Measuring Instruments - Atel

Measuring Instruments

Air quality meters

#03077Net Price:

102,00 EURUnit: pcs

Humidity, temperature, carbon dioxide dataloggerThis data logger measures and stores relative humidity,temperature and carbon dioxide concentration readings. Youcan easily set up logging parameters and download recordeddata into PC's USB port.It has a large LCD display with a backlight.

Display: 3.5'' LCDLCD backlight: yesTemperature: -10 ÷ 70°C +/- 0.6°CHumidity: 0.1 ÷ 99.9% +/- 3% RHCarbon dioxide: 0 ÷ 9999ppm +/- (50ppm + 5%)Logging memory: 12700Power: 4x 1.5V AAA or by USB portOther: USB interface, Windows 8.1/10 software included

#03076Net Price:

157,00 EURUnit: pcs

PM10, PM2.5 detectorThis device measures the content of PM2.5 and PM10 dustparticles in the air.

PM10 dust is a mixture of airborne particles with a diameter ofless than 10 micrometers. These particles can reach theupper respiratory tract and lungs. The acceptable averagedaily concentration for PM10 dust is 50 µg / m3.

PM2.5 dust contains particles smaller than 2.5 micrometers indiameter. These particles, in addition to penetrating the upperand lower respiratory tract, can also enter the blood. Theacceptable average daily concentration for PM2.5 dust is 25µg / m3.

The meter is equipped with a laser detector that countssuspended dust particles. Measurement takes 50 seconds.After its completion, the result is presented in numerical andgraphic form on a colored air quality scale.

Display: 2.8'' LCD, 320x240 colorTemperature: 0 ÷ 50°C +/- 0.5°CHumidity: 0.1 ÷ 99.9% +/- 3% RHPM10, PM2.5 detection: 0 ÷ 1000 µg/m3 +/- 12%Sampling time: 50 sMemory: 999 setsPower: 9V, 6F22

#03061Net Price:

41,90 EURUnit: pcs

PM2.5 detectorThis small, portable meter measures the content of PM2.5dust particles in the air and shows the current concentrationof PM2.5 suspended dust on a clear LCD display.

PM2.5 dust contains particles smaller than 2.5 micrometers indiameter. These particles, in addition to penetrating the upperand lower respiratory tract, can also enter the blood. Theacceptable average daily concentration for PM2.5 dust is 25µg / m3.

Display: LCD, 3 digitsPM2.5 detection: 0 ÷ 1000 µg/m3 +/- 10%Sampling time: 3 sAuto power off: yesPower: 3,7V 450mAh Lithium battery

Digital multimeters

#06152Net Price:

167,00 EURUnit: pcs

FLUKE 114 - Digital Multimeter, True RMS,automatic range selectionFLUKE 114 is a measuring device enabling measurement ofconstant and alternating voltage (True RMS) and resistance.Perfect for quick fault diagnosis.

The set comes with a multimeter, test leads, a holster, a 9Vbattery (installed) and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 600 V +/- 0,5%AC voltage: 600 V +/- 1%Resistance: 40 MΩ +/- 0,9%Continuity test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 167 x 84 x 46 mmGuarantee: 36 monthsManufacturer: Fluke

#06153Net Price:

198,00 EURUnit: pcs

FLUKE 115 - Digital Multimeter, True RMS,automatic range selectionFLUKE 115 is a measuring device enabling measurement ofmeasurement of DC and AC voltage and current,capacitance, frequency and resistance.


LCD display: 6000Range selection: automatic/manualDC voltage: 600 V +/- 0,5%AC voltage: 600 V +/- 1%DC current: 10A +/- 1%AC current: 10A +/- 1,5%Resistance: 40 MΩ +/- 0,9%Capacitance: 10 mF +/- 1,9%Frequency: 50kHz +/- 0,1%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 167 x 84 x 46 mmGuarantee: 36 monthsManufacturer: Fluke

#06154Net Price:

232,00 EURUnit: pcs

FLUKE 116 - Digital Multimeter, True RMS,automatic range selectionFLUKE 116 is a measuring device enabling measurement ofconstant and alternating voltage, microampere current,capacitance, frequency, resistance and temperature. Perfectfor measurements in ventilation, air-conditioning and heatingdevices.


LCD display: 6000Range selection: automatic/manualDC voltage: 600 V +/- 0,5%AC voltage: 600 V +/- 1%DC current: 600 µA +/- 1%AC current: 600 µA +/- 1,5%Resistance: 40 MΩ +/- 0,9%Capacitance: 10 mF +/- 1,9%Frequency: 50kHz +/- 0,1%Temperature: -40 ÷ 400 °C +/- 0,1%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 167 x 84 x 46 mmGuarantee: 36 monthsManufacturer: Fluke

1/16 https://www.atel-electronics.eu 2021.12.01 17:10

https://www.atel-electronics.eu/produkt.php?hash=03077







#06155Net Price:

263,00 EURUnit: pcs

FLUKE 117 - Digital Multimeter, True RMS,automatic range selection, voltage detectorFLUKE 117 is a measuring device enabling measurement ofdirect and alternating voltage and current, capacity,frequency, resistance and temperature. Additionally, it isequipped with a non-contact voltage detector.

The set comes with a multimeter, test leads, a 9V battery(installed) and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 600 V +/- 0,5%AC voltage: 600 V +/- 1%DC current: 10A +/- 1%AC current: 10A +/- 1,5%Resistance: 40 MΩ +/- 0,9%Capacitance: 10 mF +/- 1,9%Frequency: 50kHz +/- 0,1%Continuity test: yesNon-contact AC voltage detector: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 167 x 84 x 46 mmGuarantee: 36 monthsManufacturer: Fluke

#06806Net Price:

815,00 EURUnit: pcs

FLUKE 1587 - Digital Multimeter, True RMS,automatic range selection, insulation testingFLUKE 1587 combines the functions of a digital insulationtester and a professional True RMS multimeter.

The set comes with a multimeter, test leads, a C101 case, aset of alligator clips, a test probe and a user manual.

LCD display: 6000Range selection: automatic/manualInsulation testing: range 0,1 MΩ do 2 GΩ, testing voltages50/100/250/500/1000 V, short-circuit current 1mA, maximumcapacitance 1µFDC voltage:1000 V +/- 0,09%AC voltage:1000 V +/- 2%DC current: 400mA +/- 0,2%AC current: 400mA +/- 1,5%Resistance:50 MΩ +/- 0,9%Capacitance:10 mF +/- 1,2%Frequency:100kHz +/- 0,1%Continuity test: yesDiode test: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 203 x 100 x 50 mmGuarantee: 36 monthsManufacturer: Fluke

#06128Net Price:

240,00 EURUnit: pcs

FLUKE 175 - Digital Multimeter, True RMS,automatic range selectionFLUKE 175 is a universal measuring device enablingmeasurement of basic quantities such as current, voltage andresistance as well as measurement of capacitance andfrequency.

The set comes with a multimeter, TL75 test leads, a 9Vbattery (installed) and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 1000 V +/- 0,15%, AC voltage: 1000 V +/- 1%DC current: 10 A +/- 1,0%AC current: 10 A +/- 1,5%Resistance: 50 MΩ +/- 0,9%Capacitance: 10000 µF +/- 1,2%Frequency: 100 kHz +/- 0,1%Diode test: yesContinuity test: yesAuto power off: yesData hold: yesTrue RMS: yesRelative measurement: yesBack light: noDimensions: 185 x 90 x 43 mmGuarantee: lifetime from manufacturerManufacturer: Fluke

#06129Net Price:

290,00 EURUnit: pcs

FLUKE 177 - Digital Multimeter, True RMS,automatic range selectionFLUKE 177 is a universal measuring device enablingmeasurement of basic quantities such as current, voltage andresistance as well as measurement of capacitance andfrequency.

The set comes with a multimeter, TL75 test leads, a 9Vbattery (installed) and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 1000 V +/- 0,09%, AC voltage: 1000 V +/- 1%DC current: 10 A +/- 1,0%AC current: 10 A +/- 1,5%Resistance: 50 MΩ +/- 0,9%Capacitance: 10000 µF +/- 1,2%Frequency: 100 kHz +/- 0,1%Diode test: yesContinuity test: yesAuto power off: yesData hold: yesTrue RMS: yesRelative measurement: yesBack light: yesDimensions: 185 x 90 x 43 mmGuarante: lifetime from manufacturerManufacturer: Fluke

#06130Net Price:

346,00 EURUnit: pcs

FLUKE 179 - Digital Multimeter, True RMS,automatic range selectionFLUKE 179 is a universal measuring device enablingmeasurement of basic quantities auch as current, voltage andresistance as well as measurement of capacitance andfrequency.

The set comes with a multimeter, TL75 test leads, a 9Vbattery, a temperature probe and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 1000 V +/- 0,09%, AC voltage: 1000 V +/- 1%DC current: 10 A +/- 1,0%AC current: 10 A +/- 1,5%Resistance: 50 MΩ +/- 0,9%Capacitance: 10000 µF +/- 1,2%Frequency: 100 kHz +/- 0,1%Temperature: -40 ÷ 400°C +/- 1,0%Diode test: yesContinuity test: yesAuto power off: yesData hold: yesTrue RMS: yesRelative measurement: yesBack light: yesDimensions: 185 x 90 x 43 mmGuarantee: lifetime from manufacturerManufacturer: Fluke

#04059Net Price:

332,00 EURUnit: pcs

FLUKE 233 Remote Display MultimeterThe NEW Fluke 233 True-rms Remote Display DigitalMultimeter gives you ultimate flexibility in unusualmeasurement scenarios. Place the removable display whereyou can see it and then put the meter where it is convenientfor you-no more juggling of leads and the meter whilestretching into a tight spot. You can now take measurementsin hard-to-reach places, where machines or panels arephysically separated from a limit or isolator switch, or in userprohibited areas such as clean rooms or hazardous areas.

