709

DRAIN PANS

Super Single Axle Drain PanCatches oil, axle nuts, bearings - most anything removed from the wheel end for service. Works with most dual and super single wheel sizes 22.5 and 24.5, steel or aluminum wheels, hub piloted or stud piloted, drive or trailer axles. Attaches with a hand tightened lug nut. Will not tip or spill - virtually eliminating clean-up. Durable, lightweight HDPE plastic. Made in USA.

KTI74640

LUBE

Standard Lever Grease Gun 14oz• 6,000 PSI• Complete with 6” steel extension & coupler• 3-Way loading 14 oz cartridge, bulk and suction fill• 1-Year Warranty

KTI73905

Heavy Duty Lever Grease Gun 14 oz• Heavy duty aluminum die cast grease gun

head fitted with bulk loaded & air release• 3-way loading: 14 oz cartridge, bulk and suction fill• Grease gun handle fitted with rubber grip• Develops up to 10,000 PSI with built-in variable stroke• Supplied complete with 6” steel extension & coupler• 1-Year Warranty

KTI73942

Heavy Duty Pistol Grip Grease Gun 14 oz• Die cast aluminum head fitted with steel block nut• Complete with 18” flexible hose extension & coupler• 3-way loading: 14 oz cartridge, bulk and suction fill• 5,000 PSI • 1-Year Warranty

KTI73933

Suction Gun with 12” Vinyl Hose• Transfer gun designed to get gear oils both into and

out of gear boxes, transfer cases and differentials• Capacity 16 oz • 1-Year Warranty

KTI73919

Air Hydraulic Foot Pump• 10,000 PSI air/hydraulic foot pump requires 90 PSI air pressure• Designed to be used with single acting cylinders• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63716

ADHESIVE

Bonds Almost Anything in Seconds

Q-Bond® Adhesive Repair Kit• Rock solid in 10 seconds!• Ultra-strong adhesive and reinforcing powders• Repairs can be grinded, filed, sanded and even painted!• Includes 2 Q-BOND adhesive; 1 black reinforcing powder; 1 grey reinforcing powder

KTI90002

Q-Bond Large Repair Kit (QB3)Q-Bond can be used just as an adhesive or with the reinforcing powders that will help to repair almost anything. Q-Bond repairs can be grinded, filed, sanded and even painted. Each Q-Bond Large Repair kit includes six (6) bottles Q-Bond adhesive (0.35oz/10ml); two (2) bottles black reinforcing powder for plastics; one (1) bottle grey reinforcing powder for metals.

KTI90005

COIL SPRING TOOLS

Single Action Coil Spring Compressor Fits most American and some import cars.

KTI70375

MacPherson Heavy Duty Strut Spring Compressor• Works with most MacPherson Strut assemblies to quickly assist

in replacement of bent struts, strut tubes and damaged filters• Works on or off the vehicles. Acme threaded screw for durability• Made in USA.

KTI70371

Universal Strut Spring CompressorService a wide range of MacPherson struts without any special adapter shoes. Jaws are held by safety locking pins. Springs 4” to 9” O.D. and wire diameter of 7/16” to 11/16”.

KTI70372

McPherson Strut Spring Compressor • Works on most MacPherson strut assemblies• Use the compressor when replacing bent strut or strut tube

and damaged spindles• Acme threaded screw for durability• Not for use on GM “A”, “C”, “J” or “X” body cars• Use on or off vehicle

KTI70370

2 Ton Trolley / Jack Stand Set• 2 ton trolley jack with high lift range / jack stand set• Trolley jack lift range: 5.25” to 13” and jack stands

minimum height: 10.83”, maximum height 16.53”• Carrying handle on trolley jack. Swivel saddle and

swivel rear caster for easy positioning and safety• Jack stands have one piece, multi-position ductile ratchet

bar with double safety pin provides fast, easy and secure adjustment which securely locks into desired location

• Large 4 legged steel base for added support and strength• TUV / GS&CE approved• 2-Year Warranty

FMCF0008

$15.45

$300.45 $127.45

$70.95

$117.95

$83.95

$109.95

$37.45

$175.45

$46.45

$57.45

$109.95

$40.95

$27.95

$180.45

$180.45

$195.95

$366.45 $493.45

$38.45

$20.45

$26.95

$29.45

$15.45

$564.95

$21.45

$48.45$65.95

$73.45

$270.95

$47.45

8

Knife and Multi-Tool 2 Piece Combo Pack• Folding knife and 9-in-1 multi-tool set• Ergonomic aluminum handle with pocket clip• Stainless steel blade • Lightweight tools• Black finished 420 stainless steel blade• The multi-tool includes: plier, saw, saw for wood, flat screwdriver,

phillips screwdriver, knife blade, file, can opener and bottle opener

FMCFDK1

3 Piece Plier Set, 6” Slip Joint, Diagonal and Long Nose• 3 piece plier set, 6” slip joint, diagonal and long

nose are a good addition to any toolbox• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel,

lightweight and easy to use• Machined jaws help

grip securely

FMCFHT0099

3 Piece Plier Set With 8” Combination, 6” Diagonal and Long Nose• 3 Piece plier set, 8” combination, 6” diagonal and long nose are a good addition to any toolbox• Set includes multiple styles for a wide range of uses and applications• Made of carbon steel, lightweight and easy to use• Machined jaws help grip securely

