Max. 30 T - clas.com · 5 COMMON RAIL INJECTOR TESTER AC 5240 Covers most vehicles with Bosch...
Transcript of Max. 30 T - clas.com · 5 COMMON RAIL INJECTOR TESTER AC 5240 Covers most vehicles with Bosch...
DUAL-CONTROL PRESS 30T SLINDING CYLINDER
OH 0830
• Quick approach hydraulic pump• Chrome cylinder• Large manometer• Up and down the table is assisted by a winch• Handles for auto-centering the tableIncluded V block support, punches kit and protective shield
TMax.
30
SILENT-BLOCK UNIVERSAL EXTRACTION KIT OM 9388
Stepped end caps and numbered cylinders for easy identi� cation.
Composition:• 6 stepped end caps for cylinders: 34-36-38-40-42-44-
46-48-50-52-54-56-58-60-62-64-66-68-70-72mm• 4 threaded rods Ø10-12-14-16mm• 2 bearing
For the purchase of an OM 9388Available in L (AP 9026), XL (AP 9027), 2XL (AP 9028) and 3XL (AP 9029). Specify your size on the order. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
"EDEN PARK WORLD CUP" POLOStore price125 € VAT incl.
Valid offers from 04/01/2016 to 30/04/2016
2
BATTERY ELECTRICAL SYSTEM ANALYSER WITH DETACHABLE PRINTER AC 5244
Cable: 1800mmSuitable for start/stop
batteries
Instruction manual inside the device
Paper 55mm width (SA5245=2 rolls)
• For 12V SLI or AGM batteries• Rating: CCA-SAE-DIN-JIS-IEC-EN-CA• Allows to test: batteries, starters, grounding, alternators• Test report: results can be printed or transferred to a
computer (via supplied USB cable)
1.8
MULTICHARGER STATION 4 CHANNEL OE 2040
Characteristics:• Charging capacity: 10-80Ah• Voltage: 230V, 50-60Hz• On/off switch• Power: 240W• Charging voltage: 12V• Type of batteries: SLI, AGM, PL, WET, CA• Current: 5A (x4)• Lenght of cables, clips included: 1830mm• Dimensions: 350x190x75mm• Weight: 2.5kg
1830
Protections of embedded electronics, charger, batteries and user:• No voltage in the clips if they are not connected to the battery• Protection against overloads• Protection against electrical shorts• Spark-system• Protection against polarity reversals
3
SET OF PULLERS FOR EXTRACTING CONNECTION PLUGS
OM 2002
DIGITAL MULTIMETER OE 3004
Light at the top
Characteristics:• DC voltage: 200mV-2V-20V-200V-250V• AC voltage: 200mV-2V-20V-200V-250V• DC current: 20mA-200mA-10A• AC current: 20mA-200mA-10A• Resistance: 200ohm-2kohm-20kohm-200kohm-2Mohm-20Mohm• Diode test: approx. 2.8V• Temperature: 0-1000°C• Battery test: 1.5-9-12V• Continuity: <30ohm
1
AMMETER CLAMP 1000A OE 5020
• IEC-61010 CATII with overload protection• 3 1/2-digit backlight 16mm large LCD• Automatic scales• Comes with battery and test lead
Technical datas:• DC voltage: 600V±(0.5%+5)• AC voltage: 600V±(1%+5)• Direct current: 200/1000A±(2.5%+5)• Alternating current: 200/1000A±(2.5%+5)• Resistance: 200 ohms±(1.2%+5)• Frequency: 2kHz±(2%+5)• Power supply: 9Vx1• Dimensions: 250x100x46mm• Weight: 365g
• Intensity test• Amperemeter test• Diode test• Continuity test• Data-hold function
1
12V RELAY TESTER AC 5111
Suitable for 4 or 5 pin relays
• Power surge protection• Suitable for diode relays• LED result display• Test voltage 12V• Powered with croco clips
Lets you test electromechanical relays fast and accurately. Saves operator time and gives a reliable diagnosis.