LCD display: 6000Range selection: automatic/manualTrue RMS AC: YesRecord of measurements: Min/Max/AverageDC voltage: 0,1 mV do 1000 V +/- 0,25%AC voltage: 0,1 mV do 1000 V +/- 1,0%DC current: 1 mA do 10 A +/- 1,0%AC current: 1 mA do 10 A +/- 1,5%Resistance: 0,1 Ω do 40 MΩCapacitance: 1 nF do 9999 µFFrequency: 5 Hz - 50 kHz (Vac), 45Hz - 50kHz (Aac)Temperature: -40°C do +400°CPower: AA batteries - Three for main body; two for displayBattery life: 400hWireless frequency: 2.4 GHz ISM Band 10 meter rangeProtection: Rubber outer layerDimensions: 193 x 53 x 53 mm









#06218Net Price:

712,00 EURUnit: pcs

FLUKE 287 - Digital Multimeter, True RMS,automatic range selection, PC interfaceFLUKE 287 is a measuring device enabling measurement ofAC and DC voltage and current, capacitance, frequency,resistance, conductance and temperature.

The set comes with a multimeter, test leads, 6 AA batteries(installed) and a user manual.

LCD display: 50000Range selection: automatic/manualDC voltage: 1000 V +/- 0,025% AC voltage: 1000 V +/- 0,4% DC current: 10A +/- 0,06%AC current: 10A +/- 0,6%Resistance: 500 MΩ +/- 0,05%Conductance: 50 nS +/- 1,0%Capacitance: 100 mF +/- 1,0%%Frequency: 1MHz +/- 0,005%Temperature: -200 ÷ 1350 °C +/- 1,0%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesPC interface: yesDimensions: 203 x 100 x 50 mmGuarantee: UnlimitedManufacturer: Fluke

#06219Net Price:

778,00 EURUnit: pcs

FLUKE 289 - Digital Multimeter, True RMS,automatic range selection, PC interfaceFLUKE 289 is a measuring device enabling measurement ofAC and DC voltage and current, capacitance, frequency,resistance, conductance and temperature. It is equipped witha memory that stores 10,000 measurement results.

LCD display: 50000Range selection: automatic/manualDC voltage: 1000 V +/- 0,025% AC voltage: 1000 V +/- 0,4% DC current: 10A +/- 0,15%AC current: 10A +/- 0,75%Resistance: 500 MΩ +/- 0,05%Conductance: 500 nS +/- 1,0%Capacitance: 50 mF +/- 1,0%Frequency: 1MHz +/- 0,005%Temperature: -200 ÷ 1350 °C +/- 1,0%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesPC interface: yesDimensions: 203 x 100 x 50 mmPower: 4 AA batteries (R6)Guarantee: UnlimitedManufacturer: Fluke

#06158Net Price:

415,00 EURUnit: pcs

FLUKE 77IV - Digital Multimeter, automatic rangeselectionFLUKE 77IV is a measuring device enabling measurement ofbasic electrical parameters. It has a large, readable displaywith a bargraph, which makes it easier to notice changes inthe measured value.

Thes set comes with a multimeter, test leads, a 9V batteryand a user manual.

LCD display: 3200Range selection: automatic/manualDC voltage: 1000 V +/- 0,3% AC voltage: 1000 V +/- 2,0% DC current: 10A +/- 1,5%AC current: 10A +/- 2,5%Resistance: 50 MΩ +/- 2,5%Capacitance: 99,99 µF +/- 1,2%Frequency: 99,99 kHz +/- 0,1%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesBack light: yesBattery indicator:yesDimensions: 190 x 89 x 45 mmPower: 9V battery (6F22)Guarantee: UnlimitedManufacturer: Fluke

#06159Net Price:

607,00 EURUnit: pcs

FLUKE 83V - Digital Multimeter, True RMS,automatic range selectionFLUKE 83V enables precise measurement of voltages andfrequencies in equipment prone to electrical noise.Additionally, it is equipped with signaling of incorrectconnection of wires and the possibility of relativemeasurements.

The set comes with a multimeter, test leads, a holster, a 9Vbattery, two alligator clips and a user manual.

LCD display: 6000Range selection: automatic/manualDC voltage: 1000 V +/- 0,1% AC voltage: 1000 V +/- 0,5%DC current: 10A +/- 0,4%AC current: 10A +/- 1,2%Resistance: 20 MΩ +/- 0,4%Conductance: 60 nS +/- 1,0%Capacitance: 10 mF +/- 1,0%Frequency: 200kHz +/- 0,005%Continuity test: yesDiode test: yesAuto power off: yesData hold: yesBack light: yesBattery indicator:yesDimensions: 200 x 95 x 48 mmPower: 9V battery (6F22)Guarantee: UnlimitedManufacturer: Fluke

#06160Net Price:

615,00 EURUnit: pcs

FLUKE 87V - Digital Multimeter, True RMS,automatic range selectionFLUKE 87V enables precise measurement of voltages andfrequencies in equipment prone to electrical noise.Additionally, it is equipped with signaling of incorrectconnection of wires and the possibility of relativemeasurements.

The set comes with a multimeter, test leads, a holster, a 9Vbattery (installed), two alligator clips, a 80BK temperatureprobe and a user manual.

LCD display: 19,999Range selection: automatic/manualDC voltage: 1000 V +/- 0,1% AC voltage: 1000 V +/- 0,5%DC current: 10A +/- 0,4%AC current: 10A +/- 1,2%Resistance: 20 MΩ +/- 0,4%Conductance: 60 nS +/- 1,0%Capacitance: 10 mF +/- 1,0%Frequency: 200kHz +/- 0,005%Temperature: -200 ÷ 1090 °C +/- 1,0%Continuity test: yesRelative measurement: yesDiode test: yesAuto power off: yesData hold: yesTrue RMS: yesBack light: yesBattery indicator:yesDimensions: 200 x 95 x 48 mmPower: 9V battery (6F22)Guarantee: UnlimitedManufacturer: Fluke

#03961Net Price:

20,70 EURUnit: pcs

Mastech MS8221C - Digital MultimeterMS8221C is a practical, small, professional measuringinstrument with a large LCD display and an automaticalteration of measuring ranges. Useful for mostmeasurements, with a "HOLD" function (reading memory). Itenables acoustic control of circuit continuity, temperaturemeasurement with the use of the attached "K01" temperatureprobe, and testing of transistors.

Max. LCD display: 1999Range selection: automaticInsulation class: CAT III 600VDC voltage: 200m/2/20/200/600 V +/- 0,7%AC voltage: 200m/2/20/200/600 V +/- 0,8%DC current: 200u/2000u/20m//200 mA +/- 1,2%, 2/10A +/-2,0%AC current: 200u/2000u/20m//200 mA +/- 1,5%, 2/10A +/-3,0%Resistance: 200/2k/20k/200k/2 MΩ +/- 1,2%, 20 MΩ +/- 2,0% Capacitance: 20n/200n/2u/20u/200u/1000 uF +/- 4,0%Temperature: -20°C ÷ 1000°C +/- 3,0%Diode test: yeshFE test: yesContinuity test: yesData hold: yesBack light: yesAuto power off: yesPower: 3x 1,5V AAADimensions: 158x74x31 mmWeight: 220 gManufacturer: Mastech









#02933Net Price:

20,00 EURUnit: pcs

Mastech MY-68 - Digital MultimeterPerfect for engineers and technicians. Digital multimeter 3and 3/4 with an automatic range alteration and the possibilityof attaching a clamp meter. Frequency measurement up to200kHz.

Max. LCD display: 3999Range selection:manual/automaticDC voltage: 400m/4/40/400V +/-0,7%, 1000V +/-0,8%AC voltage: 400m +/-3,0%, 4/40/400V +/-0,8%, 750V +/-1,0%DC current: 0,4/4/40/400mA +/-1,2%, 10A +/-2,0%AC current: 0,4/4/40/400mA +/-1,5%, 10A +/-3,0%Resistance: 400/4k/40k/400k/4MΩ +/-1,2%, 40MΩ +/-2,0%Capacity: 4n +/-5,0%, 40n/400n/4µ/40µ/200µF +/-3,0%Frequency: 10/100/1k/10k/100k/200kHz +/-2,0%Bandwidth:40 ÷ 1000 HzDiode test:1mA / 1,5VhFE test: Ib=10µA / Vce=2,8VSound signaling:< 50 ΩData hold:yesBattery indicator:yesProtection:yesImpedance:10 MΩPower:9V 6F22 batteryManufacturer: Mastech

#03986Net Price:

56,90 EURUnit: pcs

Mastech MS8229 - Digital Multimeter 5 in 1The successor of the popular MS8209 meter, characterizedby a modern design with the full functionality of itspredecessor.

The MS8229 digital multimeter is a versatile measuringdevice. In addition to the standard functions, it offers thepossibility to carry out measurements of lighting intensity,humidity, sound intensity and temperature. The MS8229 isequipped with an automatic ranging feature.

Max. LCD display: 3999Range selection: automatic / manualDC voltage: 400m/4/40/400/600V +/- 0.7%AC voltage: 400m/4/40/400 V +/- 0.8%, 600 V +/- 1.0%DC current: 400µ/4000µ/40m/400 mA +/- 1.2%, 4/10 A +/-2.0%AC current: 400µ/4000µ/40m/400 mA +/- 1.5%, 4/10 A +/-3.0%Resistance: 400/4k/40k/400k/4M/40 MΩ +/- 1.0%Capacitance: 40n/400n/4µ/40µ/100 µF +/- 3.0 %Frequency: 10+/- 2,0%, 100/1k/10k +/- 1,5%, 100k/200kHz+/- 2,0%Duty cycle: 0.1% ÷ 99.9% +/- 3.0%Temperature: -20°C ÷ 1000°C +/- 5.0%=Humidity: 20% ÷ 95% relative humidity (RH) +/- 5.0% RHLight: 4000/40000 Lux +/- 5.0%Sound: 40dB ÷ 100dB +/- 4dBDiode test: yesContinuity test: yesData hold: yesRelative measurement: yesBack light: yesDimensions: 195x92x55 mmPower: 3x 1.5V AAA batteryManufacturer: Mastech

#03969Net Price:8,57 EURUnit: pcs

V&A MAS830 - Digital MultimeterThe MAS830 is a compact multimeter that offers accurate,repeatable measurements. Equipped with a buzzer - acousticsignaling of circuit continuity.

