PRODUCT SPECIFICATIONS

PRODUCT CAPABILITIES

The MDVR-9704 provides the perfect surveillance solution for vehicles (Mobile Applications). This equipment has H.264 Technology for video compression and a Stand Alone Non-PC based Real time operating system that provides maximum stability (flexible installation). Its construction features a special anti-vibration and anti-vandalism system.

The MDVR-9704 offers connection to 3G/GPS/ EDGE/WI-FI systems allowing the track of the vehicle location, recording the video with a special position and real time viewing. With the optional alarm module, G-Shock sensors and alarm inputs can be connected to the unit to enact alarm video uploads and recording to the CMS.

Handheld Infra-Red controller with OSD for quick access to recorded video and settings menu. PC-Based Client software for live viewing, playback video, playback events associated video, and download capabilities. Support CMS (Central Management System) for remote monitoring by GPRS/EDGE/3G and WIFI, PAS (Playback Analysis Software) for video playback, meta-data analysis.

CMS Software: Speed Monitor Location Tracking Vehicle Status Monitor AVI Conversion Alarm Video Report Remote Live View/ Playback/ File Download/ Upgrade GeoFence

MDVR-9704 4CH MOBILE DIGITAL VIDEO RECORDER

PRODUCT FEATURES

Total resources: 4 channels D1 at realtime(100fps/ 120fps)

Built-in GPS for location tracking Built-in 3G for live view and remote management Internal WIFI 802.11N supported for all the regular video files and alarm files download

H.264 video compression Patented FS 3.0 file system for data reliability and data

recovery Supports 32GB/64GB SD card recording Built-in capacitor provides MDVR with enough time to pack

the files to avoid any video files loss when the externalpower is cut off suddenly

Pre-recording maximum 60 minutes

OS Embedded real time Linux Control Mode IR remote control, control panel, network

Video Input Video Output Video system Audio Input Audio Output

Display Split 1/4

OSD GPS information, alarm, temperature, acceleration, voltage, firmware version, MCU version, device information

Operation Interface Semi-transparent GUI

Video/Audio Compression

Image Resolution

Image Quality

Recording Mode

File Packing Time Pre-recording Post-recording Mirror Recording

H.264/ADPCM NTSC: D1 (704 X 480) HD1 (704 x 240), CIF (352 x 240) PAL: D1 (704 X 576) HD1 (704 x 288), CIF (352 x 288) 1-8 levels adjustable (1 is the best) General/schedule/alarm (sensor trigger, speed, acceleration, video loss, temperature) 15 minutes Maximum 60 minutes Maximum 30 minutes No

SYSTEM

VIDEO AND AUDIO

DISPLAY

RECORDING

TECHNICAL SPECIFICATIONS

Playback Channel General/schedule/alarm(sensor trigger, speed, acceleration, video loss, temperature)

Search Mode Backup Mode

Date/time, channel, file type USB, network

PLAYBACK & BACKUP

Ethernet RJ45 port (10/100M) 3G HSPA/EVDO (optional) WIFI 802.11 B/G/N (optional) GPS GPS location tracking, speed detection and sync time

NETWORK

SD Card 32 GB/64 GB class 10 SDHC card STORAGE

USB USB 2.0 x 1 RS485 RS485 x 1 Sensor 8 inputs, 2 outputs UPS Uninterrupted power supply for MDVR

INTERFACE

Input Output Consumption

8-36V 12V@2A, 5V@1A 12W (without cameras and any accessories)

POWER

Dimension (L x W x H) 174mm x 159mm x 54mm Weight 1.8kg Hardware

CE Yes FCC Yes CERTIFICATIONS

Operating Temperature -25°C —+ 55°C ( please use built-in heater if the temperature is below 0°C )

Operating Relative Humidity 10%-90% ENVIRONMENTAL

H.264 Dual Streaming 3G WIFI GPS Vibration

Absorber Vertical

Installation Heater

BC-11/21/2013 - *Specifications subject to change without notice

XTS Corp. Headquarters 8880 N.W 18th Terrace, Doral, FL 33172 P: 305.863.7779 F: 305.863.7478 TF: 1.855.797.8XTS www.xtscorp.com ©2013 XTS CORP All Rights Reserved

4 channels (DIN-JACK x 4) 1 channel (DIN-JACK or RCA) NTSC/PAL 4 channels (DIN-JACK x4) Note (The Frame rate setup must be above 6 FPS)1 channel (DIN-JACK or RCA)