MDCC Status Thermax Compare

of 35

a) A.1.3 I pnding due to inspection by NTPC

b) A.1.4 I

c) A.1.5 I 8

2 A.1.6 DOSING PUMP - PT PLANT

a) A.1.7 II

b) A.1.8 II

3 A.1.9 HRSCC - PT PLANT

a) A.1.10 I INSPECTION COMPLETED

4 A.1.11 MIXER - PT PLANT

a) A.1.12 III 31/03/10

b) A.1.13 III 31/03/10

c) A.1.14 III 31/03/10

d) A.1.15 III 31/03/10

e) A.1.16 III 31/03/10

B) A.1.17 BOUGHT OUT AND FABRCATED ITEMS

1 A.1.18 PRE FABRICATED PIPE

A.1.19 PUDDLE PIPES

A.1.20

a) A.1.21 SIZE : 32 NB III 13/02/10

b) A.1.22 SIZE : 40 NB III 13/02/10

c) A.1.23 SIZE : 50 NB III 13/02/10

A.1.24 CARBON STEEL

a) A.1.25 SIZE : 25 NB III 12/11/2010

b) A.1.26 SIZE : 50 NB III 12/11/2010

c) A.1.27 SIZE : 80 NB III 12/11/2010

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% Ni CI IS 210 FG 260,SERVICE-LIME SLURRY TRANSFER PUMP,AS PER DOC.NO:WHMHA00145

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% Ni CI IS 210 FG 260,SERVICE-LIME DOSING PUMP,AS PER DOC.NO:WHMHA00146

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-CI,SERVICE-FLUSHING PUMP,AS PER DOC.NO:WHMHA00147

FeCl3 DOSING PUMP AS PER DOC.NO:WHMHK00084

INSPECTION CALL TO BE RAISED

PE DOSING PUMP AS PER DOC.NO:WHMHK00085


HRSCC MECHANISM; AS PER DOCUMENT NO;WHMVC00003

MIXER,MOC:CARBON STEEL(LINED); WITH EBONITE LINING, AS PER DOCUMENT/DRAWING NO; FLASH MIXERMIXER,MOC:CARBON STEEL(LINED); WITH EBONITE LINING,AS PER DOCUMENT/DRAWING NO; FECL3

MIXER FOR LIME SLAKING TANK,MOC:SS316; AS PER DOCUMENT/DRAWING NO;

MIXER FOR LIME DOSING TANK,MOC:SS316; AS PER DOCUMENT/DRAWING NO;

MIXER FOR PE DOSING TANK,MOC:SS316; AS PER DOCUMENT/DRAWING NO;

CARBON STEEL WITH RUBBER LINE PUDDLE PIPES

of 35

d) A.1.28 SIZE : 100 NB III 12/11/2010

e) A.1.29 SIZE : 200 NB III 12/11/2010

f) A.1.30 SIZE : 300 NB III 12/11/2010

g) A.1.31 SIZE : 700 NB III 12/11/2010

h) A.1.32 SIZE : 800 NB III 12/11/2010

2 A.1.33 I

3 A.1.34 ISOLATION GATES

a) A.1.35 I UNDER MANUFACTURING

c) A.1.36 HRSCC-I/II (GT-1070/80) I UNDER MANUFACTURING

d) A.1.37 HRSCC-III (GT-1090) I UNDER MANUFACTURING

e) A.1.38 BYPASS CHANNEL ISOLATION GATE ( GT-1010) I UNDER MANUFACTURING

4 A.1.39 MS PIPING FOR PT PLANT

a) A.1.40 III TO BE APPLIED BY THERMAX

b) A.1.41 III TO BE APPLIED BY THERMAX

d) A.1.42 III TO BE APPLIED BY THERMAX

e) A.1.43 III TO BE APPLIED BY THERMAX

f) A.1.44 III TO BE APPLIED BY THERMAX

g) A.1.45 III TO BE APPLIED BY THERMAX

h) A.1.46 III TO BE APPLIED BY THERMAX

i) A.1.47 III TO BE APPLIED BY THERMAX

j) A.1.48 III TO BE APPLIED BY THERMAX

k) A.1.49 III TO BE APPLIED BY THERMAX

5 A.1.50 SS304 PIPING FOR PT PLANT

a) A.1.51 II INSPECTION COMPLETED

b) A.1.52 II INSPECTION COMPLETED

c) A.1.53 II INSPECTION COMPLETED

POLYELECTROLYTE TANK; FABRICATION, R/LINING & PAINTING OF 2200 DIAMETER, AS PER DRG;

INSPECTION COMPLETD BY NTPC

STILLING CHANBER OUTLET GATE (GT-1020/1030/1040)

15NB, PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK;

25NB PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK;





300NB PIPE,CARBON STEEL,ERW; IS:3589 GR 410,LATEST EDN,6.35 MM NOM.THK;



800NB PIPE,CARBON STEEL,ERW; IS:3589 GR 410,LATEST EDN,7.14 MM NOM.THK

25NB;PIPE,SS304,ERW; SA 312 TP304,LATEST EDN,ANSI B36.19,SCH 40S

40NB ;PIPE,SS304,ERW; SA 312 TP304,LATEST EDN,ANSI B36.19,SCH 40S;

50NB;PIPE,SS304,ERW; SA 312 TP304,LATEST EDN,ANSI B36.19,SCH 40S;

of 35

d) A.1.54 II INSPECTION COMPLETED

e) A.1.55 II INSPECTION COMPLETED

6 A.1.56 PVC PIPING FOR PT PLANT

a) A.1.57 III 31/03/10

b) A.1.58 III 31/03/10

c) A.1.59 III 31/03/10

d) A.1.60 III 31/03/10

e) A.1.61 III 31/03/10

f) A.1.62 III 31/03/10

g) A.1.63 III 3/31/2010

h) A.1.64 III 3/31/2010

7 A.1.65 MS FITTINGS

a) A.1.66 III 31/03/10

b) A.1.67 III 31/03/10

c) A.1.68 III TO BE APPLIED BY THERMAX

d) A.1.69 III TO BE APPLIED BY THERMAX

e) A.1.70 III 31/03/10

f) A.1.71 III 31/03/10

g) A.1.72 III TO BE APPLIED BY THERMAX

h) A.1.73 III TO BE APPLIED BY THERMAX

i) A.1.74 III TO BE APPLIED BY THERMAX

j) A.1.75 III TO BE APPLIED BY THERMAX

k) A.1.76 III 13/03/2010

l) A.1.77 III 13/03/2010

m) A.1.78 III 13/03/2010



OD 20;PIPE,PVC,IS:4985,AS PER LATEST EDITION, CLASS 4,





OD 63;PIPE,PVC,IS:4985,AS PER LATEST EDITION, CLASS 4



FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF, PLATE TYPE; 15 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 25 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 40 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 50 NB

FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 80 NB

FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 100NB

FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 300 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 350 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.47 150#,SERIES B,FF; 700NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.47 150#,SERIES B,FF; 800NBELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;25NBELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;40NBELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NB

of 35

n) A.1.79 III 13/03/2010

o) A.1.80 III 13/03/2010

p) A.1.81 III 13/03/2010

q) A.1.82 III 13/03/2010

8 A.1.83 PVC FITTINGS

a) A.1.84 III 31/03/10

b) A.1.85 III 31/03/10

c) A.1.86 III 31/03/10

d) A.1.87 III 31/03/10

e) A.1.88 III 31/03/10

f) A.1.89 III 31/03/10

g) A.1.90 III 31/03/10

h) A.1.91 III 31/03/10

i) A.1.92 III 31/03/10

j) A.1.93 III 31/03/10

k) A.1.94 FLANGE,PVC,LJFF, ANSI B16.5,150#, 15NB III

l) A.1.95 FLANGE,PVC,LJFF, ANSI B16.5,150#,20NB III

m) A.1.96 FLANGE,PVC,LJFF, ANSI B16.5,150#,25NB III

n) A.1.97 FLANGE,PVC,LJFF, ANSI B16.5,150#,32NB III

o) A.1.98 FLANGE,PVC,LJFF, ANSI B16.5,150#,40NB III

p) A.1.99 FLANGE,PVC,LJFF, ANSI B16.5,150#,50NB III 31/03/10

q) A.1.100 FLANGE,PVC,LJFF, ANSI B16.5,150#,80NB III 31/03/10

r) A.1.101 III 31/03/10

s) A.1.102 III 31/03/10

t) A.1.103 III 31/03/10

u) A.1.104 III 31/03/10

ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;80NB

TEE EQUAL,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;80NB

ELBOW 45DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;80NBELBOW 45DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;100NB

ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 20ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 25ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 50ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 90ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 20TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 40TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 50

MATERIAL READY MDCC TO BE APPLIED





FLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,20ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,25ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,32ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,40OD

of 35

v) A.1.105 III 31/03/10

w) A.1.106 III 31/03/10

x) A.1.107 III 31/03/10

y) A.1.108 III 31/03/10

z) A.1.109 III 31/03/10

aa) A.1.110 III 31/03/10

bb) A.1.111 III 31/03/10

cc) A.1.112 III 31/03/10

dd) A.1.113 III 31/03/10

ee) A.1.114 III 31/03/10

ff) A.1.115 III 31/03/10

gg) A.1.116 III 31/03/10

hh) A.1.117 III 31/03/10

ii) A.1.118 III 31/03/10

jj) A.1.119 III 31/03/10

kk) A.1.120 III 31/03/10

ll) A.1.121 III 31/03/10

9 A.1.122 MANUAL VALVES

a) A.1.123 DIPHRAGM VALVES

ai) A.1.124 I

aii) A.1.125 I

aiii) A.1.126 I

aiv) A.1.127 I

av) A.1.128 I

avi) A.1.129 I

avii) A.1.130 I

FLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,50ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,63ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,90ODTEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 40X32TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 25X20TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32X20TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32X25TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110X50TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110X63TEE REDUCING,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110X90TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 25X20REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32X20REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32X25REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 40X32REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 90X50REDUCING BUSH,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 110X90

VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB0001,25NB;

INSPECTION COMPLETED IN MARCH







VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,25NB;




VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:PP,AS PER DOC. NO;WHMDC00027;15 NB


of 35

b) A.1.131 BUTTERFLY VALVES

bi) A.1.132 I

bii) A.1.133 I

c) A.1.134 GATE VALVES

ci) A.1.135 I

cii) A.1.136 I

d) A.1.137 UPVC BALL VALVE

di) A.1.138 III TO BE APPLIED BY THERMAX

dii) A.1.139 III TO BE APPLIED BY THERMAX

diii) A.1.140 III TO BE APPLIED BY THERMAX

e) A.1.141 PLUG VALVE

ei) A.1.142 III TO BE APPLIED BY THERMAX

eii) A.1.143 III TO BE APPLIED BY THERMAX

eiii) A.1.144 III TO BE APPLIED BY THERMAX

eiv) A.1.145 III TO BE APPLIED BY THERMAX

f) A.1.146 SWING CHECK VALVE

fi) A.1.147 I INSPECTION COMPLETED

fii) A.1.148 I INSPECTION COMPLETED

fiii) A.1.149 I INSPECTION COMPLETED

10 A.1.150 HOIST

a) A.1.151 II

b) A.1.152 II

11 A.1.153 WEIGHING MACHINE

a) A.1.154 III TO BE APPLIED BY THERMAX

b) A.1.155 III TO BE APPLIED BY THERMAX

C) A.1.156 ELECTRICAL ITEMS

VALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00012;SIZE 350 NB

DOCUMENT APPROVAL PENDING FROM BHEL

VALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00012;SIZE 800 NB


VALVE,GATE; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO; WHMDC00027; SIZE 100 NB


VALVE,GATE; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO; WHMDC00027; SIZE 300 NB,EXTENDED STEM


VALVE,BALL; SOLVENT CEMENT TRUE UNION END,BODY MOC:UPVC,AS PER DOCUMENT;15NB;WHMDL00043VALVE,BALL; SOLVENT CEMENT TRUE UNION END,BODY MOC:UPVC,AS PER DOCUMENT;20NB;WHMDL00043VALVE,BALL; SOLVENT CEMENT TRUE UNION END,BODY MOC:UPVC,AS PER DOCUMENT;25NB;WHMDL00043

VALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMDN00001;25NBVALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMDN00001;40NBVALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMDN00001;50NBVALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMDN00001;80NB

VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:WCB AS PER DOC. NO;WHMEF00003;40NBVALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMEF00004; 40NBVALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WHMEF00004; 80NB

1 TON CAPACITY CHAIN PULLY BLOCK WITH GEARED TROLLEY FOR CHEMICAL HOUSE WITH LIFT OF 13M AS PER DOC;

DOCUMENT PPROVAL FROM BHEL-NTPC

1 TON CHAIN PULLY BLOCK WITH GEARED TROLLEY FOR CHEMICAL HOUSE (GROUND FLOOR)


ELECTRICONIC TYPE PORTABLE WEIGHING SCALE-500 kg

ELECTRICONIC TYPE PORTABLE WEIGHING SCALE-2000 kg

of 35

1 A.1.157 MOTORS FOR PT PLANT

a) A.1.158 III 31/03/10

b) A.1.159 III 31/03/10

c) A.1.160 III 31/03/10

d) A.1.161 III 31/03/10

e) A.1.162 III 31/03/10

f) A.1.163 III 31/03/10

g) A.1.164 III 31/03/10

h) A.1.165 III 31/03/10

2 A.1.166 JUNCTION BOXES FOR PT PLANT

a) A.1.167 III

b) A.1.168 III

3 A.1.169 BATTERY CHARGER TO PT PLANT III

D) A.1.170 INSTRUMENTATION - PT PLANT

1 A.1.171 PRESSURE GUAGE

a) A.1.172 III

b) A.1.173 III

2 A.1.174 LEVEL GUAGE

a) A.1.175 III 31/03/10

b) A.1.176 III 31/03/10

3 A.1.177 LEVEL INDICATOR

a) A.1.178 III 31/03/10

b) A.1.179 III 31/03/10

c) A.1.180 III 31/03/10

4 A.1.181 LEVEL TRANSMITTER

a) A.1.182 II

2.2KW, 4POLE, B3 MOUNTING MOTOR AS PER DOC NO WHEDB00091

2.2KW, 4POLE, V1 MOUNTING MOTOR AS PER DOC NO WHEDB00091






3.7KW, 4POLE, B3 MOUNTING MOTOR VFD OPERATED AS PER DOC WHEDB00091

EQUIPT : JB BOX : WITH 36 NOS. TERMINALS AS PER DRG. NO.-WFJHF00024





PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 2.5 KG/CM2,AS PER DOC NO.WHJAA00066PR INSTR : PRESSURE GAUGE : BOURDON TYPE :RANGE 0 - 4 KG/CM2,AS PER DOC NO.WHJAA00066

LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C - C DISTANCE 1100 mm AS PER DOC NO.WHJCA00016LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C - C DISTANCE 1300 mm AS PER DOC NO.WHJCA00016

LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-601 AS PER DOC NO.WHJCB00007LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-602,LIB-603 AS PER DOC NO.WHJCB00007LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-604,LIB-605,LIB-606 AS PER DOC NO.WHJCB00007

LEVEL INSTR : LEVEL TRANSMITTER : ULTRASONIC TYPE :AS PER DOC NO.WHJCE00017

INSPECTION COMPLETED IN MAR

of 35

b) A.1.183 II

5 A.1.184 FLOW TRANSMITTER

a) A.1.185 II

b) A.1.186 II

6 A.1.187 DP TYPE FLOW TRANSMITTER

a) A.1.188 II

b) A.1.189 II

7 A.1.190 MOTORISED VALVES

a) A.1.191 I

8 A.1.192 PLC WITH PLC PANEL SYSTEM for PT PLANT I INSPECTION COMPLETED

LEVEL INSTR : LEVEL TRANSMITTER : DIFF PR TYPE :AS PER DOC NO.WHJCE00018


FLOW INSTR : FLOW TRANSMITTER : ULTRASONIC TYPE :FOR TAG NO.FT 503,FT 504,FT 505,AS PER DOC NO.WHJBE00006


FLOW INSTR : FLOW TRANSMITTER : ULTRASONIC TYPE :FOR TAG NO.FT 506,AS PER DOC NO.WHJBE006


FLOW INSTR : FLOW TRANSMITTER : DIFF PR TYPE :AS PER DOC NO.WHJBC00009


FLOW INSTR : ORIFICE PLATE :AS PER DOC NO.WHJBB00009


MOTORISED VALVE :FOR TAG NO.MV-1,MV-2.AS PER DOC NO.WHJGH00005

DOCUMENT APPROVAL PENDING FROM BHEL-NTPC

of 35

CW CW PLANT

A) B.1.1 ROTATING EQUIPMENTS

1 B.1.2 DOSING PUMP - CW PLANT

a) B.1.3 I

b) B.1.4 I

c) B.1.5 I

d) B.1.6 I

2 B.1.7

a) B.1.8 I

b) B.1.9 I

c) B.1.10 I

3 B.1.11 MIXER - CW & CLO2 PLANT

a) B.1.12 III 31/03/10

b) B.1.13 III 31/03/10

c) B.1.14 III 31/03/10

B) B.1.15 BOUGHT OUT AND FABRICATED ITEMS

a) B.1.16

ai) B.1.17 I

aii) B.1.18 I

aiii) B.1.19 I

aiv) B.1.20 I

av) B.1.21 I

b) B.1.22 MS PIPING

bi) B.1.23 III

bii) B.1.24 III

bii) B.1.25 III

CORROSION INHIBITOR INJECTION PUMP AS PER DOC.NO:WHMHK00080

SCALE INHIBITOR INJECTION PUMP AS PER DOCUMENT NO.WHMHK00081

BIOCIDE DOSING PUMP AS PER DOC.NO.WHMHK00083

H2SO4 DOSING PUMP AS PER DOCUMENT NO.WHMHK00082

HORIZONTAL CENTRIFUGAL PUMP - CW & CLO2

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-CI,SERVICE-ACID UNLOADING PUMP H2SO4,AS PER DOC.NO:WHMHA00144PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-PP,SERVICE-NaCLO2 UNLOADING PUMP,AS PER DOC.NO:WHMHC00021PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-PP,SERVICE-ACID UNLOADING PUMP,AS PER DOC.NO:WHMHC00022

MIXER FOR CORROSION NHIBITOR DOSING TANK,MOC:CARBON STEEL(LINED); WITH EBONITE LINING,AS PER DOCUMENT/DRAWING NO;MIXER,FOR SCALE INHIBITOR DOSING TANK MOC:SS316; AS PER DOCUMENT/DRAWING NO;MIXER FOR BIOCIDE DOSING TANK,MOC:SS316; AS PER DOCUMENT/DRAWING NO;

STORAGE TANK - HORIZONTAL FOR CW & CLO2 PLANT

H2SO4 STORAGE TANK; FABRICATION & EXTERNAL PAINTING OF 3200 DIAMETER, AS PER DRG;

I NSPECTION COMPLETED UNDER PAINTING

NaOCl2 STORAGE TANK; FABRICATION, R/LINING & PAINTING OF 2800 DIAMETER, AS PER DRG;

DRAWING APPROVAL PENDING FROM BHEL-NTPC

ACID STORAGE TANK - HCL; FABRICATION, R/LINING & PAINTING OF 2800 DIAMETER, AS PER DRG;

