Material Services Hollow Bars · 2019-03-08 · TK-T103B 103 100.00 51 5,680 3,460 2,730 44.60 6 /...
Transcript of Material Services Hollow Bars · 2019-03-08 · TK-T103B 103 100.00 51 5,680 3,460 2,730 44.60 6 /...
Hollow Bars
Material Services Infrastructure
TK-R & TK-T
Hollow Bar SystemsApplications:
• Tunneling
• Slope Stabilization
• Soil Nailing
• Micropiles
The TK-R and TK-T hollow bar systems are self-drilling anchors, suitable for drilling with percussion or high-torque drilling without percussion and are fast to install.
The core of our self-drilling anchor system is a hot-rolled thick-walled tube. The TK hollow bar is available in steel grades 40CR, 20CR & Q34B manufactured in accordance with EN10083/3-2006 / EN10084-2008 / EN10025/2-2004.
When using a suitable drill head in combination with sufficient drilling capacity and the right skills, TK hollow bar can be installed in every soil condition.
TK hollow bar is suitable for both temporary and permanent applications and is a particularly durable product, protected against corrosion when imbedded into a cement stone body When additional corrosion protection is required, thyssenkrupp Infrastructure can offer, for both the TK-R and TK-T series:
• Sacrificial corrosion (design principal)• Hot dipped galvanizing• Epoxy coating
We can also offer full-scale stock of all necessary components such as couplings, nuts, drill bits (for various soil conditions), centralisers, and plates. Products are manufactured by
3
TECHNICAL DATA
Nominal Thread Diameter
External Diameter
Average Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Elongation (A100mm)
Steel Standard
mm mm mm mm2 kN kN kg/m L/R ≥%
TK-R25 25 23.00 12 292 200 150 2.30 ISO 10208
6 / 10 EN10083/3-2006EN10084-2008EN10025/2-2004TK-R32A 32 29.60 21 356 260 200 2.80 6 / 10
TK-R32B 32 29.60 20 363 280 230 2.85 6 / 10
TK-R32C 32 29.60 18 433 280 230 3.30 6 / 10
TK-R32D 32 29.60 17 440 360 280 3.40 6 / 10
TK-R32E 32 29.60 14 522 405 300 4.10 6 / 10
TK-R38A 38 36.30 22 611 500 400 4.80 6 / 10
TK-R38B 38 36.30 19 700 500 400 5.50 6 / 10
TK-R51A 51 48.30 36 713 550 450 6.30 ISO 1720
6 / 10
TK-R51B 51 48.30 33 993 800 630 7.80 6 / 10
TK-R Series Hollow Bar
4
TECHNICAL DATA
Nominal Thread Diameter
External Diameter
Average Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Elongation (A100mm)
Steel Standard
mm mm mm mm2 kN kN kg/m L/R ≥%
TK-T30A 30 27.00 16 343 220 180 2.70 Int. Standard
6 / 10 EN10083/3-2006EN10084-2008EN10025/2-2004TK-T30B 30 27.00 14 356 260 220 2.80 6 / 10
TK-T30C 30 27.00 11 406 320 260 3.25 6 / 10
TK-T40A 40 38.40 21 713 540 430 5.60 6 / 10
TK-T40B 40 38.40 16 910 660 525 7.15 6 / 10
TK-T52 52 48.40 26 1,250 929 730 9.90 6 / 10
TK-T73A 73 70.90 56 1,369 1,035 830 10.75 6 / 10
TK-T73B 73 70.90 53 1,680 1,160 970 13.20 6 / 10
TK-T73C 73 70.90 45 2,267 1,575 1,270 17.80 6 / 10
TK-T73D 73 70.90 35 2,700 1,865 1,430 21.20 6 / 10
TK-T76A 76 72.80 51 2,000 1,600 1,200 16.50 6 / 10
TK-T76B 76 72.80 47 2,400 1,900 1,500 19.00 6 / 10
TK-T103A 103 100.00 78 3,220 2,280 1,800 25.30 6 / 10
TK-T103B 103 100.00 51 5,680 3,460 2,730 44.60 6 / 10
TK-T Series Hollow Bar
5
TK-R Hollow Bar
Self Drilling
Anchor Systems
Anchor Nut
Drill Bit Adaptor
Centralizer
Anchor Coupling
Drill Bit
Anchor Plate
Anchor Bar
TK-R25 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm² kN kN kg/m L/R m
TK-R25 25 12 292 200 150 2.30 ISO 10208
EN100083 - 1
Left or Right
(1) x2, x3, x4, x5, x6, x7, x8,x9,x10
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R25 41 35 25-30 ISO 10208 CK45 0.25 Left or Right
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm HRC kg
TK-R25 150 x 150 8 30 1.40
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R25 36 150 25-30 ISO 10208 EN100083 - 1 0.60 Left or Right
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-R25 EX Hardened cross bit for loose to medium dense ground conditions
42 / 0.3051 / 0.40
50-55 ISO 10208 EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
42 / 0.3051 / 0.42
87-89
ESF Hardened button bit for unconsolidated rock with boulders
42 / 0.2551 / 0.42
50-55
ESSF TC button bit for medium rock formations
42 / 0.3051 / 0.42
87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-R25 TK-R25 TK-R32 / TK-R38 / TK-T40 50 0.10
7
TK-R32 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm² kN kN kg/m L/R m
TK-R32A 32 21 356 260 200 2.80 ISO 10208
EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6, x7, x8, x8, x9TK-R32B 20 363 280 230 2.85
TK-R32C 18 433 280 230 3.30
