MEC1012 Spring’04 Assignment 1 Part A Due during class Week 3
1
MEC1012 Spring’04 Assignment 1 Part A Due during class Week 3 Design Comm Rally Review of Design Communication I Similar to Assignment 8 from last semester, Part A of this assignment will involve creating a full set of working drawings for an assembly of parts. Completion of Part A is a prerequisite of Part B, Electronic Notebooks (web authoring). Each student must complete Assignment 1 Part A in order to get a passing grade in MEC 1012 Spring ’04. 1. As always start by creating your project (.ipj). Eventually, we will move to a web served drive, but for now start your project on the Q: drive under MEC/1012_Spr_04/CADD/Assignment 1/TXA 2. Draw a freehand iso concept sketch of an assembly of parts. Include a title, date, name and explanatory notes. 3. Using the default template, create; several parts and assemble them. (.iam & .ipt) MODEL THESE PARTS CONSISTANT WITH THE MIDTERM DESIGN GUIDE from Design Communication I. 4. Explode the assembly in the isometric view (.ipn), including all appropriate trails. 5. Using the default template, create a drawing file (.idw). Create the view from your .ipn. Include balloons and a parts list. 6. Create fully dimensioned working drawings of each part (.idw). Add center marks & center lines as appropriate. Use dimension styles based on the midterm design guide. Consider a two-place style as the default and use the design guide for exceptions. All drawing dimensions must match model dimensions (no rounding). Fully tolerance each drawing (consider using a tolerance block). Include an ANSI title block and border. 7. Print out your drawings (1:1) and turn them in for inspection. All packages must pass inspection (zero errors) before Part A is deemed complete. 8. All packages completed before the end or your lab in
description
MEC1012 Spring’04 Assignment 1 Part A Due during class Week 3 Design Comm Rally Review of Design Communication I. - PowerPoint PPT Presentation
Transcript of MEC1012 Spring’04 Assignment 1 Part A Due during class Week 3
MEC1012 Spring’04Assignment 1 Part A Due during class Week 3
Design Comm RallyReview of Design Communication I
Similar to Assignment 8 from last semester, Part A of this assignment will involve creating a full set of working drawings for an assembly of parts. Completion of Part A is a prerequisite of Part B, Electronic Notebooks (web authoring). Each student must complete Assignment 1 Part A in order to get a passing grade in MEC 1012 Spring ’04.
1. As always start by creating your project (.ipj). Eventually, we will move to a web served drive, but for now start your project on the Q: drive under MEC/1012_Spr_04/CADD/Assignment 1/TXA
2. Draw a freehand iso concept sketch of an assembly of parts. Include a title, date, name and explanatory notes.
3. Using the default template, create; several parts and assemble them. (.iam & .ipt) MODEL THESE PARTS CONSISTANT WITH THE MIDTERM DESIGN GUIDE from Design Communication I.
4. Explode the assembly in the isometric view (.ipn), including all appropriate trails.
5. Using the default template, create a drawing file (.idw). Create the view from your .ipn. Include balloons and a parts list.
6. Create fully dimensioned working drawings of each part (.idw). Add center marks & center lines as appropriate. Use dimension styles based on the midterm design guide. Consider a two-place style as the default and use the design guide for exceptions. All drawing dimensions must match model dimensions (no rounding). Fully tolerance each drawing (consider using a tolerance block). Include an ANSI title block and border.
7. Print out your drawings (1:1) and turn them in for inspection. All packages must pass inspection (zero errors) before Part A is deemed complete.
8. All packages completed before the end or your lab in week 1 will be judged for quality. The best packages will be proudly displayed.