Max. LCD display: 1999Range selection: manualDC voltage: 200m/2/20/200 V +/- 0,5%, 600 V +/- 0,8%AC voltage: 200/600 V +/- 1,2%DC current: 200µ/2m/20m A +/- 1,0%, 200 mA +/- 1,5%, 10 A+/- 3,0%Resistance: 200/2k/20k/200 kΩ +/- 0,8%, 2MΩ +/- 1,0%Diode test: yeshFE test: yesContinuity test: yesData hold: yesPower: 9V (6F22) batteryDimensions: 138x69x31 mmWeight: 170 gManufacturer: V&A


V&A MAS830L - Digital multimeterMAS830L is a compact multimeter that offers accurate,repeatable measurements. Equipped with a buzzer - acousticsignaling of circuit continuity.

Max. LCD display: 1999Range selection: manualDC voltage: 200m/2/20/200 V +/- 0,5%, 600 V +/- 0,8%AC voltage: 200/600 V +/- 1,2%DC current: 200µ/2m/20m A +/- 1,0%, 200 mA +/- 1,5%, 10 A+/- 3,0%Resistance: 200/2k/20k/200 kΩ +/- 0,8%, 2MΩ +/- 1,0%Diode test: yeshFE test: yesContinuity test: yesData hold: yesBack light: yesPower: 9V (6F22) batteryDimensions: 138x69x31 mmWeight: 170 gManufacturer: V&A


V&A MAS838 - Digital multimeterMAS838 is a compact multimeter that offers accurate,repeatable measurements. Equipped with a buzzer - acousticsignaling of circuit continuity and temperature measurements.

Max. LCD display: 1999Range selection: manualDC voltage: 200m/2/20/200 V +/- 0,5%, 600 V +/- 0,8%AC voltage: 200/600 V +/- 1,2%DC current: 200µ/2m/20m A +/- 1,0%, 200 mA +/- 1,5%, 10 A+/- 3,0%Resistance: 200/2k/20k/200k/2 MΩ +/- 1,0%Temperature: -20°C ÷ 0°C +/- 10%, 0°C ÷ 400°C +/- 1%,400°C ÷ 1000°C +/- 2%Diode test: yeshFE test: yesContinuity test: yesData hold: yesPower: 9V (6F22) batteryDimensions: 138x69x31 mmWeight: 170 gManufacturer: V&A

#06162Net Price:

24,80 EURUnit: pcs

V&A MY-68 - Digital Multimeter with BargraphPerfect for engineers and technicians. Digital multimeter 3and 3/4 with automatic range selection and the possibility ofattaching a clamp ameter. Frequency measurement up to200kHz.

Max. LCD display: 3260Bargraph:yesRange selection:manual/automaticDC voltage: 400m/4/40/400V +/-0,7%, 1000V +/-0,8%AC voltage: 400m +/-3,0%, 4/40/400V +/-0,8%, 750V +/-1,0%DC current: 0,4/4/40/400mA +/-1,2%, 10A +/-2,0%AC current: 0,4/4/40/400mA +/-1,5%, 10A +/-3,0%Resistance: 400/4k/40k/400k/4MΩ +/-1,2%, 40MΩ +/-2,0%Capacity: 4n +/-5,0%, 40n/400n/4µ/40µ +/-3,0%Frequency: 10/100/1k/10k/100k/200kHz +/-2,0%Bandwidth:40 ÷ 1000 HzDiode test:1mA / 1,5VhFE test: Ib=10µA / Vce=2,8VSound signaling:< 50 ΩData hold:yesBattery indicator:yesProtection:yesImpedance:10 MΩPower:9V 6F22 batteryManufacturer: V&A









#03974Net Price:

38,10 EURUnit: pcs

V&A VA19 - Digital multimeter 5 in 1The modern VA19 digital multimeter is a 5 in 1 device. Inaddition to the standard electrical quantity meter, there is alsoa temperature, humidity, light intensity and sound intensitysensor. The variety of measured values, automatic selectionof the measuring range in combination with a large, readabledisplay facilitate measurements.

Max. LCD display: 3999Range selection: autoInsulation class: CAT III 600VDC voltage: 0,4/4/40/400/600 V +/- 0,7%AC voltage: 4/40/400/600 V +/- 0,8%DC current: 40/400 mA +/- 1,2%, 10 A +/- 2,0 %AC current: 40/400 mA +/- 1,5%, 10 A +/- 3,0 %Resistance: 400/4k/40k/400k/4 MΩ +/- 1,2%, 40 MΩ +/- 2,0%Capacitance: 4n/40n/400n/4µ/40µ/200µF +/- 3,0%Frequency: 10/100/1k/10k/100/200 kHz +/- 2,0%Temperature: -20°C ÷ 400°C +/- 3,0%, 400°C ÷ 1000°C +/-3,0%Humidity: 30% ÷ 95% RH +/- 5,0% RHLight: 4000/40000 Lux +/- 5,0%Sound: 35 ÷ 100 dB +/- 4dBDiode test: yesContinuity test: yesData hold: yesRelative measurement: yesBack light: yesPower: 9V (6F22) batteryDimensions: 185x85x44 mmPower: 9V battery (6F22)Manufacturer: V&A

#03978Net Price:

18,80 EURUnit: pcs

V&A VA20B - Digital multimeter withnon-contact AC voltage detectorThe VA20B multimeter measures voltage, current, resistanceand temperature with the use of the attached "K01"temperature probe. It enables testing of circuit continuity,testing of semiconductor diodes and transistors.

Additionally, it is equipped with a non-contact AC voltagedetector (enabling precise localization of live wires, built intowalls, for example) and a 1.5V, 3V and 9V battery tester.

Max. LCD display: 1999Range selection: automaticDC voltage: 200m/2/20/200/600 V +/- 0.7%AC voltage: 200m/2/20/200/600 V +/- 0.8%DC current: 200µ/2m/20m/200m/2/10 A +/- 1.2%AC current: 200µ/2m/20m/200m/2/10 A +/- 1.5%Resistance: 200/2k/20k/200k/2M/20M Ω +/- 1%Temperature: -20°C ÷ 1000°C +/- 1%Battery test: 1.5/3/9 VDiode test: yeshFE test: yesMaximum value measurement: yesContinuity test: yesNon-contact AC voltage detector: yesData hold: yesAuto power off: yesBattery indicator: yesBack light: yesPower: 3x 1.5V AAA batteryDimensions: 158x78x32 mmManufacturer: V&A

#04053Net Price:

56,20 EURUnit: pcs

V&A VA40R - Digital multimeter, TRUE RMS,USB connection, double displayVA40R multimeter measures basic electrical quantites suchas AC/DC voltage and current, resistance, capacitance andfrequency with very good accuracy.

It has a large, legible display with a bargraph with a maximumreading of 6600. Two measured values can be displayed atthe same time (e.g. AC voltage and its frequency).

The VA42RP meter is equipped with a fast sampling system,the frequency of sinusoidal waveforms can be measured inthe range up to 66kHz, and the frequency of pulse waveformsup to 2 MHz.

Measurement of alternating voltage is correct for waveformsof various shapes, the VA40R multimeter gives the True RMSvalue of the alternating voltage also with a constantcomponent.

The results of all measurements can be collected andanalyzed after connecting the multimeter to a computer, via aconnecting cable ended with a USB connector, thanks towhich the VA42RP can be connected to any new desktop orlaptop computer, which usually do not have a D-SUB RS-232connector.

The device has a solid housing with rubber protectionelements.

The set contains the multimeter, test leads a USB connectorto the PC, cables with an alligator clip, a CD with softwareand a user manual.

LCD display: 6600Range selection: automatic/manual DC voltage: 660mV +/-0.5%, 6,6V/66V/660V +/-0.8%, 1000V+/-1.0%AC voltage: 660mV/6,6V/66V/660V +/-1.2%, 1000V +/-1.5%DC current: 660µA/6600µA +/-1.0%, 66mA/600mA +/-1.5%,10A +/-1.8%AC current: 660µA/6600µA +/-1.5%, 66mA/600mA +/-1.8%,10A +/-2.0%Resistance: 660Ω/6,6KΩ/66KΩ/660KΩ/6,6MΩ +/-1.2%,66MΩ +/-2.0%Capacitance: 6,6nF +/-5.0%, 66n,660n/6,6µF +/-3.0%,66µ/660µ/6,6mF +/-5.0%Linear frequency: 6Hz~66kHz +/- (0.05%+8)Logic frequency: 6Hz~2MHz +/- (0.05%+8)Temperature: -55°÷0°C +/-5.0%, 1°÷1000° +/-2.0%Diode test: yesTrue RMS: yesAuto power off: yesBack light: yesAdditional features: USB interface, Windows 98/NT/2000/XPsoftwareDimensions: 190x90x40 mmPower: 1 x 9V (6F22) batteries

#04093Net Price:

44,50 EURUnit: pcs

V&A VA90A - Touch pad True RMS multimeterThe VA90A multimeter has a modern design, a touch panelinstead of a knob or buttons. The large and legible displayshows two values at once. In addition, it offers greatmeasurement possibilities - voltage and current of direct andalternating current, resistance, capacity, frequency andtemperature. Additionally, all values of variable waveforms inthe range from 10 to 400Hz are given as the true effectivevalue of this waveform (True RMS).

