MEASUREMENT AND CONTROL LINE

...............................................................................................................................................

LINEME A SUREMEN T A ND CON T ROL

Integral Energy Management System

→ circutor.com

2 | Circutor. The Future is Efficiency

EMSiIntegral Energy Management System

It has never been easier: Continuous management, maintenance and integrated control

The Line system devices are designed to monitor and control different types of installations, both those where the energy consumption has to be managed and those where the devices installed in the network have to be controlled.

Its modular architecture offers a solution that can be fully adapted to any type of need by connecting different modules through its internal Bus-Line communications system.

The result is the ability to create a compact and custom device that can adapt to any requirement, present or future.

The new Line system lets you monitor and record any value you wish to manage (electricity, water, gas consumption, temperatures, flow rates, pressures, etc.) and control any system integrated into the installation (lighting, HVAC, pumps, etc.).

Circutor. The Future is Efficiency | 3

Bus-Line

Line-EDS Line-M-4IO

Line-M-3G Line-M-EXT-PS

Line-CVM Line-M-20I

Line-TCPRS1

Complete modular system for energy management

Line Series

–Line-EDS-CloudLine-EDS-PSLine-EDS-PSSLine-EDS-PSS-PRO

–Line-M-4IO-TLine-M-4IO-RLine-M-4IO-RVLine-M-4IO-A

–Line-CVM-D32

–Line-M-20I

Datalogger with built-in webserver

Input/output modules

Modem for 3G communications

Power supply

Power analyzer Module with 20 digital inputs

RS-232/RS-485 to Ethernet and Wi-Fi converter

It has never been easier.Total flexibility for any installation The modular design of the

system allows any associated Line device to be installed quickly, securely and automatically thanks to its integrated Bus-Line communications.

The Line devices which are part of the integral Energy Management System (EMSi) offers multiple combinations, allowing you to create a solution custom-made for each installation.


Line-EDS-Cloud

Line-EDS-PSLINE-EDS-PS / -PSS / -PSS-PRO

LINE-EDS-CLOUD

→

1 2

3 4

Monitoring system using Line-EDS-Cloud

Monitoring and control system using Line-EDS-PS

Monitoring and control system usingLine-EDS + PowerStudio

Monitoring and control system using PowerStudio

Can be used to send data directly to the cloud, registering and integrating them into the major Big Data platforms, so you can easily manage them using simple Dashboards, directly from the internet.

It allows to manage and register the information of a installation on a single device using an integrated web server, without the need to install a PC, as it incorporates the powerful energy management toolPowerStudio, by CIRCUTOR.

Cloud data monitoring

Data monitoring

Integrated control of installations

Maintenance

Two models, four types of management.Designed for complete control of installations.

T WO MODEL S F OUR T Y PE S OF M A N AGEMEN T

With the Line system devices, you decide how to manage any installation. Manage them using IoT cloud platforms or with our integral Energy Management System, working locally or remotely.


Line-EDS-Cloud

Line-EDS-Cloud

3G

WWW

1

Cloud API platforms

On-line monitoring

Alarms

Data tables

Graphs

Generic Modbus driver

Monitoring system using Line-EDS-Cloud

TWO MODELS,FOUR MANAGEMENT TYPES

Azure platform AWS platform

Remotely monitor your installation using IoT platforms

Ethernetor Wi-Fi

... more LINE devices

Web platform

↘Examples of IoT platforms

Other devices using a generic Modbus driver

CIRCUTOR devices

↘System features:

› Compatible with the major IoT platforms for Big Data analysis. › Distributed system, allowing data from multiple installations to be

centralized in the same system. › Connect from anywhere with internet access. › Does not require installing and maintaining a local server. › No programming specialists required.

Ethernetor RS-485


WAN LAN

Line-EDS-PS

2

3G

PowerStudioEmbedded

Line-EDS-PS

Line-EDS-PSS

Line-EDS-PSS-PRO

Line-EDS-PS

Line-EDS-PSS

Line-EDS-PSS-PRO

Monitoring and control system using Line-EDS-PS

↘System features:

› Line-EDS-PS incorporates EMSi software for the integral management of installations. › Access EMSi from any web browser, whether in local or remote mode. › Does not require installing and maintaining a local server. › Generic Modbus driver to add any device on the market. › Internal memory for data analysis and traceability using graphs and tables. › Energy consumption management. › Automatic control of installations. › Alarms and billing simulation for proper maintenance.