TK-R32D 17 440 360 280 3.40
TK-R32E 14 522 405 300 4.10
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R32A 46 45 25-30 ISO 10208 CK45 0.35 Left or Right
TK-R32B
TK-R32C
TK-R32D 65 0.53
TK-R32E
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-R32A 200 x 200 10 35 3.00
TK-R32B
TK-R32C
TK-R32D 12 3.30
TK-R32E
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R32A 42 145 23-30 ISO 10208 EN100083 - 1 0.72 Left or Right
TK-R32B 160 0.80
TK-R32C 160 0.80
TK-R32D 190 0.96
TK-R32E 190 0.96
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
8
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-R32 72 30 41 CK45 0.30
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-R32 EX Hardened cross bit for loose to medium dense ground conditions
D51 / 0.35D76 / 0.75D90 / 1.60
50-55 ISO 10208 EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D51 / 0.40D76 / 1.20D90 / 2.30
87-89
ESF Hardened button bit for unconsolidated rock with boulders
D51 / 0.42D76 / 1.25
50-55
ESSF TC button bit for medium rock formations
D51 / 0.47D76 / 1.60D90 / 1.90
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D76 / 0.55D90 / 1.06
43-48
EC Hardened arching bit for unconsolidated soil with small boulders
D51 / 0.35D76 / 1.16
43-48
ECC TC arching bit for soft to medium rock formations
D51 / 0.40D76 / 0.85
87-89
EY Hardened drop Centre bit for fills D76 / 0.97D90 / 1.35
50-55
EYY TC drop center bit for Competent Ground & Strong Rock
D76 / 0.98D90 / 1.40
87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-R32 TK-R32 TK-R38 / TK-R51 / TK-T40 / TK-T52 50 0.1
9
TK-R38 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-R38A 38 22 611 500 400 4.80 ISO 10208
EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6
TK-R38B 19 700 500 400 5.50
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R38A 50 60 25-30 ISO 10208 CK45 0.50 Left or Right
TK-R38B
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-R38A 200 x 200 12 41 3.60
TK-R38B
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R38A 52 220 23-30 ISO 10208 EN100083 - 1 1.80 Left or Right
TK-R38B
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-R38 72 41 50 CK45 0.30
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
10
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-R38 EX Hardened cross bit for loose to medium dense ground conditions
D76 / 0.75D90 / 1.55D100 / 1.80
50-55 ISO 10208 EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D76 / 1.06D90 / 1.80D100 / 1.90
87-89
ESF Hardened button bit for unconsolidated rock with boulders
D76 / 1.15D90 / 1.54D100 / 2.00
50-55
ESD D115 / 2.30 50-55
ESSF TC button bit for medium rock formations
D76 / 1.40D90 / 1.85 D100 / 2.70D115 / 3.60
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D76 / 0.73D90 / 0.83D100 / 1.00D110 / 1.15D115 / 1.00D130 / 1.80D150 / 2.80
43-48
EC Hardened arching bit for unconsolidated soil with small boulders
D76 / 1.15D90 / 1.50D115 / 2.60
43-48
ECC TC arching bit for soft to medium rock formations
D76 / 1.15D90 / 1.60D110 / 2.45D115 / 2.80
87-89
EY Hardened drop centre bit for fills D76 / 0.85D90 / 1.10D130 / 2.75
50-55
EYY TC drop centre bit for Competent Ground & Strong Rock
D76 / 1.05D90 / 1.30D115 / 2.15
87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-R38 TK-R38 TK-R51 / TK-T52 / TK-T73 / TK-T76 50 0.20
11
TK-R51 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-R51A 51 36 713 550 450 6.30 ISO 1720 EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6
TK-R51B 33 993 800 630 7.80
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R51A 75 70 25-30 ISO 1720 CK45 1.50 Left or Right
TK-R51B
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-R51A 200 x 200 30 60 8.80
TK-R51B 250 x 250 40 60 18.50
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-R51A 63 140 23-30 ISO 1720 EN100083 - 1 1.26 Left or Right
TK-R51B 200 1.90
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-R51 90 54 60 CK45 0.36
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
12
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-R51 EX Hardened cross bit for loose to medium dense ground conditions
D90 / 1.60D115 / 2.50
50-55 ISO 1720 EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D90 / 1.75D100 / 2.50D115 / 2.80D130 / 4.00D150 / 5.50
87-89
ESF Hardened button bit for unconsolidated rock with boulders
D90 / 1.35 D100 / 1.50
50-55
ESD D115 / 2.10 50-55
ESSF TC button bit for medium rock formations
D90 / 1.90D100 / 2.40D115 / 3.50D130 / 5.00D150 / 6.20
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D130 / 1.85D150 / 2.40
