Habasit – Solutions in motion

Mechanical pin splice: simple, fast, effective

NEW

Habasit‘s mechanical pin joint offers fast installation and reliable joining. This is ideal for reducing machine downtime during replacement and maintenance without sacrificing joining integrity and performance. This installation-friendly, profile-compatible joining method is suitable for all pitch sizes and conveying applications.

Tooth Profile (Pitch) Width

H 1.00” to 6.00”

T10 25 to 150 mm

AT10 25 to 150 mm

AT20 25 to 100 mm

8M 25 to 150 mm

14M 25 to 55 mm

*Not available for drive belts.

Easy installation, huge time savings

Habasit America805 Satellite Boulevard Suwanee, GA 30024-7124 Phone: (800) 458-6431 Fax: (800) 422-2748E-mail: info.america@habasit.comwww.habasitamerica.com

For further information, please contact your local Habasit representative: www.habasitamerica.com

Habasit’s unique pin splice makes belt installation simple. Precision holes through the entire belt width ensure pin placement is secure and reliable for most conveying applications. Installation is simple and fast, making the pin joint perfect for downtime reduction, hard-to-access belts, and multi-belt layouts.

Benefi ts

Fast and easy installation with minimal or no tools

Minimized downtime due to speed and ease of installation

Low-noise running resulting from elimination of exposed metal

No loss in minimum pulley requirements

Strong and durable joining that is suitable for most conveying applications

Available in the most common pitches

Excellent for belt applications with special backings including, but not limited to Linatex, NBR roughtop, 85 A urethane, PVC, Heatmate, foam, etc.

Pin joints can be installed on belts with or without covers. Request our HabaSYNC Timing Belt cover brochure to learn about all of our timing belt cover options.

Product liability, application considerationsIf the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifi cations and changes within a short time without prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL HABASIT nor its affi liated companies, directors, employees, agents OR contractors (hereinafter collectively “Habasit”) BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES, OR FOR LOSS OF BUSINESS REVENUES OR PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, DATA OR OTHER PECUNIARY LOSS, ARISING OUT OF THIS AGREEMENT, INCLUDING WITHOUT LIMITATION, THE USE OF OR INABILITY TO USE THE PRODUCTS, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, BE IT IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, EVEN IF HABASIT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL HABASIT’S MAXIMUM AGGREGATE LIABILITY UNDER THIS AGREEMENT, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, EXCEED THE AMOUNT ACTUALLY PAID FOR THE PRODUCTS. Pub Data: en01-14SUW