↘Accessible via Webserver or PowerStudio

↘

EMSi (Integral Energy Management System)Manage consumption Installation control Maintenance

* Available with Line-EDS-PSS and Line-EDS-PSS-PRO models

Access the EMSi software from anywhere and with any web browser

Ethernetor RS-485

CIRCUTOR devices

Ethernetor Wi-Fi


online monitoring

Alarms

SCADA screens*

Billing simulation*

Data tables

Graphs


Other devices using a generic Modbus driverGeneric Modbus

driver


2

All your consumption at a glanceRecord and manage the measurements of all your energy and consumption variables with the Line devices. Easily add any meter that uses the Modbus protocol. Use the Line-CVM-D32 power analyzer to record electricity consumption, and the Line-M input and output modules to record other consumption using pulses. Group consumption into different hourly rates, manage your installation as per the ISO 50001 standard and monitor all the information directly on a SCADA display.

Stay on top of everything that is happening in your installationWith Line-EDS-PSS and Line-EDS-PSS-Pro it is possible to program the automatic sending, via mail electronic, of invoice simulations, reports or alarms to be at all times informed of the behaviour of the facility.

Control and automate your installationLine-EDS-PS can integrate any Modbus RTU and/or Modbus TCP device, enabling both the reading and management of any device with this protocol (HVAC machines, variable speed and frequency drives, compressors, level pumps, etc.).


Line-EDS-PSS

PowerStudioEmbedded

PowerStudio

PowerStudio SERVER

WAN LAN

3

Line-EDS-PS

Line-EDS-PSS

Line-EDS-PSS-PRO

Ethernetor RS-485

CIRCUTOR devices


› Monitor variables in real time › Data base creation › Display the recorded data graphically and in tables › XML Server › Export data to .txt and .csv files

On-line monitoring

Alarms

SCADA screens*

Billing simulation*

* Available with Line-EDS-PSS and Line-EDS-PSS-PRO models

Data tables

Graphs

TWO MODELS,FOUR MANAGEMENT TYPES Monitoring and control system using

Line-EDS + PowerStudio

Access PowerStudio from anywhere, through your own server or using any web browser.

Efficiency combined with energy control. Three versions of the PowerStudioenergy management software .


more devices...

Generic Modbus driver

↘System features:

› Manage your installation from your own server (PowerStudio Server). › Add as many devices as you want with PowerStudio Server. › Access EMSi from any web browser, whether in local or remote mode. › Redundant database through the installation of Line-EDS-PS devices. › No limit on memory for data analysis and traceability using graphs and tables.

Features of the monitoring and control system using Line-EDS-PS

Ethernetor Wi-Fi


RS-232 RS-485

SERVERPowerStudio

PowerStudio SCADA PowerStudio SCADA Deluxe

PowerStudio PowerStudio SCADA

WAN LAN

-CVM

4

Line-CVM + Line-M

-4IO -4IO

-TCPRS1

CIRCUTOR devices


› SCADA screens › Reports, billing simulations and configurable alarms

› Generic Modbus driver › OPC Client

System monitoring and control using PowerStudio

On-line monitoring

Alarms

SCADA screens*

Billing simulation*

*Depending on version of PowerStudio

Data tables

Graphs


Create a custom solution with Line devices and manage it with PowerStudio Server.

Generic Modbus driver*

↘System features:

› Create your Line solution using as many devices as you need, and expand it at any time.

› Manage your installation from your own server (PowerStudio software). › Access EMSi from any web browser, whether in local or remote mode. › Add as many devices to your communications network as you want with PowerStudio. › No limit on memory for data analysis and traceability using graphs and tables.

Ethernetor Wi-Fi


PowerStudioEmbedded

Line-EDS-Cloud

Line-EDS-PS

3GEthernet

WIFI

Line-EDS

–Line-EDS-Cloud has been designed to read any type of data and automatically upload it to the major Big Data platforms.

