Maya Desk - Mocka€¦ · Maya Desk Assembly Instructions 9 mocka.co.nz | mocka.com.au Attach slide...
Transcript of Maya Desk - Mocka€¦ · Maya Desk Assembly Instructions 9 mocka.co.nz | mocka.com.au Attach slide...
A B C D E F G
H J K LI
Hardware Supplied
dowelx16
screwx4
boltx8
locking nut x8
screw x10
screwx12
nutx10
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
x1washer
Z
screwx1
Y
wall anchor
x1
X
SafetyStrap
W
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied.
Phillips & Flathead screwdriver and hammer required
Wall Strap
sliderail x1
sliderail x1
sliderail x1
sliderail x1
boltx10
M N
boltx2
dowelx2
O
dowelx2
Maya Desk
1mocka.co.nz | mocka.com.au
Assembly InstructionsThank you for your purchase. Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
1 2
Attach panel [15] to panel [7] while also attaching the safety strap (W) using 3x screws (J) as shown. Tighten with a screwdriver.
Attach 1x slide rail (F) to panel [6] using 3x screws (E). Attach 1x slide rail (G) ot panel [5] using 3x screws (E). Tighten with a screwdriver.
7
6
5
15
J
J
J
W
E
E
E
F
E
E
E
G
Maya Desk
2mocka.co.nz | mocka.com.au
Assembly Instructions
3 4
Insert 6x bolts (C) into panel [1]. Attach panels [4], [5] and [6] to panel [1] using 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a flathead screwdriver.
6
5
4
1
C
CC
C
C
C
A
A
A
A
A
A
D
D
D
D
D
D
1
D
Maya Desk
3mocka.co.nz | mocka.com.au
Assembly Instructions
5 6
Slide panel [9] down along the grooves between panels [4] and [5]. Attach panel [2] to panels [4], [5] and [6] using 6x dowels (A) and secure with 6x screws (J). Tighten with a screwdriver.
9
5
4
2
1
J
J
A
J
J
A
J
J
A
A 6
5
Maya DeskAssembly Instructions
4mocka.co.nz | mocka.com.au
Jolt WardrobeASSEMBLY INSTRUCTIONS
mocka.co.nz | mocka.com.au
7 8
Attach panel [3] to panel [2] using 3x screws (J) and tighten with a screwdriver.
Attach panels [7], [15] and [8] to panel [17] using 2x dowels (A), 4x bolts (K) and fasten with 4x nuts (L). Tighten with a flathead screwdriver.
8
73
2
15
17
J
J
J
K
K KK
L
L
L LAA
L
K
Maya DeskAssembly Instructions
5mocka.co.nz | mocka.com.au
9 10
Attach panels [3] and [5] to panel [17] using 1x dowel (N), 1x screw (M), 1x bolt (K) and secure with 1x nut (L). Tighten with a screwdriver.
Attach panels [7] and [15] to panel [16] using 2x dowels (A), 2x bolts (K) and secure with 2x nuts (L). Attach panels [3], [4] and [8] to panel [16] using 1x dowel (N), 1x screw (M), 3x bolts (K) and secure with 3x nuts (L). Tighten with a screwdriver.
85
4
3
17
16M
N
K
L
A
A M
K
KK
KLL
L
KL
N
15
157
7
17
3
Maya DeskAssembly Instructions
6mocka.co.nz | mocka.com.au
11 12
Insert 2x bolts (C) into panel [10].Tighten with a screwdriver. Insert 2x dowels (O) into panel [10]. Attach panel [11] and [12] to front panel [10] using 2x locking nuts (D). Tighten with a screwdriver.
Maya DeskAssembly Instructions
7mocka.co.nz | mocka.com.au
D
D
C
10
C
O
O10
11
12
Drawer Drawer
13 14
Slide panel [13] along the grooves between the side panels [11] and [12] to form the base of the drawer.
Attach panels [11], [12] and [14] as shown using 4x screws (B).Tighten with a screwdriver.
Maya DeskAssembly Instructions
8mocka.co.nz | mocka.com.au
BB
BB
13
11
1210
11
1210
13
14
Drawer Drawer
16
Insert the assembled drawer, ensuring it slides smoothly and easily along the rails. Lift the desk into the desired location, do not drag.
Maya DeskAssembly Instructions
9mocka.co.nz | mocka.com.au
Attach slide rail (I) and slide rail (H) to the underside of the side panels as shown. Secure with 4x screws (E) and tighten with a screwdriver.
15 Drawer
E
E
E
E
H
I
10
11
13
18
Use a drill to create a small hole lining up with the top of the safety strap (W). Fasten to wall using 1x wall anchor (X), 1x washer (Z) and 1x screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy!
XY
Zwall
anchor
screw
washerstrap
W
Maya DeskAssembly Instructions
10mocka.co.nz | mocka.com.au
Wall Strap17