96

* Sold for export only and according to local regulations.

Graduation7 x 13 mm hose Air inlet side

coupler UseL (m) Hose P/N

(1) R-1822-Z 0,7 to 11 bar 1,5 39064-00 F-G 1/4

(1) 38879-58 0,7 to 11 bar 3 40117-67 F-G 1/4

(1) 35864-58 0,7 to 11 bar 3 39065-00 F-G 1/4

(1) 38902-58 0,7 to 11 bar 6 40122-67 F-G 1/4

(2) R-1821-Z 0,7 to 11 bar / 10 to 160 psi * 1,5 39064-00 F-G 1/4

39766-67 65088-67 65089-67

Intermediate-sized quick coupler for inflating gauges with a G 1/4 air inlet coupler

Teflon-coated threaded quick coupler G 1/4

Grooved junction coupler for hoseø int. 6 - 7 mm conical threaded G 1/4

P/N suffix: -Z or -58 or -67 = per unit

• Air inlet connector F G 1/4.• Watertight performance reinforced with a transparent dial.• Rubber protector around the measuring system.• Very high measuring accuracy with this level of accuracy maintained in the event of an impact on the device.• Robustness: IXEF material in glass fibre-reinforced high technology plastic.• Safety handle.• Corrosion resistant internal mechanism.• Air filtered in the indicator mechanism by stainless steel and nickel silver micro-porous filter.• Device resistant to accidental high pressure of 13.75 bar in compliance with the standard.

(1) (2)

graduated from 0.7 to 11 bar for inflating and checking of pressure

• EC approval certificate model LNE - 6951 rev. 3 of 1 July 2008.

• Conform to the European Directive 86/217/ECand to standard AFNOR EN 12645.AIR OR NITROGEN USE

EURODAINU

MECHANICAL INFLATING GAUGES WITH HANDLE

© 2012 Michelin

For UNIV’AIR and EURODAINU