Valid offers from 04/01/2016 to 30/04/2016
4
DIESEL ENGINE COMPRESSION MASTER TEST KIT AC 2016
Common-rail & HGV dummy injectors with clamps
Covers 90% of vehicles + common-rail injection systems
• Fast connection adapter• 355mm line for dif� cult access• 0/70bar pressure gauge
Complete kit for all direct and indirect injection diesel engines
COMPRESSION MEASURING KIT FOR DIESEL ENGINES AC 0224
Composition:• AC2024: diesel glow plug kit• AC 0200: diesel compression gauge
Easy and ready to use, this kit covers 90% of vehicles.Applications available on request.
DAMAGED GLOWPLUG EXTRACTION SET M8-M10
OM 3778
Contents:• Top connection removal Torx socket • Pilot drill centring sleeves (2pcs) & Pilot drills Ø3.5mm (2pcs)• Dual-size step drill M10 (Ø9x4mm)• Dual-size step drill M8 (Ø7x4.2mm)• Drill holding adaptor• Tap 1/4"• Tap M8• Tap M10• Ratchet T-Bar• SA5334: force screw (2pcs)• Puller adaptor mandrels
For the purchase of an OM 3778Available in L (AP 9026), XL (AP 9027), 2XL (AP 9028) and 3XL (AP 9029). Specify your size on the order. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
"EDEN PARK WORLD CUP" POLOStore price125 € VAT incl.
5
COMMON RAIL INJECTOR TESTER
AC 5240
Covers most vehicles with Bosch Denso, Delphi and Siemens Common Rail injectors (not Opel).This set can detect � ow problems in injectors.
INERTIAL INJECTOR EXTRACTOR BOSCH/DELPHI OM 4022
Supplied with extender, 3.5kg weight
Allows fast and effortless extraction of the blocked injectors in the cylinder head.Internal grip 16mm
COMPLETE INJECTOR SEAT CLEANING KIT
OM 9100
Contents:• OM9280: 1 injector gasket extractor • 1 reamer support• SA9100: 1 brush drive line• SA9110: 2 small diameter injector well
brushes
• SA9111: 2 large diameter injector well brushes
• 1 brush support• 6 injector well plugs• 2 � at reamers Ø17mm• 1 conical reamer Ø17mm
UNIVERSAL INJECTOR MECHANICAL-HYDRAULIC EXTRACTION KIT
OH 0027
Composition: • 4 releasing wrenches for the electromagnetic part (Ø25-27-29-30mm)• OM 9277: 1 releasing hex wrench for electrodes Ø10mm• 4 traction bolts (M18x1.5-M17x1 Bosch, M18x1.5-M14x1.5 Delphi,
M18x1.5-M27x1 Siemens Piezo, M18x1.5-M25x1 Siemens Piezo)• SA2700: Mechanical-hydraulic ram 12T• Attachment and assembly accessories
TMax.
12
For the purchase of an OH 0027Dimensions : 70x29x40cm. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
BLACK BLANCO BRANDED TROLLEY BAG "URBAN PARK" Store price275 € VAT incl.
Valid offers from 04/01/2016 to 30/04/2016
6
MASTER TIMING TOOL SET RENAULT/NISSAN/OPEL/VOLVO
OM 6100
OEM codes and applications in detail : p134 in general catalogue 2015-2016.
MASTER TIMING TOOL SET PSA OM 6200
OEM codes and applications in detail : p140 in general catalogue 2015-2016.
MASTER TIMING TOOL SET VAG OM 6300
OEM codes and applications in detail : p152 in general catalogue 2015-2016.
For the purchase of an OM 6100 or OM 6200 or OM 6300
Available in M (AP 9060),L (AP 9061), XL (AP 9062), 2XL (AP 9063) and 3XL (AP 9064). Specify your size on the order. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
BLACK POLO SHIRT WITH GREY COLLAR+ELBOW PAD Store price59 € VAT incl.
7
7 DRAWERS TIMING TOOL TROLLEY RENAULT/PSA/VAG OM 9898
Components cleary identi� able available retail
Composition:• EG0085: 7 drawers tool roller cabinet • OM6100: timing tools Renault/Nissan/Opel/Volvo • OM6200: timing tools PSA • OM6300: timing tools Ford/VAG
MULTI-BRAND 7 DRAWERS TIMING TOOL TROLLEY OM 9899
Components cleary identi� able available retail
Composition:• EG0085: 7 drawers tool roller cabinet • OM6100: timing tools Renault/Nissan/Opel/Volvo • OM6200: timing tools PSA • OM6300: timing tools Ford/VAG • OM6400: timing tools Fiat/Alfa/Lancia/Opel/Suzuki/Ford • OM6500: timing tools Opel/Chevrolet/Saab/Fiat/Lancia/Suzuki/Ford • OM6600: timing tools Ford/VW/Seat/Mazda/Volvo
For the purchase of an OM 9899 or OM 9898
Dimensions : 70x29x40cm. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
BLACK BLANCO BRANDED TROLLEY BAG "URBAN PARK"
Store price275 € VAT incl.