DRAWING APPROVAL PENDING FROM BHEL-NTPC

CORROSION INHIBITOR DOSING TANK; FABRICATION, R/LINING & PAINTING OF 1400 DIAMETER, AS PER DRG;


SCALE INHIBITOR DOSING TANK; FABRICATION, R/LINING & PAINTING OF 1400 DIAMETER, AS PER DRG;


25NB;PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK;



of 35

c) B.1.26 SS PIPING

ci) B.1.27 II

cii) B.1.28 II

d) B.1.29 PVC PIPING

di) B.1.30 III 31/03/10

dii) B.1.31 III 31/03/10

e) B.1.32 MS FITTINGS

ei) B.1.33 III TO BE APPLIED BY THERMAX

eii) B.1.34 III TO BE APPLIED BY THERMAX

eiii) B.1.35 III TO BE APPLIED BY THERMAX

eiv) B.1.36 III TO BE APPLIED BY THERMAX

ev) B.1.37 III TO BE APPLIED BY THERMAX

evi) B.1.38 III TO BE APPLIED BY THERMAX

eviii) B.1.39 III TO BE APPLIED BY THERMAX

eviii) B.1.40 III TO BE APPLIED BY THERMAX

eix) B.1.41 III 31/03/10

f) B.1.42 PVC FITTINGS

f i) B.1.43 III TO BE APPLIED BY THERMAX

f ii) B.1.44 III 31/03/10

f iii) B.1.45 III TO BE APPLIED BY THERMAX

f iv) B.1.46 FLANGE,PVC,LJFF, ANSI B16.5,150#,20NB III 31/03/10

f v) B.1.47 FLANGE,PVC,LJFF, ANSI B16.5,150#,32NB III 31/03/10

fvi) B.1.48 III 31/03/10

f vi) B.1.49 III 31/03/10

fvii) B.1.50 III 31/03/10

f viii) B.1.51 III TO BE APPLIED BY THERMAX

PIPE,SS304,ERW; SA 312 TP304,LATEST EDN,ANSI B36.19,SCH 40S;15NB


PIPE,SS304,ERW; SA 312 TP304,LATEST EDN,ANSI B36.19,SCH 40S;25NB


PIPE,PVC,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 20

PIPE,PVC,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32

ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;25NBELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NBELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;65NB




FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 25 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 50 NBFLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 65 NB

REDUCER CONCENTRIC,BUSH,PVC;IS:4985, CLASS 4;OD32 X OD20

FLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,20ODFLANGE ADAPTOR,PVC,SOLVENT CEMENT SOCKET END, FLAT FACE, IS:4985, CLASS 4,32OD

ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 20ELBOW 90DEG,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 20TEE EQUAL,PVC SOLVENT CEMENT SOCKET END,IS:4985,AS PER LATEST EDITION, CLASS 4, OD 32

of 35

g) B.1.52 MANUAL VALVES

i B.1.53 BALL VALVE

ia) B.1.54 I

ib) B.1.55 I

ii B.1.56 DIAPHRAGM VALVE

iia) B.1.57 I

iib) B.1.58 I

VALVE,BALL CHK; FLGD TO ANSI B16.5 150#,BODY MOC:DI PFA LINED,AS PER DOC.NO;WGMEK00001;SIZE 50 NBVALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:CF8M,AS PER DOC. NO;WGMDL00003;15 NB

VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,PTFE DIAPHRAGM,AS PER DOC. NO;WGMDB00004;25 NB


VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,PTFE DIAPHRAGM,AS PER DOC. NO;WGMDB00004;50NB


of 35

iic) B.1.59 I

iid) B.1.60 I

iie) B.1.61 I

iif) B.1.62 I

iii B.1.63 PP/UPVC BALL VALVE

iiia) B.1.64 III TO BE APPLIED BY THERMAX

iiib) B.1.65 III TO BE APPLIED BY THERMAX

iiic) B.1.66 III TO BE APPLIED BY THERMAX

C B.1.67 ELECTRICAL ITEMS

a B.1.68 MOTORS

ai) B.1.69 III TO BE APPLIED BY THERMAX

aii) B.1.70 III TO BE APPLIED BY THERMAX

aiii) B.1.71 III TO BE APPLIED BY THERMAX

aiv) B.1.72 III TO BE APPLIED BY THERMAX

b B.1.73 JUNCTION BOX

bi) B.1.74 III

bii) B.1.75 III

c B.1.76 UPS

ci) B.1.77 BATTERY CHARGER FOR CW PLANT I

D B.1.78 CONTROL AND INSTRUMENTATION

a B.1.79 PRESSURE GUAGE

ai) B.1.80 III TO BE APPLIED BY THERMAX

aii) B.1.81 III TO BE APPLIED BY THERMAX

aiii) B.1.82 III TO BE APPLIED BY THERMAX

b B.1.83 LEVEL GUAGE

bi) B.1.84 III 31/03/10

VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,PTFE DIAPHRAGM,AS PER DOC. NO;WGMDB00004;65NB








VALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:PP,AS PER DOC. NO;WGMDL00001;15NB

VALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:PP,AS PER DOC. NO;WGMDL00001;25 NB

VALVE,BALL; SOLVENT CEMENT END,BODY MOC:UPVC,AS PER DOC. NO;WGMDL00002;15NB






APPROVAL AWAITED FROM BHEL-NTPC




PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 2.5 KG/CM2,AS PER DOC NO.WHJAA00067PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 4 KG/CM2,AS PER DOC NO.WHJAA00067PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0 - 6 KG/CM2, ASPER DOC NO.WHJAA00067

LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C -C DISTANCE 1600 mm ,MOC -PP,AS PER DOC NO.WHJCA00017

of 35

bii) B.1.85 III 31/03/10

biii) B.1.86 III 31/03/10

c B.1.87 LEVEL SWITCH

ci) B.1.88 III 31/03/10

cii) B.1.89 III 31/03/10

d B.1.90 pH TRANSMITTER ANND SENSOR

di) B.1.91 III

dii) B.1.92 I

e) B.1.93 PLC SYSTEM

ei) B.1.94 I INSPECTION COMPLETED

f) B.1.95 CHEMICALS

fi) B.1.96 MAXTREAT – 350 C, III TO BE APPLIED BY THERMAX

fii) B.1.97 MAXTREAT-1000 III TO BE APPLIED BY THERMAX

fiii) B.1.98 MAXTREAT – CL 5 III TO BE APPLIED BY THERMAX

LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C -C DISTANCE 1600 mm ,AS PER DOC NO.WHJCA00017LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C -C DISTANCE 1000 mm ,AS PER DOC NO.WHJCA00017

LEVEL INSTR : LEVEL SWITCH : SIDE MOUNTED MAGNETIC FLOAT TYPE :AS PER DOC NO.WHJCD00023LEVEL INSTR : LEVEL SWITCH : SIDE MOUNTED MAGNETIC FLOAT TYPE :MOC PP,AS PER DOC NO.WHJCD00023

PH SENSOR :FOR TAG NO.AE - 801,AS PER DOC NO.WHJEB00010

PH TRANSMITTER :FOR TAG NO.AT - 801,AS PER DOC NO.WHJEB00010

PLC WITH PLC PANEL SYSTEM FOR CW PLANT

of 35

ETP EFFLUENT TREATMENT PLANT

A C.1.1 ROTATING EQUIPMENT

I C.1.2 HORIZONTAL CENTRIFUGAL PUMP - ETP

Ia) C.1.3 I INSPECTION COMPLETED

Ib) C.1.4 I INSPECTION COMPLETED

Ic) C.1.5 I INSPECTION COMPLETED

Id) C.1.6 I INSPECTION COMPLETED

Ie) C.1.7 I INSPECTION COMPLETED

If) C.1.8 I INSPECTION COMPLETED

Ig) C.1.9 I INSPECTION COMPLETED

II C.1.10 VERTICAL PUMP

II a) C.1.11 I INSPECTION COMPLETED

II b) C.1.12 I INSPECTION COMPLETED

II c) C.1.13 I INSPECTION COMPLETED

II d) C.1.14 I INSPECTION COMPLETED

II e) C.1.15 I INSPECTION COMPLETED

II f) C.1.16 I INSPECTION COMPLETED

II g) C.1.17 I INSPECTION COMPLETED

II h) C.1.18 I INSPECTION COMPLETED

II i) C.1.19 I INSPECTION COMPLETED

II j) C.1.20 I INSPECTION COMPLETED

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-TREATED EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00024 (P-3120 A/B/C)

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-WASTE WATER TRANSFER PUMP,AS PER DOC.NO:WHMHB00018 (P-3040A/B)

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-CENTRATE TRANSFER PUMP,AS PER DOC.NO:WHMHB00017(P-3190A/B)

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-TREATED EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHA00228 (P-

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-CI,SERVICE-LIME DOSING PUMP,AS PER DOC.NO:WHMHA00229(P-3300A/B)PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-CI,SERVICE-LIME DOSING PUMP,AS PER DOC.NO:WHMHA00230 (P-3270A/B)PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-LUBRICATION WATER ,AS PER DOC.NO:WHMHA00242(P-3240 A/B)

PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00036(P-3010 A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00035(P-3020A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-SSF BACKWASH,AS PER DOC.NO:WHMHB00034 (P-3030A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00033(P-3050A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00032(P-3060A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00031(P-3070A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00030(P-3080A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-RAW EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00029 (P-3090A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-ETP SLUDGE TRANSFER PUMP,AS PER DOC.NO:WHMHB00028(P-3130A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-CLARIFIER SLUDGE TRANSFER PUMP,AS PER DOC.NO:WHMHB00027 (P-3160A/B)

of 35

II k) C.1.21 I INSPECTION COMPLETED

II l) C.1.22 I INSPECTION COMPLETED

II m) C.1.23 I INSPECTION COMPLETED

II n) C.1.24 I INSPECTION COMPLETED

II o) C.1.25 I INSPECTION COMPLETED

II p) C.1.26 I INSPECTION COMPLETED

II q) C.1.27 I INSPECTION COMPLETED

III C.1.28 SUBMERSIBLE PUMP - ETP

III a) C.1.29 I

III b) C.1.30 I

IV C.1.31 DOSING PUMP - ETP PLANT

IV a) C.1.32 II INSPECTION COMPL MUMBAI

IV b) C.1.33 II INSPECTION COMPL MUMBAI

IV c) C.1.34 II INSPECTION COMPL MUMBAI

IV d) C.1.35 II INSPECTION COMPL MUMBAI

IV e) C.1.36 II INSPECTION COMPL MUMBAI

V C.1.37 SCREW TYPE PUMP - ETP

V a) C.1.38 II

VI C.1.39 ROOT TYPE BLOWER - ETP PLANT

VI a) C.1.40 II

VI b) C.1.41 II

VI c) C.1.42 II

PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00023 (P-3200A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00022(P-3210A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00021 (P-3220 A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-EFFLUENT TRANSFER PUMP,AS PER DOC.NO:WHMHB00020 (P-3230A/B)

PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-API SEPARATOR OVERFLOW TRANSFER PUMPS,AS PER DOC.NO:WHMHB00019 (P-3100 A/B)

PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI, SERVICE-EFFLUENT TRANSFER PUMPS -VIII,AS PER DOC.NO:WHMHB00026 (P-3140A/B)PUMP,VERTICAL CENTRIFUGAL; CASING MOC-2.5% NiCI,SERVICE-CLARIFIER SLUDGE TRANSFER PUMP,AS PER DOC.NO:WHMHB00027 (P-3160A)

PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-RAW WATER PUMP,AS PER DOC.NO:WHMHF00006 (P-3310 A/B)

PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-RAW WATER PUMP,AS PER DOC.NO:WHMHF00007 (P-3320A/B)

PUMP,DOSING;DIAPHRAGM TYPE, LIQUID HEAD MOC-PP,SERVICE-ALUM DOSING PUMP,AS PER DOC.NO: WHMHK00092PUMP,DOSING; DIAPHRAGM TYPE, LIQUID HEAD MOC-PP,SERVICE-PE DOSING PUMP,AS PER DOC.NO: WHMHK00093PUMP,DOSING;DIAPHRAGM TYPE, LIQUID HEAD MOC-PP,SERVICE-DWPE PE DOSING PUMP,AS PER DOC.NO: WHMHK00094PUMP,DOSING; DIAPHRAGM TYPE, LIQUID HEAD MOC-PP,SERVICE-ACID DOSING PUMP,AS PER DOC.NO: WHMHK00092PUMP,DOSING;DIAPHRAGM TYPE, LIQUID HEAD MOC-PP,SERVICE- CAUSTIC DOSING PUMP-ETP,AS PER DOC.NO: WHMHK00096

PUMP,HORIZONTAL SCREW; CASING MOC-CI,SERVICE-SLUDGE TRANSFER PUMP,AS PER DOC.NO:WHMHB00025

INSPECTION CALL RAISED and SCHEDULE ON 21/05/10

BLOWER,ROOTS TYPE; CASING MOC-CI GR FG260 IS 210,SERVICE- AIR BLOWER FOR ETP,AS PER DOC.NO: WHMJB00059BLOWER,ROOTS TYPE; CASING MOC-CI GR FG 260 IS 210,SERVICE-AIR BLOWER FOR CENTRAL MONITORING BASIN,AS PER DOC.NO: WHMJB00060BLOWER,ROOTS TYPE; CASING MOC-CI GR FG 260 IS 210,SERVICE-AIR BLOWER FOR CLARIFIER SLUDGE SUMP,AS PER DOC.NO: WHMJB00061

of 35

VI c) C.1.43 II

VII C.1.44 MIXERS

VII a) C.1.45 III 31/03/10

VII b) C.1.46 III 31/03/10

VII c) C.1.47 III 31/03/10

VII d) C.1.48 III 31/03/10

VII e) C.1.49 III 31/03/10

VII f) C.1.50 III 31/03/10

VIII C.1.51 THICKENER - ETP

VIII a) C.1.52 SLUDGE THICKENER MECHANISM; AS PER DOC I

IX C.1.53 CENTRIFUGE-ETP

IX a) C.1.54 CENTRIFUGE; AS PER DOCUMENT NO; WHMVY0 I

B C.1.55 BOUGHT OUT AND FABRICATED ITEMS

a) C.1.56 OIL SKIMMER - ETP

ai) C.1.57 III 31/03/10

a ii) C.1.58 III 31/03/10

b) C.1.59 ISOLATION GATES

b i) C.1.60 I UNDER MANUFATURING

b ii) C.1.61 I UNDER MANUFATURING

b iii) C.1.62 I UNDER MANUFATURING

b iv) C.1.63 I UNDER MANUFATURING

b v) C.1.64 I UNDER MANUFATURING

b vi) C.1.65 I UNDER MANUFATURING

c) C.1.66 PRE FABIRCATED PIPE

c i) C.1.67 III 31/03/10

BLOWER,ROOTS TYPE; CASING MOC-CI GR FG 260 IS 210,SERVICE-AIR BLOWER FOR THICKENED SLUDGE SUMP,AS PER DOC.NO:WHMJB00062

FLASH MIXER-SLOW SPEED,MOC:MILD STEEL EPOXY PAINTED; AS PER DOCUMENT/DRAWING NO; WHMLA00106

FLOCCULATOR MECHANISM; AS PER DOCUMENT NO; WHMLA00107

MIXER FOR ALUM DOSING TANK- SLOW SPEED ,MOC SS F316; AS PER DOCUMENT/DRAWING NO; WHMLA00108MIXER FOR LIME DOSING TANK- SLOW SPEED ,MOC SS F316; AS PER DOCUMENT/DRAWING NO; WHMLA00108MIXER FOR PE DOSING - HIGH SPEED ,MOC: SS 316; AS PER DOCUMENT/DRAWING NO; WHMLB00058MIXER FOR DWPE DOSING - HIGH SPEED,MOC: SS 316; AS PER DOCUMENT/DRAWING NO; WHMLB00058

OIL WATER SEPERATOR TPI; AS PER DOCUMENT NO;WHMVN00002

OIL WATER SEPERATOR API; AS PER DOCUMENT NO;WHMVN00001

MOTORISED EXISTING AT OUTLET OF CLARIFIER SLUDGE SUMP GT-011/012

MOTORISED EXISTING AT THE OUTLET OF SSF BACKWASH SUMP GT-003/004

MOTORISED EXISTING AT THE INLET OF CENTRAL MONITORING BASIN GT-007/008

MANUAL EXISTING AT INLET OF CLARIFIER SLUDGE SUMP GT-009/010

MANUAL EXISTING AT THE INLET OF COMMON COLLECTION SUMP GT-005/006

MANUAL EXISTING AT THE INLET OF SSF BACKWASH SUMP GT-001/002

PRE- FABRICATION & PAINTING OF AIR GRID FOR CENTRAL MONITORING BASIN AS PER DRG NO:WFMSD00030 FOR OC:630128

of 35

c ii) C.1.68 III 31/03/10

c ii) C.1.69 III 13/02/10

c iv) C.1.70 III TO BE APPLIED BY THERMAX

d) C.1.71 TUBE SETTLER MEDIA I

e) C.1.72 MANUAL VALVES

i) C.1.73 NEDDLE VALVE- SCREWED END

ia) C.1.74 15NB; VALVE,NEEDLE; SCREWED END,NPT,BOD III

ii) C.1.75 BUTTERFLY VALVE

ii a) C.1.76 I

ii b) C.1.77 I

ii c) C.1.78 I

ii d) C.1.79 I

ii e) C.1.80 I

ii f) C.1.81 I

ii g) C.1.82 I

ii h) C.1.83 I

ii i) C.1.84 I

ii j) C.1.85 I

ii k) C.1.86 I

ii l) C.1.87 I

iii) C.1.88 CI- BALL VALVE

iii a) C.1.89 I

iii b) C.1.90 I

iv) C.1.91 DUAL PLATE CHECK VALVE

iv a) C.1.92 I

iv b) C.1.93 I

PRE- FAB & PAINTING OF AIR GRID FOR THICKENED SLUDGE SUMP (ES-12) ;AS PER DRAWING NO:WFMSD00022

PRE- FABRICATION & PAINTING OF AIR GRID FOR SLUDGE COLLECTION SUMP AS PER DRAWING NO:WFMSD00027 FOR OC:630128

PRE-FAB OF AIR GRID FOR CLARIFIER SLUDGE SUMP; AS PER DRG;

INSPECTION CALL RAISED 03 TIMES SINCE FEBRUARY

SIZE 40 NB;VALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00015;






















SIZE 650 NB :VALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.47 SERIES A,BODY MOC:CI,AS PER DOC. NO;WHMEB00015;


32NB;VALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO; WHMGK00001;40NB;VALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO; WHMGK00001;

300NB;VALVE,DUAL PLATE; LUG TYPE SUITABLE FOR SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEH00002;