Max. LCD display: 5999Range selection: automaticDC voltage: 60m/600m/6/60/600/1000 V +/- 0,1%AC voltage: 60m/600m/6/60/600/1000 V +/- 0,8%DC current: 600µ/6000µ/60m/600m/6/10 A +/- 1,0%AC current: 600µ/6000µ/60m/600m/6/10 A +/- 1,8%Resistance: 600/6k/60k/600k/6M/60M Ω +/- 0,5%Capacitance: 6n/60n/600n/6µ/60µ/600µ/6m/60m F +/- 5,0%Frequency: 10/100/1000/10k/100k/1000k Hz +/- 0,1%Temperature: -200°C ÷ 1000°C +/- 2,0%Diode test: yesMaximum value measurement: yesRelative measurement: yesContinuity test: yesData hold: yesMemory: 10 data setsAuto power off: yesBattery indicator: yesBack light: yesPower: 2x 1.5V AA batteryManufacturer: V&A







Clamp multimeters

#06805Net Price:

785,00 EURUnit: pcs

FLUKE 355 - Digital Multimeter with pincers, TrueRMSDigital Clamp Multimeter with pincers for resistance, AC/DCvoltage and current measurement. Enables precisemeasurement of high currents- up to 2000A.

Range selection:automaticAC voltage:4÷600 V +/- 1%DC voltage:4÷1000 V +/- 1%AC current:40÷1400 A +/- 1,5%DC current:40÷2000 A +/- 1,5%Resistance:400 Ω ÷ 400 kΩ +/- 1,5%Frequency: 5Hz÷1kHzTrue RMS: yesSound signal:yesData hold:yesHighlighted LCD:yesBattery indicator:yesProtection:yesMax. clamp set:58 mmDimensions: 300 x 98 x 52 mmPower: 6x AA batteryWeight: 814gManufacturer: Fluke

#06146Net Price:

671,00 EURUnit: pcs

FLUKE 771 - Milliamp Process clamp meterEnables measuring for programmable controllers and I/Oanalog control systems. Measures input signals from relays inthe range of 4-20 mA without disconnecting the loop. Workingaltitude up to 2000m, working temperature -10 ÷ 50 ° C.

DC current: 4-20 mA +/- 0,2%, 10-50 mA +/- 1%Data hold:yesHighlighted LCD:yesProtection: IP 40Dimensions: 212 x 59 x 38 mmPower: 2x AA battery, avarage battery life 20hWeight: 260gManufacturer: Fluke

#06142Net Price:

329,00 EURUnit: pcs

FLUKE 902 - Digital Multimeter with pincers, TrueRMSDigital Clamp Multimeter with pincers for AC/DC voltage andcurrent measurement. DC current measurement is possibleafter connecting test wires. Additionally, it enables themeasurement of resistance, temperature, capacitance andfrequency. It has an acoustic indicator of circuit continuity,the"HOLD" function (reading memory) and highlighted LCDdisplay.

Range selection:automaticAC voltage:600 V +/- 1%DC voltage:600 V +/- 1%AC current:600 A +/- 1%DC current:200 µA +/- 1%Resistance:up to 600 Ω +/- 1.5%, up to 6000 Ω +/- 1.5%Frequency: 5÷400 Hz +/- 0.5%Temperature: -10° - 400°C +/- 1%Capacitance: 1 - 1000 µF +/- 1.9%Crest factor: 2.4 @ 500 A, 2.0 @ 600 ATrue RMS: yesSound signal:yesData hold:yesHighlighted LCD:yesBattery indicator:yesProtection:yesMax. clamp set:30 mmDimensions: 38 x 79 x 41 mmPower: 2x AA batteryWeight: 312gManufacturer: Fluke


Mastech M-266 - Digital Multimeter with pincers3 1/2 digits for heavy AC currentDigital clamp meter for measuring:- alternating voltage (AC) maximum 750V- alternating current (AC) maximum 1000A- resistance up to 20kΩ- circuit continuity control (with sound signaling)

Max.LCD display: 1999Range selection: manualDC voltage: 1000 VAC voltage: 750 VAC current: 1000 AResistance: up to 20 kΩAccuracy: 0.5%Sound signal: yesBattery indicator: yesProtection: yesMax. clamp set: 50 mmPower: 9V 6F22 batteryManufacturer: Mastech

#03096Net Price:

62,90 EURUnit: pcs

Mastech MS2125A - Digital clamp multimeterTrue RMSProffesional digital clamp meter for measuring AC/DC current,voltage, resistance, frequency and capacity. Measures TrueRMS and has a non-contact NCV voltage detector andflashlight.Equipped with an acoustic indicator of circuit continuity.

Max. LCD display: 5999Range selection: automaticDC voltage: 60m/600m/6/60/600 V +/- 0,5%, 1000 V +/- 0.8%AC voltage: 60m/600m/6/60/600 V +/- 0,6%, 750 V +/- 0,9%DC current: 60/600/1000 A +/- 2,0%AC current: 60/600/1000 A +/- 2,0%Resistance: 600/6k/60k/600k Ω +/- 0,8%, 6M/60M Ω +/- 2,0%Capacitance: 10n/100n/1000n/10u/100u/1000u/10m/100m F+/- 3,0%Frequency range: 10 Hz ÷ 10 MHz +/- 1.5%Duty cycle: 0,1% ÷ 99,9%Diode test: yesContinuity test: yesData hold: yesDimensions: 238x92x50 mmPower: 9V 6F22 batteryWeight: 386gManufacturer: Mastech

#03951Net Price:

16,20 EURUnit: pcs

Mastech MS2600 - Digital clamp multimeterDigital multimeter for measuring DC and AC voltage, ACcurrent, resistance, capacity, frequency, duty cycle. Equippedwith the HOLD function (reading memory) and backlit display."Open" measuring clamps enable quick measurements inhard-to-reach places.

Max. LCD display: 3999DC voltage: 4/40/400 V +/- 0.7%, 1000 V +/- 0.8%AC voltage: 4/40/400 V +/- 0.8%, 700 V +/- 1.0%AC current: 200 A +/- 3% (50 Hz ÷ 400 Hz)Resistance: 400/4k/40k/400k/4 MΩ +/- 1.2%, 40 MΩ +/- 2%Capacitance: 40n/400n/4µF +/- 4%Frequency: 10 Hz ÷ 100 kHz +/- 2%Duty cycle: 0.1 % ÷ 99.9 %Back light: yesPower: 9V 6F22 batteryDimensions: 192x68x43 mmWeight: 230 gManufacturer: Mastech

#07542Net Price:

12,40 EURUnit: pcs

Mastech MS2030 - Digital clamp multimeterSafe and reliable clamp mulitmeter for measuring alternatingcurrents.

Max. LCD display: 1999Range selection: manualDC voltage: 600 V +/- 1.0%AC voltage: 600 V +/- 1.5%AC current: 2/20/400 A +/- 2.0%Resistance: 2kΩ +/- 1.0%Continuity test: yesDiode test: yes Data hold: yesMax. diameter for conductor: Ø26 mmPower: 3x 1,5V AAA batteryManufacturer: Mastech










#04090Net Price:

70,00 EURUnit: pcs

Mastech MS2140C - Digital clamp multimeterwith infrared thermometerReliable digital clamp multimeter for measuring AC and DCcurrents. The device has an additional built-in non-contacttemperature meter - a pyrometer, for additional thermalcontrol of the tested elements.

MultimeterMax. LCD display: 5999Range selection: automaticInsulation class: CAT II 1000VDC voltage: 600m/6/60/600/1000 V +/- 0,5%AC voltage: 600m/6/60/600/1000 V +/- 0,8%DC current: 600/1000 A +/- 2,5%AC current: 600/1000 A +/- 1,8%Resistance: 600/6k/60k/600k +/- 0,8%, 6M/60M Ω +/- 1,2%Frequency range: 60/600/6k/60k/600k/6M/60M Hz +/- 0,3%Capacitance: 60n/600n/6µ/60µ/600µ/6m/60m F +/- 4%Temperature: -40÷500°C +/- 1,0%Continuity test: yesSampling time: 300msDiode test: yesMax. diameter for conductor: Ø40 mmPower: 3x 1,5V AAA batteryManufacturer: Mastech

Infrared thermometerTemperature: -20÷350 °C +/- 2,5%Field of view: 6÷1Emmisivity: 0,95Sampling time: 300msPower: 2xLR44

#04017Net Price:

21,00 EURUnit: pcs

V&A VA312 - Digital clamp multimeterAC current clamp multimeter with high max current range - upto 1000A. Additionally measures AC/DC voltage, resistance,frequency and capacity.