FMCFHT0100

4 Piece Plier Set - 8” Universal, 6” Long Nose, Slip Joint, and Diagonal• 4 Piece Plier Set includes 8” universal, 6” long nose, slip joint, and

diagonal which make this set a good addition to any toolbox• Multiple styles for a wide range of uses and applications• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel • Lightweight and easy to use

FMCFHT0101

5 Piece Plier Set With Locking Pliers and Adjustable Wrench• 5 Piece plier set with locking pliers and adjustable wrench

are a good addition to any toolbox• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel, lightweight and easy to use• Machined jaws help grip securely• Set contains: 8” universal plier, 6” long nose plier, 6” diago-

nal cutter plier, 10” locking plier and 8” adjustable wrench

FMCFHT0102

Folding Stainless Steel Utility Knife• Lightweight stainless steel utility knife with interchangeable blades• Stainless steel blade holder • Back lock for folding• Quick exchange blade mechanism• Dimensions: Overall length 6.41”; Closed length 3.93”

FMCFHT0118

5 Piece Multi-Tool Gift Set• Includes: 9-in-1 multi-tool, 9-in-1 mini multi-tool, utility knife with storage/carrying pouch, 2-LED flashlight and key chain• Durable steel, lightweight tools• Ergonomic aluminum handles• Multi-tools are stainless steel• Utility knife has a stainless steel blade with a quick exchange

mechanism and a back lock for folding

FMCFHT0121

31 Piece Screwdriver Set• Ergonomic soft grip Ford handle for gripping power• S2 steel harder than CR-V steel• Handle holes to hang for storage• 3 slotted, 3 Phillips, 1 S2 bits driver, 13 (1”) S2 bits, 9

(1/4”) SAE CR-V sockets, 1” ADP and 4” magnetic dish

FMCFHTC0004S2

Rechargeable Spotlight 10W, 480 Lumen• 1 LED rechargeable spotlight 480 Lumens with

durable ABS housing and long lasting LED• Multiple lighting modes: High/Low/SOS mode• Waterproof and floats• Rechargeable 3.7V 2200mAh Lithium-Ion Battery with charging and discharging protection• Charge time: 40-60 minutes• Run time: 1 hour on high mode and 3 hours on low mode• AC/DC adapter and 12V car charger included

FMCFL1001

Rechargeable 16 LED Worklight/Flashlight• 16 LED worklight 50 Lumens/1 LED flashlight 25 Lumens,

ABS housing with rubber cover and long lasting LED’s• Strong magnet in the bottom with a hanging hook at the

top which can be turned down when not in use• Multiple lighting modes: High / Low / SOS• Rechargeable 3.7V 1300mAh Lithium-Ion Battery

with charging and discharging protection• Charge time: 6 hours

Run time: 4 hrs worklight / 10 hours flashlight• AC/DC adapter and 12V car charger

FMCFL1002

250 Lumens, “C” Battery Operated• Requires 3 “C” batteries• Run time: 8 hours

FMCFL1003

250 Lumens, AAA Battery Operated• Requires 3 “AAA” batteries• Run time: 2 hours

FMCFL1004

65 Lumen, Battery Operated• Requires 1 “AA” battery• Run time: 1-1/2 hours• Wrist strap provided

FMCFL1006

Rechargeable 3W LED Spotlight• 1 LED rechargeable spotlight 120 Lumens 3 watt,

impact resistant ABS housing, and long lasting LED• Hanging hook at the top which can be turned

down when not in use• Rechargeable 3.7V 1300mAh Lithium-Ion battery• Charge time: 6 hours Run time: 2 hrs High Mode / 4 hrs Low Mode• AC/DC adapter and 12V car charger• Wrist strap provided

FMCFL1010

FMCFL1012 - 120 Lumens• Multiple lighting modes: High/Low/Flash

FMCFL1014 - 250 Lumens• Multiple lighting modes: High/Low/Flash/SOS

10W Aluminum Worklight, 700 Lumens• Aluminum body, 1 LED worklight, and 700 Lumens• Long lasting LED with 5500K light color• 10 watt, 18/3 AWG SJTW, 4.92 ft. cord• Water, steam, and dust resistant• On/off switch

FMCFWL1000

FMCFWL1001 - 20W, 1400 Lumens

600 Lumen Rechargeable Aluminum Worklight, 10W• Aluminum body, 1 LED, rechargeable worklight 600 Lumens• Long lasting LED with 5500K light color• Lumens adjustment with 3 levels of brightness