Valid offers from 04/01/2016 to 30/04/2016
8
CLUTCH ASSEMBLY/DISASSEMBLY OM 0619
Made in France
Applications:AudiBMWChevroletDaewooFiatFordHondaHyundai
KiaLand RoverMazdaMercedesMitsubishiOpel/VauxhallPorschePSARenault/Nissan
SaabSuzukiToyotaVolvoVW/Skoda/Seat
If you need more details, please contact us.
DUAL CLUTCH SYSTEM (DCS) ALIGNER TOOL SET OM 0627 Constructor's warranty
preserved
For OM 0619
OEM codes and applications in detail : please contact us.
ASSEMBLY/DISASSEMBLY SELF-LOCKING TIE-ROD WRENCH Ø28-35mm OM 9174
Characteristics:• Hardened steel rollers• 1/2" + 27mm Hex drive for more power• Body length: 400mm• Head Ø: 74mm• Weight: 1.550kg
This tool is designed to remove the axial joint rod from the steering rack measuring 28 to 35mm diameter.The head is composed of a cage with three hardened steel rollers. The speci� c design of the head combined with the rotation of the tool causes the rollers self-lock between the body and the axial joint allowing screwing or unscrewing.
This tool is designed to remove the axial joint rod from the steering rack measuring 35 to 45mm diameter.The head is composed of a cage with three hardened steel rollers. The speci� c design of the head combined with the rotation of the tool causes the rollers self-lock between the body and the axial joint allowing screwing or unscrewing.
ASSEMBLY/DISASSEMBLY SELF-LOCKING TIE-ROD WRENCH Ø35-45mm OM 9274
Characteristics:• Hardened steel rollers• 1/2" + 27mm Hex drive for more
power
• Body length: 400mm• Head Ø: 74mm• Weight: 1.930kg
Essential to perfectly align dual clutch systems.Fast and effortless operation, covers 90% of vehicles equiped with DCS clutches.
9
FRONT END EXERCISE LEVER OM 8096 Save time with impact
wrench
• Very quick to use: usage with impact wrench• Removal operation with a 3 position belt that grants safety and
avoids damages to the swinging arms• Sliding pad to � t every underbody• Universal, suitable for many cars and commercial vehicles
Lever made up of:• 1 arm + pad for support under the body• 1 articuled traction arm• 2 belts• 1 traction screw for impact wrench
FRONT END DOUBLE EXERCISE LEVER OM 8097
2 in 1
• Save time using impact wrench• Removal operation with a 3 position belts that grants safety and avoids damages
to the swinging arms• Sliding pads to � t every underbodyUniversal, suitable for many cars and commercial vehiclesWeight : 11kg
Lever made up of:• 1 arm + 2 pads for support under the body• 2 articuled traction arms• 2 belts• 2 traction screws for impact wrench
UNIVERSAL ENGINE SUPPORT LV-CV OM 7200
Essential for working alone on gearboxes, water pumps, brake pads, etc.
• Articulated head on ball joint 350kg• Extensions 630-960mm• Rubber covered• Height adjustable• Weight: 7.20kg
kgMax.
350
Store price59 € VAT incl.
For the purchase of an OM 8097 or OM 7200Available in M (AP 9060),L (AP 9061), XL (AP 9062), 2XL (AP 9063) and 3XL (AP 9064). Specify your size on the order. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
BLACK POLO SHIRT WITH GREY COLLAR+ELBOW PAD
Only one quick installation to work on both front end.