Max. LCD display: 5999Insulation class: CAT III 600VRange selection: automatic, manualDC voltage: 6/60/600 V +/- 0,8%, 1000 V +/- 1,0%AC voltage: 6/60/600/700 V +/- 1,2%AC current: 600 A +/- 2,5%, 1000 A +/- 3,0%Resistance: 600/6k/60k/600k/6 MΩ +/- 1,0%, 60 MΩ +/- 5,0%Capacitance: 600n/6µ/60µ/600µ/1000 µF +/- 4,0%Frequency: 40 Hz ÷ 100 kHz +/- 0,1%ADP measurement: 600 mV +/- 3,0%Continuity test: yesDiode test: yes Data hold: yesMAX/MIN function: yesBack light: yesAuto power off: yesMax. diameter for conductor: Ø42 mmPower: 3x 1,5V AAA batteryManufacturer: V&A

Multimeter kits

#06131Net Price:

402,00 EURUnit: pcs

FLUKE 179/EDA2 - Combo KitThe Combo Kit includes:- #06130 Fluke 179 True-rms Digital Multimeter,- TL910 Electronic Test Probes,- TL224 SureGripTM Silicone Test Leads resist heat,- AC280 SureGripTM Heavy Duty Hook Clips,- Fluke 80BK Integrated Temperature Probe,- ToolPak Meter hanging accessory to position and holdmeter to steel surfaces,- Fluke C35 Soft Case

#06132Net Price:

402,00 EURUnit: pcs

FLUKE 179/MAG2 - Combo KitThe Combo Kit includes:- #06130 Fluke 179 True-rms Digital Multimeter,- TL224 SureGripTM Silicone Test Leads resist heat,- AC220 SureGripTM Alligator Clips,- TP4 Slim Reach Test Probe (4 mm),- Fluke 80BK Integrated Temperature Probe,- ToolPak Meter hanging accessory to position and holdmeter to steel surfaces,- Fluke C35 Soft Case,- Mini Maglite Flashlight

#06386Net Price:

949,00 EURUnit: pcs

FLUKE 289/FVF - Digital Multimeter with softwareThe kit includes:- Fluke 289 True RMS multimeter #06219,- FlukeView Forms software,- PC connection cable,- TL71 Silicone Test Leads,- AC72 Alligator Clips,- Fluke 80BK Integrated Temperature Probe,- ToolPak Meter hanging accessory for hanging the meter,- Fluke C280 Soft Case,- 4 batteries (installed)

Voltage testers

#06293Net Price:

28,60 EURUnit: pcs

FLUKE 1AC II - Voltage detectorAlternating voltage detector. In order to use it, put the testeron the wire and if there is voltage on the line, the tip will turnred and a sound will be generated.

AC voltage: 200 - 1000VInsulation class: 1000 V, CAT IVSound alarm: yesDiode alarm: yesPower: 2x 1,5V AAA battery

#06294Net Price:

45,10 EURUnit: pcs

FLUKE LVD2 - Voltage detector / LightBright flashlight and voltage detector in one device.

AC voltage: 90 - 600 VInsulation class: 600V, CAT IVSound alarm: yesDiode alarm: yes, dual sensitivityPower: 1,5V AAA battery

#04060Net Price:

266,00 EURUnit: pcs

FLUKE T5-1000 - Electrical testerFLUKE T5-1000 electrical tester enables masuring voltage,current and resistance. It allows measuring current up to100A without breaking the circuit.

Max. LCD display: 1000Range selection: automaticAC voltage: 1000VDC voltage: 1000VAC current: 100AResistance: 1000ΩContinuity test: 0 - 400 ΩDimensions: 203 x 51 x 30,5 mmWeight: 380gManufacturer: Fluke











#06707Net Price:

160,00 EURUnit: pcs

FLUKE T5-600 - Electrical testerOpen clamp electrical tester enabling measuring current up to100A without breaking the circuit.

Max. LCD display: 1000Range selection: automaticAC voltage: 600VDC voltage: 600VAC current: 100AResistance: 1000ΩContinuity test: 0 - 400 ΩSound signaling: yesDimensions: 203 x 51 x 30,5 mmWeight: 380gManufacturer: Fluke


Voltage detector NF11BAlternating voltage detector. In order to use it, put the testeron the wire and if there is voltage on the line, the tip will turnred and a sound will be generated.Additionaly equipped with a flashlight helping with work inhard-to-reach places.

AC voltage: 90 - 1000VInsulation class: 1000 V, CAT IVSound alarm: yesDiode alarm: yesFlashlight: yesPower: 2x 1,5V AAA battery


Voltage detector NOYAFA NF-609CEasy in use alternating voltage detector. In order to use it, putthe tester on the wire and if there is voltage on the line, the tipwill turn red and a sound will be generated.Additionaly equipped with a flashlight helping with work inhard-to-reach places.

AC voltage: 50 - 1000VInsulation class: 600V CAT IV, 1000V CAT IIISound alarm: yesDiode alarm: yesFlashlight: yesAdjustable sensitivity: yesPower: 2x 1,5V AAA battery

Cable trackers

#03806Net Price:

22,40 EURUnit: pcs

Cable tester for multi-pairs cableSimple and functional device enabling performing basiccabling tests, i.e. connection map, telephone line voltage test,short circuit test. Additionally equipped with an analoggenerator with three modulated frequencies to choose from.

Tested cables: RJ-45, RJ-11Detected damage: short circuit, opening, crossed pairs,reverse pairs, separated pairs Additional functions: screen integrity test, two speed cablingtest, a flashlightDimensions: Transmitter - 64x31x119 mm, Receiver -49x26x177 mmWeight: Transmitter - 119.2g, Receiver - 68.8gPower supply: Transmitter - 3x1.5V AAA, Receiver - 9V 6F22

#03862Net Price:

17,60 EURUnit: pcs

Cable tester for multi-pairs cable (NOYAFANF-811)This wire tracker with a cable tester is a small and easy touse tool enabling long distance wiring tracing, patch cableorder verifying, wiring voltage inspection.

Tested cabling: RJ-45, RJ-11Additional functions: flashlightDimensions: Transmitter - 125x45x35 mm, Receiver -185x35x23 mmWeight: 113g (without batteries)Power supply: Transmitter - 9V 6F22, Receiver - 9V 6F22

#07482Net Price:

12,90 EURUnit: pcs

Cable trackerThe wire pair finder is designed to identify and search wireswithout disturbing their insulation.

Functions: - searching for broken wires,- searching for the place of cable damage,- detecting the ringing signal on telephone lines,- identification of the condition of the telephone line

Signal: sigle solid or dual alternating toneBattery type: 6F22 9V

#03055Net Price:

23,60 EURUnit: pcs

Digital cable tracker WT25CThe cable tracker is made for identifying and searchingcables without breaching their insulation.

Thanks to the use of a digital signal, the sound heard in thereceiver is free from any kind of interference that occurs whenusing analog finders.

Signal: dual alternating tone or digitalOutput signal level: 23V p-pBattery type: 2x 6F22 9V

#08221Net Price:

97,30 EURUnit: pcs

FLUKE PRO 3000 - Cable locatorThe Pro3000 Analog Tone and Probe is the best choice fortoning and tracing wires on non-active networks, specificallyfor identifying individual pairs with SmartToneTM technology.Angled bed-of-nails clips allow easy access to individualwires, and the RJ11 connector is ideal for use on telephonejacks. The large, loud speaker on the probe allows you to findwires quickly and easily behind drywall, wood, etc. Caseattached.

TransmitterSolid Frequency: 1000 HzOver Voltage Protection: 60VDCOutput Power in Tone Mode: 8 dBm 600OhmsOutput Voltage: 8 VDC dla pomiaru ciągłościBattery: 9V alkalineCase dimensions: 69 x 61 x 36 mmRecieverBattery: 9V alkalineTemp. operating: (-20 +60)CTemperatura storage: (-40 +70)CDimmensions: 249 x 41 x 33 mmWarranty: 12 months

#02903Net Price:

239,00 EURUnit: pcs

IntelliTone 200 Pro - signal probe, cable tester(Fluke Networks MT-8200-60-KIT)Tested cables: UTP, FTP, STP, RG59, RG6, CCTVSingle pair test: yesWiremap test: yesDetected malfunctions: break, short-circuit, crossed pairs,reverse pairsDetecting signals: EthernetDetecting connected devices: hub, network cardAdditional features: locate cables from large distance (1meter), precision locate cable pairs in wispsOperating temperature: 0°C ÷ 40°COperating humidity: 5% ÷ 95%, non-condensingPower: 2x 9V 6F22 batteryWarranty period: 12 monthsManufacturer: Fluke NetworksToner parametersDimensions: 141x75x32 mmDisplay: LEDControl: thumbwheel switchAuto power down: yesOuptut power: 5V p-pProbe parametersDimensions: 222x48x32 mmDisplay: 8x LED, 1x Sync LED Control: thumbwheel switch, volume control wheelAuto power down: yes

#08220Net Price:

177,00 EURUnit: pcs

IntelliTone 200 Probe (Fluke NetworksMT-8200-63A)Interface: Main RJ45 port for mapping all 4 UTP / STP cablingpairs.Dimensions: 222x48x32 mmDisplay: 8x LED, 1x Sync LED Control: thumbwheel switch, volume control wheelAuto power down: yes













#02309Net Price:

10,50 EURUnit: pcs

Mastech MS6812 - Signal probe, link testerThe wire pair finder is designed to identify and search wireswithout disturbing their insulation.

Functions:- searching for broken wires,- searching for the place of cable damage,- detecting the ringing tone on telephone lines,- identification of the telephone line condition.

Transmitter signal: 1.5KHzReceiver signal: 100 - 300kHzWeight [transmitter/receiver]: 114 / 106g Dimensions [transmitter/receiver]: 145x35x25 / 238x43x26mmBattery type: 6F22 9VManufacturer: Mastech

#04065Net Price:

32,40 EURUnit: pcs

Mastech MS6813 - Signal probe, link tester,network cable testerThe MS6813 is a kit that allows for testing telephone,computer and coaxial cables. The set includes a generator,which is also a cable tester and a wire pair finder.

Tested cables: 10 Base-T, EIA/TIA-568A, AT&T258A, TokenRingDetected faults: short, open, miswire, reversal, splitAdditional features: shield integrity test, debug mode fordetailed fault identification

Transmitter signal: 4kHzReceiver signal: 100Hz - 300kHzBattery type: 6F22 9VManufacturer: Mastech

#04066Net Price:

46,70 EURUnit: pcs

Mastech MS8236 - Digital multimeter with LANand phone testerEnables the measurement of all basic electrical quantities.Additionally, it is equipped with a cable tester and a generatorfor cooperation with the MS6812-R inductive probe (probeincluded in set).