500NB;VALVE,DUAL PLATE; LUG TYPE SUITABLE FOR SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEH00002;


of 35

v) C.1.94 FLAP TYPE NRV CIEL

v a) C.1.95 I

v b) C.1.96 I

vi) C.1.97

vi a) C.1.98 I INSPECTION COMPL MUMBAI

vi b) C.1.99 I INSPECTION COMPL MUMBAI

vi c) C.1.100 I INSPECTION COMPL MUMBAI

vi d) C.1.101 I INSPECTION COMPL MUMBAI

vi e) C.1.102 I INSPECTION COMPL MUMBAI

vii) C.1.103

vii a) C.1.104 I INSPECTION COMPL MUMBAI

vii b) C.1.105 I INSPECTION COMPL MUMBAI

vii c) C.1.106 I INSPECTION COMPL MUMBAI

vii d) C.1.107 I INSPECTION COMPL MUMBAI

viii) C.1.108 SAFETY /PRESSURE RELIEF VALVE

viii a) C.1.109 II TO BE APPLIED BY THERMAX

viii b) C.1.110 II TO BE APPLIED BY THERMAX

viiii c) C.1.111 II TO BE APPLIED BY THERMAX

ix) C.1.112 KNIFE GATE VALVE

ix a) C.1.113 I

ix b) C.1.114 I

x) C.1.115 PLUG VALVE

x a) C.1.116 III TO BE APPLIED BY THERMAX

x b) C.1.117 III TO BE APPLIED BY THERMAX

x c) C.1.118 III TO BE APPLIED BY THERMAX

xi) C.1.119 SWING CHECK VALVE

25NB;VALVE,FLAP CHK; FLGD END TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMEB00001,


50NB;VALVE,FLAP CHK; FLGD END TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMEB00001,;


CAST IRON WITH UNLINED DIAPHRAGM VALVE

25NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB0001,32NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB0001,;40NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB000150NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB000165NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB0001,

CAST IRON WITH EBONITE LINED DIPHRAGM VALVE

25NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,32NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,40NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,50NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,

25NB;SAFETY / PRESSURE RELIEF VALVE; AS PER DOC. NO;WHMFA00013;;(MEDIA LIME); END CONNECTION -ANSI B16.5,150#25NB;SAFETY / PRESSURE RELIEF VALVE; AS PER DOC. NO;WHMFA00014;;(MEDIA LIME); END CONNECTION -ANSI B16.5,150#

80NB;SAFETY / PRESSURE RELIEF VALVE; AS PER DOC. NO;WHMFA00015;;(MEDIA SLUDGE); END CONNECTION -ANSI B16.5,150#

25NB;VALVE GATE; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDF00001;


300 NB,EXTENDED STEM,VALVE,KNIFE GATE; LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMDF00014;


25NB;VALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WHMDM00002;50NB;VALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WHMDM00002;65NB;VALVE,PLUG; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WHMDM00002;

of 35

xi a) C.1.120 I INSPECTION COMPL MUMBAI

xi b) C.1.121 I INSPECTION COMPL MUMBAI

xi c) C.1.122 I INSPECTION COMPL MUMBAI

xi d) C.1.123 I INSPECTION COMPL MUMBAI

xi e) C.1.124 I INSPECTION COMPL MUMBAI

xi f) C.1.125 I INSPECTION COMPL MUMBAI

xi g) C.1.126 I INSPECTION COMPL MUMBAI

xi h) C.1.127 I INSPECTION COMPL MUMBAI

f) C.1.128 III

g) C.1.129 PIPING

i) C.1.130 MS PIPING

a) C.1.131 III

b) C.1.132 III

c) C.1.133 III

d) C.1.134 III

e) C.1.135 III

f) C.1.136 III

g) C.1.137 III

h) C.1.138 III

i) C.1.139 III

j) C.1.140 III

k) C.1.141 III

l) C.1.142 III

m) C.1.143 III

n) C.1.144 III

o) C.1.145 III TO BE APPLIED BY THERMAX

25 NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;;WGMEE0000132 NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;;WGMEE0000140 NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;;WGMEE0000150 NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;;WGMEE0000165NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMEE00001;80NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMEE00001125NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMEE00001;150NB;VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMEE00001;

DUMPER TRUCK ,MAKE ASHOK LAYLAND; AS PER DOCUMENT NO; WHMXJ00001




40NB; PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK;

50NB,PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK;


80NB;PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK

100NB;PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK



200NB;PIPE,CARBON STEEL,ERW; IS:3589 GR 410,LATEST EDN,6.35 MM NOM.THK;




500 NB;PIPE,CARBON STEEL,ERW; IS:3589 GR 410,LATEST EDN,8.0 MM NOM.THK;

of 35

p) C.1.146 III 22/3/10

ii) C.1.147 GI PIPING

a0 C.1.148 III TO BE APPLIED BY THERMAX

b) C.1.149 III TO BE APPLIED BY THERMAX

c) C.1.150 III TO BE APPLIED BY THERMAX

d) C.1.151 III TO BE APPLIED BY THERMAX

e) C.1.152 III TO BE APPLIED BY THERMAX

f) C.1.153 III TO BE APPLIED BY THERMAX

iii) C.1.154 MS FITTINGS

a) C.1.155 III

b) C.1.156 III

c) C.1.157 III

d) C.1.158 III

e) C.1.159 III

f) C.1.160 III

g) C.1.161 III

h) C.1.162 III

i) C.1.163 III

j) C.1.164 III

k) C.1.165 III

l) C.1.166 III

m) C.1.167 III

n) C.1.168 III

o) C.1.169 III 12/2/2010

p) C.1.170 III 22/03/10

q) C.1.171 III 22/03/10

650 NB;PIPE,CARBON STEEL,ERW; IS:3589 GR 410,LATEST EDN,8.0 MM NOM.THK;

25NB;PIPE,GI,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,HOT DIPPED GALVANISED;



50NB;PIPE,GI,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,HOT DIPPED GALVANISED



15 NB:FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF, PLATE TYPE;25 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 32 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 40 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 50 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 65 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 80 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 100NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 125 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 150 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 200 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 250 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 300 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 350 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 500 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF;

25NB;ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK

32NB;ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;

of 35

r) C.1.172 III 22/03/10

s) C.1.173 III 22/03/10

t) C.1.174 III 22/03/10

u) C.1.175 III 22/03/10

v) C.1.176 III 22/03/10

w) C.1.177 III 22/03/10

x) C.1.178 III 22/03/10

y) C.1.179 III 22/03/10

z) C.1.180 III 22/03/10

aa) C.1.181 III 22/03/10

bb) C.1.182 III 22/03/10

cc) C.1.183 III 22/03/10

dd) C.1.184 III 22/03/10

ee) C.1.185 III 22/03/10

ff) C.1.186 III 22/03/10

gg) C.1.187 III 22/03/10

hh) C.1.188 III 22/03/10

ii) C.1.189 III 22/03/10

jj) C.1.190 III 22/03/10

kk) C.1.191 III 22/03/10

ll) C.1.192 III 22/03/10

mm) C.1.193 III 22/03/10

nn) C.1.194 III 22/03/10

oo) C.1.195 III 22/03/10

pp) C.1.196 III 22/03/10

qq) C.1.197 III 22/03/10





100NB;ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;125NB;ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;150NB;ELBOW 90DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;200NB;ELBOW 90DEG,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,R=1.5D,BW,ANSI B16.9,SCH 20;250NB;ELBOW 90DEG,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,R=1.5D,BW,ANSI B16.9,SCH 20;300NB;ELBOW 90DEG,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,R=1.5D,BW,ANSI B16.9,SCH 20;

25NB;TEE EQUAL,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;




80NB;TEE EQUAL,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK





200NB;TEE EQUAL,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,BW,ANSI B16.9,SCH 20;REDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;32NBX25NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;40NBX25NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NBX40NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NBX32NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NBX25NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;65NBX50NB

of 35

rr) C.1.198 III 22/03/10

ss) C.1.199 III 22/03/10

tt) C.1.200 III 22/03/10

uu) C.1.201 III 22/03/10

vv) C.1.202 III 22/03/10

ww) C.1.203 III 22/03/10

xx) C.1.204 III 22/03/10

yy) C.1.205 III 22/03/10

zz) C.1.206 III 22/03/10

aaa) C.1.207 III 22/03/10

bbb) C.1.208 III 22/03/10

ccc) C.1.209 III 22/03/10

ddd) C.1.210 III 22/03/10

eee) C.1.211 III 22/03/10

fff) C.1.212 III 22/03/10

ggg) C.1.213 III 22/03/10

hhh) C.1.214 III 22/03/10

iii) C.1.215 III 22/03/10

jjj) C.1.216 III 22/03/10

kkk) C.1.217 III 22/03/10

h) C.1.218 ELECTRICAL HOIST

h i) C.1.219 I

h ii) C.1.220 I

h iii) C.1.221 I

h iv) C.1.222 I

REDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;65NBX40NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;80NBX65NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;80NBX50NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;100NBX80NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;125NBX65NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;150NBX125NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;150NBX100NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;150NBX80NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,BW,ANSI B16.9,SCH 20xSCH 20;200NBX150NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,BW,ANSI B16.9,SCH 20xSCH 20;300NBX150NBREDUCER ECCENTRIC,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,BW,ANSI B16.9,SCH 20xSCH 20;200NBX125NBREDUCER ECCENTRIC,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,BW,ANSI B16.9,SCH 20xSCH 20;300NBX200NBELBOW 45DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;25NBELBOW 45DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;40NBELBOW 45DEG,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;125NBELBOW 45DEG,CARBON STEEL,WELDED; SA234 GR.WPB-W,LATEST EDN,R=1.5D,BW,ANSI B16.9,SCH 20;200NBFLANGE,CARBON STEEL,BLIND; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF,STK FINISH;32NBFLANGE,CARBON STEEL,BLIND; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF,STK FINISH;65NBFLANGE,CARBON STEEL,BLIND; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF,STK FINISH;100NBFLANGE,CARBON STEEL,BLIND; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF,STK FINISH;500NB

1T CHAIN PULLY BLOCK WITH GEARED TROLLEY WITH 5 m LIFT; AS PER DOCUMENT NO;


1 TON ELECTRICAL HOIST WITH ELECTRICALLY OPERATED GEARED TROLLEY, LIFT: 5 Meters WITH TURNING RADIUS 2.2m; AS PER DOCUMENT NO;