43-48
EC Hardened arching bit for unconsolidated soil with small boulders
D115 / 2.30 43-48
ECC TC arching bit for soft to medium rock formations
D115 / 2.70 87-89
EY Hardened drop centre bit for fills D115 / 2.10 50-55
EYY TC drop centre bit for Competent Ground & Strong Rock
D115 / 2.20 87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-R51 TK-T73 / TK-T76 50 50 0.20
13
TK-T Hollow Bar
Self Drilling
Anchor Systems
Anchor Nut
Drill Bit Adaptor
Centralizer
Anchor Coupling
Drill Bit
Anchor Plate
Anchor Bar
TK-T30 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T30A 30 16 343 220 180 2.70 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6, x7, x8, x9, x10TK-T30B 14 356 260 220 2.80
TK-T30C 11 406 320 260 3.25
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T30A 46 35 25-30 T International Standard
CK45 0.36 Left or Right
TK-T30B
TK-T30C
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T30A 200 x 200 8 36 2.46
TK-T30B
TK-T30C
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T30A 38 105 23-30 T International standard
EN100083 0.42 Left or Right
TK-T30B
TK-T30C
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T30 88 37 36 CK45 0.27
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
15
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T30 EX Hardened cross bit for loose to medium dense ground conditions
D42 / 0.30D46 / 0.32D51 / 0.40D76 / 0.56
50-55 T International Standard
EN10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D42 / 0.30D46 / 0.32D51 / 0.40
87-89
ESF Hardened button bit for unconsolidated rock with boulders
D42 / 0.30D46 / 0.32D51 / 0.40
50-55
ESSF TC button bit for medium rock formations
D46 / 0.45D51 / 0.69
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D76 / 0.56D90 / 0.90
43-48
EC Hardened arching bit for unconsolidated soil with small boulders
D51 / 0.36 43-48
ECC TC arching bit for soft to medium rock formations
D51 / 0.40 87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-T30 TK-T30 TK-R38 / TK-T40 50 0.10
16
TK-T40 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T40A 40 21 713 540 430 5.60 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6
TK-T40B 16 910 660 525 7.15
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T40A 65 50 25-30 T International Standard
CK45 0.85 Left or Right
TK-T40B
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T40A 200 x 200 12 54 3.50
TK-T40B 15 54 4.58
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T40A 54 140 23-30 T International Standard
EN100083 - 1 1.15 Left or Right
TK-T40B 57 1.54
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T40 88 40 44 CK45 0.40
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
17
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T40 EX Hardened cross bit for loose to medium dense ground conditions
D76 / 0.90D90 / 1.50D100 / 1.65D115 / 2.60
50-55 T International Standard
EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D76 / 1.20D90 / 1.75D100 / 2.00D115 / 2.80D130 / 3.10D150 / 5.00
87-89
ESF Hardened button bit for unconsolidated rock with boulders
D76 / 1.15D90 / 1.68D110 / 2.15D115 / 2.30D130 / 3.15
50-55
ESSF TC button bit for medium rock formations
D70 / 1.78D76 / 1.40D90 / 1.85D100 / 2.00D115 / 2.80D130 / 4.92
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D90 / 0.87D130 / 1.75D150 / 2.32
43-48
EC Hardened arching bit for unconsolidated soil with small boulders
D90 / 1.45D115 / 2.88
50-55
ECC TC arching bit for soft to medium rock formations
D90 / 1.55D100 / 1.66D115 / 2.95
87-89
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-T40 TK-T40 TK-R51 / TK-T52 / TK-T73 / TK-T76
50 0.20
18
TK-T52 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T52 52 26 1,250 929 730 9.90 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4, x5, x6
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T56 80 70 25-30 T International Standard
CK45 2.35 Left or Right
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T52 220 x 220 35 65 12.10
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T52 70 160 23-30 T International Standard
EN100083 - 1 2.30 Left or Right
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T52 112 70 68 CK45 1.20
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
19
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T52 EX Hardened cross bit for loose to medium dense ground conditions
D115 / 2.60 50-55 T International Standard
EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D115 / 2.60D130 / 2.80D150 / 4.50
