BBK34133 | Investment Analysis Prepared by Khairul Anuar L5 – Mergers and Acquisition.
MBF1923 | Econometrics · PDF fileMBF1923 | Econometrics Prepared by Dr Khairul Anuar L3...
Transcript of MBF1923 | Econometrics · PDF fileMBF1923 | Econometrics Prepared by Dr Khairul Anuar L3...
MBF1923 | Econometrics Prepared by Dr Khairul Anuar
L3 – Learning to Use Regression Analysis
www.notes638.wordpress.com
1
Steps in Applied Regression Analysis
• The first step is choosing the dependent variable – this step is determined by the purpose of the research (see Chapter 11 for details)
• After choosing the dependent variable, it’s logical to follow the following sequence:
1. Review the literature and develop the theoretical model
2. Specify the model: Select the independent variables and the functional form
3. Hypothesize the expected signs of the coefficients
4. Collect the data. Inspect and clean the data
5. Estimate and evaluate the equation
6. Document the results
2
Step 1: Review the Literature and Develop
the Theoretical Model
• Perhaps counter intuitively, a strong theoretical foundation is the
best start for any empirical project
• Reason: main econometric decisions are determined by the
underlying theoretical model
• Useful starting points:
– Journal of Economic Literature or a business oriented publication of
abstracts
– Internet search, including Google Scholar
– EconLit, an electronic bibliography of economics literature (for more
details, go to www.EconLit.org)
3
Step 2: Specify the Model: Independent
Variables and Functional Form
• After selecting the dependent variable, the specification of a model involves choosing the following components:
1. the independent variables and how they should be measured,
2. the functional (mathematical) form of the variables, and
3. the properties of the stochastic error term
4
Step 2: Specify the Model: Independent Variables
and Functional Form (cont.)
• A mistake in any of the three elements results in a specification error
• For example, only theoretically relevant explanatory variables should
be included
• Even so, researchers frequently have to make choices –also denoted
imposing their priors
• Example:
• when estimating a demand equation, theory informs us that prices of
complements and substitutes of the good in question are important
explanatory variables
• But which complements—and which substitutes?
5
Step 3: Hypothesize the Expected Signs of
the Coefficients
• Once the variables are selected, it’s important to
hypothesize the expected signs of the regression
coefficients
• Example: demand equation for a final consumption good
• First, state the demand equation as a general function:
(3.2)
• The signs above the variables indicate the hypothesized
sign of the respective regression coefficient in a linear
model
6
Step 4: Collect the Data & Inspect and
Clean the Data
• A general rule regarding sample size is ―the more observations the better‖
• as long as the observations are from the same general population!
• The reason for this goes back to notion of degrees of freedom (mentioned first in Section 2.4)
• When there are more degrees of freedom:
• Every positive error is likely to be balanced by a negative error (see Figure 3.2)
• The estimated regression coefficients are estimated with a greater deal of precision
7
Figure 3.1 Mathematical Fit of a Line to
Two Points
8
Figure 3.2 Statistical Fit of a Line to
Three Points
9
Step 4: Collect the Data & Inspect and
Clean the Data (cont.)
• Estimate model using the data in Table 2.2 to get:
• Inspecting the data—obtain a printout or plot (graph)
of the data
• Reason: to look for outliers
– An outlier is an observation that lies outside the range of the rest of
the observations
• Examples:
– Does a student have a 7.0 GPA on a 4.0 scale?
– Is consumption negative?
10
© 2011 Pearson Addison-Wesley. All rights reserved.
Step 5: Estimate and Evaluate the
Equation
• Once steps 1–4 have been completed, the estimation part
is quick
– using Eviews or Stata to estimate an OLS regression takes less
than a second!
• The evaluation part is more tricky, however, involving
answering the following questions:
– How well did the equation fit the data?
– Were the signs and magnitudes of the estimated coefficients as
expected?