Valid offers from 04/01/2016 to 30/04/2016
10
COOLING SYSTEM TESTER AC 1000
Plugs sold retail
Pump equipped with a pressure relief valve
Allows circuit to be pressurizedQuick connect, fully watertight plugs Range of plugs with latest models for all commercial vehicles and most HGVAllow immediate detection of circuit condition and cause of the leak (cuffs, sleeves, cylinder head gasket, etc...)Pump and plugs sold retail
COOLING LINE FILLING DEVICE AC 1104
Pressure loss system that forces fast total re� lling of the circuit.Compressed air is used to empty the system.Supplied with 3 rubber bush suitable for radiator from Ø31mm to 52mm.The tool requires the system to have been emptied.
TRANSFER PUMP FOR DRUMS 200L HU 0011
• Extending tube to reach the bottom of drums
Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel, anti freeze and washer � uid from standard 200l drums.
ROTARY PUMP SUITABLE FOR ADBLUE
HU 0013
• Supplied with a 2" bsp � tting• 0.3 litre per revolution • Inlet tube 1000mm
A composite material has been supplied speci� cally to reduce the staining from adblue. also suitable for other � uids like water, diesel, oil...
11
SET OF 30 CAP OIL FILTERS FOR MULTI-BRAND
HU 1999
Spanner available retail ,see p.388 in cataloge 2015-2016
This oil � lter spanner set lets you dismantle immersed � lters as well as traditional � lters.
15l GREEN OIL DRAIN PAN HU 3015
• Upper diameter: 45cm• Bottom diameter: 37cm• Length: 57cm• Height: 14cm
The drain pan is ideal to work out of a lift or when the procedure requires that the vehicle has wheels on the ground.Examples: when removing oil � lters, a hose or even to make a drain.Being provided with carry handles, it is very simple to transfer the � uid contained to the collecting tank proper.
15
ARTICULATED RATCHET CROWS FOOT OIL FILTER WRENCH 27mm HU 2263
Time saver
1/2" D.
Engines: 2.0-2.2 HDI/TDCICodes: DW10C, DW12C
Applications:C-Max (from 2010/04), Focus (from 2010/07), Galaxy (from 2006/03), Kuga (from 2008/02), Mondeo (from 2007/02), S-Max (from 2006/03), 2.0L Duratorq TDCI diesel, 2.2L Duratorq TDCI dieselCitroën: C4, Picasso, Grand Picasso, C5Peugeot: 308, 3008, 508, 5008, 407, RCZ
This wrench allows the oil � lter removal of the FORD DURATORQ TDC engines.U-shaped, this tool is designed to make the operator's job easier.Reversible ratchet 27mm.
Valid offers from 04/01/2016 to 30/04/2016
12
MOBILE WASTE OIL SUCTION 70l HU 0059
Includes copper and PVC probes (shank Ø: 12.2mm)
• Gravity draining• Vacuum draining• Air inlet pressure: 8 to 10bar• Collection bowl capacity: 20l• Transparent bowl capacity: 10l• Suction rate: 1.5 to 2l/min• Air pressure for oil discharge: 1 to 2bar• Oil level indication• H. maxi: 1680mm• Dimensions : 500x420x890mm
70
MOBILE WASTE OIL SUCTION 70l HU 0049
• Gravity draining• Vacuum draining• Collection bowl capacity: 15l• Air inlet pressure: 8 to 10bar• Suction rate: 1.5 to 2l/min• Air pressure for oil discharge: 1 to 2bar• Oil level indicator• Max. height: 1680mm• Dimensions: 500x420x890mm• Includes copper and PVC probes (shank
Ø: 12.2mm)
70
MOBILE WASTE OIL SUCTION 70l HU 0039
• Venturi design• Air inlet pressure: 8 to 10bar• Suction rate: 1.5 to lL/min• Air pressure for oil discharge: 1 to 2bar• Oil level indicator• Dimensions: 500x420x890mm• Includes copper and PVC probes
(shank Ø : 12.2mm)
70
70l WASTE OIL DRAINER GREY HU 0079GR
Spare parts available retail
Oil tray: 15lØcontainer : 420mm
Total container capacity: 640mm
• Tank capacity: 70l• Air pressure for oil discharge:
1-2bar/14-28psi• Standard: tool plate+stand for scroll• 4 wheels (2 swivel wheels)• Min height: 1100mm• Max height: 1680mm
70
13
MOBILE OIL DISTRIBUTION BARREL 180-220kg HU 0613
Contents:• HU0614: volumetric oil gun 1/2"• HU0615: pneumatic oil pump + suction tube for 180-220kg drums• HU0616: 180-220kg drums trolley
4 kgMax.
