May Newsletter - BHSEA · Ed served as Association Chairman in 2010/11 and more ... There were...
Transcript of May Newsletter - BHSEA · Ed served as Association Chairman in 2010/11 and more ... There were...
May 2018Birmingham Health, Safety & Environment Association BHSEA www.bhsea.org.uk
Introduction
Hazard Spotting
Presentations
Toolbox
News / Stop Press
Diary Dates
Links via icons or arrows
May2018
For further information: Liz Prophett Tel: 07881 290238; Email: [email protected]
Machinery Safety 1Kanwal Kanda, HM Principal Inspector, HSE
Lead and LagLinda Ley, Health & Safety Manager, Unipart
Logistics
Machinery Safety 2Anthony Bowmer, EEF
NewsletterSharing Learning Improving
May 2018Birmingham Health, Safety & Environment Association BHSEAGuests, New Members, New attendees
Guests
Phil Moran ‐
Safety Manager, Brintons
Carpets
Jane Burton – Head of Health and Safety, Brintons
Carpets
Natalie Fraser –
Contract Manager, Npower
New Attendees
Jake Winwood
–
Frameclad
Claire Iceton
–
Sandwell MBC
May 2018Birmingham Health, Safety & Environment Association BHSEA
Edwin (Ed) Friend -
In Memoriam
It is with great sadness that we report the death of Ed
Friend, a long‐time Association Member and stalwart. Ed fought bravely against a leukaemia related illness
for a long time but his interest in the wellbeing of
BHSEA and his wise counsel continued throughout.His membership and involvement with the Association
goes back to his early days as a Factory Inspector in the
Birmingham area, having moved from South Wales. Ed served as Association Chairman in 2010/11 and
more recently was instrumental in the vital process of
disposing of under‐utilised assets and getting the
Association onto a more secure financial footing.Ed did so much for the Association and his passion,
enthusiasm, humour and wit was widely recognised
and appreciated.His many anecdotes were always entertaining and
often amusing but usually with an important message.He will be missed and fondly remembered by so many.
May 2018Birmingham Health, Safety & Environment Association BHSEAWhat is good or not good? Any questions you wish to
ask?
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery ‐
Guard ‐
Modification
May 2018Birmingham Health, Safety & Environment Association BHSEAWhat is good or not good? Any questions you wish to ask?
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery ‐
Safety Switch ‐
Spare actuator / key
May 2018Birmingham Health, Safety & Environment Association BHSEAWhat is good or not good? Any questions you wish to ask?
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery ‐
Guarding
May 2018Birmingham Health, Safety & Environment Association BHSEA
Lead and LagLinda Ley, Health & Safety Manager, Unipart
Logistics
Key Points:Companies can become complacent if internal reports consistently
show no incidents or
accidents have occurred. There could in fact be near misses which no one has considered reporting.Keeping a record of Lead and Lag data can help to identify areas
of potential concern.Lead indicators are pro‐active and preventative actions ‐
easy to influence, hard to measure,
eg
safety briefings, behavioural observations.Lag indicators are re‐active actions – easy to measure, hard to influence, eg
over 3 day
incidents, minor injuries – no time lost.A points system is useful for recording both Lead and Lag data over a set period of time.It is important to thoroughly investigate any health and safety
incidents/accidents.The Fishbone Investigation Tool is an excellent method for getting to the root cause – it can
look at the Man, Machine, Material and Method ‐
eg
is the man properly trained and fit, has
the machine been properly serviced, are the materials in good condition, is the method
appropriate to the task and being properly followed.During your investigation don’t just look at what has been done wrong; look at what has
been done correctly, take statements and check records.
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery Safety 1 – Risk Management in Manufacturing
Kanwal Kanda, HM Principal Inspector, Field Operations, HSE
Key Points:The manufacturing sector represents around 9% of the GB workforce ‐
some 3 million people.It covers a diverse range of industry, eg
motor vehicle repair, woodworking, metal fabrication,
shipbuilding, aerospace ‐
some large employers but mostly SMEs.20% of all workplace fatalities occur within manufacturing and,
on average, 27 workers are
killed each year. There were 600,000 non‐fatal injuries in GB in 2016/17 ‐
44,000 of which
resulted from contact with moving machinery.The sector continues to be a priority for HSE – there is much room for improvement.Improvement is required in management systems and Risk Assessment (RA). RAs are
sometimes too narrow in approach and often produced by someone not acquainted with the
actual process rather than someone who is trained and competent.The RA should be a dynamic process, not one‐time‐only, and suitable and sufficient. It should
consider the task, location, how the job is actually done, risk control/guarding and cover
setting, operation, maintenance and cleaning.The new sentencing guidelines will be applied by the courts to assess culpability of those failing
in their duty to devise and implement effective systems to control risk and comply with the
law –
culpability is graded from Very High (deliberate breach of the law) to Low (minor
failing/isolated incident).Two case studies highlight the need to prevent access to dangerous and moving parts where
practicable.