The device features Wi-Fi communications for simple set-up and start-up. It has Ethernet and RS-485 ports for reading and setting up any device connected to it.

- Line-EDS-PS/-PSS/-PSS-PRO incorporates all the features of a powerful data monitoring, control and data acquisition software (SCADA) into a single device.

Monitor your installation using Wi-Fi, Ethernet or 3G communications locally or remotely. Every model has a generic Modbus driver for integration with any product on the market.

Datalogger with integrated webserver

Add new devices whenever you need more features

Communication between devices via

Bus-Line

BUS-L INE , W I T HOU T C A BL E S

Line system devices.It has never been easier.

The modular design of the Line solution allows any Line device to be installed quickly, securely and automatically thanks to its integrated Bus-Line communications. No additional set-up is required.

The system is fully expandable, allowing for Plug & Play connections of the various modules;digital or analogue inputs/outputs, power analyzers, datalogger with web server and Ethernet/Wi-Fi or 3G communications.

Cloud API platforms


MODUL E S

K E Y F E AT URE S

Type Code Integrated software TR out-puts

Generic Modbus Communications Protocol

Line-EDS-Cloud [*] M61055. APIs from Azure, AWS, GOOGLE, Cloud API platforms 2 ● Ethernet / Wi-Fi / RS-485 / Bus-Line Web platform Modbus/APIs

Line-EDS-PS [*] M61095. PowerStudio 2 ● Ethernet/Wi-Fi/RS-485/Bus-Line CIRCUTOR + Generic/XML Modbus

Line-EDS-PSS [*] M61085. PowerStudio SCADA 2 ● Ethernet/Wi-Fi/RS-485/Bus-Line CIRCUTOR + Generic/XML Modbus

Line-EDS-PSS-PRO [*] M61065. PowerStudio SCADA PRO 2 ● Ethernet / Wi-Fi / RS-485 / Bus-Line CIRCUTOR + Generic/XML Modbus

Bus-Line: RS-485 communications system, with side connector between modules

Table of references

Multiple options for communicating with the user

Easy communication with other devices

Data display and recording Control of installations

Features Line-EDS-PS Line-EDS-PSS Line-EDS-PSS-PRO

Customized SCADA screens - 2 5

Customized reports/billling simulation - 2 5

Event scheduling 10 20 40

Programming of calculated variables 10 20 40

CIRCUTOR or Generic Modbus RTU and TCP slave devices 5 10 20

Comparison between Line-EDS-PS devices

Ethernet (Webserver)

Wi-Fi

3G (optional)

PowerStudio Embedded

Alarms

Cloud2 transistor outputs

Memory (up to 1 year of data)

SCADA displays

Bus-Line

RS-485Modbus RTU

Ethernet Modbus TCP

Modbus generic driver


Line-CVM Line-M-4IO

- Line-CVM-D32 Power analyzer to monitor and measure more than 250 electric variables in both medium- and low-voltage networks. Designed to properly manage the quality of consumption and supply, by reading harmonics and recording the number of power quality events counter (swells, dips and interruptions) that occur in the installation.

Key features:

Three-phase, indirect power analyzer Input/output modules

4 digital inputs and outputs–Line-M-4IO-T Module with 4 inputs and 4 transistor outputs (free of voltage).– Line-M-4IO-R Module with 4 inputs and 4 relay outputs.–Line-M-4IO-RV Module with 4 inputs (230 Vac) and 4 relay outputs.

4 analogue inputs and outputs– Line-M-4IO-A Module with 4 analogue inputs and 4 analogue outputs.Inputs for integrating 0/4... 20 mA signals from external sensors or devices. Programmable outputs from 0/4... 20 mA or 0/2... 10 V, replicating measured signals through their inputs or instantaneous variables measured by devices connected to the Line system.

Measurement of electrical variables

Power quality events counter (swells, dips and interruptions)

Measures up to the 40th harmonic

Energy cost measurement

Consumption and generation measurement (4 quadrants)

Sealable

RS-485 port (Modbus RTU) for reading and configuration

Two digital outputs to generate impulses or alarms

Measurement of CO2 emissions

Record of operating hours for preventive maintenance

Terminals with Plug&ON system

For connecting to line-EDS or Line-CVM-D32 devices.