1 TON CHAIN PULLY BLOCK WITH GEARED TROLLEY FOR CHEMICAL HOUSE (GROUND FLOOR)


2 TON ELECTRICAL HOIST WITH ELECTRICALLY OPERATED GEARED TROLLEY, LIFT: 12 Meters WITHOUT TURNING RADIUS; AS PER DOCUMENT NO;


of 35

h v) C.1.223 I

C) C.1.224 ELECTRICAL ITEMS

a) C.1.225 MOTORS

a i) C.1.226 III

a ii) C.1.227 III

a iii) C.1.228 III

a iv) C.1.229 III

a v) C.1.230 III

a vi) C.1.231 III

a vii) C.1.232 III

a viii) C.1.233 III

a ix) C.1.234 III

a x) C.1.235 III

a xi) C.1.236 III

a xii) C.1.237 III

a xii) C.1.238 III

a xiv) C.1.239 III

a xv) C.1.240 III

a xvi) C.1.241 III

a xvii) C.1.242 III

a xviii) C.1.243 III

a xix) C.1.244 III

a xx) C.1.245 III

a xxi) C.1.246 III

a xxii) C.1.247 III

a xxiii) C.1.248 III

1 TON ELECTRICAL HOIST WITH ELECTRICALLY OPERATED GEARED TROLLEY, LIFT: 12 Meters WITH TURNING RADIUS 2.2m; AS PER DOCUMENT NO;


30KW, 4POLE, B3 MOUNTING VFD OPERATED MOTOR AS PER DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC22KW, 4POLE, B3 MOUNTING MOTOR AS PER

DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC

15KW, 2POLE, V1 MOUNTING MOTOR AS PER DOC NO WHEDB00091


15KW, 4POLE, V1 MOUNTING MOTOR AS PER DOC NO WHEDB00091


DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC11KW, 2POLE, V1 MOUNTING MOTOR AS PER

DOC NO WHEDB00091


DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC9.3KW, 2POLE, V1 MOUNTING MOTOR AS PER

DOC NO WHEDB00091


DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC7.5KW, 4POLE, B3 MOUNTING MOTOR AS PER

DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091


of 35

a xxiv) C.1.249 III

a xxv) C.1.250 III

a xxvi ) C.1.251 III

a xxvii) C.1.252 III

a xxviii) C.1.253 III

a xxix) C.1.254 I

b) C.1.255 JUNCTION BOXES

b i) C.1.256 III

b ii) C.1.257 III

b iii) C.1.258 III

b iv) C.1.259 III

b v) C.1.260 III

D C.1.261 CONTROL AND INSTRUMENTATION

a) C.1.262 PRESSURE GUAGES

a i) C.1.263 III 5/21/2010

aii ) C.1.264 III 5/21/2010

aiii ) C.1.265 III TO BE APPLIED BY THERMAX

aiv ) C.1.266 III 5/21/2010

av ) C.1.267 III 5/21/2010

avi ) C.1.268 III 5/21/2010

avii ) C.1.269 III 5/21/2010

aviii ) C.1.270 III TO BE APPLIED BY THERMAX



DOC NO WHEDB00091


DOC NO WHEDB00091

DOCUMENT APPROVAL RECD ON 04/05 RESUBMISSION PENDING FROM THERMAXPENDING FROM BHEL-NTPC15KW, 4POLE, V1 MOUNTING MOTOR AS PER

DOC NO WHEDB00091


DOC NO WHEDB00091


DOC NO WHEDB00091





EQUIPT : POWER JB BOX : WITH 12 NOS. TERMINALS & MCB'S AS PER DRG. NO.-WFJHF00030




ELECTRICAL EQUIPT : JUNCTION BOX FOR SUBMERSIBLE PUMPS OF ETP SUMP AREA, AS PER DOC NO.-WFEBB00007


PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-1 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-1.6 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-4 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-6 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-10 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-16 KG/CM2, AS PER DOC NO.WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 1.6 KG/CM2, AS PER DOC NO WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 4 KG/CM2, AS PER DOC NO WHJAA00068

of 35

aix ) C.1.271 III 5/21/2010

ax ) C.1.272 III 5/21/2010

a xi ) C.1.273 III 5/21/2010

b) C.1.274 PRESSURE SWITCH

i) C.1.275 II

c) C.1.276 ORIFICE PLATE

i) C.1.277 II

d) C.1.278 FLOW TRANSMITTER DIFF PR TYPE

i) C.1.279 I

e) C.1.280 LEVEL SWITCH

i) C.1.281 III 31/3/10

ii) C.1.282 II BHOPAL INSPECTION

f) C.1.284 LEVEL GUAGE

i) C.1.285 III 31/3/10

ii) C.1.286 III 31/3/10

iii) C.1.287 III 31/3/10

g) C.1.288 LEVEL INDICATOR

i) C.1.289 III 31/3/10

ii) C.1.290 III 31/3/10

iii) C.1.291 III 31/3/10

iv) C.1.292 III 31/3/10

h) C.1.293 III

i) C.1.294 III

j) C.1.295 III

k) C.1.296 III

l) C.1.297 III

PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 6 KG/CM2, AS PER DOC NO WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 10 KG/CM2, AS PER DOC NO WHJAA00068PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE 0 - 16 KG/CM2, AS PER DOC NO WHJAA00068

PR INSTR : PRESSURE SWITCH :AS PER DOC.NO.WHJAC00007

FLOW INSTR : ORIFICE PLATE :FOR TAG NO.FE-507,AS PER DOC NO.WHJBB00010

FLOW INSTR : FLOW TRANSMITTER : DIFF PR TYPE :FOR TAG NO.FT-507,AS PER DOC NO.WHJBC00010

LEVEL INSTR : LEVEL SWITCH : SIDE MOUNTED MAGNETIC FLOAT TYPE :AS PER DOC NO.WHJCD00024

LEVEL INSTR : LEVEL SWITCH : CAPACITANCE TYPE :AS PER DOC NO.WHJCD00025

LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C-C DISTANCE 1000 mm AS PER DOC NO.WHJCA00018LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C-C DISTANCE 1300 mm AS PER DOC NO.WHJCA00018LEVEL INSTR : LEVEL GAUGE : REFLEX TYPE :C-C DISTANCE 900 mm AS PER DOC NO.WHJCA00018

LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-621 A,LIB-621 B AS PER DOC NO.WHJCB00008LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-623 A,LIB-623 B,LIB-626 AS PER DOC NO.WHJCB00008LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-627.AS PER DOC NO.WHJCB0008LEVEL INSTR : FLOAT & BOARD LEVEL INDICATOR :FOR TAG NO.LIB-629 A,LIB-629 B.AS PER DOC NO.WHJCB0008

CONDUCTIVITY ANALYSER :FOR TAG NO.AE/AT-803,AS PER DOC NO.WHJEB00011

TURBIDITY ANALYSER :FOR TAG NO.AE/AT-802,AS PER DOC NO.WHJED00002

PH SENSOR :FOR TAG NO.AE-801 AS PER DOC NO.WHJEG00001

PH TRANSMITTER :FOR TAG NO.AT-801 AS PER DOC NO.WHJEG00001

TEMP INSTR : TEMPERATURE TRANSMITTER :FOR TAG NO.TT-901 AS PER DOC NO.WHJMD00002

of 35

m) C.1.298 III

n) C.1.299 MOTORISED VALVE

i) C.1.300 I

ii) C.1.301 I

iii) C.1.302 I

iv) C.1.303 I

v) C.1.304 I

vi) C.1.305 I

vii) C.1.306 I

viii) C.1.307 I

ix) C.1.308 I

o) C.1.309 MOTORISED VALVE

i) C.1.310 MOTORISED BALL VALVE I

p) C.1.311 PLC SYSTEM

i) C.1.312 I

q) C.1.313 UPS FOR ETP & STP PLANT

i) C.1.314 BATTERY CHARGER FOR ETP & STP PLANT I

r) C.1.315 STRUCTURAL STEEL III

TEMP INSTR : ELEMENT :FOR TAG NO.TE-901,AS PER DOC NO.WHJMD00003

MOTORISED VALVE :FOR LINE SIZE 40 NB AS PER DOC NO.WHJGH00006









PLC SYSTEM AS PER DOC NO :WHJHA00060 FOR ETP -STP PLANT

of 35

STP SEWAGE TREATMENT PLANT

A D.1.1 ROTATING EQUIPMENT

a) D.1.2 HORIZONTAL CENTRIFUGAL PUMP - STP

i) D.1.3 I

ii) D.1.4 I

b) D.1.5 SUBMERSIBLE PUMP - STP

i) D.1.6 I

ii) D.1.7 I

iii) D.1.8 I

iv) D.1.9 I

v) D.1.10 I

c) D.1.11 CHLORINATION BOOSTER PUMP

i) D.1.12 I

d) D.1.13 ROOT TYPE BLOWER - STP PLANT

i) D.1.14 II

B) D.1.15 BOUGHT OUT AND FABRICATED ITEMS

a) D.1.16 PRE FABRICATED PIPE

i) D.1.17 III 13/02/10

ii) D.1.18 III 13/02/10

b) D.1.19 DIFFUSER,MAGNUM 2000,FIXED TYPE III TO BE APPLIED

c) D.1.20 CHLORINATION SYSTEM FOR STP

i) D.1.21 I

d) D.1.22 MANUAL VALVES

i) D.1.23 NEDDLE VALVE- SCREWED END

ia) D.1.24 III

PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2% NiCI,SERVICE-SLUDGE RECYCLE PUMP,AS PER DOC.NO: (P-4060A/B)PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-2% NiCI,SERVICE-TREATED SEWAGE PUMPS,AS PER DOC.NO:(P-4070 A/B)

PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-SEWAGE TRANSFER PUMP-1,AS PER DOC.NO:(P-4010A/B)PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-SEWAGE TRANSFER PUMP-2,AS PER DOC.NO:(P-4020A/B)PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-SEWAGE TRANSFER PUMP-3,AS PER DOC.NO:(P-4030A/B)PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-SEWAGE TRANSFER PUMP-4,AS PER DOC.NO:(P-4040A/B)PUMP,SUBMERSIBLE; CASING MOC-CI,SERVICE-SEWAGE TRANSFER PUMP-5,AS PER DOC.NO:(P-4050A/B)


PUMP,HORIZONTAL CENTRIFUGAL; CASING MOC-CI,SERVICE-CHLORINE BOOSTER PUMP,AS PER DOC.NO:WHMHA00235 (P-4080A/B)

BLOWER,ROOTS TYPE; CASING MOC-IS 210 GR FG 260,SERVICE-AERATION TANK AIR BLOWER -WITH ACCOUSTIC HOOD,AS PER DOC.NO:WHMJB00067

FAB & PAINTING OF AERATION TANK GRID AS PER DRG;WFMSD00028 FOR OC:630128

FABRICATION & PAINTING OF AIR GRID FOR COMMON COLLECTION SUMP AS PER DRAWING NO:WFMSD00029 FOR OC:630128

CHLORINATION SYSTEM; AS PER DOCUMENT NO; WHMXB00017

VALVE,NEEDLE; SCREWED END,NPT,BODY MOC:SS316,AS PER DOC.NO:WGMDQ00001,15NB;

of 35

ii) D.1.25 BUTTERFLY VALVE

ii a) D.1.26 I

ii b) D.1.27 I

ii c) D.1.28 I

iii) D.1.29 BALL VALVE

iii a) D.1.30 I

iii b) D.1.31 I

iii c) D.1.32 I

iii d) D.1.33 I

iv) D.1.34 DIPHRAGM VALVE

iv a) D.1.35 I

iv b) D.1.36 I

v) D.1.37 SWING CHECK VALVE

v a) D.1.38 I

v b) D.1.39 I

v c) D.1.40 I

v d) D.1.41 I

v e) D.1.42 I

vi) D.1.43 MS PIPING

vi a) D.1.44 III

vi b) D.1.45 III

vi c) D.1.46 III

vi d) D.1.47 III

vi e) D.1.48 III

vi f) D.1.49 III

vi g) D.1.50 III

VALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00015;SIZE 50 NBVALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00015;SIZE 65 NBVALVE,BUTTERFLY; WAFER LUG TYPE SUITABLE FOR ANSI B 16.5,BODY MOC:CI,AS PER DOC. NO;WHMEB00015;SIZE 100 NB

VALVE,BALL; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO; WHMGK00001;20NB




VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMDB0001,25NB;VALVE,DIAPHRAGM; FLGD TO ANSI B16.5,BODY MOC:CI LINED,AS PER DOC. NO;WGMDC00001,15NB;

VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;20 NB;WGMEE00001VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;25 NB;WGMEE00001VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;32 NB;WGMEE00001VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;50 NB;WGMEE00001VALVE,SWING CHK; FLGD END TO ANSI B16.5,BODY MOC:CI,AS PER DOC. NO;WGMEE00001;65NB








of 35

vi h) D.1.51 III

vi) D.1.52 HDPE PIPING

vi a) D.1.53 III TO BE APPLIED BY THERMAX

vi b) D.1.54 III TO BE APPLIED BY THERMAX

vi c) D.1.55 III TO BE APPLIED BY THERMAX

vi d) D.1.56 III TO BE APPLIED BY THERMAX

vi e) D.1.57 III TO BE APPLIED BY THERMAX

vi f) D.1.58 III TO BE APPLIED BY THERMAX

vi g) D.1.59 III TO BE APPLIED BY THERMAX

vii) D.1.60 MS FITTINGS

vii a) D.1.61 III

vii b) D.1.62 III

vii c) D.1.63 III

vii d) D.1.64 III

vii e) D.1.65 III

vii f) D.1.66 III

vii g) D.1.67 III

vii h) D.1.68 III

vii i) D.1.69 III

vii j) D.1.70 III

vii j) D.1.71 III

vii k) D.1.72 III

vii l) D.1.73 III

vii m) D.1.74 III

vii n) D.1.75 III

vii o) D.1.76 III

100NB ;PIPE,CARBON STEEL,ERW; IS:1239 PART-I,LATEST EDN,HEAVY,BLACK

d20 (15 NB)PIPE,HDPE; IS 4984,LATEST EDN,PE63,PN10;

d32 (25NB)PIPE,HDPE; IS 4984,LATEST EDN,PE63,PN10;

d40 (32NB)PIPE,HDPE; IS 4984,LATEST EDN,PE63,PN10;

d50 (40NB);PIPE,HDPE; IS 4984,LATEST EDN,PE63,PN10;
















REDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;40NBX25NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;40NBX20NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;50NBX40NBREDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;100NBX65NB

of 35

vii p) D.1.77 III

vii q) D.1.78 III

vii r) D.1.79 III

vii s) D.1.80 III

vii t) D.1.81 III

vii u) D.1.82 III

vii v) D.1.83 III

vii w) D.1.84 III 30/03/10

vii x) D.1.85 III

ix) D.1.86 HDPE FITTINGS

ix a) D.1.87 III TO BE APPLIED BY THERMAX

ix b) D.1.88 III TO BE APPLIED BY THERMAX

ix c) D.1.89 III TO BE APPLIED BY THERMAX

ix d) D.1.90 III TO BE APPLIED BY THERMAX

ix e) D.1.91 III TO BE APPLIED BY THERMAX

ix f) D.1.92 III TO BE APPLIED BY THERMAX

ix g) D.1.93 III TO BE APPLIED BY THERMAX

ix h) D.1.94 III TO BE APPLIED BY THERMAX

ix i) D.1.95 III TO BE APPLIED BY THERMAX

ix j) D.1.96 III TO BE APPLIED BY THERMAX

ix k) D.1.97 III TO BE APPLIED BY THERMAX

ix l) D.1.98 III TO BE APPLIED BY THERMAX

ix m) D.1.99 III TO BE APPLIED BY THERMAX

ix n) D.1.100 III TO BE APPLIED BY THERMAX

ix o) D.1.101 III TO BE APPLIED BY THERMAX

ix p) D.1.102 III TO BE APPLIED BY THERMAX

REDUCER CONCENTRIC,CARBON STEEL,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK;100NBX50NB 15 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,FF, PLATE TYPE;20 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 25 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 40 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 50 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF; 65 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF;80 NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF;100NB;FLANGE,CARBON STEEL,SLIP-ON; IS:2062 GR.A,LATEST EDN,ANSI B16.5 150#,PLATE TYPE,FF;

ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d20 (15NB)ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d32 (25NB)ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d40 (32NB)ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d50 (40NB)ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d63 (50NB)ELBOW 90DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d75 (65NB)ELBOW 45DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d63 (50NB)ELBOW 45DEG,HDPE; 3 PIECE MITRE FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10;d75 (65NB)REDUCER CONCENTRIC,HDPE; FAB.FROM IS:4984,LATEST EDN,PE63,PN10; 50(OD)X40(OD)REDUCER CONCENTRIC,HDPE; FAB.FROM IS:4984,LATEST EDN,PE63,PN10; 60(OD)X50(OD)REDUCER CONCENTRIC,HDPE; FAB.FROM IS:4984,LATEST EDN,PE63,PN10; 75(OD)X50(OD)REDUCER CONCENTRIC,HDPE; FAB.FROM IS:4984,LATEST EDN,PE63,PN10; 110(OD)X63(OD)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d20(15NB)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d32(25NB)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d40(32NB)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d50(40NB)

of 35

ix q) D.1.103 III TO BE APPLIED BY THERMAX

ix r) D.1.104 III TO BE APPLIED BY THERMAX

ix s) D.1.105 III TO BE APPLIED BY THERMAX

ix t) D.1.106 III TO BE APPLIED BY THERMAX

ix u) D.1.107 III TO BE APPLIED BY THERMAX

ix v) D.1.108 III TO BE APPLIED BY THERMAX

ix w) D.1.109 III TO BE APPLIED BY THERMAX

ix x) D.1.110 III TO BE APPLIED BY THERMAX

ix y) D.1.111 III TO BE APPLIED BY THERMAX

ix z) D.1.112 III TO BE APPLIED BY THERMAX

ix aa) D.1.113 III TO BE APPLIED BY THERMAX

ix bb) D.1.114 III TO BE APPLIED BY THERMAX

x) D.1.115 GI FITTINGS

x a) D.1.116 III TO BE APPLIED BY THERMAX

x b) D.1.117 III TO BE APPLIED BY THERMAX

x c) D.1.118 III TO BE APPLIED BY THERMAX

x d) D.1.119 III TO BE APPLIED BY THERMAX

x e) D.1.120 III TO BE APPLIED BY THERMAX

x f) D.1.121 III TO BE APPLIED BY THERMAX

x g) D.1.122 III TO BE APPLIED BY THERMAX

x h) D.1.123 III TO BE APPLIED BY THERMAX

x i) D.1.124 III TO BE APPLIED BY THERMAX

x j) D.1.125 III TO BE APPLIED BY THERMAX

x k) D.1.126 III TO BE APPLIED BY THERMAX

x l) D.1.127 III TO BE APPLIED BY THERMAX

x m) D.1.128 III TO BE APPLIED BY THERMAX

STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d63(50NB)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d75(65NB)STUBEND/FLANGE ADAPTOR,HDPE; FLANGE ADAPTOR,FLAT FACE,PE 63,PN 10,FUSION WELD TYPE;d110(100NB)

FLANGE,PE; BACKING, IS 4984, LATEST EDN, ANSI B 16.5 150#, GR PE 63, PN 10; d40(32NB)

