Mattel Loopz Speaker Replacement · · 2018-03-27Mattel Loopz Speaker Replacement This guide will...
Transcript of Mattel Loopz Speaker Replacement · · 2018-03-27Mattel Loopz Speaker Replacement This guide will...
Mattel Loopz Speaker ReplacementThis guide will show you how to replace a faulty speaker in the Mattel Loopz game.
Written By: Trevor Lasiter
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8
INTRODUCTION
This guide will show you how to properly replace the speaker for the the Mattel Loopz interactivegame.
TOOLS:Phillips #2 Screwdriver (1)
Phillips #1 Screwdriver (1)
Soldering Station (1)
Spudger (1)
PARTS:AA Batteries (4)
Speaker (1)
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8
Step 1 — Batteries
Use a No. 2 Phillips headscrewdriver to take out the 1/4"screw that holds the battery cover inplace on the bottom of the device.
Step 2
Take out the 4 AA Batteries.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8
Step 3 — Speaker
Remove red screw covers (13 total)using spudger.
Step 4
Remove the thirteen 12.7mm screwswith a #1 Phillips screwdriver.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8
Step 5
Remove 6 white caps using spudgerto reveal screws underneath.
Step 6
Remove the six 16mm screws with a#1 Phillips screwdriver.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8
Step 7
Remove the white cover. Be sure toremove the front and the back.
Step 8
Remove the black, plastic cover toreveal the internal electronics asshown.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8
Step 9
Remove the two 6.4mm screws witha #1 Phillips screwdriver.
Step 10
Remove the speaker as shown.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2018-03-27 02:27:18 AM.
Step 11
Use a soldering iron to desolder thered and black speaker wires fromthe speaker.
Mattel Loopz Speaker Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8