• Afterwards may add sensitivity analysis (see Section 6.4
for details)
11
Step 6: Document the Results
• A standard format usually is used to present estimated regression
results:
(3.3)
• The number in parentheses under the estimated coefficient is the
estimated standard error of the estimated coefficient, and the t-value
is the one used to test the hypothesis that the true value of the
coefficient is different from zero (more on this later!)
12
Case Study: Using Regression Analysis to
Pick Restaurant Locations
• Background:
• You have been hired to determine the best location for the next
Woody’s restaurant (a moderately priced, 24-hour, family restaurant
chain)
• Objective:
• How to decide location using the six basic steps of applied
regression analysis, discussed earlier?
13
Step 1: Review the Literature and
Develop the Theoretical Model
• Background reading about the restaurant industry
• Talking to various experts within the firm
– All the chain’s restaurants are identical and located in suburban,
retail, or residential environments
– So, lack of variation in potential explanatory variables to help
determine location
– Number of customers most important for locational decision
Dependent variable: number of customers (measured by the
number of checks or bills)
14
Step 2: Specify the Model: Independent
Variables and Functional Form
• More discussions with in-house experts reveal three major
determinants of sales:
– Number of people living near the location
– General income level of the location
– Number of direct competitors near the location
15
Step 2: Specify the Model: Independent
Variables and Functional Form (cont.)
• Based on this, the exact definitions of the independent variables you decide to include are:
– N = Competition: the number of direct competitors within a two-mile radius of the Woody’s location
– P = Population: the number of people living within a three-mile radius of the location
– I = Income: the average household income of the population measured in variable P
• With no reason to suspect anything other than linear functional form and a typical stochastic error term, that’s what you decide to use
16
Step 3: Hypothesize the Expected Signs of
the Coefficients
• After talking some more with the in-house experts and
thinking some more, you come up with the following:
(3.4)
17
Step 4: Collect the Data & Inspect and
Clean the Data
• You manage to obtain data on the dependent and
independent variables for all 33 Woody’s restaurants
• Next, you inspect the data
• The data quality is judged as excellent because:
• Each manager measures each variable identically
• All restaurants are included in the sample
• All information is from the same year
• The resulting data is as given in Tables 3.1 and 3.3 in the
book (using Eviews and Stata, respectively)
18
Step 5: Estimate and Evaluate the
Equation
• You take the data set and enter it into the computer
• You then run an OLS regression (after thinking the model over one last time!)
• The resulting model is: Estimated coefficients are as expected and the fit is reasonable
• Values for N, P, and I for each potential new location are then obtained and plugged into (3.5) to predict Y
(3.5)
19
Step 6: Document the Results
• The results summarized in Equation 3.5
meet our documentation requirements
• Hence, you decide that there’s no need to
take this step any further
20
© 2011 Pearson Addison-Wesley. All rights reserved.
Table 3.1a
Data for the Woody’s Restaurants Example
(Using the Eviews Program)
21
© 2011 Pearson Addison-Wesley. All rights reserved.
Table 3.1b
Data for the Woody’s Restaurants Example
(Using the Eviews Program)
22
© 2011 Pearson Addison-Wesley. All rights reserved.
Table 3.1c
Data for the Woody’s Restaurants Example
(Using the Eviews Program)
23
© 2011 Pearson Addison-Wesley. All rights reserved.
Table 3.2a
Actual Computer Output
(Using the Eviews Program)
24
Table 3.2b
Actual Computer Output
(Using the Eviews Program)
25
Table 3.3
Data for the Woody’s Restaurants Example
(Using the Stata Program)
26
© 2011 Pearson Addison-Wesley. All rights reserved.
Table 3.3b
Data for the Woody’s Restaurants Example
(Using the Stata Program)
27
Table 3.4a
Actual Computer Output
(Using the Stata Program)
28
Table 3.4b
Actual Computer Output
(Using the Stata Program)
29
Key Terms from Chapter 3
• The six steps in applied regression analysis
• Dummy variable
• Cross-sectional data set
• Specification error
• Degrees of freedom