Max. LCD display: 1999Range selection: autoDC voltage: 200m/2/20/200/600 V +/- 0,5%AC voltage: 200m/2/20/200/600 V +/- 0,8%DC current: 200µ/2m/20m/200 mA +/- 1,2%, 2/10A +/- 2,0%AC current: 200µ/2m/20m/200 mA +/- 1,5%, 2/10 A +/- 3,0%Resistance: 200/2k/20k/200k/2M/20M Ω +/- 1,0%Diode test: yesLCD backlight: yesData hold: yesNetwork cable test (RJ-11, RJ-45): T568A, T568B, 10Base-TPhone check: busy, ringing, clearShield integrity test: yesPower: 9V battery (6F22)Manufacturer: Mastech

Cable locators and detectors

#03869Net Price:

124,00 EURUnit: pcs

Cable locator (NOYAFA NF-826)nf-826 is ideal for tracing cables in walls/underground. Thisdevice can easily locate fuses and breakers on circuits or findinterruptions and short-circuits in cables, for example in floorheating systems. It also easily detects live cables and tracesmetallic pipes.

The kit includes a transmitter and a reciever.

#06384Net Price:

768,00 EURUnit: pcs

FLUKE 2042 - Cable locatorFluke 2042 is ideal for tracking cables in walls/underground.This device can easily locate fuses and breakers on circuitsor find interruptions and short-circuits in cables, for examplein floor heating systems and metallic pipes.

The kit includes a transmitter, a reciever, a test lead, a softcarrying case, a hard case, batteries and a user manual.

TransmitterVoltage measurement range: 12/50/120/230/400 VFrequency range: 0..60 HzOutput signal: 125HzVoltage: up to 400V AC/DCPower: 6 x 1,5V batteryDimmensions: 190 x 85 x 50 mmRecieverTracing depth cable location: 2.5m wall/underground cablesMain voltage detection: 0.4mLCD backlight: yesPower: 1 x 9V batteryDimmensions: 250 x 65 x 45 mm

#03071Net Price:

21,90 EURUnit: pcs

Mastech MS5902 - Circuit breaker finder andsocket testerThanks to the Circuit Breaker Finder/Socket Tester (MS5902)it is possible to check which fuse protects the socket withoutdisconnecting the power supply.The transmitting element can work in two modes: as a signalgenerator for the receiver and as a socket tester.

#04070Net Price:

133,00 EURUnit: pcs

Mastech MS6818 - Cable locatorMS6818 is ideal for tracing cables in walls/underground. Thisdevice can easily locate fuses and breakers on circuits or findinterruptions and short-circuits in cables, for example in floorheating systems. It also easily detects live cables and tracesmetallic pipes.


TransmitterPower: 6 x 1,5V batteryDimmensions: 190 x 89 x 42,5 mmRecieverLCD backlight: yesPower: 1 x 9V batteryDimmensions: 241,5 x 78 x 38,5 mmManufacturer: Mastech

#07443Net Price:

46,20 EURUnit: pcs

Noyafa NF-816 - Cable locatorNF-816 is ideal for tracing cables in walls/underground. Withthis device you can easily find interruptions and short-circuitsin cables, for example in floor heating systems. It is alsohelpful in tracing metallic pipes.


TransmitterPower: 1x6F22 9VMaximum range: 1000mDimmensions: 49x135x33 mmVoltage protection: 60V AC / 42V DCRecieverPower: 1 x 9V batteryTorch function: yesEar jack: 3.5mmMaximum measuring depth: 0.8mDimmensions: 43x168x27 mm

#03065Net Price:

47,10 EURUnit: pcs

Pipe locator PL33CThe PL33C pipe locator finds the course of metal andnon-metal pipelines. The set includes a transmitter and areceiver. The pipes are located by inserting a flexible wire - apilot that emits a strong modulated signal.

TransmitterPower: 1x 9V batteryDimmensions: 380 x 300 x 45 mmTransmission cable length: 20mRecieverPower: 1 x 9V batteryDimmensions: 410 x 85 x 50 mm












#03066Net Price:

68,60 EURUnit: pcs

Pipe locator PL33FThe PL33C pipe locator finds the course of metal andnon-metal pipelines. The set includes a transmitter and areceiver. The pipes are located by inserting a flexible wire - apilot that emits a strong modulated signal. It is also possibleto operate in a silent mode with signaling by vibration.

TransmitterPower: 3.7V 1800mAh Li-Ion batteryDimmensions: 380 x 300 x 45 mmTransmission cable length: 20mRecieverPower: 1 x 9V batteryDimmensions: 410 x 85 x 50 mm

Temperature & humidity meters

#04012Net Price:

10,00 EURUnit: pcs

V&A VA6502 - Digital thermometerDigital thermometer with a long, pointed probe at the tip. Widerange of measured temperatures.

Measurement range: -50 °C ÷ 270 °C (-58 °F ÷ 518 °F)Resolution: 0.1 °C (-50°C ÷ 200 °C); 1 °C (200°C ÷ 270 °C)Battery indicator: yesAuto power off: yesDimensions: 181(L) x 35(W) x 20(H) mmWeight: 65gManufacturer: V&A

Pirometers

#06149Net Price:

167,00 EURUnit: pcs

FLUKE 561 - Infrared thermometer withthermocouple socketHandy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It alsoprovides the possibility of contact measurement. Equippedwith a laser viewfinder that allows you to track themeasurement point.

The set includes a pyrometer, a K-type probe with Velcro, aportable bag and 2x AA batteries

Measurement range: -40 °C ÷ 550 °C +/- 1%Resolution: 0,1 °CField of view: 12÷1Typical distance to target: up to 5mEmissirity: regulated 0,3/0,7/0.95Back light: yesOther: °C/°F display selectionPower: 2x AA batteryGuarante: 24 monthsManufacturer: Fluke

#06342Net Price:

422,00 EURUnit: pcs

FLUKE 566 - Infrared thermometer withthermocouple socket and memoryHandy device for measuring the temperature ofhard-to-reach, live or dangerously hot robjects. It alsoprovides the possibility of contact measurement. Equippedwith a laser viewfinder that allows you to track themeasurement point, a graphic display and the function ofrecording the measurement results.

The set includes a pyrometer, a K-type probe, a portable bagand 2x AA batteries

Measurement range: -40 °C ÷ 650 °C +/- 1%, K type probe-270 °C ÷ 1372°C +/- 2,2 °C +/- 1%Resolution: 0,1 °CField of view: 30÷1Typical distance to target: up to 15mEmissivity: regulated 0,10 ÷ 1,00 with step 0,01, in memorythe emissivity table of typical materialsBack light: yesOther: °C/°F display selectionMemory: 20 measurement results with date and timePower: 2x AA batteryGuarante: 24 monthsManufacturer: Fluke

#06343Net Price:

527,00 EURUnit: pcs

FLUKE 568 - Infrared thermometer withthermocouple socket and memory, PC USBinterfaceHandy device for measuring the temperature ofhard-to-reach, live or dangerously hot robjects. It alsoprovides the possibility of contact measurement. Equippedwith a laser viewfinder that allows you to track themeasurement point, a graphic display and the function ofrecording the measurement results. The recorded data canbe analyzed by using the included software.

The set includes a pyrometer, FlukeView Forms software, aUSB port, a K-type probe, a portable bag and 2x AA batteries

Measurement range: -40 °C ÷ 800 °C +/- 1%Resolution: 0,1 °CField of view: 50÷1Typical distance to target: up to 15mEmissirity: regulated 0,10 ÷ 1,00 with step 0,01Back light: yesOther: °C/°F display selectionMemory: 99 measurement results with date and timePC interface: yesSoftware: included FLukeView FormsPower: 2x AA batteryGuarante: 24 monthsManufacturer: Fluke








#03868Net Price:

15,50 EURUnit: pcs

Forehead IR thermometer HT11DForehead Infrared Thermometers for non-contact bodytemperature measurement. The measurement is made from adistance of several centimeters. The device is characterizedby high accuracy (0.2 ° C) and fast measurement time (0.5seconds). It allows for quick and safe detection of increasedbody temperature.Additionaly, it can measure the surface temperature ofobjects, so it can be used as a classic pyrometer.

The device can be used for fast detection of people withincreased body temperature, e.g. before entering a shop oroffice. Initial temperature measurement is possible from adistance of about 1 m. It is also possible to manually calibratethe thermometer readings.

Warning!The HT11D thermometer is not a medical device.Always use a clinical thermometer when highly accurate bodytemperature measurements are required.

Measurement range (Body): 32 °C ÷ 42.5°CMeasurement range (Surface): 0 °C ÷ 60.0°COperation temperature range: 0°C ÷ 40°CResolution: 0.1 °CAccuracy: 0.2 °CResponse time: 0.5 secBack light: yesData hold: yesAuto power off: yesPower: 9V 6F22 battery

#03863Net Price:

81,00 EURUnit: pcs

High temperature infrared thermometerProfessional, handheld, easy to use pyrometer fornon-contact temperature measurement. Equipped with a lasersight, it analyses thermal radiation emitted by the examinedbodies. It offers an unusually wide measuring range, up to1600° C.

Measurement range: -50 °C ÷ 1600°CResolution: 0.1 °C <1000°C, 1°C >1000°CMeasured values: max, min, max-min, averageRange selection: automaticField of view: 50÷1Back light: yesLaser power: < 1 mWEmissitivity: adjustable in the range of 0.1 ÷ 1.00 in 0.01 steps

Battery indicator: yesData hold: yesAuto power off: yesMemory: 100 readingsPower: 9V 6F22 batteryWeight: 295g

#03864Net Price:

114,00 EURUnit: pcs

High temperature infrared thermometerProfessional, handheld, easy to use pyrometer fornon-contact temperature measurement. Equipped with a lasersight, it analyses thermal radiation emitted by the examinedbodies. It offers an unusually wide measuring range, up to2200° C. Additionally, it enables precise contact temperaturemeasurement with the K-type probe included in the kit.