Water, energy, gas, thermal energy and other meters.

Temperature (°C), Flow rate (m³), Pressure (kPa), Level (l)

Monitor status of sensors and protection devices (On/Off)

Tariff change

Alarms (instantaneous values)

Values of analogue inputs

Pulses from incremental variables (energies, costs, CO2 emissions or working time).*

Instantaneous electrical variables: Voltage, Current, Power, etc.

*Only for the Line-M-4IO-T model

INPUTS

INPUTS

OUTPUTS

OUTPUTS

Line System devices.It has never been easier.


RS-232/RS-485

Bus-Line-TCPRS1

-20I -20I

-20I

-TCPRS1 -TCPRS1 -CVM

-EDS-PS

EthernetWi-Fi

EthernetWi-Fi

EthernetWi-Fi

EthernetWi-Fi

-CVM -4IO -4IO

Line-M-20 IModule with 20 digital inputs

Module with 20 digital inputs to read consumption using pulses from any type of meter (electricity, water, gas, etc.) or to detect the status (ON/OFF) of any device or sensor associated with a control system (people, units, protection, actuation, alarms, etc.).

Line-M-20I features versatile communications, and can be connected directly via the Line-TCPRS1 or Line-EDS module.

Communication options

- TCPRS1 -M-20I

-EDS-PS -M-20I

- TCPRS1 -CVM-D32 -M-20I1

3

2

Line-TCPRS1RS-232/RS-485 to Ethernet/Wi-Fi converter

Communications gateway designed to convert an RS-232/RS-485 physical environment to Ethernet and/or Wi-Fi in order to connect to Line-CVM and Line-M expansion modules. Allows using a single IP to connect to and configure all the devices connected to the RS-485 or Bus-Line communications bus.

MODUL E S

Configurable communications via bluetooth thanks to the free MyConfig app.


WAN

Line-M-3G

3G

Line-M-EXT-PS

-D32 -4IO -4IO

Line-M-EXT-PSLine-M-3GPower supply up to 480VModem for 3G communications

Module to provide 3G communications to the line-EDS unit and to the devices connected to it. Allows remote access from anywhere without the need for communications wiring.

This module allows the system to be expanded by connecting more devices on the Bus-Line, without the need for external power in the remaining modules. The system can thus be extended as the needs of the installation grow. It also makes it possible to install Line devices on networks of up to 480V.

Install one Line-M-PS device every 3 modules of the Line series, or check with CIRCUTOR for your specific installation.

▻ More LINE devices

Line System devices.It has never been easier.


MODUL E S

Type Code Measurement channels Input current TR outputs Communications Protocol Harmonics

Line-CVM-D32 M58100. 3 .../5A, .../1A or .../0.250 A 2 RS-485/Bus-Line Modbus/RTU 40


Power analyzer

TA BL E OF REF ERENCE S

Type Code TR outputs RL outputs Digital inputs Analogue inputs Analogue outputs Communications Protocol

Line-M-4IO-T M58E01. 4 - 4 - - Bus-Line Modbus/RTU

Line-M-4IO-R M58E02. - 4 4 - - Bus-Line Modbus/RTU

Line-M-4IO-A M58E03. - - - 4: (0/4 … 20mA) 4: (0/4 … 20 mA), (0/2 … 10 Vdc) Bus-Line Modbus/RTU

Line-M-4IO-RV M58E04. - 4 4 (230 V) - - Bus-Line Modbus/RTU

Line-M-20I M58E06. - - 20 - - Bus-Line Modbus/RTU


Inputs/Outputs

Communications

Type Code Description

Line-M-3G M58E05. 3G communications modem and Bus-Line to communicate with the Line system's devices

Line-TCPRS1 M62411. RS-232/RS-485 (Modbus RTU) to Ethernet or Wi-Fi (Modbus TCP) converter


Accessories

Type Code Description

Line-M-EXT-PS M58E0A. 110-277 V ~ (P-N)/110-480 V ~ (P-P) power supply to drive devices connected to the Bus-Line.



