Contents of the Course

Basic mathematics for modelling.

Introduction to MATLAB and Simulink.

Parameters for modelling and consideration.

Mathematical modelling of power electronic systems.

Open loop control of power electronics system

Closed loop control of power electronics systems

Application of power electronics system Motor drive

Trouble-shooting in MATLAB during simulation

Chairman

Dr. R. Rudramoorthy

Principal, PSG College of Technology

Convenor

Dr. B. Vinod, HoD

Coordinators

B. Bindu, Assistant Professor

A. Sivaranjani, Assistant Professor

J. Joe Brislin, Assistant Professor

The details of this National Workshop are available at

www.psgtech.edu

Course Fee

For UG & PG Students : Rs. 1000/-

For academicians and practicing engineers : Rs. 1500/-

(Inclusive of service tax)

The course fee includes cost towards course material, working lunch and refreshments.

Registration details

Registration for workshop can be made by sending the duly filled application form along with a Demand Draft drawn in favor of PSG CNCE payable at Coimbatore on or before 22.06.2015.

Application forms can be downloaded from the College website or photocopies of the same can be used.

The duly filled in application forms may be send to:

Ms. A. Sivaranjani

Coordinator

Department of RAE

PSG College of Technology

Coimbatore - 641004

Contact No: 8754342821 / 9489193360

Email: HYPERLINK "mailto:bdu@rae.psgtech.ac.in"bdu@rae.psgtech.ac.in / HYPERLINK "mailto:asr@rae.psgtech.ac.in"asr@rae.psgtech.ac.in / HYPERLINK "mailto:jjb@rae.psgtech.ac.in"jjb@rae.psgtech.ac.in

Important Dates to Remember

Last date for receipt of application22.06.2015Date of Intimation (Acceptance)24.06.2015

PSG COLLEGE OF TECHNOLOGY COIMBATORE

National Workshop on

MODELLING AND SIMULATION OF POWER ELECTRONIC CONVERTERS USING SIMULINK

2 - 3 July 2015

Department of Robotics and Automation Engineering

PSG College of Technology

Coimbatore 641 004

Tamil Nadu

Phone: 0422-2572177, 2572477

Fax: 0422-2573833

About the College

PSG College of Technology established in 1951, is one of the many educational institutions nurtured by PSG & Sons Charities Trust. The college is Government Aided, Autonomous, ISO 9001 2008 certified and affiliated to Anna University. Equipped with latest facilities and excellent infrastructures, the college offers a total of 70 full time and part time programs in Science, Engineering and Management at UG & PG levels. The institution has a strong alumni base, most of them occupying coveted positions in many educational, industrial and research organizations all over the world. Currently more than 520 research scholars, both full time and part time, are working for their Ph.D. degree.

The College has developed 45 centres of excellence in various disciplines. More research facilities have been created in tie-up with numerous leading industries in worldwide.

About the Department

The Department of Robotics and Automation Engineering has been established in order to meet the growing demand for trained man power in the field of Industrial Automation. The department has a Research & Development Laboratory, Computer centre and E-Yantra Robotics laboratory. Tektronix robotic kits and a Humanoid Robot (NAO) have been bought for research purposes. The department has already established centres of excellence, namely, PSG-Adept Centre for Robotics with Adept Robotics USA, Centre for Advanced CNC and Robotics with Fanuc India Limited, PSG- Siemens Centre of Excellence in Automation with Siemens, PSG-Danfoss Centre of Excellence for Climate and Energy with Danfoss. Additionally, the department is in the process of establishing many laboratories for research as well as academic purposes.

DEPARTMENT OF ROBOTICS AND AUTOMATION ENGINEERING

PSG COLLEGE OF TECHNOLOGY COIMBATORE 641 004

National Workshop on

MODELLING AND SIMULATION OF POWER ELECTRONIC CONVERTERS USING SIMULINK

2 - 3 July 2015

APPLICATION FORM

Name (in Block Letters):

Date of birth & Age:

Qualification: .......

Experience: .

Designation & Dept.:

Organization:.....................................................................................

Address for Communication:

Office No.: Mobile No.:

Email Id:

Demand Draft No. & Bank: .

Amount in Rs. .

DECLARATION BY THE CANDIDATE

The given information is true to the best of my knowledge. I agree to abide by the rules and regulations governing the programme. If selected, I shall attend the course for the entire duration.

Place:

Date: Signature of the candidate

Power Electronics systems

Power electronics has already found an important place in modern technology and has revolutionized control of power and energy. As the voltage and current ratings and switching characteristics of power semiconductor devices keep improving, the range of applications continues to expand in areas such as lamp controls, power supplies to motion control, factory automation, transportation, energy storage, multimegawatt industrial drives, and electric power transmission and distribution. In order to keep up, working engineers involved in control and conversion of power and energy applications ranging from several hundred voltages at a fraction of an ampere for display devices to about 10kV at high-voltage dc transmission, should have a working knowledge of power electronics.

Objective of this workshop

This workshop intends to make beneficiaries well versed with the concepts power electronics systems. MATLAB is an excellent pedagogical tool that bridges the gap between circuit analysis and circuit simulation. In addition to the numerical capabilities of MATLAB, the variety of graphical features greatly assists in the understanding of a circuit problem. From a circuit functional point of view, MATLAB excels in terms of ease of use and speed of simulation. This course encompasses simple and basic power electronics systems to sophisticated motor control systems. Participants will learn to model the system mathematically and then simulate the system in MATLAB. The crucial details for modeling and the various factors to be analysed for high system performance will also be discussed. The course will enable the faculty and industrial persons to have a clear view of the concepts. It will highly help the students in developing MATLAB models for their projects.