(maximum 10 watts) and SOS function• Charging time: 3-1/2 hours;

Work time: 3 hours• Cigarette lighter charger and

indoor adapter included• Indoor/Outdoor approved

FMCFWL1002

Worklight With Fast Clamp and Stand, 2 x 20W, 2 x 1400 Lumen• Aluminum body and stand, 1 LED dual head integrated worklight 2 x 1400 Lumens• Long lasting LED with 5500K light color with impact resistance glass lens• 2 x 20 watt, 2.5M H05RN-F 3G 1.00mm2; 40W 2800 Lumens• H-stand and telescopic tripod that extends up to 49” with fast clamp• Weather-protected sealed switches, indoor/outdoor approved

FMCFWL1003

12 Piece Combination Wrench Sets• Chrome vanadium• Mirror smooth polished steel wrenches wipe clean fast• Heavy duty plastic elliptical panel storage case that can

be used for carrying or hanging wrenches• Available in fractional and metric sizes

Part No. Description Sizes SPECIALFMCFHTEI078EPIN 12 Piece Fractional Elliptical Panel Combination Wrench Set 1/4” to 1”

FMCFHTEI078EPMM 12 Piece Metric Elliptical Panel Combination Wrench Set 6mm to 18mm

HAND TOOLS

2 x 1400 Lumens

Exte

nds

up t

o 49

”

Folding Knife and 9-in-1 Multitool

Good Addition to ANY Toolbox

LIGHTING

160 Lumens, AA Battery Operated• Requires 2 “AA” batteries• Run time: 1-1/2 hours

FMCFL1005

9-In-1 Multi-Tool• Ergonomic aluminum handle• 420 Stainless steel blade• Durable steel• Tool includes: plier, saw, saw for wood, flat screwdriver, Phillips

screwdriver, knife blade, file, can opener and bottle opener

FMCFDK4

4 Piece Snap Ring Pliers• Dipping handle for comfort• Made of carbon steel, lightweight and easy to use• Set contains: four 7” snap ring pliers• Set includes multiple styles for a wide range of uses and applications

FMCFHT0112DH

18 Piece Screwdriver Set• S2 steel harder than CR-V steel• Real magnetic tips• Handle holes to hang for storage• Set contains: 4 slotted 5/16” x 6”, 1/4” x 4”, 3/16” x 3”, 1/4” x 1-1/2”; 4

phillips #3 x 6”, #2 x 4”, #1 x 3, #2 x 1-1/2”; 10 2” precisions 6 Torx T5, T6, T7, T8, T9, T10, 2 slotted 3/32” 1/8”, 2 phillips #0, #00

FMCFHTC0048S2

34 Piece Ratchet Screwdriver Set, SAE and Metric• Durable and impact resistant with S2 shock resistant steel bits• Twist reverse and ratchet lock knob mechanism• Extended shaft, works well in hard-to-reach areas• Set contains: 1 ratchet screwdriver, 1 S2 bit adapter, 15 S2 bits, 5 holders,

6-1/4” metric sockets (CR-V), 6-1/4” socket SAE (CR-V)

FMCFHTC0051S2

45 Piece Ratchet Screwdriver Set• Impact resistant with S2 shock resistant steel bits providing

strength and durability• Twist reverse and ratchet lock wheel mechanism• Half-extended shaft and easy bit changing• Set contains: 1 ratchet screwdriver, 1 S2 bit adapter (1”), 29 S2

(1”) bits - 1/8”, 5/32”, 3/16” (2), 1/4” (2), PH0, PH1 (2), PH2 (2), PH3 - PZ2, T10 - T30, S0 - S3, H1/8” - H1/4”, 5 S2 (2”) 3/16”, 1/4”, PH1 - PH3, 9 (1/4”) SAE socket CR-V 5/32” - 1/2”

FMCFHTC0056S2

5 Piece Plier Set, 7” And 8” Assorted• Set contains: 7” diagonal, 8” long nose, 8” slip joint,

8” universal and 8” groove joint• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel, lightweight, and easy to use• Machined jaws help grip securely

FMCFHT0103

Rechargeable Aluminum LED Flashlights• Aluminum housing, CREE XPE 1 LED rechargeable flashlight • Long lasting LED• Rechargeable 18650 Lithium-Ion

with a run time of 120 minutes• Wrist strap, battery, and charger included

Aluminum LED Flashlight, • Aluminum housing, CREE XPG 1 LED flashlight• Long lasting LED• Multiple lighting modes: High/Low/Flash

$29.95

$36.95

$55.95

$83.95

$115.95

$18.95

$18.95

$17.45

$39.45

$29.45

$46.45

$207.95

$95.45

$32.95

$31.45

$20.95

$23.95

$30.45

$44.45

$12.95

$70.45

$43.95$32.95

$20.45

$31.95

$48.45

$36.45

$22.45

$31.45