MECHANICAL SEALS - Florida Technical Products
2
A B (MIN) B (MAX) C (MIN) D E F G H I J K L 1.500 1.625 1.750 1.875 1.937 2.000 2.125 2.187 2.250 2.375 2.500 2.625 2.750 2.875 2.937 3.000 3.250 3.375 3.500 3.625 3.750 3.875 4.000 4.250 4.375 4.500 4.750 5.000 5.250 5.375 5.500 6.000 6.250 6.500 7.000 2.25 2.38 2.50 2.63 2.75 2.75 2.88 2.94 3.00 3.13 3.25 3.38 3.63 3.75 3.81 3.88 4.13 4.25 4.38 4.50 4.63 4.75 4.88 5.13 5.25 5.38 5.63 5.88 6.13 6.25 6.38 6.88 7.13 7.38 7.88 2.50 2.63 2.75 2.88 3.00 3.00 3.13 3.19 3.25 3.38 3.75 3.88 4.25 4.38 4.44 4.50 4.75 4.88 5.00 5.13 5.25 5.31 5.50 5.75 5.88 6.00 6.25 7.00 7.25 7.38 7.50 8.00 8.25 8.50 9.00 2.75 2.88 3.00 3.13 3.25 3.25 3.38 3.44 3.50 3.63 4.00 4.13 4.69 4.81 4.88 4.94 5.19 5.31 5.44 5.56 5.69 5.81 5.94 6.19 6.32 6.44 6.69 7.50 7.75 7.88 8.00 8.50 8.75 9.00 9.50 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .50 .50 .50 .50 .50 .50 .50 .50 2.94 3.06 3.19 3.31 3.44 3.44 3.56 3.62 3.69 3.81 4.06 4.19 5.03 5.15 5.21 5.28 5.53 5.66 5.78 5.91 5.94 6.07 6.28 6.44 6.56 6.69 7.03 7.63 7.88 8.00 8.13 8.63 8.88 9.13 9.63 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .66 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 .72 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.12 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.88 1.88 1.88 1.88 1.88 1.88 1.88 1.88 5.00 5.00 5.50 5.50 5.50 5.50 6.00 6.25 6.25 6.50 6.50 6.62 7.75 7.88 8.00 8.00 8.25 8.38 8.50 8.63 8.75 8.88 9.00 9.25 9.38 9.50 9.75 11.00 11.25 11.38 11.50 12.00 12.25 12.50 13.00 2.50 2.63 2.75 2.88 3.00 3.00 3.13 3.19 3.25 3.38 3.50 3.62 3.94 4.05 4.11 4.19 4.44 4.56 4.69 4.81 4.94 5.06 5.19 5.44 5.56 5.69 5.94 6.50 6.75 6.88 7.00 7.50 7.75 8.00 8.50 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.19 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 1200S M E C H A N I C A L S E A L S PPC’s SINGLE SPLIT SEAL Substantial savings in down-time. The 1200S is ready to run in a fraction of the time of other split seals, and cartridge seals. Can be installed without dismantling equipment. Repair kits are available for field repair of all 1200S seals. Less power consumption than packing resulting in a significant dollar savings $$$. Minimize heat generation due to balance design. Made in the U.S.A. • • • • • • H P.O. Box 52915 • 2769 Mission Drive • Baton Rouge, LA 70805 • (225) 356-4333 • FAX (225) 355-2126 • 1 (800) 731-7325 • www.ppcmechanicalseals.com M E C H A N I C A L S E A L S PPC’s SINGLE SPLIT SEAL 1200S .56 .56 .56 .56 .69 .56 .69 .69 .69 .69 .69 .69 .69 .72 .72 .72 .72 .72 .81 .81 .81 .81 .81 .81 .81 .81 .81 .94 .94 .94 .94 .94 .94 .94 .94 WARRANTY: PPC seals and seal parts are guaranteed to be free from defects in material and workmanship and are guaranteed to render satisfactory service when used for the purpose for which they are designed. Also available in popular metric sizes. ITEM DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 O-RING GLAND SEAM GASKET ROTARY COLLAR SET SCREWS O-RING ROTARY FACE O-RING STATIONARY FACE RETAINING CLIP O-RING CENTERING SPACERS SPRINGS COLLAR SEAM GASKET GLAND CAP SCREW / WASHERS ANTI-ROTATION PIN
Transcript of MECHANICAL SEALS - Florida Technical Products
A B (MIN) B (MAX) C (MIN) D E F G H I J K L1.5001.6251.7501.8751.9372.0002.1252.1872.2502.3752.5002.6252.7502.8752.9373.0003.2503.3753.5003.6253.7503.8754.0004.2504.3754.5004.7505.0005.2505.3755.5006.0006.2506.5007.000
2.252.382.502.632.752.752.882.943.003.133.253.383.633.753.813.884.134.254.384.504.634.754.885.135.255.385.635.886.136.256.386.887.137.387.88
2.502.632.752.883.003.003.133.193.253.383.753.884.254.384.444.504.754.885.005.135.255.315.505.755.886.006.257.007.257.387.508.008.258.509.00
2.752.883.003.133.253.253.383.443.503.634.004.134.694.814.884.945.195.315.445.565.695.815.946.196.326.446.697.507.757.888.008.508.759.009.50
1.781.781.781.781.781.781.781.781.781.781.781.782.062.062.062.062.062.062.062.062.062.062.062.062.062.062.063.003.003.003.003.003.003.003.00
.28
.28
.28
.28
.28
.28
.28
.28
.28
.28
.28
.28
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.38
.50
.50
.50
.50
.50
.50
.50
.50
2.943.063.193.313.443.443.563.623.693.814.064.195.035.155.215.285.535.665.785.915.946.076.286.446.566.697.037.637.888.008.138.638.889.139.63
.66
.66
.66
.66
.66
.66
.66
.66
.66
.66
.66
.66
.72
.72
.72
.72
.72
.72
.72
.72
.72
.72
.72
.72
.72
.72
.721.121.121.121.121.121.121.121.12
1.131.131.131.131.131.131.131.131.131.131.131.131.341.341.341.341.341.341.341.341.341.341.341.341.341.341.341.881.881.881.881.881.881.881.88
5.005.005.505.505.505.506.006.256.256.506.506.627.757.888.008.008.258.388.508.638.758.889.009.259.389.509.7511.0011.2511.3811.5012.0012.2512.5013.00
2.502.632.752.883.003.003.133.193.253.383.503.623.944.054.114.194.444.564.694.814.945.065.195.445.565.695.946.506.756.887.007.507.758.008.50
2.192.192.192.192.192.192.192.192.192.192.192.192.562.562.562.562.562.562.562.562.562.562.562.562.562.562.563.563.563.563.563.563.563.563.56
1200SM E C H A N I C A L S E A L S
PPC’s SINGLE SPLIT SEAL
Substantial savings in down-time.The 1200S is ready to run in a fraction of the time of other split seals, and cartridge seals.
