MAX Wi-Fi Access Point Bracket...
2
WWW.SIEMON.COM MAX ® Wi-Fi Access Point Bracket Faceplate The Siemon MAX Wi-Fi Access Point Bracket Faceplate offers an easy, low-profile mounting and connection method for ceiling- mounted wireless access points (WAPs). This 2-port bracket faceplate is designed to be used with flat MAX outlets or hybrid Z-MAX ® outlets. Ideal for preparing drop ceiling tiles for future WAP deployments without having to re-enter the air handling space as required in many healthcare and other sensitive environments, the MAX Wi-Fi Access Point Bracket Faceplate easily mounts to standard electrical box single-gang US size mud rings and enables installation of Wi-Fi ceiling mount brackets. Low Profile Low-profile angled design eases patch cord routing and helps maintain bend radius. Aesthetic Apperance White power-coat fin- ish blends into ceiling. Faceplate mounts con- nectivity under WAP for a clean installation appearance. Installation Flexibility MAX or Z-MAX outlets can be installed from front or rear. Easy installation Mounting holes line up with standard single-gang mud rings and Wi-Fi ceiling mount brackets. Ceiling Bracket Ready The WiFi plate is compatible with many of the top AP manufactures ceiling brackets; including Cisco, Aruba and Juniper Mist. Simple and Effective Low-profile mounting option with built-in connectivity and patch cord routing for fast, easy Wi-Fi deployments. High Performance Accommodates Z-MAX Category 6A shielded outlets with PowerGUARD™ technology for advanced high-speed Wi-Fi and superior PoE support. Future Ready Supports two Category 6A outlets as recommended to achieve maximum throughput of advanced 802.11ac/ax Wi-Fi.
Transcript of MAX Wi-Fi Access Point Bracket...
W W W . S I E M O N . C O M
MAX® Wi-Fi Access Point Bracket Faceplate
The Siemon MAX Wi-Fi Access Point Bracket Faceplate offers an easy, low-profile mounting and connection method for ceiling-
mounted wireless access points (WAPs). This 2-port bracket faceplate is designed to be used with flat MAX outlets or hybrid
Z-MAX® outlets. Ideal for preparing drop ceiling tiles for future WAP deployments without having to re-enter the air handling space
as required in many healthcare and other sensitive environments, the MAX Wi-Fi Access Point Bracket Faceplate easily mounts to
standard electrical box single-gang US size mud rings and enables installation of Wi-Fi ceiling mount brackets.
Low ProfileLow-profile angled design eases patch cord routing and helps maintain bend radius.
Aesthetic ApperanceWhite power-coat fin-ish blends into ceiling. Faceplate mounts con-nectivity under WAP for a clean installation appearance.
Installation FlexibilityMAX or Z-MAX outlets can be installed from front or rear.
Easy installationMounting holes line up with standard single-gang mud rings and Wi-Fi ceiling mount brackets.
Ceiling Bracket ReadyThe WiFi plate is compatible with many of the top AP manufactures ceiling brackets; including Cisco, Aruba and Juniper Mist.
Simple and EffectiveLow-profile mounting option with built-in connectivity and patch cord routing for fast, easy Wi-Fi deployments.
High PerformanceAccommodates Z-MAX Category 6A shielded outlets with PowerGUARD™ technology for advanced high-speed Wi-Fi and superior PoE support.
Future ReadySupports two Category 6A outlets as recommended to achieve maximum throughput of advanced 802.11ac/ax Wi-Fi.
SS_WiFi_bracket_C.indd 1SS_WiFi_bracket_C.indd 1 3/17/20 4:33 PM3/17/20 4:33 PM
W W W . S I E M O N . C O M
North AmericaP: (1) 860 945 4200
India Middle EastP: (971) 4 3689743
EuropeP: (44) 0 1932 571771
Asia PacificP: (61) 2 8977 7500
Siemon Interconnect SolutionsP: (1) 860 945 4213www.siemon.com/SIS
ChinaP: (86) 215385 0303
Latin America P: (571) 657 1950/51/52
Because we continuously improve our products, Siemon reserves the right to change specifications and availability without prior notice.
SS
_MA
X_W
iFi_
RE
V._C
3/
20
Product Information
Ordering Information
Part Number Description
MX-WB1-02-02 ......... MAX 2-Port Wi-Fi Access Point Bracket Faceplate, White
SPECIFICATIONS
Length 116mm (4.57 in.)
Width 74.9 mm (2.95 in.)
Height 36.8 mm (1.45 in.)
Material Cold rolled steel
Material Compliance RoHS, lead free, halogen free, PVC free
Finish White Powder Coat
Color White (RAL 9003)
Compliance UL 1863
Outlet CompatibilityTERA®, Z-MAX® Hybrid UTP or Shielded, MAX® Flat UTP Outlets, MAX Blanks
Device CompatibilityCisco network device mounting bracket: AIR-AP-BRACKET-2
Juniper Mist (all indoor AP’s) removable bracket APBR-U
Aruba Wall/Ceiling mount bracket such as: AP-270-MNT-H2AP-220-MNT-W1W
Additional models may also be compatible. See mounting hole dimensions below
Mud Ring Mounting Holes Wi-Fi Bracket Mounting Holes(Threaded 6 - 32 Holes)
46.2 mm (1.82 in.)
116 mm (4.57 in.)
83.3 mm (3.38 in.) 83.4 mm
(3.28 in.)
16.5 mm (0.65 in.)
20.3 mm (0.80 in.)
74.9 mm
36.8 mm
Side View
SS_WiFi_bracket_C.indd 2SS_WiFi_bracket_C.indd 2 3/17/20 4:33 PM3/17/20 4:33 PM