↘Control and manage your installation

The devices in the Line system paved the way for the EMSi concept, which combines the management of different types of energy consumption and the management of multiple control and maintenance systems (lighting, HVAC, etc.) into a single solution.

ENERGY MANAGEMENT

Electricity consumption

Water consumption

Gas consumption

Thermal consumption

Fuel consumption

CO2 emissions

...

INSTALLATION CONTROL

Lighting control

Heating control

Air conditioning control

Control of water pumps

Temperature control

...

MAINTENANCE

Alarms and event monitoring

Energy and key process indicators

Billing simulations

SCADA screens

Production costs

...

ntegrated Energy Management System


kWh

m3

kWh

......

kvarh

kWh

l

EthernetRS-485

Line-EDS Line-CVM Line-M-4IO

The EMSi software integrated into line-EDS lets you create SCADA displays to show, in real time, where, how, when and how much energy your installation is consuming. This information lets you save on costs and manage the installation globally based on the ISO 50001 standard.

↑ Find out how and where you consume energy.

← Monitor every circuit in your installation

The EMSi system records all the information on your installation's energy consumption, which it can monitor in real time, display it on graphs, compare data from different periods or display it in data tables so it can be exported outside the application.

The data acquisition is very simple; using the line-EDS device, you can add any meter with Modbus communications to the EMSi system; the Line-M devices with digital inputs let you record consumption using any meter with a pulse output. The electricity consumption is re-corded using the Line-CVM-D32 analyzer.

↘Management of all your consumption

CIRCUTOR devicesOther devices using

generic Modbus driver

Electricity meter Consumption meters

with pulse outputs

Active Energy Consumption

Water Consumption

Thermal Consumption

Reactive Energy Consumption

Gas Consumption

Fuel consumption


Line-EDS-PS

Note: The sample screens shown are not set up by default on Line-EDS devices. Each user will be able to generate their own screens based on their needs.

Example of lighting control

Example of HVAC control

Example of temperature control

↘Monitor any type of installation

Install Line-EDS and integrate any Modbus RTU or Modbus TCP device that is present in your installation (temperature, humidity, pressure, level or other kind of probe).

Create SCADA screens to control all your automation systems from a single device (Line-EDS). You can use any web browser or PowerStudio Server to control and display the status of your installation in real time, change any setpoint and receive alarms to improve the management of all your control systems.

Easily and dynamically display any regulation system required, such as:

Lighting controlConfigure setpoints to automatically turn lights on and off, on a set schedule or by using the astronomical clock feature. It also offers the option to control lighting systems by creating a work schedule, with or without inputs from motion sensors.

HVAC controlTake external temperature readings, compare them with the setpoint and turn on the HVAC system to drive and monitor the hot water loop. Monitor the condition of the compressors to display the percent load on each and verify they are working correctly.

Temperature control Check the status of each HVAC unit and adjust the hot/cold setpoints as needed. Create calendars or schedules to program automatic on/off switching times. Each device can be set based on the schedule or workday, with the option to incorporate motion sensors into the control system.


↘Maintenance of any installation

Program any type of alarm to monitor the installation depending on the variables of the con-nected devices. If any parameter is outside its programmed values, the system will adjust the installation and/or send an e-mail instantly.

It combines every aspect of energy control into a single tool, providing invoice simulations based on the energy consumption of any meter.

Know what the utility will bill in advance and schedule an automatic notification to compare and improve the efficiency of your consumption.

Create Energy Performance Indicators (EnPI) to chack if energy improvement actions are work-ing correctly. Create your own KPI, depending on your installation and processes.

Typical performance indicators:

Industry

HVAC

Water treatment or pumping stations

Buildings or Supermarkets

Hotels

kWh/unit produced

kWh/m2

kWh/occupation

kWh/external temp.

kWh/m3

Vial Sant Jordi, s/n08232 ViladecavallsBarcelona (Spain)T +34. 93 745 29 [email protected] CIRCUTOR, SA reserves the right to modify any information contained in this catalogue.

C2M6C3-01

MEASUREMENT AND CONTROL LINE

Documents

Transcript of MEASUREMENT AND CONTROL LINE