Measurement range: -50 °C ÷ 2200 °CResolution: 0.1 °C < 1000°C, 1°C > 1000°CMeasured values: max, min, max-min, averageRange selection: automaticField of view: 50÷1Back light: yesLaser power: < 1 mWEmissitivity: adjustable in the range of 0.1 ÷ 1.00 in 0.01 stepsBattery indicator: yesData hold: yesAuto power off: yesMemory: 100 readingsPower: 9V 6F22 batteryWeight: 295g

Thermal imagers

#03068Net Price:

233,00 EURUnit: pcs

ATC-02 - Thermal ImagerThermal imaging cameras are used wherever temperature isimportant for the course of the assumed processes.Excessive heating of devices may indicate their malfunction.The implementation of preventive measures in the form ofperiodic inspections with the use of a thermal imaging cameraenables the elimination of failures and downtime in productionprocesses in many industrial plants. Thermal imagingcameras are used, among others, for inspections and tests ofelectricity distribution systems, electromechanical devices,buildings and roofs, tanks, pipes, valves and tanks.

The ATC-02 thermal imaging camera is ideal for controllingventilation, air-conditioning and heating systems. It is alsoperfect for imaging the temperature of electrical switchboards,engine components, etc.

The infrared image is recorded by a matrix with a resolution of60x60, the camera has a sensitivity of 0.15 ° C, thanks towhich even the smallest temperature differences can befound in the thermal image. It also records the visible image,and thanks to the possibility of overlapping images recordedin the visible and infrared light bands, it makes it much easierto locate points of high or low temperature.

The temperature data is stored as a matrix of thousands ofpoints. The obtained data can be analyzed both at the placeof measurement and on a PC. The ATC-02 camera isequipped with a memory card reader that saves images inbmp format.

Field of view (FOV): 20° horizontal, 20° verticalMin focus distance: 0.5 mThermal sensitivity (NETD): 0.15°CDetector type: 60x60Temperature range: -20°C to 300°C +/- 2% or 2°C (whicheveris grater)Emissivity: regulatedDisplay: 2.4 inch large color LCD, IR-Fusion (infrared andclassic picture at once)Refresh rate: 6HzColor palettes: 3Memory: 4GB microSD memory cardFile formats supported: BMPPower: 4x 1.5V AA batteryDimensions: 230x80x52 mmWeight: 0,32 kg

#03067Net Price:

195,00 EURUnit: pcs

ATC-02D - Thermal ImagerThermal imaging cameras are used wherever temperature isimportant for the course of the assumed processes.Excessive heating of devices may indicate their malfunction.The implementation of preventive measures in the form ofperiodic inspections with the use of a thermal imaging cameraenables the elimination of failures and downtime in productionprocesses in many industrial plants. Thermal imagingcameras are used, among others, for inspections and tests ofelectricity distribution systems, electromechanical devices,buildings and roofs, tanks, pipes, valves and tanks.

The ATC-02D thermal imaging camera is ideal for controllingventilation, air-conditioning and heating systems. It is alsoperfect for imaging the temperature of electrical switchboards,engine components, etc.


The temperature data is stored as a matrix of thousands ofpoints. The obtained data can be analyzed both at the placeof measurement and on a PC. The ATC-02D camera isequipped with a memory card reader that saves images inbmp format.

Field of view (FOV): 33° horizontal, 33° verticalMin focus distance: 0.5 mThermal sensitivity (NETD): 0.15°CDetector type: 32x32Temperature range: -20°C to 300°C +/- 2% or 2°C (whicheveris grater)Emissivity: regulatedDisplay: 2.4 inch large color LCD, IR-Fusion (infrared andclassic picture at once)Refresh rate: 6HzColor palettes: 3Memory: 4GB microSD memory cardFile formats supported: BMPPower: 4x 1.5V AA batteryDimensions: 230x80x52 mmWeight: 0,32 kg

#03069Net Price:

233,00 EURUnit: pcs

ATC-03 - Thermal ImagerThermal imaging cameras are used wherever temperature isimportant for the course of the assumed processes.Excessive heating of devices may indicate their malfunction.The implementation of preventive measures in the form ofperiodic inspections with the use of a thermal imaging cameraenables the elimination of failures and downtime in productionprocesses in many industrial plants. Thermal imagingcameras are used, among others, for inspections and tests ofelectricity distribution systems, electromechanical devices,buildings and roofs, tanks, pipes, valves and tanks.

The ATC-03 thermal imaging camera is ideal for controllingventilation, air-conditioning and heating systems. It is alsoperfect for imaging the temperature of electrical switchboards,engine components, etc.


The temperature data is stored as a matrix of thousands ofpoints. The obtained data can be analyzed both at the placeof measurement and on a PC. The ATC-03 camera isequipped with a memory card reader that saves images inbmp format.

Field of view (FOV): 39° x 31°Min focus distance: 0.5 mThermal sensitivity (NETD): 0,15°CDetector type: 80x60Temperature range: -20°C to 300°C +/- 2% or 2°C (whicheveris grater)Emissivity: regulatedDisplay: 2.4 inch large color LCD, infrared and classic pictureat onceRefresh rate: 6HzColor palettes: 3Memory: 4GB microSD memory cardFile formats supported: BMPPower: 4x 1.5 AA batteryDimensions: 230x80x52 mmWeight: 0.41 kg









#03084Net Price:

2 050,00 EURUnit: pcs

Flir E6xt - Thermal ImagerThermal imaging cameras are used wherever temperature isimportant for the course of the assumed processes.Excessive heating of devices may indicate their malfunction.The implementation of preventive measures in the form ofperiodic inspections with the use of a thermal imaging cameraenables the elimination of failures and downtime in productionprocesses in many industrial plants. Thermal imagingcameras are used, among others, for inspections and tests ofelectricity distribution systems, electromechanical devices,buildings and roofs, tanks, pipes, valves and tanks.

The Flir E6 WiFi Thermal Imager is ideal for searching andsolving problems in buildings, electric installations andmachines. Thanks to the detector resolution of 240x180pixels, very good thermal sensitivity and a wide field of view, itwill be perfect for detailed inspections, also from aconsiderable distance.

In addition, it allows communication with a smartphone viaWiFi or with a computer via a micro USB port.

Field of view (FOV): 45° horizontal, 34° verticalMin focus distance: 0.5 mThermal sensitivity (NETD): 0,06°CDetector type: 240x180Temperature range: -20°C to 250°C +/- 2% or 2°C (whicheveris grater)Emissivity: regulatedDisplay: 3.0 inch large color LCDRefresh rate: 9HzColor palettes: 3File formats supported: JPEG with 14-bit measurement dataPower: 3.6V lithium-ion batteryAdditional: WiFi connectivity with mobile devices, micro USBWeight: 0,575 kg

#03085Net Price:


Flir E8xt - Thermal ImagerThermal imaging cameras are used wherever temperature isimportant for the course of the assumed processes.Excessive heating of devices may indicate their malfunction.The implementation of preventive measures in the form ofperiodic inspections with the use of a thermal imaging cameraenables the elimination of failures and downtime in productionprocesses in many industrial plants. Thermal imagingcameras are used, among others, for inspections and tests ofelectricity distribution systems, electromechanical devices,buildings and roofs, tanks, pipes, valves and tanks.

The Flir E8xt Thermal Imager is ideal for searching andsolving problems in buildings, electric installations andmachines. Thanks to the detector resolution of 320x240pixels, very good thermal sensitivity and a wide field of view, itwill be perfect as a building camera.

In addition, it allows communication with a smartphone viaWiFi or with a computer via a micro USB port.

Field of view (FOV): 45° horizontal, 34° verticalMin focus distance: 0.5 mThermal sensitivity (NETD): 0,05°CDetector type: 320x240Temperature range: -20°C to 250°C +/- 2% or 2°C (whicheveris grater)Emissivity: regulatedDisplay: 3.0 inch large color LCDRefresh rate: 9HzColor palettes: 3File formats supported: JPEG with 14-bit measurement dataPower: 3.6V lithium-ion batteryAdditional: WiFi connectivity with mobile devices, micro USBWeight: 0,575 kg

Distance meters

#07524Net Price:

11,70 EURUnit: pcs

E-Sun EM58 - Digital distance meter, dual unitmeasurementThe EM58 uses two units - transmitting and receiving. It cantake measurements by bouncing sound waves off flatsurfaces such as walls or ceilings in the "single unit mode" orby sending infrared light signals to the remote unit andrecieving sound waves back in "dual unit mode".

The measurement takes place as follows: when themeasurement is triggered, the main unit sends an infraredsignal to the remote unit, which in turn transmits an ultrasonicsignal. Thanks to this solution, the measurement system isless susceptible to interference caused by obstacles on themeasurement line.

Measurement method: ultrasonicResolution: 0.01mMeasurement range: 0.5 ÷ 18m +/- 0.5%Measurement unit: meters or feetAuto power off: yesPower: 9V 6F22 batteryDimensions: 150x75x42 mm, 120x77x28mmWeight: 130g, 95g

#03875Net Price:

18,80 EURUnit: pcs

Noyafa NF-271 - Digital distance meter 50mDevice allows to measure distance, height, area and volume.Accurate laser measurements up to 50 meters.

Measurement method: laserResolution: 0.001mMeasurement range: 0.05 ÷ 50m +/- 0.0015mMeasurement unit: meters or feetAuto power off: yesPower: 3*1,5V AAA batteryDimensions: 119x50x26 mmWeight: 100gManufacturer: Noyafa

#03876Net Price:

21,00 EURUnit: pcs

Noyafa NF-271 - Digital distance meter 70mDevice allows to measure distance, height, area and volume.Accurate laser measurements up to 70 meters.

Measurement method: laserResolution: 0.001mMeasurement range: 0.05 ÷ 70m +/- 0.0015mMeasurement unit: meters or feetAuto power off: yesPower: 3*1,5V AAA batteryDimensions: 119x50x26 mmWeight: 100gManufacturer: Noyafa

#03877Net Price:

37,40 EURUnit: pcs

Noyafa NF-272L - Digital distance meter 100mDevice allows to measure distance, height, area and volume.Accurate laser measurements up to 100 meters.