FLANGE,PE; BACKING, IS 4984, LATEST EDN, ANSI B 16.5 150#, GR PE 63, PN 10; d50(40 NB)



FLANGE,PE; BACKING, IS 4984, LATEST EDN, ANSI B 16.5 150#, GR PE 63, PN 10; d20 (15NB)



TEE EQUAL,HDPE; FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10; d20 (15NB)

TEE EQUAL,HDPE; FAB.FROM IS:4984 PIPE,LATEST EDN,PE63,PN10; d63 (50NB)

ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 25 X 25 NB.ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 40 X 40 NB.ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 50 X 50 NB.ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 65 X 65 NB.ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 80 X 80 NB.ELBOW 90DEG,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 32 X 32 NB.TEE EQUAL,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 32 NBTEE EQUAL,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 25NB.TEE EQUAL,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 40 NB.TEE EQUAL,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 50 NB.TEE EQUAL,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BLACK,BSP(F)ENDS,HOT DIP GALVANISED; 65NBTEE REDUCING,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 50 X 25 X 50 NB.TEE REDUCING,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 80 X 65 X 80 NB.

of 35

x n) D.1.129 III TO BE APPLIED BY THERMAX

x o) D.1.130 III TO BE APPLIED BY THERMAX

x p) D.1.131 III TO BE APPLIED BY THERMAX

x q) D.1.132 III TO BE APPLIED BY THERMAX

x r) D.1.133 III TO BE APPLIED BY THERMAX

x s) D.1.134 III TO BE APPLIED BY THERMAX

x t) D.1.135 III TO BE APPLIED BY THERMAX

x u) D.1.136 III TO BE APPLIED BY THERMAX

x v) D.1.137 III TO BE APPLIED BY THERMAX

x w) D.1.138 III TO BE APPLIED BY THERMAX

x x) D.1.139 III TO BE APPLIED BY THERMAX

x y) D.1.140 III TO BE APPLIED BY THERMAX

x z) D.1.141 III TO BE APPLIED BY THERMAX

x aa) D.1.142 III TO BE APPLIED BY THERMAX

x bb) D.1.143 III TO BE APPLIED BY THERMAX

x cc) D.1.144 III TO BE APPLIED BY THERMAX

x dd) D.1.145 III 15/4/2010

x ee) D.1.146 III 15/4/2010

x ee) D.1.147 III 15/4/2010

x ff) D.1.148 III 15/4/2010

x gg) D.1.149 III 15/4/2010

x hh) D.1.150 III 15/4/2010

C) D.1.151 ELECTRICAL ITEMS

a) D.1.152 MOTORS

a i) D.1.153 III 31/03/10

a ii) D.1.154 III 31/03/10

TEE REDUCING,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 65 X 40 X 65 NB.TEE REDUCING,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 50 X 32 X 50 NB.UNION,GI,HEXAGONAL TYPE; MALLEABLE CI TO IS:1879,LATEST EDN,BSP(F)ENDS,HEAVY DUTY; 25 NB X 25 NB.UNION,GI,HEXAGONAL TYPE; MALLEABLE CI TO IS:1879,LATEST EDN,BSP(F)ENDS,HEAVY DUTY; 40 X 40 NB.UNION,GI,HEXAGONAL TYPE; MALLEABLE CI TO IS:1879,LATEST EDN,BSP(F)ENDS,HEAVY DUTY; 50 X 50 NB.UNION,GI,HEXAGONAL TYPE; MALLEABLE CI TO IS:1879,LATEST EDN,BSP(F)ENDS,HEAVY DUTY; 65 X 65 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 50 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 40 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 25 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 32 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 65 NB.SOCKET,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 80 NB.REDUCER CONCENTRIC,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 50 X 25 NB.REDUCER CONCENTRIC,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 50 X 40 NB.REDUCER CONCENTRIC,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 40 X 32 NB.REDUCER ECCENTRIC,GI,WELDED; IS:1239 PART-II,LATEST EDN,HEAVY,BSP(F)ENDS,HOT DIP GALVANIZED; 65 X 40 NB.FLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 25NBFLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 32NBFLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 40NBFLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 50NBFLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 65NBFLANGE,CARBON STEEL GALVNIZED,SCREWED; IS 2062 GR. A,LATEST EDN, ANSI B16.5 150#,FF,BSP(F),STK FINISH; 80NB



of 35

a iii) D.1.155 III 31/03/10

a iv) D.1.156 III 31/03/10

b) D.1.157 JUNCTION BOXES

b i) D.1.158 III

b ii) D.1.159 III

c) D.1.160 VFD DRIVE WITH PANEL III

D) D.1.161 CONTROL AND INSTRUMENTATION

a) D.1.162 PRESSURE GUAGES

a i) D.1.163 III 22/3/10

a ii) D.1.164 III 22/3/10

a ii) D.1.165 III 22/3/10

a iv) D.1.166 III 22/3/10

a v) D.1.167 III 22/3/10

a vi) D.1.168 III 22/3/10

b) D.1.169 PRESSURE SWITCHES

b i) D.1.170 II

b ii) D.1.171 II

c) D.1.172 ORIFICE PLATE

c i) D.1.173 II 22/04/10

d) D.1.174 FLOW TRANSMITTER

d i) D.1.175 I APPLIED ON 21/03/10

e) D.1.176 LEVEL SWITCH

e i) D.1.177 II BHOPAL- INSPECTION

e ii) D.1.178 II BHOPAL- INSPECTION

e iii) D.1.179 II BHOPAL- INSPECTION

f) D.1.180 pH SENSOR




DOCUMENT APPROVA L PENDING FROM BHEL-NTPC




PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE:0-2.5 KG/CM2 AS PER DOC NO.WHJAA00069PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE:0-4 KG/CM2 AS PER DOC NO.WHJAA00069PR INSTR : PRESSURE GAUGE : CHEM SEAL - FLANGED :RANGE:0-6 KG/CM2 AS PER DOC NO.WHJAA00069PR INSTR : PRESSURE GAUGE : BOURDON TYPE :RANGE 0 - 1 KG/CM2,AS PER DOC NO.WHJAA00069PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-10 KG/CM2 AWS PER DOC NO.WHJAA00067PR INSTR : PRESSURE GAUGE : CHEM SEAL - THREADED :RANGE 0-16 KG/CM2 AWS PER DOC NO.WHJAA00067

PR INSTR : PRESSURE SWITCH :AS PER DOC NO.WHJAC00008

PR INSTR : PRESSURE SWITCH :FOR TAG NO.PSH-327 AS PER DOC NO.WHJAC00008

FLOW INSTR : ORIFICE PLATE :FOR TAG NO.FE-511.AS PER DOC NO.WHJBB00011

FLOW INSTR : FLOW TRANSMITTER : DIFF PR TYPE :FOR TAG NO.FT-511,AS PER DOC NO.WHJBC00011

LEVEL INSTR : LEVEL SWITCH : CAPACITANCE TYPE :TANK HEIGHT 6300 mm AS PER DOC NO.WHJCD00026LEVEL INSTR : LEVEL SWITCH : CAPACITANCE TYPE :TANK HEIGHT 4600 mm AS PER DOC NO.WHJCD00026LEVEL INSTR : LEVEL SWITCH : CAPACITANCE TYPE :FOR TAG NO.LSH-756 A,LSL-756 B AS PER DOC NO.WHJCD00026

of 35

f i) D.1.181 III 30/03/10

f ii) D.1.182 III 30/03/10

g) D.1.183 MOTORISED VALVE

g i) D.1.184 MOTORISED BALL VALVE I

g ii) D.1.185 MOTORISED BALL VALVE I

h) D.1.186 MOTORISED VALVE

h i) D.1.187 I

h ii) D.1.188 I

PH SENSOR :FOR TAG NO.AE- 811 AS PER DOC NO.WHJEB00022

PH TRANSMITTER :FOR TAG NO.AT- 811 AS PER DOC NO.WHJEB00022



MOTORISED VALVE :FOR LINE SIZE 50 OD HDPE AS PER DOC NO.WHJGH00007




of 35

h iii) D.1.189 I

h iv) D.1.190 I

h v) D.1.191 I

i) D.1.192 CLO2 SYSTEM

I i) D.1.193 I 30/03/10

I ii) D.1.194 I 30/03/10

I iii) D.1.195 I 30/03/10

I iv) D.1.196 I 30/03/10

I v) D.1.197 I 30/03/10

I vi) D.1.198 I 30/03/10

I vii) D.1.199 I 30/03/10

I viii) D.1.200 I 30/03/10

I ix) D.1.201 I 30/03/10

I x) D.1.202 I 30/03/10

I xi) D.1.203 I 30/03/10



MOTORISED VALVE :FOR LINE SIZE 50 CS HDPE AS PER DOC NO.WHJGH00007


MOTORISED VALVE :FOR LINE SIZE 40 CS HDPE AS PER DOC NO.WHJGH00007


CLO2 SYSTEM - REAGENT DOSING SKID-1 FOR 2 X 35 KG/HR




DIFFUSER ASSEMBLY & SUBMERGED GENERATOR FOR 4X35 KG/HR

DIFFUSER ASSEMBLY & SUBMERGED GENERATOR FOR 2X25 KG/HR

ACCESSORIES FOR CLO2-COMMON CONTROL PANEL WITH REMOTE PLC SYSTEM

ACCESSORIES FOR CLO2-EASYA REDOX (ONLINE BIO FOULING MONITORING SYSTEM FOR CW SYSTEM)

ACCESSORIES FOR CLO2-RESIDUAL CHLORINE CLO2 ANALYZER FOR RW SYSTEM

ACCESSORIES FOR CLO2-OUTDOOR UPVC PIPING

ACCESSORIES FOR CLO2-TRIPPLE LAYER PIPING

MDCC Status Thermax Compare

Documents

Transcript of MDCC Status Thermax Compare