87-89
ESD Hardened button bit for unconsolidated rock with boulders
D115 / 2.10 50-55
ESSF TC button bit for medium rock formations
D100 / 2.50D115 / 3.70
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D130 / 1.85D150 / 2.40
43-48
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-T52 TK-T52 TK-T73 / TK-T76 50 0.60
20
TK-T73 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T73A 73 56 1,369 1,035 830 10.75 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4
TK-T73B 53 1,680 1,160 970 13.20
TK-T73C 45 2,267 1,575 1,270 17.80
TK-T73D 35 2,700 1,865 1,430 21.20
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T73A 95 70 25-30 T International Standard
CK45 2.20 Left or Right
TK-T73B
TK-T73C
TK-T73D
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T73A 250 x 250 40 80 18.00
TK-T73B
TK-T73C
TK-T73D
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T73A 89 235 23-30 T International Standard
EN100083 - 1 4.33 Left or Right
TK-T73B
TK-T73C 95 245 6.20
TK-T73D
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T73 130 80 87 CK45 1.20
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
21
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T73 EX Hardened cross bit for loose to medium dense ground conditions
D130 / 3.30D170 / 5.50
50-55 T International Standard
EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
D130 / 4.20D150 / 5.70D200 / 10.00
87-89
ESD Hardened button bit for unconsolidated rock with boulders
D130 / 4.90 50-55
ESSF TC button bit for medium rock formations
D110 / 3.85D130 / 6.90
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D130 / 2.80D150 / 2.90
43-48
DRILL BIT ADAPTER
Anchor Bar Thread Drill Bit Thread Length Unit Weight
mm kg
TK-T73 TK-T73 TK-T103 50 1.30
22
TK-T76 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T76A 76 51 2,000 1,600 1,200 16.50 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4
TK-T76B 76 47 2,400 1,900 1,500 19.00
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T76A 100 80 25-30 T International Standard
CK45 2.66 Left or Right
TK-T76B
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T76A 250 x 250 40 80 19.10
TK-T76B
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T76A 95 200 23-30 T International Standard
EN100083 - 1 4.30 Left or Right
TK-T76B 97 220 5.35
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T76 EX Hardened cross bit for loose to medium dense ground conditions
130 / 3.30170 / 5.50
50-55 T International Standard
EN 10083-1 Left or Right
EXX TC cross bit for soft to medium rock formations
130 / 4.60150 / 5.70200 / 10.00
87-89
ESD Hardened button bit for unconsolidated rock with boulders
130 / 4.90170 / 7.00
50-55
ESSF TC button bit for medium rock formations
120 / 3.65130 / 6.30150 / 6.60
87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
130 / 2.60150 / 2.70
43-48
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T76 126 60 91 CK45 1.16
23
TK-T103 Self Drilling Anchor System
ANCHOR BAR
Outside Diameter
Internal Diameter
Cross Sectional Area
Ultimate Load
Yield Load
Weight Thread Type
Type of Steel
Thread Length
mm mm mm2 kN kN kg/m L/R m
TK-T103A 103 78 3,220 2,280 1,800 25.30 T Inter-national Standard
EN100083 - 1
Left or Right
(1) x 2, x3, x4
TK-T103B 51 5,680 3,460 2,730 44.60
ANCHOR NUT
Key Size Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T103A 125 80 25-30 T International Standard
CK45 3.42 Right
TK-T103B
ANCHOR PLATE
Size Thickness Hole Diameter Unit Weight
mm mm mm kg
TK-T103A 300 x 300 50 110 32.60
TK-T103B
ANCHOR COUPLING
Outside Diameter Length Hardness Thread Type Type of Steel Unit Weight Thread
mm mm HRC kg L/R
TK-T103A 123 255 23-30 T International Standard
EN100083 - 1 7.45 Right
TK-T103B 132 290 12.50
DRILL BIT
Outside Diameter / Unit Weight
Hardness Thread Type Type of Steel Thread
mm / kg HRC/HRA L/R
TK-T103 EXX TC cross bit for soft to medium rock formations
D175 / 7.66 87-89 T International Standard
EN 10083-1 Right
ESSF TC button bit for medium rock formations
D175 / 11.12 87-89
EW Clay and loam, sandy-cohesive mixed soils without obstructions
D220 / 12.50 D280 / 13.50
43-48
Options of Anti-Corrosion: Epoxy Coating | Hot-dipped Galvanization: Standard ISO 1461 | Adhesion: Standard ISO 2409:2007
CENTRALISER
Outside Diameter Length Hole Diameter Type of Steel Unit Weight
mm mm mm kg
TK-T103 165 80 110 CK45 2.93
24
Notes
25
Notes
26
thyssenkrupp Infrastructure
PO Box 5128, Chatswood NSW 2067 Australia T: +61 2 8448-3555 E: [email protected] www.thyssenkrupp-infrastructure.com.au