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery Safety 2
Anthony Bowmer, HSS Consultant, EEF
Key Points:
The definition of workplace equipment is ‘any machinery, appliance, apparatus, tool or
installation for use at work’
‐
anything from simple hand or power tools to large pieces of
equipment or a complex production line.
It is vital to conduct a Risk Assessment in conjunction with the
people actually using the
equipment on a day‐to‐day basis –
ie
competent persons with the ability to operate, run and
maintain the equipment.
Ask the workforce for their opinions on what could go wrong and
how best to control the
risks.
Anthony’s presentation slides illustrate typical machine shop equipment
and invite you to
identify the most likely types of injury for each.
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery Safety
Example of Performance Standard (1)Performance
StandardScorecard
May 2018Birmingham Health, Safety & Environment Association BHSEAMachinery Safety
Example of Performance Standard (2)
May 2018Birmingham Health, Safety & Environment Association BHSEA
These included:•Failure to implement safe isolation procedures;•Failure to provide lock off devices and testing equipment referred to in the employer’s own method statement;•Failure to document changes to wiring plans and to ensure testing procedures were carried out;•Failure to ensure risk assessments were updated; and•Failure to ensure the effective management and supervision of health and safety.Michael's employer was found guilty of health and safety offences and fined £300,000. However, this provides little in the way of justice and nothing in the way of comfort for Michael's family. Telling his story will help ensure a lasting legacy from his untimely, unnecessary and entirely preventable death.
Michael Adamson was an experienced spark, who died on 4 August 2005 as the result of an electrical incident. He was only 26 years old and was engaged to be married. Like so many work-related deaths, it was an incident which could and should have been prevented. Motivated by the need to stop this from happening to others, Michael's story is told by his sister Louise.She talks through the catalogue of errors in health and safety management - any one of which would have been serious enough on its own – which accumulated to prove fatal.
http://www.michaels‐story.net/
May 2018Birmingham Health, Safety & Environment Association BHSEA
May 2018Birmingham Health, Safety & Environment Association BHSEA
Link
Lots of diagrams,
photos and checklists
May 2018Birmingham Health, Safety & Environment Association BHSEA
Link
May 2018Birmingham Health, Safety & Environment Association BHSEA
MOCK TRIAL 1st May 2018
MOCK TRIAL: A FREE EVENTfor small companies and others
Tuesday 1st May 09.00 – 15.00 Wolverhampton Science Park, WV10 9RQ
Management system?
Risk assessment?
Contractor management?
Safe System of work?
Information, instruction and
training?Supervision?
Guilty or Not Guilty?What’s your verdict?
A WWT Construction Industry sponsored event
An excellent event with
very positive feedback
Approx 100 delegates.
Particular thanks to:
HSE: Tony Mitchell, Edward
Fryer and Luke Bradley
Pinsent
Masons: Sean Elson,
Alex Hudson and Louise
Mansfield
Star witness: David Hughes
Mock Trial Tuesday 1st
May 2018A joint WWT / BHSEA Event
May 2018Birmingham Health, Safety & Environment Association BHSEA
Safety Groups UK StandRun by BHSEA* volunteers:
Mike Morton, Neil Boon, Enid Huggins, Paula Dufty,
Linda Ley, John Jones, Liz Prophett, George Allcock
NEC 10 – 12 April 2018
Promoting SGUK / Local GroupsNew member contact detailsNew speaker contact details
Follow‐up to all via email with
copy to Local Group(s)
New publicity and promotional posters and leaflets for prospective new members and speakers
* Birmingham Health, Safety and Environment Association
May 2018Birmingham Health, Safety & Environment Association BHSEAYou can help!
Please email [email protected]
May 2018Birmingham Health, Safety & Environment Association BHSEA
Make sure you confirm your attendance by contacting Liz ProphettTel: 07881 290238; Email: [email protected]
Everyone welcome
Sharing Learning Improving11th June 2018 12.45pm for 1.30pm –
3.45pmNational Metalforming
Centre ‐
B70 6PY (1 min from M5 j1)Links via icons or arrows
Introduction
Hazard Spotting
Presentations
Toolbox
News / Stop Press
Next event(s)
Legal Update including Case LawAlan Millband, Partner,
Howes Percival LLP
H & S Risk ProfilingJames Stapleton, Deputy H, S & Risk Manager , Loughborough University