220
Galvanized steel frame trolley for drums from 180 to 220kg. Comes with 2 � xed front castors and 2 swivelling rear castors with brakes.Its adjustable chain for securing the drums, pump bracket and gun hook, allows to work and store it safely.
FLUID COLLECTION CONTAINER HU 0031
Dimensions: 780x495x120mmMax. wheelbase :920mmCapacity max: 35 litersEquipped with 4 swiveling wheels2 carry handlesPouring spout
35
DRAIN PAN FOR FLUIDS H.80mm HU 0950
30
1300mm
900mm
1250
mm
Stands for vertical storage
Drain valve
Valid offers from 04/01/2016 to 30/04/2016
14
COIL SPRING COMPRESSOR SET OM 1170
Do not use an impact wrench
Contents: • Capacity 1050kg/10200Nm compressor • Max opening of cups 310mm, closure 110mm• 3 different cups with protection: Ø65-152mm, 88mm-160mm, 126mm-
212mm• Cup extender• Tools for cups replacement (screw, allen key)
Spring compressor for "MCPHERSON" type struts, with interchangeable cups.
TMax.
1
23 PCS PNEUMATIC BRAKE CALIPER REWIND SET OP 4505 Comes in box
For left or right handed threaded pistons
This kit includes a pneumatic gun, the traditional adaptors and all the latest adaptors for:• VW Passat (from 2005)• Ford• Iveco Daily• BMW• Mini/BMW• Renault Laguna III/ Scénic III• Renault Master III
kgMax.
150
PNEUMATIC BRAKE AND CLUTCH BLEEDER HU 1109
Supplied with:• 5 metal plugs• 2 brake oil recovery jerricans
• Pneumatic operation• Comes with antifoaming rubber membrane• Air reserve in the bottom part of the tank• 5-litre capacity allows it to be used repeatedly• Fast-connector hose• Balanced carrying handle• Pressure control gauge• Plug rack• Compatible with DOT3/ DOT4/DOT5/DOT6 /Pentosin/
LHM/LHS
5
For the purchase of an HU 1109Available in L (AP 9026), XL (AP 9027), 2XL (AP 9028) and 3XL (AP 9029). Specify your size on the order. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
"EDEN PARK WORLD CUP" POLO Store price
125 € VAT incl.
15
REINFORCED PNEUMATIC SPRING COMPRESSOR (2.4T) OP 3220
Fall protection Equipped with an air supply contact breaker at the opening of the grid.
• Height: 1600mm• BaseLength: 500mmWidth: 300mm• Working pressure6bar/max 10bar• Use and maintenance instruction book.• Grey
• Weight 70kg• Allocation:1 GM cup Ø125 to 205mm1 GM cup Ø78 to 130mm• Standards 2006/42CE• Technical data on request
TMax.
2.4
PNEUMATIC COMPRESSOR CERTIFIED VERITAS OP 2030
COMPLIES WITH MACHINE DIRECTIVE 2006/42CE
Fall arrest support
Equipped with an air supply contact breaker at the opening of the grid.
Characteristics:• Height: 1400mm• Base: Length: 650mmWidth: 400mm• Working pressure: 6bar/max. 8bar• Compression strength 1226Kg• Use and maintenance instruction book.• Blue• Weight 62Kg• Allocation:1 GM cup Ø125 to 205mm1 GM cup Ø78 to 130mm• Standards 2006/42CE
TMax.
1.2
For the purchase of an OP 3220 or OP 2030
Dimensions : 70x29x40cm. In case of stock shortage, CLAS reserves the right to replace with a similar value item.
BLACK BLANCO BRANDED TROLLEY BAG "URBAN PARK"
Store price275 € VAT incl.
Compression strength 2452kg
Valid offers from 04/01/2016 to 30/04/2016
16
AUTOMATIC TYRE CHANGER 10"-24" DM 1000
Comes with:• OP0049: Eurodainu pressure gauge (complies with 86/217/EEC.