Measurement method: laserResolution: 0.001mMeasurement range: 0.05 ÷ 100m +/- 0.0015mMeasurement unit: meters or feetAuto power off: yesPower: 3.7V built-in batteryDimensions: 119x50x26 mmWeight: 100gManufacturer: Noyafa









Anemometers

#04069Net Price:

89,00 EURUnit: pcs

Mastech MS6300 - Multifinctions environmenttesterThis multifunctional environment tester can measuretemperature, relative humidity, sound level, light level(illuminance), wind speed and air flow.

Range selection: automaticTemperature: -10°C ÷ 60°C +/- 1,0°CHumidity: 20% ÷ 80% relative humidity (RH) +/- 3.0% RHLight: 0÷50000 Lux +/- 5.0%Sound: 30dB ÷ 130dB +/- 1.5dBAnemometer: 0.4÷20m/s +/- 3.0%Air Flow (CMM): 0÷999900CMM +/- 3.0%Data hold: yesRelative measurement: yesMaximum value measurement: yesDimensions: 280x89x50mmPower: 1x9V 6F22Manufacturer: Mastech

Absolute pressure meters

#04028Net Price:

39,00 EURUnit: pcs

V&A VA8070 - Absolute pressure meterMeasures absolutte pressure in 300 - 1200 hPa range.Delivered in hard case with a cover.

Measurement range: 300 ÷ 1200 hPaResolution: 0,1 hPaData hold: yes Max/min: yesBacklight: yesAuto power off: yesPower: 3x 1,5V AAAManufacturer: V&A

Automotive multimeters

#07534Net Price:

26,20 EURUnit: pcs

E-Sun EM288 - Automotive multitesterThe automotive multitester conviniently measures carelectrics. It has an inbuilt magnet thanks to which it can beplaced on the car body during measurements.

The device enables:- battery voltage measurement,- checking the lights,- checking fuses,- flashlight function

DC voltage measurement: 9 ÷ 35VPower supply: directly from the 12V battery (crocodile clips orconnection to the cigarette lighter socket)

Calibrators

#06244Net Price:


FLUKE 715 - (V/mA) CalibratorEnables measuring signals in a current loop and outputvoltage signals from programmable controllers (PLC),transmitters.

DC current: 0-24 mA +/- (0,015%+2),DC voltage: 0-20V +/- 0,01%+2),Voltage source: 0-100mV and 0-10VLoop power supply during mA measurement: 24VDimensions: 201 x 98 x 52 mmPower: 9V batteryWeight: 0,6kgManufacturer: Fluke







#06491Net Price:


FLUKE 725 - Temperature CalibratorThe FLUKE 725 Temperature Calibrator enables testing andcalibration of almost any temperature gauge.

The set includes a calibrator, TL75 test leads, AC72measuring grippers and a pair of test leads with double-sidedplugs for "tower" connection.

MeasurementsVoltage: 0..30V +/- (0,02% + 2 cyfry)Current: 0..24mA +/- (0,02% + 2 cyfry)Resistance: 0..3200ΩThermocouples: J/K/T/E/L/N/U/B/R/SRTD: Ni120 (672), Pt100/200/500/1000 (385), Pt100 (3916),Pt100(3926)SourceVoltage: 0..10V, max obciążenie 1mAVoltage mV: -10.00..+75.00 mVResistance: 15..3200ΩThermocouples: J/K/T/E/L/N/U/B/R/SRTD: Ni120 (672), Pt100/200/500/1000 (385), Pt100 (3916),Pt100(3926)OtherDimmensions: 200 x 96 x 47 mmPower: 6x bateria 1,5V AA (R6)Weight: 0,65kgManufacturer: Fluke

#06344Net Price:


FLUKE 789 - ProcessMeterThe FLUKE 789 ProcessMeter has all the functions of aprofessional multimeter and a loop calibrator. Thanks to theinbuilt loop supply, no additional voltage source is neededwhen checking relays. The device is made of very durablematerials.

MultimeterRange selection: automatic/manualDC voltage: 1000 V +/- 0,1% AC voltage: 1000 V +/- 0,5%DC current: 30mA +/- 0,05%AC current: 30mA +/- 0,05%Resistance: 40 MΩ +/- 0,2%Frequency: 200kHz +/- 0,005%Continuity test: yesRelative measurement: yesDiode test: yesTrue RMS: yesCalibratorCurrent source: 0-20 mA and 4-24 mA +/-0,05% of rangeLoop supply: 24VStep: auto / manualOtherPC Interface: yes (infrared)Dimensions: 203 x 100 x 50 mmPower: 4 x 1,5V AA batteryWeight: 0,6kgGuarantee: 3 lataManufacturer: Fluke

Scopemeters

#07536Net Price:

81,00 EURUnit: pcs

E-Sun EM116A - Scopemeter20MHz single channel oscilloscope (scopometer) with a TrueRMS multimeter function and the ability to connect to acomputer via USB port.

Bandwidth: 20MHzMax. real time sampling rate: 80 MS/sInput impedance: 1MΩ, <20pFInput sensitivity: 5mV to 5V/divTimebase range: 50ns to 5s/divDigital multimeter: 4000 digitsDisplay: LCD color, 320x240Memory: 6 groups of waveforms + 1 setup

#07537Net Price:

160,00 EURUnit: pcs

E-Sun EM122 - Scopemeter 2CHDual channel 20MHz oscilloscope with the True RMSmultimeter function and the ability to connect to a computervia USB port.

Bandwidth: 20MHz, 2CHMax. real time sampling rate: 80 MS/sInput impedance: 1MΩ, <20pFInput sensitivity: 5mV to 5V/divTimebase range: 50ns to 5s/divDigital multimeter: 4000 digitsDisplay: LCD color, 320x240Memory: 6 groups of waveforms + 1 setup

#06397Net Price:


FLUKE 125 - ScopometerThe Fluke 120 Series Scopometers are durable devices forindustrial use.

The kit includes a Fluke 125 ScopeMeter, a mains charger, aset of test leads, a carrying case and an i400s current clamp.

Bandwidth: 40MHzMax. real time sampling rate: 25 MS/sInput sensitivity: 5mV to 500V/divTimebase range: 10ns to 1min/divOutput: 2Digital multimeter: 5000 digits, TrueRMSScope measurements: 26 automatic, cursorsDisplay: LCD blac-whiteMemory: 20Battery power: 7 hoursDimmensions: 232 x 115 x 50 mmWeight: 1.2kg

Other multimeters &accessories


"K" type temperature probeK type temperature probe designed to work with digitalmultimeters with the option of measuring externaltemperature in the range of - 50° up to 250°C.

#06474Net Price:

136,00 EURUnit: pcs

Fluke 80PK-25 Piercing ProbeSharp, "K" type thermocouple suitable for the food industry,liquids and gels.

Measurement range: -40..350°CLength: 102mmManufacturer: Fluke

#06915Net Price:

410,00 EURUnit: pcs

Fluke 80PK-27 Industrial Surface ProbeK type thermocouple for surface work and hard conditions.

Measurement range: -127 ÷ 600°CSensor type: beltManufacturer: Fluke

#06762Net Price:

115,00 EURUnit: pcs

Immersion Probe Fluke 80PK-22Immersion thermocouple for liquids and gels.

Measurement range: -40..1090°CLength: 213mmManufacturer: Fluke












#04092Net Price:

51,40 EURUnit: pcs

Mastech MS5908C - Circuit analyzerEasy to use, inexpensive circuit analyzer, a special testdevice designed for fast analysis of the condition of AC plugsockets and quick fault location. Thanks to its simpleoperation, measurement accuracy and other functions, it candetect many installation problems causing the risk of fire orelectric shock.

Line Voltage: 85 ÷ 265 V +/-1.0%Peak Line Voltage: 120 ÷ 375 V +/- 1.0%Impedance: 0 ÷ 3 Ω +/- 2.5%RCD test: Trip time - 1 ÷ 6500 ms +/- 1.0%, Trip current -30mA +/- 1.0%Line frequency: 45 ÷ 65 HzVoltage drop [%]: 0,1 ÷ 99% +/- 2,5%, Load current - 5/8/10 A


T3000 - Test lead set, banana type, angledHigh quality, original Mastech test leads compatible with mostof meters in our offer:

- Multimeter M9912 - Multimeter MS5201- Multimeter MS2201- Multimeter MS2203- Multimeter MS6230- Multimeter series MY60 - Multimeter series M92 - Multimeter series MS8200- Multimeter series MS8205- Multimeter series M9805 - Multimeter series MS8222- Multimeter series MS8201 - Multimeter series M266 (#02902)- Multimeter series MS2000 - Multimeter series MS2001 - Multimeter series M89


V&A VA3010 - Sweezer for SMDA practical Sweezer enabling quick and convenientone-handed measurement of passive elements made intraditional and SMD technology.





Index

Air quality meters .......................................................................................................................................................................................................... 1

Digital multimeters ........................................................................................................................................................................................................ 1

Clamp multimeters ........................................................................................................................................................................................................ 6

Multimeter kits ............................................................................................................................................................................................................... 7

Voltage testers .............................................................................................................................................................................................................. 7

Cable trackers ............................................................................................................................................................................................................... 8

Cable locators and detectors ........................................................................................................................................................................................ 9

Temperature & humidity meters .................................................................................................................................................................................. 10

Pirometers ................................................................................................................................................................................................................... 10

Thermal imagers ......................................................................................................................................................................................................... 11

Distance meters .......................................................................................................................................................................................................... 12

Anemometers .............................................................................................................................................................................................................. 13

Absolute pressure meters ........................................................................................................................................................................................... 13

Automotive multimeters .............................................................................................................................................................................................. 13

Calibrators ................................................................................................................................................................................................................... 13

Scopemeters ............................................................................................................................................................................................................... 14

Other multimeters &accessories ................................................................................................................................................................................. 14


Measuring Instruments - Atel

Documents

Transcript of Measuring Instruments - Atel