Can be installed without dismantling equipment.
Repair kits are availablefor field repair of all 1200S seals.
Less power consumptionthan packing resulting in a significant dollar savings $$$.
Minimize heat generation due to balance design.
Made in the U.S.A.
•
•
•
•
••
H
P.O. Box 52915 • 2769 Mission Drive • Baton Rouge, LA 70805 • (225) 356-4333 • FAX (225) 355-2126 • 1 (800) 731-7325 • www.ppcmechanicalseals.com
M E C H A N I C A L S E A L S
PPC’s SINGLE SPLIT SEAL1200S
.56
.56
.56
.56
.69
.56
.69
.69
.69
.69
.69
.69
.69
.72
.72
.72
.72
.72
.81
.81
.81
.81
.81
.81
.81
.81
.81
.94
.94
.94
.94
.94
.94
.94
.94
WARRANTY: PPC seals and seal parts are guaranteed to be free from defects in material and workmanshipand are guaranteed to render satisfactory service when used for the purpose for which they are designed.
Also available in popular metric sizes.
ITEM DESCRIPTION
123456789
10111213141516
O-RINGGLAND SEAM GASKETROTARY COLLARSET SCREWSO-RINGROTARY FACEO-RINGSTATIONARY FACERETAINING CLIPO-RINGCENTERING SPACERSSPRINGSCOLLAR SEAM GASKETGLANDCAP SCREW / WASHERSANTI-ROTATION PIN
M E C H A N I C A L S E A L S
THESE ARE THE UNIQUE FEATURES AND BENEFITSAVAILABLE ONLY WITH THE PPC 1200S SPLIT SEAL.
LARGE INTERNAL CLEARANCES allow for excessive radial or axial movement.
ROTARY UNIT IS LOCKED TO SHAFT BY SET SCREWS virtually eliminating slippage of collar.
STATIONARY SPRINGS ARE ISOLATED from pumped fluid and unaffected if gland is misaligned.
DYNAMIC O-RING design provides clean area for the stationary component to advance beneath o-ring.
NO ADHESIVE INVOLVED ININSTALLATION which simplifies and speeds the procedure.
GLAND IS SELF-CENTERING. Spacers are affixed in place preventing their accidentalremoval.
ROTARY COLLAR POSITIONS WITHOUTMEASURING. Disposable spacer allows for quick, easy positioning.
1200SSPLITSEAL
1. Installed without dismantling equipment.2. Reduced maintenance and inventory costs.3. Won’t wear or score shaft sleeve.4. No packing gland to re-tighten.5. Operates with less leakage than packing.6. Lasts longer than packing.7. Less housekeeping than packing.8. Lower power consumption than packing (smaller carbon footprint)9. Field repairable10. Increases safety & reduces liability
1. Pumps2. Agitators3. Blenders4. Separators5. Refiners6. Dryers7. Mixers8. Any difficult to access rotating equipment.
1. Pulp and paper2. Power generation3. Wastewater treatment4. Mining5. Grain processing6. Pipeline7. Water systems8. Petroleum/ Chemical (non-hazardous)
ADVANTAGES OF A SPLIT SEAL
EQUIPMENT APPLICATIONS
APPLICABLE INDUSTRIES
TECHNICAL DATA:
MATERIALS OF CONSTRUCTION:
Sizes
Face Combinations
Springs
Elastomers
1 1/2” thru 7” *
250° F.
1 1/2” - 2 5/8”: 200 PSI, 3600 RPM
2 3/4” - 2 5/8”: 150 PSI, 1750 RPM.
4 7/8” - 7”: 100 PSI, 875 RPM
Temperatures
Operating Conditions
Rotary CollarGlandBolts
316SS
316SS
316SS
Ethylene Propylene, Fluoroelastomer, *AFLAS®
Alloy C276
Carbon vs Silicon CarbideSilicon Carbide vs Silicon Carbide
*Trademark of Asahi Glass
* For Larger Sizes Contact PPC Mechanical Seals
MADE IN THE USA EMPLOYEE OWNED