Standard UNIEN 12645)• SA8902: 5 protection covers• SA8903: 5 clips protection covers• SA8904: blade protection cover• SA8906: set of 4 jaw covers• OM0255: L.495mm lever with protection for alu rims
Characteristics:• Roller-supported horizontal arm• Max. wheel diameter: 1180mm• Tyre width: 3-12"• Turntable with anti-pinch device• Outside clamp: 10-21"• Inside clamp: 12-24"• Turntable rotation speed: 6.5rpm• Ergonomic foot pedal• Adjustable 2 positions bead breaker blade with protection and double acting
cylinder• Working air pressure: 8-10bar• Air cleaner and oil lubricator• Tubeless in� ator safety valve: 3.5bar• Sound level < 70 dB• Power supply voltage: 400V-50Hz• Power: 0,85-1.1kW• Bead breaker arm power: 2500kg• Tyre changer weight: 248kg• Dimensions: 1900x1580x2000mm
HELPER ARM DM 1100
For DM 1000/DM 2000
Control systemArticulated and adjustable arm to facilitate bead positioningUpper bead protecting roller for 4x4 and Run � atSupport cone for positioning the internal gripRotating disk made to facilitate the removing of the 2nd bead3 storage holder
Demounting operation: the bead pusher presses the upper bead into the drop centre of the rim so that it can be easily levered over the mounting head nose and easily demounted.Mounting operation of the upper bead: the roller retains the bead under the mounting head nose. The bead pusher follows rotation of the wheel, doing the laborious job of the operator, tyre and rim are preserved.This pneumatic arm is a real help for mounting and demounting tyres such as low pro� le tyres and run � at tyresystems.
17
SEMI-AUTOMTIC TYRE CHANGER 10"-21" DM 0500
Comes with: • SA8902: 5 protection covers • SA8903: 5 clips protection covers • SA8906: set of 4 jaw covers • OM0255: L.495mm lever with protection for alu rims
Characteristics: • Tyre width: 3-12" • Outside clamp: 10-18" • Inside clamp: 12-21" • Turntable rotation speed: 6.5rpm • Ergonomic foot pedal • Working air pressure: 8-10bar • Air cleaner and oil lubricator • Tubeless in� ator safety valve: 3.5bar • Power supply voltage : 230V • Power : 0.85-1.1kW • Bead breaker arm power : 2500kg • Weight : 177kg
Semi automatic tyre changer designed for an effortless mounting and removal of tyres. Suitable for cars, commercial vehicles and 4x4 tyres.
SEMI AUTOMATIC WHEEL BALANCER EQ 1000
Comes with:• 4 counterweights from 40 to 137mm: SA8408: centering cone Ø40-62mm Ø40mm SA8409: centering cone Ø54-81mm Ø40mm SA8410: centering cone Ø70-98mm Ø40mm SA7849: centering cone SUV Ø95-137mm Ø40mm • SA8305: rim width caliper• SA8905: calibration weight 50g• OC8034: tyrepliers• EQ8404: fast nut Ø40x4mm with bowl/joint/compression ring
Characteristics:• Power supply voltage: 220V-50Hz• Motor power: 90W• Wheel balancer weight: 149kg• Dimensions (wheel guard opened): 1550x1160x1490mm• Sound level < 69dB• Digital display (automatic standby mode if the machine is
not being in use after 5min)• Max. wheel diameter: 1100mm• Max. wheel weight: 70kg• Rim diameter: 1-28"• Rim width: 1.5-20"• Wheel 3 parameters manual measurement• Automatic wheel guard• One balance time: 7s• Rotating speed: 140rpm• Shaft: L.210mm-Ø40mmx4mm• Ergonomic and functional weight holder top with large trays
for different types of counterweights and tools.• 4 storage media• Support of positioning weight
Wheel balancer designed for quick, easy and precise interventions on cars, commercial vehicles and 4x4.
Valid offers from 04/01/2016 to 30/04/2016
18
JACK STANDS 3T (x2) OM 3003
Characteristics:• H. mini: 295mm• H. maxi: 425mm
TMax.
3
PIT JACK 600kg OH 0266
• Foot control• Chromed rod• Overload safety• Command lower :type deadman• 4 castor wheels
kgMax.
600
PIT JACK 300kg OH 0263
• Foot control• Chromed rod• Overload safety• 4 swivelling wheels
kgMax.
300
1T LOW PROFILE FOLDABLE CRANE OH 0335
• Double acting pump• 360° swivelling pump• Deadman lowering control• 3 positions arm: 1000-750-500kg• Low pro� le: 85mm• Nylon wheels
TMax.
1
19
LOW PROFILE SERVICE GARAGE JACK 2.5T+JACK STANDS 3T
OH 3433
+
+ LIFTING PACK GARAGE FLOOR JACK 3T + JACK STANDS 3T
OH 4333
TMax.
3
Deadman lowering control
Magnetic base
• Foot pedal with rubber pad• Safety overload system• Swivelling saddle• Double nylon front casters• H. mini: 76mm• H. maxi: 510mm• Dimensions: L.1006xl.365xH.136mm• Weight: 42kg
EXTRA LOW PROFILE SERVICE GARAGE JACK 2T 76mm
OH 6020
TMax.
2
Deadman lowering control
Magnetic base
• Safety overload system• Foot pedal with rubber pad• Swivelling saddle• Double nylon front casters• H. mini: 80mm• H. maxi: 500mm• Dimensions: L.822xl.420xH.232mm• Weight: 50kg
EXTRA LOW PROFILE SERVICE GARAGE JACK 3T 80mm
OH 6030
TMax.
3
Contents:• OH6014: Extra low pro� le service garage jack 2.5T 75mm• OM3003: Jack stands 3T (x2)
Contents:• OH5303: Garage � oor jack 3T• OM3003: Jack stands 3T (x2)
Valid offers from 04/01/2016 to 30/04/2016
20
1/2" IMPACT WRENCH 1356Nm OP 1402
For working on the chassis (hubs, wheels, cradles) of
commercial vehicles Characteristics:• Max torque: 1356Nm• Release torque: 1054Nm• Speed: 7.000rpm• Length: 183mm• Noise level: 83dB• Connection: 1/4"• Supply pressure: 6.2bar• Consumption: 113l/min• Net weight: 1.9kg
MINI IMPACT WRENCH 1/2" 678Nm OP 1512
Short lenght of 120mm
Characteristics:Maximum torque: 678NmSpinning speed: 11000rpmVibration: 10m/sSound level: 90dBConnection: 1/4"Suggested hose Ø: 10mmPressure: 6barConsumption: 113l/minNet weight: 1.58kg
Ø10mm REVERSIBLE DRILL OP 1450
Characteristics:• Motor: 0.5cv• Speed: 1800rpm• Length: 185mm• Noise Emissions: 83dB• Connector: 1/4"• Supply pressure: 6.2bar• Consumption: 113l/min• Net weight: 1.1kg
MULTI-SERVICE BRUSH OP 1210
Supplied with brush and support
Characteristics:• Speed: 3.500rpm• Length: 280mm• Noise level: 83dB• Connection: 1/4"• Supply pressure: 6.2bar• Consumption: 110l/min• Net weight: 1.2kg
21
MINI ANGLE DIE GRINDER Ø6mm OP 1205
Characteristics:• Speed: 20.000rpm• Angle: 115°• Length: 194mm• Noise level: 77dB
• Connection: 1/4"• Supply pressure: 6.2bar• Consumption: 113l/min• Net weight: 0.5kg
HYDROPNEUMATIC MOBILE LIFTING COLUMN 1500kg OH 9150
SA9151: Lifting by the wheelMax working height: 735mmMin height: 100mmWheel diameter from 480 to 730mm
• 2 handlegrip and 2 swivel wheels to ease handling• Safety pin : 5 secure heights• Lifting by the wheel or the car body• Dimensions: L.94xl.71xH.126.5cm• Weight: 104kg
Mobile and practical.
kgMax.
1500
DUAL LASER HEADLIGHT ADJUSTMENT DEVICE AC 2013
Aluminium column in two pieces
TECHNICAL DATAS• Width: 580mm• Lenght: 712mm• Height: 1810mm• Weight: 20kg• Supply voltage: 9V DC• Field of light intensity reading: 0-150klux/1m 0-240lux/25m• Vertical deviation: 0-4%• Horizontal orientation: ±
5cm/10m
• Laser pointing• Digital luxmeter• Sliding mechanism• Inclination setting• Thermoplastic optical box• Automatically check and measure headlamp misalignments and
measure light power regardless of type of lamp (xenon, halogen, led, etc.)
Valid offers from 04/01/2016 to 30/04/2016
22
MICROGRAIN PNEUMATIC SANDBLASTING BOOTH OP 0618
Characteristics:• Glazed access hatch• Hatch protective � lm• Neon interior light• Reinforced rubber handing gloves• Compatible with abrasives: microbead glass,
corindon, shot, plastic media • Gun supplied with 4 ceramic nozzles
HOT STAPLER OC 6048
Supplied with SA6048, SA6049 and SA6050 (3x100 staples)Staples width: 13mm
The electronic box has three temperature settings depending on the importance of the repair.
VEHICLE DOLLY CASTER SYSTEM 1360kg (PAIR) OM 2024
• Hydraulic ram• Aluminium roller L.300mm• 4 casters, 2 with lock• Capacity : 2720kg (4 jacks)
kgMax.
1360
This sandblasting booth is ideal for microblasting average sized parts.Hooked up to the workshop’s air system, it allows you to blast abrasives for cleaning, restoring, and making parts look like new.
The hot plastic repair technique is an effective way of reinforcing and repairing broken or cracked plastic parts (windscreens, headlamps, trim...).
23
Plastic case
Plastic case with casters
AUTO DENT REPAIR KIT WITH SLIDE HAMMER OC 0112
Content: • 1 inertial stainless steel hammer+pulling end• 1 pulling lever (DSP) to remove dents• SA4205: 1 glue gun 240V-200°C-30W• 8 glue sticks• 9 pulling tips of various diameters• 1 nylon chisel to remove the pulling tips• 1 bottle for solvent (empty) to remove the pulling tips• 1 strong PVC box
1.5
4T COLLISION REPAIR SET OC 0801
Contents:• SA0805: 4T hydraulic ram• SA0806: 4T 1/4" hydraulic hand pump• SA0804: spreader 500kg• SA0802: hose 1/4"• Quick lock• 4 extensions: 100-200-300-400mm
TMax.
4
10T COLLISION REPAIR SET OC 0802
Contents:• SA0807 : 10T hydraulic ram• SA0808 : 10T 1/4" hydraulic hand pump • SA0804 : spreader 500kg• SA0802 : hose 1/4"• Quick lock• 4 extensions: 100-200-300-400mm
TMax.
10
This kit is designed to repair the car bodies that suffered hail, or small dents, no need to repaint the part.The process consists in sticking plastic pulling tips with the gun and the glue especially made for bodywork, and to connect the inertial weight or the pulling lever and then have the painted sheet without damaging it. Then you can remove the pulling end with any cleaning solvent (not supplied) and the nylon chisel.
Valid offers from 04/01/2016 to 30/04/2016
24
THIN CORDLESS RECHARGEABLE LIGHT OE 0141
• 12 LED SMD• Battery Li-ion 3.7V-2200mAh• Light intensity 400 lumens• Charge time : 4h• Battery life : 4h• Mains charger and cigarette-lighter charger + USB charger• Base support• Charge indicator• Light dimensions: L.38xl.27xH325.mm
RECHARGEABLE 120SMD LED LIGHT LAMP OE 0168
• Adjustable aluminium frame 111-180cm• 180° light spread• Battery: 3.7V 4400mAh Li-ion• Light intensity: 750 lumens• Charge time: 5.5h• Battery Life: 3h• Charger: 230V 1A • Weight: 1kg
RECHARGEABLE COB LED PROJECTOR OE 0291
For OE 0180
• Aluminium body with rubber edge protection• 180° nylon swivel stand • COB LED 20W• Battery: 11.1V 4400mAh Li-ion• Light intensity: 2 modes (400-1800 lumens), 5700K• Charge time: 5h• Battery Life: 8h in 400Lm mode, 2h in 1800Lm mode• Charger: 100-240V AC• Dimensions: L.70xl.225xH.220• Weight: 1.8kg
TRIPOD PROJECTOR SUPPORT OE 0180
For OE 0170/OE 0291
Mini. height 720mmMaxi. height 1300mm
New generation "Super Bright LED" light.Shock and hydrocarbon-resistant protective rubber structure.This light is equipped with a strong magnet.